This paper proposes a low-profile unidirectional supergain antenna applicable to wireless communication devices such as mobile terminals, the Internet of Things and so on. The antennas used for such systems are required to be not only electrically low-profile but also unsusceptible to surrounding objects such as human body and/or electrical equipment. The proposed antenna achieves both requirements due to its supergain property using planar elements and a closely placed planar reflector. The primary antenna is an asymmetric dipole type, and consists of a monopole element mounted on an edge of a rectangular conducting plane. Both elements are placed on a dielectric substrate backed by the planar reflector. It is numerically and experimentally shown that the supergain property is achieved by optimizing the geometrical parameters of the antenna. It is also shown that the impedance characteristics can be successfully adjusted by changing the lengths of the ground plane element and the monopole element. Thus, no additional impedance matching circuit is necessary. Furthermore, it is shown that surrounding objects have insignificant impact on the antenna performance.

The Machine-to-Machine (M2M) service network platform accommodates M2M communications traffic efficiently by using tree-structured networks and the computation resources deployed on network nodes. In the M2M service network platform, program files required for controlling devices are placed on network nodes, which have different amounts of computation resources according to their position in the hierarchy. The program files must be dynamically repositioned in response to service quality requests from each device, such as computation power, link bandwidth, and latency. This paper proposes a Program File Placement (PFP) method for the M2M service network platform. First, the PFP problem is formulated in the Mixed-Integer Linear Programming (MILP) approach. We prove that the decision version of the PFP problem is NP-complete. Next, we present heuristic algorithms that attain sub-optimal but attractive solutions. Evaluations show that the heuristic algorithm based on the number of devices that share a program file reduces the total number of placed program files compared to the algorithm that moves program files based on their position.

Software-defined networking (SDN) technology enables us to flexibly configure switches in a network. Previously, distributed SDN control methods have been discussed to improve their scalability and robustness. Distributed placement of controllers and backing up each other enhance robustness. However, these techniques do not include an emergency measure against large-scale failures such as network separation induced by disasters. In this study, we first propose a network partitioning method to create a robust control plane (C-Plane) against large-scale failures. In our approach, networks are partitioned into multiple sub-networks based on robust topology coefficient (RTC). RTC denotes the probability that nodes in a sub-network isolate from controllers when a large-scale failure occurs. By placing a local controller onto each sub-network, 6%-10% of larger controller-switch connections will be retained after failure as compared to other approaches. Furthermore, we discuss reactive emergency reconstruction of a distributed SDN C-plane. Each node detects a disconnection to its controller. Then, C-plane will be reconstructed by isolated switches and managed by the other substitute controller. Meanwhile, our approach reconstructs C-plane when network connectivity recovers. The main and substitute controllers detect network restoration and merge their C-planes without conflict. Simulation results reveal that our proposed method recovers C-plane logical connectivity with a probability of approximately 90% when failure occurs in 100 node networks. Furthermore, we demonstrate that the convergence time of our reconstruction mechanism is proportional to the network size.

As IT systems, including network systems using SDN/NFV technologies, become large-scaled and complicated, the cost of system management also increases rapidly. Network operators have to maintain their workflow in constructing and consistently updating such complex systems, and thus these management tasks in generating system update plan are desired to be automated. Declarative system update with state space search is a promising approach to enable this automation, however, the current methods is not enough scalable to practical systems. In this paper, we propose a novel heuristic approach to greatly reduce computation time to solve system update procedure for practical systems. Our heuristics accounts for structural bottleneck of the system update and advance search to resolve bottlenecks of current system states. This paper includes the following contributions: (1) formal definition of a novel heuristic function specialized to system update for A* search algorithm, (2) proofs that our heuristic function is consistent, i.e., A* algorithm with our heuristics returns a correct optimal solution and can omit repeatedly expansion of nodes in search spaces, and (3) results of performance evaluation of our heuristics. We evaluate the proposed algorithm in two cases; upgrading running hypervisor and rolling update of running VMs. The results show that computation time to solve system update plan for a system with 100 VMs does not exceed several minutes, whereas the conventional algorithm is only applicable for a very small system.

On surfaces of tris-(8-hydroxyquinolate) aluminum (Alq) and tris(7-propyl-8-hydroxyquinolinato) aluminum (Al7p) thin-films, positive and negative polarization charges appear, respectively, owing to spontaneous orientation of these polar molecules. Alq is a typical electron transport material where electrons are injected from cathode. Because the polarization charge exists at the Alq/cathode interface, it is likely that it affects the electron injection process because of Coulomb interaction. In order to evaluate an impact of polarization charge on electron injection from cathode, electron only devices (EODs) composed of Alq or Al7p were prepared and evaluated by displacement current measurement. We found that Alq-EOD has lower resistance than Al7p-EOD, indicating that the positive polarization charge at Alq/cathode interface enhances the electron injection due to Coulomb attraction, while the electron injection is suppressed by the negative polarization charge at the Al7p/Al interface. These results clearly suggest that it is necessary to design organic semiconductor devices by taking polarization charge into account.

Spectral graph theory gives an algebraic approach to the analysis of the dynamics of a network by using the matrix that represents the network structure. However, it is not easy for social networks to apply the spectral graph theory because the matrix elements cannot be given exactly to represent the structure of a social network. The matrix element should be set on the basis of the relationship between persons, but the relationship cannot be quantified accurately from obtainable data (e.g., call history and chat history). To get around this problem, we utilize the universality of random matrices with the feature of social networks. As such a random matrix, we use the normalized Laplacian matrix for a network where link weights are randomly given. In this paper, we first clarify that the universality (i.e., the Wigner semicircle law) of the normalized Laplacian matrix appears in the eigenvalue frequency distribution regardless of the link weight distribution. Then, we analyze the information propagation speed by using the spectral graph theory and the universality of the normalized Laplacian matrix. As a result, we show that the worst-case speed of the information propagation changes up to twice if the structure (i.e., relationship among people) of a social network changes.

Photophysical properties of water-soluble porphyrin were studied in aqueous solutions with/without DNA and in DNA solid films. Ultrathin films were prepared from aqueous DNA solutions by a spin-coating method on glass or on gold nanoparticles (AuNPs). Remarkable enhancement of phosphorescence was observed for porphyrin immobilized in DNA films spin-coated on AuNPs, which was attributed to the electric field enhancement and the increased radiative rate by localized surface plasmon resonance of AuNPs.

In this work, we report the in situ growth of gold nanoparticles (AuNPs) for the improvement of a transmission surface plasmon resonance (T-SPR) sensor to detect human immunoglobulin G (IgG). Human IgG was immobilized on an activated self-assembled monolayer of 11-mercaptoundecanoic on a gold-coated grating substrate. The T-SPR system was also used to monitor the construction of sensor chips as well as the binding of IgG and anti-IgG conjugated with AuNPs. After specific adsorption with IgG, the T-SPR signal was further enhanced by the in situ growth of AuNPs bound with anti-IgG. Using AuNP conjugation and in situ growth of bound AuNPs, the sensitivity of the IgG immunosensor was improved by two orders of magnitude compared with that without conjugated AuNPs.

Copper (Cu) electroless plating was conducted on planar and microstructured polydimethylsiloxane (PDMS) substrates. In this study, organic thin films terminated with nitrogen (N)-containing groups, e.g. poly (dimethylaminoethyl methacrylate) brush (PDMAEMA), aminopropyl trimethoxysilane monolayer (APTES), and polydopamine (PDA) were used to anchor palladium (Pd) catalyst. While electroless plating was successfully promoted on all sample surfaces, PDMAEMA was found to achieve the best adhesion strength to the PDMS surfaces, compared to APTES- and PDA-covered PDMS substrates, due to covalent bonding, anchoring effects of polymer chains as well as high affinity of N atoms to Pd species. Our process was also successfully applied to the electroless plating of microstructured PDMS substrates.

This paper presents a design for the perpendicular-corporate feed in a four-layer circularly-polarized parallel-plate slot array antenna. We place a dielectric layer with adequate permittivity in the region between the coupling-aperture and the radiating-slot layers to remove x-shaped cavity walls completely in the radiating part of a conventional planar corporate-feed waveguide slot array antenna. To address fabrication constraints, the dielectric layer consists of PTFE and air. It excites a strong standing wave in the region and so provides 2×2-element subarrays with uniform excitation. None of the slot layers are in electrical contact due to air gaps between the slot layers. The four-layer structure with apertures for circular polarization contributes to wideband design for axial ratios because of the eigenmodes in the desired band. We realize an 11.9% bandwidth for axial ratios of less than 3.0dB as confirmed by measurements in the 60GHz band. At the design frequency, the measured realized gain is 32.7dBi with an antenna efficiency of 75.5%.

Sparse representation has been successfully applied to visual tracking. Recent progresses in sparse tracking are mainly made within the particle filter framework. However, most sparse trackers need to extract complex feature representations for each particle in the limited sample space, leading to expensive computation cost and yielding inferior tracking performance. To deal with the above issues, we propose a novel sparse tracking method based on the circulant reverse lasso model. Benefiting from the properties of circulant matrices, densely sampled target candidates are implicitly generated by cyclically shifting the base feature descriptors, and then embedded into a reverse sparse reconstruction model as a dictionary to encode a robust appearance template. The alternating direction method of multipliers is employed for solving the reverse sparse model and the optimization process can be efficiently solved in the frequency domain, which enables the proposed tracker to run in real-time. The calculated sparse coefficient map represents the similarity scores between the template and circular shifted samples. Thus the target location can be directly predicted according to the coordinates of the peak coefficient. A scale-aware template updating strategy is combined with the correlation filter template learning to take into account both appearance deformations and scale variations. Both quantitative and qualitative evaluations on two challenging tracking benchmarks demonstrate that the proposed algorithm performs favorably against several state-of-the-art sparse representation based tracking methods.

Kirchhoff approximation (KA) method has been applied for ray-mode conversion to analyze the plane wave scattering by conducting thick slits. The scattering fields can be considered as field radiations from equivalent magnetic current sources assumed by closing the aperture of the slit. The obtained results are compared with those of other methods to validate the accuracy of the proposed formulation in different conditions of slit dimension.

This paper presents an approach for developing an algorithm for automatic license plate recognition system (ALPR) on complex scenes. A plate-style classification method is also proposed in this paper to address the inherent challenges for ALPR in a system that uses multiple plate-styles (e.g., different fonts, multiple plate lay-out, variations in character sequences) which is the case in the current Philippine license plate system. Methods are proposed for each ALPR module: plate detection, character segmentation, and character recognition. K-nearest neighbor (KNN) is used as a classifier for character recognition together with a proposed confidence scoring to rate the decision made by the classifier. A small dataset of Philippine license plates but with relevant features of complex scenarios for ALPR is prepared. Using the proposed system on the prepared dataset, the performance of the system is evaluated on different categories of complex scenes. The proposed algorithm structure shows promising results and yielded an overall accuracy higher than the existing ALPR systems on the dataset consisting mostly of complex scenes.

Recent researches on mobile robots show that convolutional neural network (CNN) has achieved impressive performance in visual place recognition especially for large-scale dynamic environment. However, CNN leads to the large space of image representation that cannot meet the real-time demand for robot navigation. Aiming at this problem, we evaluate the feature effectiveness of feature maps obtained from the layer of CNN by variance and propose a novel method that reserve salient feature maps and make adaptive binarization for them. Experimental results demonstrate the effectiveness and efficiency of our method. Compared with state of the art methods for visual place recognition, our method not only has no significant loss in precision, but also greatly reduces the space of image representation.

Lasso regression based on the L1 regularization is one of the most popular sparse estimation methods. It is often required to set appropriately in advance the regularization parameter that determines the degree of regularization. Although the empirical Bayes approach provides an effective method to estimate the regularization parameter, its solution has yet to be fully investigated in the lasso regression model. In this study, we analyze the empirical Bayes estimator of the one-parameter model of lasso regression and show its uniqueness and its properties. Furthermore, we compare this estimator with that of the variational approximation, and its accuracy is evaluated.

Touch screen has become the mainstream manipulation technique on handheld devices. However, its innate limitations, e.g. the occlusion problem and fat finger problem, lower user experience in many use scenarios on handheld displays. Back-of-device interaction, which makes use of input units on the rear of a device for interaction, is one of the most promising approaches to address the above problems. In this paper, we present the findings of a user study in which we explored users' pointing performances in using two types of touch input on handheld devices. The results indicate that front-of-device touch input is averagely about two times as fast as back-of-device touch input but with higher error rates especially in acquiring the narrower targets. Based on the results of our study, we argue that in the premise of keeping the functionalities and layouts of current mainstream user interfaces back-of-device touch input should be treated as a supplement to front-of-device touch input rather than a replacement.

In this paper, we developed saccade-induced line displays including flashing period controllers. The displays speeded up the flashing period of one line using LED drivers and Arduino Uno equipped with AVR microcomputers. It was shown that saccades were easily induced when the observer alternately looks at the two fast flashing line displays apart. Also, we were able to find the optimum flashing period using a controller that can speed up the flashing period and change its speed. We found that the relationship between the viewing angle of the observer and the optimum flashing period is almost proportional.

In this paper, a proof-of-concept sensor platform for an all-in-one wireless bio sensor chip was developed and evaluated. An on-chip battery, an on-chip electrochromic display (ECD), a micro processor, a voltage converter and analog switches were implemented on a printed circuit board. Instead of bio-sensor, a temperature sensor was used to evaluate the functionality of the platform. The platform successfully worked in an electrolyte and the encoded measurement result was displayed on the ECD. The displayed data was captured by a CMOS digital camera and the measured data could be successfully decoded by a computer program.

In this paper, we examined the transfer method of fluororesin as the novel formation method of polymer wall in order to realize the lattice-shaped polymer walls without patterned light irradiation using photomask. We clarified that the transfer method was effective for formation of polymer wall structure on flexible substrate.

We have proposed a mortar-shaped structure to improve response time and alignment uniformity of twisted vertically aligned (TVA) mode liquid crystal displays (LCDs) for high-contrast reflective color LCDs. From the results of the simulation, we clarified that response time, alignment uniformity and viewing angle range of TVA-mode LCDs were improved by controlling the liquid crystal alignment axis-symmetrically in each pixel.