At the present time, as downsizing of connectors causes thin gold plated layer and low contact load, serious problem of degradation of contact resistance property is induced. For these contacts, corrosion of the contacts surface under environment and high temperature as soldering and reflow process should be existed. Oxidation of base metal atoms which are diffused from under layer and additives occurs. Contact resistance increases for both surface contamination and low contact load. In order to resolve these problems and wear of surface, application of contact lubricants is useful and effective. However, degradation of the lubricants under such reflow process as high temperature possibly occurs. Therefore, in this study, from view point of change of lubricant quality as viscosity, weight loss, polymerization, oxidation and molecular orientation were clarified. For increase in contact resistance, orientation of lubricant molecular acts as important factor was found. The other factors of the lubricant hardly does not effect on contact resistance.

Several applications for 3-D visualization require dense detection of correspondence for displacement estimation among heterogeneous multi-view images. Due to differences in resolution or sampling density and field of view in the images, estimation of dense displacement is not straight forward. Therefore, we propose a scale invariant polynomial expansion method that can estimate dense displacement between two heterogeneous views. Evaluation on heterogeneous images verifies accuracy of our approach.

This paper deals with a problem to decide whether a given graph structure appears as a pattern in the structure of a given graph. A graph pattern is a triple p=(V,E,H), where (V,E) is a graph and H is a set of variables, which are ordered lists of vertices in V. A variable can be replaced with an arbitrary connected graph by a kind of hyperedge replacements. A substitution is a collection of such replacements. The graph pattern matching problem (GPMP) is the computational problem to decide whether or not a given graph G is obtained from a given graph pattern p by a substitution. In this paper, we show that GPMP for a graph pattern p and a graph G is solvable in polynomial time if the length of every variable in p is 2, p is of bounded treewidth, and G is connected.

A layered light-field display based on light-field factorization is considered. In the original work, the factorization is formulated under the assumption that the light field is captured with orthographic cameras. In this paper, we introduce a generalized framework for light-field factorization that can handle both the orthographic and perspective camera projection models. With our framework, a light field captured with perspective cameras can be displayed accurately.

In this paper, we propose a floorplan aware high-level synthesis algorithm with body biasing for delay variation compensation, which minimizes the average leakage energy of manufactured chips. In order to realize floorplan-aware high-level synthesis, we utilize huddle-based distributed register architecture (HDR architecture). HDR architecture divides the chip area into small partitions called a huddle and we can control a body bias voltage for every huddle. During high-level synthesis, we iteratively obtain expected leakage energy for every huddle when applying a body bias voltage. A huddle with smaller expected leakage energy contributes to reducing expected leakage energy of the entire circuit more but can increase the latency. We assign control-data flow graph (CDFG) nodes in non-critical paths to the huddles with larger expected leakage energy and those in critical paths to the huddles with smaller expected leakage energy. We expect to minimize the entire leakage energy in a manufactured chip without increasing its latency. Experimental results show that our algorithm reduces the average leakage energy by up to 39.7% without latency and yield degradation compared with typical-case design with body biasing.

As autonomous underwater vehicles (AUVs) have been widely used to perform cooperative works with sensor nodes for data-gathering, the need for long-range AUVs has further grown to support the long-duration cooperation with sensor nodes. However, as existing data-gathering protocols for the cooperative works have not considered AUVs' energy consumption, AUVs can deplete their energy more quickly before fulfilling their missions. The objective of this work is to develop an AUV based data-gathering protocol that maximizes the duration for the cooperative works. Simulation results show that the proposed protocol outperforms existing protocols with respect to the long-range AUVs.

This paper discusses the use of a common computer mouse as a pointing interface for tabletop displays. In the use of a common computer mouse for tabletop displays, there might be an angular distance between the screen coordinates and the mouse control coordinates. To align those coordinates, this paper introduces a screen coordinates calibration technique using a shadow cursor. A shadow cursor is the basic idea of manipulating a mouse cursor without any visual feedbacks. The shadow cursor plays an important role in obtaining the angular distance between the two coordinates. It enables the user to perform a simple mouse manipulation so that screen coordinates calibration will be completed in less than a second.

Spritz is a stream cipher proposed by Rivest and Schuldt at the rump session of CRYPTO 2014. It is intended to be a replacement of the popular RC4 stream cipher. In this paper we propose distinguishing attacks on the full Spritz, based on a short-term bias in the first two bytes of a keystream and a long-term bias in the first two bytes of every cycle of N keystream bytes, where N is the size of the internal permutation. Our attacks are able to distinguish a keystream of the full Spritz from a random sequence with samples of first two bytes produced by 244.8 multiple key-IV pairs or 260.8 keystream bytes produced by a single key-IV pair. These biases are also useful in the event of plaintext recovery in a broadcast attack. In the second part of the paper, we look at a state recovery attack on Spritz, in a special situation when the cipher enters a class of weak states. We determine the probability of encountering such a state, and demonstrate a state recovery algorithm that betters the 21400 step algorithm of Ankele et al. at Latincrypt 2015. Finally we propose a simple fix that removes the bias in the first two keystream bytes. The countermeasure requires only one additional memory access and hence does not diminish software performance substantially, and in fact the loss in software speed is only around 1.5%.

In this paper, an algorithm is proposed for license plate recognition (LPR) in video traffic surveillance applications. In an LPR system, the primary steps are license plate detection and character segmentation. However, in practice, false alarms often occur due to images of vehicle parts that are similar in appearance to a license plate or detection rate degradation due to local illumination changes. To alleviate these difficulties, the proposed license plate segmentation employs an adaptive binarization using a superpixel-based local contrast measurement. From the binarization, we apply a set of rules to a sequence of characters in a sub-image region to determine whether it is part of a license plate. This process is effective in reducing false alarms and improving detection rates. Our experimental results demonstrate a significant improvement over conventional methods.

This study focuses on the design of electrical stimulator for retinal prosthesis. The stimulator must be designed such that the occurrence of electrolysis or any irreversible process in the electrodes and flexible lead is prevented in order to achieve safe stimulation over long periods using the large number of electrodes. Some types of biphasic current pulse circuits, charge balance circuits, and AC power delivery circuits were developed to address this issue. Electronic circuitry must be introduced in the stimulator to achieve the large number of electrodes required to obtain high quality of vision. The concept of a smart electrode, in which a microchip is embedded inside an electrode, is presented for future retinal prostheses with over 1000 electrodes.

Effective indoor localization is the essential part of VR (Virtual Reality) and AR (Augmented Reality) technologies. Tracking the RGB-D camera becomes more popular since it can capture the relatively accurate color and depth information at the same time. With the recovered colorful point cloud, the traditional ICP (Iterative Closest Point) algorithm can be used to estimate the camera poses and reconstruct the scene. However, many works focus on improving ICP for processing the general scene and ignore the practical significance of effective initialization under the specific conditions, such as the indoor scene for VR or AR. In this work, a novel indoor prior based initialization method has been proposed to estimate the initial motion for ICP algorithm. We introduce the generation process of colorful point cloud at first, and then introduce the camera rotation initialization method for ICP in detail. A fast region growing based method is used to detect planes in an indoor frame. After we merge those small planes and pick up the two biggest unparallel ones in each frame, a novel rotation estimation method can be employed for the adjacent frames. We evaluate the effectiveness of our method by means of qualitative observation of reconstruction result because of the lack of the ground truth. Experimental results show that our method can not only fix the failure cases, but also can reduce the ICP iteration steps significantly.

In general, semi-supervised clustering can outperform unsupervised clustering. Since 2001, pairwise constraints for semi-supervised clustering have been an important paradigm in this field. In this paper, we show that pairwise constraints (ECs) can affect the performance of clustering in certain situations and analyze the reasons for this in detail. To overcome these disadvantages, we first outline some exemplars constraints. Based on these constraints, we then describe a semi-supervised clustering framework, and design an exemplars constraints expectation-maximization algorithm. Finally, standard datasets are selected for experiments, and experimental results are presented, which show that the exemplars constraints outperform the corresponding unsupervised clustering and semi-supervised algorithms based on pairwise constraints.

CMOS amperometric sensors with a microelectrode array offer great potential for counting bacteria because of their low cost, compact size, and ease of use. This paper presents a current-integration-based CMOS amperometric sensor for high-sensitivity bacteria counting. It has a current integrator for noise reduction and reportedly the most large-scale microelectrode array (1024 × 1024). This proposed sensor can count the number of bacteria ranging from a single cell to approximately a million cells. A prototype chip was fabricated using two-poly three-metal (2P3M) 0.6-µm standard CMOS technology. A 7.6 × 7.1-mm2 chip operates from a 5V supply at 1.9mA. In addition, by using the prototype chip, we performed electrochemical measurement and partial 2D imaging of silicone through constant potential amperometry. The measurement results indicate that the proposed sensor chip was able to accurately readout redox current from the 1024 × 1024 sensor array.

In this paper, we present sub-1-V CMOS-based electrophoresis method for small-form-factor biomolecule manipulation that is contained in a microchip. This is the first time this type of device has been presented in the literature. By combining CMOS technology with electroless gold plating, the electrode pitch can be reduced and the required input voltage can be decreased to less than 1 V. We fabricated the CMOS electrophoresis chip in a cost-competitive 0.6 µm standard CMOS process. A sample/hold circuit in each cell is used to generate a constant output from an analog input. After forming gold electrodes using an electroless gold plating technique, we were able to manipulate red food coloring with a 0-0.7 V input voltage range. The results shows that the proposed CMOS chip is effective for electrophoresis-based manipulation.

Narrow swipe sensor has been widely used in embedded systems such as smart-phone. However, the size of captured image is much smaller than that obtained by the traditional area sensor. Therefore, the limited template coverage is the performance bottleneck of such kind of systems. Aiming to increase the geometry coverage of templates, a novel fingerprint template feature synthesis scheme is proposed in the present study. This method could synthesis multiple input fingerprints into a wider template by clustering the minutiae descriptors. The proposed method consists of two modules. Firstly, a user behavior-based Registration Pattern Inspection (RPI) algorithm is proposed to select the qualified candidates. Secondly, an iterative clustering algorithm Modified Fuzzy C-Means (MFCM) is proposed to process the large amount of minutiae descriptors and then generate the final template. Experiments conducted over swipe fingerprint database validate that this innovative method gives rise to significant improvements in reducing FRR (False Reject Rate) and EER (Equal Error Rate).

Peer-to-peer (P2P) overlay networks are widely employed in distributed systems. The number of hops required by a node to locate an object is the fundamental search cost of a P2P network. Creating replicas can efficiently reduce the cost of object search, so how to deploy replicas to reduce the cost as much as possible is a critical problem of P2P networks. In the literature, most existing replica placement strategies arrange replicas at nodes near the one containing the considered object. In this paper, we formally demonstrate that for a complete Chord P2P network and many non-complete Chord ones, due to their deterministic structures, we can allocate replicas to nodes closest to the target in the identifier space to maximize the reduction in the total number of hops required by all nodes to reach a copy of the object during the search heading to the target node.

Given a graph G=(V, E), where V and E are vertex and edge sets of G, and a subset VNT of vertices called a non-terminal set, the minimum spanning tree with a non-terminal set VNT, denoted by MSTNT, is a connected and acyclic spanning subgraph of G that contains all vertices of V with the minimum weight where each vertex in a non-terminal set is not a leaf. On general graphs, the problem of finding an MSTNT of G is NP-hard. We show that if G is an outerplanar graph then finding an MSTNT of G is linearly solvable with respect to the number of vertices.

We propose a cache-aware method to accelerate texture-based volume rendering on a graphics processing unit (GPU) that is compatible with the compute unified device architecture. The proposed method extends a previous method such that it can maximize the average rendering performance while rotating the viewing direction around a volume. To realize this, the proposed method performs in-place rotation of volume data, which rearranges the order of voxels to allow consecutive threads (warps) to refer to voxels with the minimum access strides. Experiments indicate that the proposed method replaces the worst texture cache (TC) hit rate of 42% with the best TC hit rate of 93% for a 10243-voxel volume. Thus, the average frame rate increases by a factor of 1.6 in the proposed method compared with that in the previous method. Although the overhead of in-place rotation slightly decreases the frame rate from 2.0 frames per second (fps) to 1.9 fps, this slowdown occurs only with a few viewing directions.

RC4 is a well-known stream cipher designed by Rivest. Due to considerable cryptanalysis efforts over past 20 years, several kinds of statistic biases in a key stream of RC4 have been observed so far. Finally, practical full plaintext recovery attacks on RC4 in SSL/TLS were independently proposed by AlFardan et al. and Isobe et al. in 2013. Responded to these attacks, usage of RC4 has drastically decreased in SSL/TLS. However, according to the research by Trustworthy Internet Movement, RC4 is still used by some websites for the encryption on SSL/TLS. In this paper, we shows a new plaintext recovery attack for RC4 under the assumption of HTTPS. We develop a method for exploiting single-byte and double-byte biases together to efficiently guess the target bytes, while previous attacks use either single-byte biases or double-byte biases. As a result, target plaintext bytes can be extracted with higher probability than previous best attacks given 229 ciphertexts encrypted by randomly-chosen keys. In the most efficient case, the success probability of our attack are more than twice compared to previous best attacks.

The major task in compact modeling for high power devices is to predict the switching waveform accurately because it determines the energy loss of circuits. Device capacitance mainly determines the switching characteristics, which makes accurate capacitance modeling inevitable. This paper presents a newly developed compact model HiSIM-GaN [Hiroshima University STARC IGFET Model for Gallium-Nitride-based High Electron Mobility Transistors (GaN-HEMTs)], where the focus is given on the accurate modeling of the field-plate (FP), which is introduced to delocalize the electric-field peak that occurs at the electrode edge. We demonstrate that the proposed model reproduces capacitance measurements of a GaN-HEMT accurately without fitting parameters. Furthermore, the influence of the field plate on the studied circuit performance is analyzed.