In order to realize the higher bit rates compared for the fifth-generation (5G) mobile communication system, massive MIMO technologies in higher frequency bands with wider bandwidth are being investigated for 5G evolution and 6G. One of practical method to realize massive MIMO in the high frequency bands is hybrid beamforming (BF). With this approach, user selection is an important function because its performance is highly affected by inter-user interference. However, the computational complexity of user selection in multi-user massive MIMO is high because MIMO channel matrix size excessive. Furthermore, satisfying user fairness by proportional fairness (PF) criteria leads to further increase of the complexity because re-calculation of precoding and postcoding matrices is required for each combination of selected users. To realize a fair and low-complexity user selection algorithm for multi-user massive MIMO employing hybrid BF, this paper proposes a two-step user selection algorithm that combines PF based user selection and chordal distance user selection. Computer simulations show that the proposed two-step user selection algorithm with higher user fairness and lower computational complexity can achieve higher system performance than the conventional user selection algorithms.

Software watermarking enables one to embed some information called “mark” into a program while preserving its functionality, and to read it from the program. As a definition of function preserving, Cohen et al. (STOC 2016) proposed statistical function preserving which requires that the input/output behavior of the marked circuit is identical almost everywhere to that of the original unmarked circuit. They showed how to construct watermarkable cryptographic primitives with statistical function preserving, including pseudorandom functions (PRFs) and public-key encryption from indistinguishability obfuscation. Recently, Goyal et al. (CRYPTO 2019) introduced more relaxed definition of function preserving for watermarkable signature. Watermarkable signature embeds a mark into a signing circuit of digital signature. The relaxed function preserving only requires that the marked signing circuit outputs valid signatures. They provide watermarkable signature with the relaxed function preserving only based on (standard) digital signature. In this work, we introduce an intermediate notion of function preserving for watermarkable signature, which is called computational function preserving. Then, we examine the relationship among our computational function preserving, relaxed function preserving by Goyal et al., and statistical function preserving by Cohen et al. Furthermore, we propose a generic construction of watermarkable signature scheme satisfying computational function preserving based on public key encryption and (standard) digital signature.

In daily reality, people often pay attention to several objects that change positions while being observed. In the laboratory, this process is investigated by a phenomenon known as multiple object tracking (MOT) which is a task that evaluates attentive tracking performance. Recent findings suggest that the attentional set for multiple moving objects whose depth changes in three dimensions from one plane to another is influenced by the initial configuration of the objects. When tracking objects, it is difficult for people to expand their attentional set to multiple-depth planes once attention has been focused on a single plane. However, less is known about people contracting their attentional set from multiple-depth planes to a single-depth plane. In two experiments, we examined tracking accuracy when four targets or four distractors, which were initially distributed on two planes, come together on one of the planes during an MOT task. The results from this study suggest that people have difficulty changing the depth range of their attention during attentive tracking, and attentive tracking performance depends on the initial attentional set based on the configuration prior to attentive tracking.

In this paper, we address the problem of detector design in severely frequency-selective channels for spatial multiplexing systems that adopt filter bank multicarrier based on offset quadrature amplitude modulation (FBMC/OQAM) as the communication waveforms. We consider decision feedback equalizers (DFEs) that use multiple feedback filters to jointly cancel the post-cursor components of inter-symbol interference, inter-antenna interference, and, in some configuration, inter-subchannel interference. By exploiting the special structures of the correlation matrix and the staggered property of the FBMC/OQAM signals, we obtain an efficient method of computing the DFE coefficients that requires a smaller number of multiplications than the linear equalizer (LE) and conventional DFE do. The simulation results show that the proposed detectors considerably outperform the LE and conventional DFE at moderate-to-high signal-to-noise ratios.

This review provides a current overview of the fabrication processes for superconducting digital circuits at CRAVITY (clean room for analog and digital superconductivity) at the National Institute of Advanced Industrial Science and Technology (AIST), Japan. CRAVITY routinely fabricates superconducting digital circuits using three types of fabrication processes and supplies several thousand chips to its collaborators each year. Researchers at CRAVITY have focused on improving the controllability and uniformity of device parameters and the reliability, which means reducing defects. These three aspects are important for the correct operation of large-scale digital circuits. The current technologies used at CRAVITY permit ±10% controllability over the critical current density (Jc) of Josephson junctions (JJs) with respect to the design values, while the critical current (Ic) uniformity is within 1σ=2% for JJs with areas exceeding 1.0 µm2 and the defect density is on the order of one defect for every 100,000 JJs.

The microfabrication technique based on synchrotron radiation (SR) direct etching process has recently been applied to construct PTFE microstructures. This paper proposes a PTFE substrate integrated waveguide (PTFE SIW). It is expected that the PTFE SIW contributes to the improvement of the structural strength. A rectangular through-hole is introduced taking the advantage of the SR direct etching process. First, a PTFE SIW for the Q-band is designed. Then, a cruciform 3-dB directional coupler consisting of the PTFE SIW is designed and fabricated by the SR direct etching process. The validity of the PTFE SIW coupler is confirmed by measuring the frequency characteristics of the S-parameters. The mechanical strength of the PTFE SIW and the peeling strength of its Au film are also additionally investigated.

A universal interconnection network implements arbitrary interconnections among n terminals. This paper considers a problem to realize such a network using contact switches. When n=2, it can be implemented with a single switch. The number of different connections among n terminals is given by the Bell number B(n). The Bell number shows the total number of methods to partition n distinct elements. For n=2, 3, 4, 5 and 6, the corresponding Bell numbers are 2, 5, 15, 52, and 203, respectively. This paper shows a method to realize an n terminal universal interconnection network with $rac {3}{8}(n^2-1)$ contact switches when n=2m+1≥5, and $rac {n}{8}(3n+2)$ contact switches, when n=2m≥6. Also, it shows that a lower bound on the number of contact switches to realize an n-terminal universal interconnection network is ⌈log 2B(n)⌉, where B(n) is the Bell number.

Data parallelism is the dominant method used to train deep learning (DL) models on High-Performance Computing systems such as large-scale GPU clusters. When training a DL model on a large number of nodes, inter-node communication becomes bottle-neck due to its relatively higher latency and lower link bandwidth (than intra-node communication). Although some communication techniques have been proposed to cope with this problem, all of these approaches target to deal with the large message size issue while diminishing the effect of the limitation of the inter-node network. In this study, we investigate the benefit of increasing inter-node link bandwidth by using hybrid switching systems, i.e., Electrical Packet Switching and Optical Circuit Switching. We found that the typical data-transfer of synchronous data-parallelism training is long-lived and rarely changed that can be speed-up with optical switching. Simulation results on the Simgrid simulator show that our approach speed-up the training time of deep learning applications, especially in a large-scale manner.

Recently, the controllability of complex networks has become a hot topic in the field of network science, where the driver nodes play a key and central role. Therefore, studying their structural characteristics is of great significance to understand the underlying mechanism of network controllability. In this paper, we systematically investigate the nodal centrality of driver nodes in controlling complex networks, we find that the driver nodes tend to be low in-degree but high out-degree nodes, and most of driver nodes tend to have low betweenness centrality but relatively high closeness centrality. We also find that the tendencies of driver nodes towards eigenvector centrality and Katz centrality show very similar behaviors, both high eigenvector centrality and high Katz centrality are avoided by driver nodes. Finally, we find that the driver nodes towards PageRank centrality demonstrate a polarized distribution, i.e., the vast majority of driver nodes tend to be low PageRank nodes whereas only few driver nodes tend to be high PageRank nodes.

In this letter, we investigate tight analytical and asymptotic upper bounds for bit error rate (BER) of constitutional codes over exponentially correlated Nakagami-m fading channels. Specifically, we derive the BER expression depending on an exact closed-form formula for pairwise error event probabilities (PEEP). Moreover, the corresponding asymptotic analysis in high signal-to-noise ratio (SNR) regime is also explored, which is verified via numerical results. This allows us to have explicit insights on the achievable coding gain and diversity order.

Codebooks with small inner-product correlation have applied in direct spread code division multiple access communications, space-time codes and compressed sensing. In general, it is difficult to construct optimal codebooks achieving the Welch bound or the Levenstein bound. This paper focuses on constructing asymptotically optimal codebooks with characters of cyclic groups. Based on the proposed constructions, two classes of asymptotically optimal codebooks with respect to the Welch bound are presented. In addition, parameters of these codebooks are new.

Many scientific and technological resources (STR) cannot meet the needs of real demand-based industrial services. To address this issue, the characteristics of scientific and technological resource services (STRS) are analyzed, and a method of the optimal combination of demand-based STR based on multi-community collaborative search is then put forward. An optimal combined evaluative system that includes various indexes, namely response time, innovation, composability, and correlation, is developed for multi-services of STR, and a hybrid optimal combined model for STR is constructed. An evaluative algorithm of multi-community collaborative search is used to study the interactions between general communities and model communities, thereby improving the adaptive ability of the algorithm to random dynamic resource services. The average convergence value CMCCSA=0.00274 is obtained by the convergence measurement function, which exceeds other comparison algorithms. The findings of this study indicate that the proposed methods can preferably reach the maximum efficiency of demand-based STR, and new ideas and methods for implementing demand-based real industrial services for STR are provided.

Blockchain-based voting, including liquid voting, has been extensively studied in recent years. However, it remains challenging to implement liquid voting on blockchain using Ethereum smart contract. The challenge comes from the gas limit, which is that the number of instructions for processing a ballot cannot exceed a certain amount. This restricts the application scenario with respect to algorithms whose time complexity is linear to the number of voters, i.e., O(n). As the blockchain technology can well share and reuse the resources, we study a model of liquid voting on blockchain and propose a fast algorithm, named Flash, to eliminate the restriction. The key idea behind our algorithm is to shift some on-chain process to off-chain. In detail, we first construct a Merkle tree off-chain which contains all voters' properties. Second, we use Merkle proof and interval tree to process each ballot with O(log n) on-chain time complexity. Theoretically, the algorithm can support up to 21000 voters with respect to the current gas limit on Ethereum. Experimentally, the result implies that the consumed gas fee remains at a very low level when the number of voters increases. This means our algorithm makes liquid voting on blockchain practical even for massive voters.

As an important type of science and technology service resource, energy consumption data play a vital role in the process of value chain integration between home appliance manufacturers and the state grid. Accurate electricity consumption prediction is essential for demand response programs in smart grid planning. The vast majority of existing prediction algorithms only exploit data belonging to a single domain, i.e., historical electricity load data. However, dependencies and correlations may exist among different domains, such as the regional weather condition and local residential/industrial energy consumption profiles. To take advantage of cross-domain resources, a hybrid energy consumption prediction framework is presented in this paper. This framework combines the long short-term memory model with an encoder-decoder unit (ED-LSTM) to perform sequence-to-sequence forecasting. Extensive experiments are conducted with several of the most commonly used algorithms over integrated cross-domain datasets. The results indicate that the proposed multistep forecasting framework outperforms most of the existing approaches.

In this letter, a method for the construction of polar codes based on the mutual information approximation (MIA) is proposed for the 4Tb/in2 two-dimensional inter-symbol interference (2D-ISI) channels, such as the bit-patterned magnetic recording (BPMR) and two-dimensional magnetic recording (TDMR). The basic idea is to exploit the MIA between the input and output of a 2D detector to establish a log-likelihood ratio (LLR) distribution model based on the MIA results, which compensates the gap caused by the 2D ISI channel. Consequently, the polar codes obtained by the optimization techniques previously developed for the additive white Gaussian noise (AWGN) channels can also have satisfactory performances over 2D-ISI channels. Simulated results show that the proposed polar codes can outperform the polar codes constructed by the traditional methods over 4Tb/in2 2D-ISI channels.

This paper proposes out-of-bound signal demapping for lattice reduction-aided iterative linear receivers in overloaded MIMO channels. While lattice reduction aided linear receivers sometimes output hard-decision signals that are not contained in the modulation constellation, the proposed demapping converts those hard-decision signals into binary digits that can be mapped onto the modulation constellation. Even though the proposed demapping can be implemented with almost no additional complexity, the proposed demapping achieves more gain as the linear reception is iterated. Furthermore, we show that the transmission performance depends on bit mapping in modulations such as the Gray mapping and the natural mapping. The transmission performance is confirmed by computer simulation in a 6 × 2 MIMO system, i.e., the overloading ratio of 3. One of the proposed demapping called “modulo demapping” attains a gain of about 2 dB at the packet error rate (PER) of 10-1 when the 64QAM is applied.

In this paper, we propose a design method for a diplexer using a surface acoustic wave (SAW) filter, a multilayer ceramic filter, chip inductors, and chip capacitors. A controllable transmission zero can be created in the stopband by designing matching circuits based on the out-of-band characteristics of the SAW filter using this method. The proposed method can achieve good attenuation performance and a compact size because it does not use an additional resonator for creating the controllable transmission zero and the matching circuits are composed of only five components. A diplexer is designed for 2.4 GHz wireless systems and a global positioning system receiver using the proposed method. It is compact (8.0 mm × 8.0 mm), and the measurement results indicate good attenuation performance with the controllable transmission zero.

In this study, we conduct guided mode analyses for chalcogenide glass channel waveguides using As2Se3 core and As2S3 lower cladding to determine their single-mode conditions across the astronomical N-band (8-12µm). The results reveal that a single-mode operation over the band can be achieved by choosing a suitable core-thickness.

This paper theoretically presents that a terahertz (THz) oscillator using a resonant tunneling diode (RTD) and a rectangular cavity, which has previously been proposed, can radiate high output power by the impedance matching between RTD and load through metal-insulator-metal (MIM) capacitors. Based on an established equivalent-circuit model, an equation for output power has been deduced. By changing MIM capacitors, a matching point can be derived for various sizes of rectangular-cavity resonator. Simulation results show that high output power is possible by long cavity. For example, a high output power of 5 mW is expected at 1 THz.

A classification function maps a set of vectors into several classes. A machine learning problem is treated as a design problem for partially defined classification functions. To realize classification functions for MNIST hand written digits, three different architectures are considered: Single-unit realization, 45-unit realization, and 45-unit ×r realization. The 45-unit realization consists of 45 ternary classifiers, 10 counters, and a max selector. Test accuracy of these architectures are compared using MNIST data set.