A light field, which is equivalent to a dense set of multi-view images, has various applications such as depth estimation and 3D display. One of the essential problems in light field applications is light field interpolation, i.e., view interpolation. The interpolation accuracy is enhanced by exploiting an inherent property of a light field. One example is that an epipolar plane image (EPI), which is a 2D subset of the 4D light field, consists of many lines, and these lines have almost the same slope in a local region. This structure induces a sparse representation in the frequency domain, where most of the energy resides on a line passing through the origin. On the basis of this observation, we propose a group sparsity prior suitable for light fields to exploit their line structure fully for interpolation. Specifically, we designed the directional groups in the discrete Fourier transform (DFT) domain so that the groups can represent the concentration of the energy, and we thereby formulated an LF interpolation problem as an overlapping group lasso. We also introduce several techniques to improve the interpolation accuracy such as applying a window function, determining group weights, expanding processing blocks, and merging blocks. Our experimental results show that the proposed method can achieve better or comparable quality as compared to state-of-the-art LF interpolation methods such as convolutional neural network (CNN)-based methods.

(k,n)-visual secret sharing scheme ((k,n)-VSSS) is a method to divide a secret image into n images called shares that enable us to restore the original image by only stacking at least k of them without any complicated computations. In this paper, we consider (2,2)-VSSS to share two secret images at the same time only by two shares, and investigate the methods to improve the quality of decoded images. More precisely, we consider (2,2)-VSSS in which the first secret image is decoded by stacking those two shares in the usual way, while the second one is done by stacking those two shares in the way that one of them is used reversibly. Since the shares must have some subpixels that inconsistently correspond to pixels of the secret images, the decoded pixels do not agree with the corresponding pixels of the secret images, which causes serious degradation of the quality of decoded images. To reduce such degradation, we propose several methods to construct shares that utilize 8-neighbor Laplacian filter and halftoning. Then we show that the proposed methods can effectively improve the quality of decoded images. Moreover, we demonstrate that the proposed methods can be naturally extended to (2,2)-VSSS for RGB images.

In this paper, we propose the decomposition ring homomorphic encryption scheme, that is a homomorphic encryption scheme built on the decomposition ring, which is a subring of cyclotomic ring. By using the decomposition ring the structure of plaintext slot becomes ℤpl, instead of GF(pd) in conventional schemes on the cyclotomic ring. For homomorphic multiplication of integers, one can use the full of ℤpl slots using the proposed scheme, although in conventional schemes one can use only one-dimensional subspace GF(p) in each GF(pd) slot. This allows us to realize fast and compact homomorphic encryption for integer plaintexts. In fact, our benchmark results indicate that our decomposition ring homomorphic encryption schemes are several times faster than HElib for integer plaintexts due to its higher parallel computation.

High frame rate and ultra-low delay matching system plays an important role in various human-machine interactive applications, which demands better performance in matching deformable and out-of-plane rotating objects. Although many algorithms have been proposed for deformation tracking and matching, few of them are suitable for hardware implementation due to complicated operations and large time consumption. This paper proposes a hardware-oriented template update and recovery method for high frame rate and ultra-low delay deformation matching system. In the proposed method, the new template is generated in real time by partially updating the template descriptor and adding new keypoints simultaneously with the matching process in pixels (proposal #1), which avoids the large inter-frame delay. The size and shape of region of interest (ROI) are made flexible and the Hamming threshold used for brute-force matching is adjusted according to pixel position and the flexible ROI (proposal #2), which solves the problem of template drift. The template is recovered by the previous one with a relative center-shifting vector when it is judged as lost via region-wise difference check (proposal #3). Evaluation results indicate that the proposed method successfully achieves the real-time processing of 784fps at the resolution of 640×480 on field-programmable gate array (FPGA), with a delay of 0.808ms/frame, as well as achieves satisfactory deformation matching results in comparison with other general methods.

Real-time 3D players tracking plays an important role in sports analysis, especially for the live services of sports broadcasting, which have a strict limitation on processing time. For these kinds of applications, 3D trajectories of players contribute to high-level game analysis such as tactic analysis and commercial applications such as TV contents. Thus real-time implementation for 3D players tracking is expected. In order to achieve real-time for 60fps videos with high accuracy, (that means the processing time should be less than 16.67ms per frame), the factors that limit the processing time of target algorithm include: 1) Large image area of each player. 2) Repeated processing of multiple players in multiple views. 3) Complex calculation of observation algorithm. To deal with the above challenges, this paper proposes a representative spatial selection and temporal combination based real-time implementation for multi-view volleyball players tracking on the GPU device. First, the representative spatial pixel selection, which detects the pixels that mostly represent one image region to scale down the image spatially, reduces the number of processing pixels. Second, the representative temporal likelihood combination shares observation calculation by using the temporal correlation between images so that the times of complex calculation is reduced. The experiments are based on videos of the Final and Semi-Final Game of 2014 Japan Inter High School Games of Men's Volleyball in Tokyo Metropolitan Gymnasium. On the GPU device GeForce GTX 1080Ti, the tracking system achieves real-time on 60fps videos and keeps the tracking accuracy higher than 97%.

Multiple patterning lithography allows fine patterns beyond lithography limit, but it suffers from a large process cost. In this paper, we address a method to reduce the number of V0 masks; it consists of two sub-problems. First, stitch-induced via (SIV) is introduced to reduce the number of V0 masks. It involves the redesign of standard cells to replace some vias in V0 layer with SIVs, such that the remaining vias can be assigned to the reduced masks. Since SIV formation requires metal stitches in different masks, SIV replacement and metal mask assignment should be solved simultaneously. This sub-problem is formulated as integer linear programming (ILP). In the second sub-problem, inter-row via conflict aware detailed placement is addressed. Single row placement optimization is performed for each row to remove metal and inter-row via conflicts, while minimizing cell displacements. Since it is time consuming to consider many cell operations at once, we apply a few operations iteratively, where different operations are applied to each iteration and to each cell depending on whether the cell has a conflict in the previous iteration. Remaining conflicts are then removed by mapping conflict cells to white spaces. To this end, we minimize the number of cells to move and maximize the number of large white spaces before mapping. Experimental results demonstrate that the cell placement with two V0 masks is completed by proposed methods, with 7 times speedup and 21% reduction in total cell displacement, compared to conventional detailed placement.

Personalized trip planning is a challenging problem given that places of interest should be selected according to user preferences and sequentially arranged while satisfying various constraints. In this study, we aimed to model various uncertain aspects that should be considered during trip planning and efficiently generate personalized plans that maximize user satisfaction based on preferences and constraints. Specifically, we propose a probabilistic itinerary evaluation model based on a hybrid temporal Bayesian network that determines suitable itineraries considering preferences, constraints, and uncertain environmental variables. The model retrieves the sum of time-weighted user satisfaction, and ant colony optimization generates the trip plan that maximizes the objective function. First, the optimization algorithm generates candidate itineraries and evaluates them using the proposed model. Then, we improve candidate itineraries based on the evaluation results of previous itineraries. To validate the proposed trip planning approach, we conducted an extensive user study by asking participants to choose their preferred trip plans from options created by a human planner and our approach. The results show that our approach provides human-like trip plans, as participants selected our generated plans in 57% of the pairs. We also evaluated the efficiency of the employed ant colony optimization algorithm for trip planning by performance comparisons with other optimization methods.

In this study, we examined the mechanical durability and self-recovery characterization of liquid crystal gel films with lysine-based gelator. The results indicated that the structural destruction in liquid crystal gel films is attributed to dissociation among network structure. The cracked LC gel films can be recovered by formation of sol-sate films.

Depth (disparity) estimation from a light field (a set of dense multi-view images) is currently attracting much research interest. This paper focuses on how to handle a noisy light field for disparity estimation, because if left as it is, the noise deteriorates the accuracy of estimated disparity maps. Several researchers have worked on this problem, e.g., by introducing disparity cues that are robust to noise. However, it is not easy to break the trade-off between the accuracy and computational speed. To tackle this trade-off, we have integrated a fast denoising scheme in a fast disparity estimation framework that works in the epipolar plane image (EPI) domain. Specifically, we found that a simple 1-D slanted filter is very effective for reducing noise while preserving the underlying structure in an EPI. Moreover, this simple filtering does not require elaborate parameter configurations in accordance with the target noise level. Experimental results including real-world inputs show that our method can achieve good accuracy with much less computational time compared to some state-of-the-art methods.

Clinical researches show that the morbidity of coronary artery disease (CAD) is gradually increasing in many countries every year, and it causes hundreds of thousands of people all over the world dying for each year. As the optical coherence tomography with high resolution and better contrast applied to the lesion tissue investigation of human vessel, many more micro-structures of the vessel could be easily and clearly visible to doctors, which help to improve the CAD treatment effect. Manual qualitative analysis and classification of vessel lesion tissue are time-consuming to doctors because a single-time intravascular optical coherence (IVOCT) data set of a patient usually contains hundreds of in-vivo vessel images. To overcome this problem, we focus on the investigation of the superficial layer of the lesion region and propose a model based on local multi-layer region for vessel lesion components (lipid, fibrous and calcified plaque) features characterization and extraction. At the pre-processing stage, we applied two novel automatic methods to remove the catheter and guide-wire respectively. Based on the detected lumen boundary, the multi-layer model in the proximity lumen boundary region (PLBR) was built. In the multi-layer model, features extracted from the A-line sub-region (ALSR) of each layer was employed to characterize the type of the tissue existing in the ALSR. We used 7 human datasets containing total 490 OCT images to assess our tissue classification method. Validation was obtained by comparing the manual assessment with the automatic results derived by our method. The proposed automatic tissue classification method achieved an average accuracy of 89.53%, 93.81% and 91.78% for fibrous, calcified and lipid plaque respectively.

We consider the problem of placing arrows, which indicate the direction of each edge in directed graph drawings, without making them overlap other arrows, vertices and edges as much as possible. The following two methods have been proposed for this problem. One is an exact algorithm for the case in which the position of each arrow is restricted to some discrete points. The other is a heuristic algorithm for the case in which the arrow is allowed to move continuously on each edge. In this paper, we assume that the arrow positions are not restricted to discrete points and propose an exact algorithm for the problem of finding an arrow placement such that (a) the weighted sum of the numbers of overlaps with edges, vertices and other arrows is minimized and (b) the sum of the distances between the arrows and their edges' terminal vertices is minimized as a secondary objective. The proposed method solves this problem by reducing it to a mixed integer linear programming problem. Since this is an exponential time algorithm, we add a simple procedure as preprocessing to reduce the running time. Experimental results show that the proposed method can find a better arrow placement than the previous methods and the procedure for reducing the running time is effective.

Recently, Network Function Virtualization (NFV) has drawn attentions of many network researchers with great deal of flexibilities, and various network service chains can be used in an SDN/NFV environment. With the flexibility of virtual middlebox placement, how to place virtual middleboxes in order to optimize the performance of service chains becomes essential. Some past studies focused on placement problem of consolidated middleboxes which combine multiple functions into a virtual middlebox. However, when a virtual middlebox providing only a single function is considered, the placement problem becomes much more complex. In this paper, we propose a new heuristic method, the gradual switch clustering based virtual middlebox placement method, in order to improve the performance of service chains, with the constraints of end-to-end delay, bandwidth, and operation cost of deploying a virtual middlebox on a switch. The proposed method gradually finds candidate places for each type of virtual middlebox along with the sequential order of service chains, by clustering candidate switches which satisfy the constraints. Finally, among candidate places for each type of virtual middlebox, the best places are selected in order to minimize the end-to-end delays of service chains. The evaluation results, which are obtained through Mininet based extensive emulations, show that the proposed method outperforms than other methods, and specifically it achieves around 25% less end-to-end delay than other methods.

Recent research on graph drawing focuses on Right-Angle-Crossing (RAC) drawings of 1-plane graphs, where each edge is drawn as a straight line and two crossing edges only intersect at right angles. We give a transformation from a restricted case of the RAC drawing problem to a problem of finding a straight-line drawing of a maximal plane graph where some angles are required to be acute. For a restricted version of the latter problem, we show necessary and sufficient conditions for such a drawing to exist, and design an O(n2)-time algorithm that given an n-vertex plane graph produces a desired drawing of the graph or reports that none exists.

The consistent alignment of point clouds obtained from multiple scanning positions is a crucial step for many 3D modeling systems. This is especially true for environment modeling. In order to observe the full scene, a common approach is to rotate the scanning device around a rotation axis using a turntable. The final alignment of each frame data can be computed from the position and orientation of the rotation axis. However, in practice, the precise mounting of scanning devices is impossible. It is hard to locate the vertical support of the turntable and rotation axis on a common line, particularly for lower cost consumer hardware. Therefore the calibration of the rotation axis of the turntable is an important step for the 3D reconstruction. In this paper we propose a novel calibration method for the rotation axis of the turntable. With the proposed rotation axis calibration method, multiple 3D profiles of the target scene can be aligned precisely. In the experiments, three different evaluation approaches are used to evaluate the calibration accuracy of the rotation axis. The experimental results show that the proposed rotation axis calibration method can achieve a high accuracy.

The fifth generation mobile communication system (5G) is designed to have new radio capabilities to support not only conventional enhanced Mobile Broadband (eMBB) communications but also new machine type communications such as Ultra-Reliable Low-Latency communications (URLLC) and massive Machine Type communications (m-MTC). In such new areas of URLLC and m-MTC, mobile operators need to explore new use cases and/or applications together with vertical industries, the industries which are potential users of 5G, in order to fully exploit the new 5G capabilities. Intelligent Transport System (ITS), including automated driving, is one of the most promising application areas of 5G since it requires both ultra-reliable and low-latency communications. We are actively working on the research and development of truck platooning as a new 5G application. We have developed a field trial system for vehicular-to-network (V2N) communications using 5G prototype equipment and actual large-size trucks in order to assess 5G capabilities, including ultra-low-latency, in automotive test courses in the field. This paper discusses the fundamental performance evaluation required for vehicular communications between platooning trucks, such as low-latency message communication for vehicle control and low-latency video monitoring of following platooning truck vehicles. The paper also addresses the field evaluation results of 5G V2N communications in a rural area. It clarifies the fundamental radio propagation issues at the leading and the following vehicles in truck platooning for V2N communications, and discusses the impact of the radio propagation over a road to the over-the-air transmission performance of 5G V2N communications.

The explosive dynamics present in on-line social networks, typically represented by flaming phenomena, can have a serious impact on not only the sustainable operation of information networks but also on activities in the real world. In order to counter the flaming phenomenon, it is necessary to understand the mechanism underlying the generation of the flaming phenomena within an engineering framework. This paper discusses a new model of the generating mechanism of the flaming phenomena. Our previous study has shown that the cause of flaming phenomena can, by reference to an oscillation model on networks, be understood complex eigenvalues of the matrix formed to describe oscillating phenomena. In this paper, we show that the flaming phenomena can occur due to coupling between degenerated oscillation modes even if all the eigenvalues are real numbers. In addition, we investigate the generation process of flaming phenomena with respect to the initial phases of the degenerated oscillation modes.

This paper presents the mode matching (MM)/finite element method (FEM) hybrid analysis for a short-slot 2-plane coupler, and an optimization process for a wideband design based on a genetic algorithm (GA). The method of the analysis combines a fast modal analysis of the MM which reduces the computation time, with the flexibility of an FEM which can be used with an arbitrary cross-section. In the analysis, the model is reduced into the one-eighth model by using the three-dimensional structural symmetry. The computed results agree well with those by the simulation and the computation time is reduced. The bandwidth is improved by the optimization based on the GA from 2.4% to 6.9% for the 2-plane hybrid coupler and from 5.4% to 7.5% for the 2-plane cross coupler. The measured results confirm the wideband design.

This paper looks into the underlying RF energy harvesting issues at low input ambient power levels below 0 dBm where efficiency degradation is severe. The proposed design aims to improve the rectenna sensitivity, efficiency, and output DC power. In the same manner, we are using a straightforward and compact size rectenna design. The receiving antenna is a coplanar waveguide (CPW) slot monopole antenna with harmonic suppression property and a peak measured gain of 3 dBi. Also, an improved antenna radiation characteristics, e.g radiation pattern and gain covering the desired operating band (ISM 2.45 GHz), is observed. The rectifier is a voltage doubler circuit based on microstrip (MS) structure. Two architectures of rectenna were carefully designed, fabricated and tested. The first layout; antenna, and rectifier were fabricated separately and then connected using a connector. The peak efficiency (40% at -5 dBm) achieved is lower than expected. To improve the efficiency, a high compactness and simple integration between antenna and rectifier are achieved by using a smooth CPW-MS transition. This design shows improved conversion efficiency measurement results which typically agree with the simulation results. The measured peak conversion efficiency is 72% at RF power level of -7 dBm and a load resistance of 2 kΩ.

This paper presents a numerical study of the wireless channel characteristics of liver implants in a frequency range of 4.5-6.5GHz, considering different digital human phantoms by employing two inhomogeneous male and female models. Path loss data for in-body to on-body and in-body to off-body communication scenarios are provided. The influence of respiration-induced organ movement on signal attenuation is demonstrated. A narrower range of attenuation deviation is observed in the female model as compared to the male model. The path loss data in the female body is between 40-80dB which is around 5-10dB lower than the male model. Path loss data for the in-body to off-body scenario in both models suggest that in-body propagation is the main component of total path loss in the channel. The results demonstrate that channel characteristics are subject dependent, and thus indicate the need to take subject dependencies into consideration when investigating in-body communication channels.

Spectral graph theory, based on the adjacency matrix or the Laplacian matrix that represents the network topology and link weights, provides a useful approach for analyzing network structure. However, in large scale and complex social networks, since it is difficult to completely know the network topology and link weights, we cannot determine the components of these matrices directly. To solve this problem, we propose a method for indirectly determining the Laplacian matrix by estimating its eigenvalues and eigenvectors using the resonance of oscillation dynamics on networks.