To make medical telemetry system more reliable in severe electromagnetic environment, we applied spread spectrum communication to ECG data transmission method. Spread spectrum communication system has shown superior performances to other systems, especially, in respect of anti-jamming, which allows it to share the frequency band with current telemetry systems. In this study, we show the characteristics of a spread spectrum transmitter when it is used in the same frequency band as a narrow-band transmitter. The result shows that the spread spectrum telemetry system can use the same frequency band permitted for medical telemetry system.

A multi-layer perceptron (MLP) acting directly in the time-domain is applied as a speech signal enhancer, and the performance examined in the context of three common classes of degradation, namely low bit-rate CELP degradation is non-linear system degradation, additive noise, and convolution by a linear system. The investigation focuses on two topics: (i) the influence of non-linearities within the network and (ii) network topology, comparing single and multiple output structures. The objective is to examine how these characteristics influence network performance and whether this depends on the class of degradation. Experimental results show the importance of matching the enhancer to the class of degradation. In the case of the CELP coder the standard MLP with its inherently non-linear characteristics is shown to be consistently better than any equivalent linear structure (up to 3.2 dB compared with 1.6 dB SNR improvement). In contrast, when the degradation is from additive noise, a linear enhancer is always, superior.

MRI is a widely used diagnostic imaging modality because it has excellent diagnostic capabilities, is safe to use and generates images not affected by bone artifacts. Images are obtained by utilizing the phenomenon of Nuclear Magnetic Resonance (NMR) by which protons located in a static magnetic field absorb radiofrequency (RF) pulses with a specific frequency and release a part of the energy as a NMR signal. Potentially MRI has the ability to provide functional and metabolic information (such as flow, temperature, diffusion, neuron activity) in addition to morphological information. This paper describes the imaging principles and provides a general outline of some applications: flow imaging, metabolite imaging and temperature imaging.

A noise cancelling sonar-ranging system based on the adaptive filtering technique, which can automatically adapt itself to the changes in environmental noise-field and improve the passive sonar-ranging/goniometric precision, was introduced by this paper. In the meantime, the software and hardware design principle of the system using high speed VLSI (Very Large Scale Integrated) DSP (Digital Signal Processing) chips, and the practical test results were also presented. In comparison with the traditional ranging system, the system not only enhanced obviously the ranging precision but also possessed some more characteristics such as simple structure, rapid operation, large data-storage volume, easy programming, high reliability and so on.

Most traditional directory systems use tree structure. This structure has revealed some problems, especially in a large system domain like distributed networking environment. These problems are severe constraints on object naming, no support to automatic sharing, and single name space. We proposed a new directory structure called MSD (Multi-Space Directory) to solve these problems. MSD exhibits several outstanding characteristics over tree directory, such as supporting both hierarchical and orthogonal classifications, supporting both vertical and horizontal automatic sharings, providing multiple working environment, and providing a better mechanism for protection and consistency. This paper first analyzed the problems of tree directory and new requirements for directory systems, then describes the structure of MSD in detail and shows its merits over tree directory.

A method for painting a sequence of monochromatic images is proposed. In this method, a color model, whose base components are hue, saturation and intensity, is used to keep the lightness of images unchanged before and after painting. Two successive frames in the monochromatic image sequence and a colored image of the first frame which is interactively painted, are analyzed in order to paint the next monochromatic frame. The painting process is composed of two phases, that is, an automatic coloring phase and an interactive retouching phase. In the automatic coloring phase, hierarchical image segmentation and region matching procedures are performed, and the two attributes of hue and saturation are mapped from the painted image of the first frame to the next image. In the retouching phase, using an interactive paint system based on the color model, users can modify the chromatic components of pixels whose colors were not mapped correctly. Several experiments show that our method is very effective in reducing tedious painting.

Many combinatorial problems can be efficiently solved for partial k-trees (graphs of treewidth bounded by k). The edge-coloring problem is one of the well-known combinatorial problems for which no NC algorithms have been obtained for partial k-trees. This paper gives an optimal and first NC parallel algorithm to find an edge-coloring of any given partial k-tree with bounded degrees using a minimum number of colors. In the paper k is assumed to be bounded.

We propose a new concept of network dimensioning, which is based not only on the grade of service but also on profit. In traditional network dimensioning methodology, the number of circuits on links is designed under a cost-minimization concept with grade of service constraints. Recently, telecommunication markets have become very large and competitive; therefore, we believe that a profit viewpoint is now essential. However, it is difficult to calculate profit in almost all the dimensioning methods currently used, because they mainly employ peak-hour traffic data, while profit depends on all the hourly traffic data which contain both peak and off-peak data. In this paper, we propose using all the hourly traffic data in network dimensioning. From these data and telephone charges for each hour, revenues will be estimated. On the other hand, facility costs will be estimated from the number of circuits. Finally, we can estimate profit from the difference between revenues and facility costs. Focusing on both quality and profits in network dimensioning leads to more advanced quality management and quality control in telecommunications networks than with traditional methodology. This paper outlines a dimensioning method based on profit, and describes its properties, some applications of it, and summarizes further studies.

This paper deals with an efficient radix-2 divider design theory that uses carry-propagation-free adders based on redundant binary{1, 0, 1} representation. In order to compute the division fast, we look ahead to the next step quotient-digit selection embedded in the current partial remainder calculation. The solution is a function of the four most significant digits of the current partial remainder, when scaling the divisor in the range [1, 9/8). In gate depth, this result is better than the higher radix-4 case without the look-ahead quotient-digit selection and the design is simple.

We propose a method for configuring LSI manufacturing lines so that they can not only be used to manufacture low-cost LSIs in bulk quantities but also can be used to manufacture small lots with ultra-short TAT. This is achieved by adding a relatively small amount of single-wafer processing equipment to a existing conventional processing line, and therefore involves minimum investment.

We discuss properties of acyclic graph evolution driven by node-firing. The research background and basic concepts of acyclic graph evolution are from the mutual exclusion problem in distributed environments. We proposed in our previous work a mutual exclusion protocol which is based on the notion of evolution trajectories of acyclic graphs. In this paper, we analyze firing concurrency and periodicity of the acyclic graph evolution, from graph theoretical point of views, and investigate topological conditions for assuring the number of firable nodes below a some fixed constant, at any instance of the evolution trajectory. A marked graph, a subclass of Petri nets, is often utilized as a proof tool in analysis.

A flexible and low-cost menagement technology is desired for fabrication line of both ASICs and cutting edge LSIs. To meet such desire, a management technology named "super operator shifts" has been proposed. After taking operator's skill level into consideration, an ASIC line manager can stretch line working time by use of the super operator shifts. It results that he can successfully get 3-shifts turn around time for severe-delivery-date lots with a payment equal to about 2-shifts line-cost.

This paper presents a method for spatial and temporal segmentation of long image sequences which include multiple independently moving objects, based on the Minimum Description Length (MDL) principle. By obtaining an optimal motion description, we extract spatiotemporal (ST) segments in the image sequence, each of which consists of edge segments with similar motions. First, we construct a family of 2D motion models, each of which is completely determined by its specified set of equations. Then, based on these sets of equations we formulate the motion description length in a long sequence. The motion state of one object at one moment is determined by finding the model with shortest description length. Temporal segmentation is carried out when the motion state is found to have changed. At the same time, the spatial segmentation is globally optimized in such a way that the motion description of the entire scene reaches a minimum.

B-ISDN telecommunication systems will require signal processing speeds up to 600 Mbps or more. We must therefore consider the affects of signal reflection, signal attenuation, time dalay, and so on when designing these systems. The higher the signal speed, the larger the electrical noise induced around the connector, especially in the plated through holes (PTHs) area. This paper presents the results of our investigation focused on connector mounting configurations in the signal transmission line, especially whether or not signals transmit through the PTH in a printed circuit board (PCB). How the signal reflection characteristics depend upon transmission line configurations are discussed and experimental results and simulation analyses for a transmission line system using a small miniature A-type (SMA) connector as an example are performed. It is suggested that designs for future high-speed signal transmission circuits take into account the PTH diameter and/or the PTH pitch conditions, values for which can be determined from simulation analysis.

Carrier mobility is one of the most fundamental parameters in semiconductor device modeling, and many mobility models have already been reported. Especially for numerical device simulators, many local models which are functions of impurity concentration and electric field at each local point have been studied. However, concerning their dependence on impurity concentration including carrier screening effects, these models suffer parameter fitting procedure because of their empirical formulation. In such models, carrier screening effects to the Coulomb potential of ionized impurity are not sufficiently considered, although we can find some models which treat the effects as only a small perturbation term. According to the simple theory of Brooks and Herring, carrier screening effects should be included in strong combination with impurity concentration terms and cannot be treated as additional perturbations. Although Brooks-Herring theory is successful, it also suffers from overestimation of the mobility values at concentration higher than 1018 cm-3 which causes some other complicated phenomena. Therefore there have been no models which directly use Brooks-Herring formula. But it is true that such screening effects should be considered when carrier concentration differs from impurity concentration as in the inversion layers of MOSFETs. We have developed a new mobility model for its dependence of impurity and carrier concentration based on the theory of Brooks-Herring. Brooks-Herring theory is based on simple physics of screened Coulomb potential, and therefore makes the model to include effects of free carriers without an artifitial formula. For high doping regime, an additional term has been introduced in Brooks-Herring formula to correct the high doping effects. Except for this term, the model should be most appropriate for including the carrier screening effects upto the concentration of 1018 cm-3. The new model is implimented in a device simulator, and is applied to the evaluation of MOSFETs especially for the universal curves of inversion layer mobility. Moreoever, the applications to the depletion-type MOSFET confirm the validity of the screening effects. The purpose of this paper is to propose the new mobility model and to show its validity through these applications to MOSFETs.

Concerned is a spectral profile of electromagnetic (EM) emission from a signal line on a high-speed digital circuit. The authors have proposed and examined an a priori method to predict the peak frequencies on spectral profile of EM emission from printed circuit boards (PCBs). Profile of an EM spectrum is determined by the resonance of digital circuits. It is the purpose of this paper to investigate the parameters that determine the spectral profile of EM emission from a signal line on a PCS. In this paper, measurements and calculations of EM spectra were carried out for different load capacitances. EM emissions were measured with a small loop antenna at a 50mm from the surface of the PCB. Measured EM spectra had two peaks. Calculated EM spectra, which was based on transient current given by the analog simulator SPICE, had two peaks too. Results of calculations of EM spectra for different internal capacitances of an IC tell that lower peak frequency is determined by the resonance frequency of the resonant loop which is composed of an IC package and a decoupling capacitor. Comparison with measured EM spectra and calculated EM spectra for different load resistances tell that sharpness of the other peak depends on Q factor of a resonant loop which includes a signal line. Therefore the peak frequencies of EM emission spectrum can be predicted as two resonance frequencies of two resonant circuits.

In this paper, a new off-line handwritten word recognition method based on the explicit modeling of character junctures is presented. A handwritten word is regarded as a sequence of characters and junctures of four types. Hence both characters and junctures are explicitly modeled. A handwriting system employing hidden Markov models as the main statistical framework has been developed based on this scheme. An interconnection network of character and ligature models is constructed to model words of indefinite length. This model can ideally describe any form of hamdwritten words including discretely spaced words, pure cursive words, and unconstrained words of mixed styles. Also presented are efficient encoding and decoding schemes suitable for this model. The system has shown encouraging performance with a standard USPS database.

This letter proposes a time varying step size normalized LMS (TVS-NLMS) algorithm for adaptive echo canceler structures. Proposed algorithm reduces distortion during double talk, without increasing the computational cost nor decreasing the convergence rate of the normalized LMS algorithm significantly. Simulation results using white noise and actual speech signals confirm the desirable features of the proposed scheme.

A 3-dimensional specific thickness profile was fabricated on a thin glass diaphragm lens to reduce aberration at short focal distances for greater dynamic focusing. The deformation of the diaphragm was calculated by stress analysis utilizing the Finite Element Method (FEM). Geometric non linearity is considered in the FEM analysis. The glass diaphragm is 10 mm in diameter and the average thickness is 11 µm. To obtain both a curved shape and an optical surface on the glass diaphragm, the 3-dimensional precision grinding technique was utilized. The processed shape matches the designed one with less than 0.3 µm deviation, and the average surface roughness is 0.005 µm. Optical characteristics of the dynamic focusing lens having a specific thickness profile, were measured by Modulation Transfer Function (MTF) measurement equipment. At a focal distance of 250 mm, the specific thickness diaphragm lens resolution is 10 cycles/mm, whereas, the uniform thickness diaphragm is 4 cycles/mm. Even at other focal distances, the specific thickness diaphragm shows superior optical characteristics in comparison with those of the uniform thickness diaphragm. The 3-dimensional profile diaphragm resolution is 2.5 times finer at a focal distance of 250 mm, thus, being capable of displacement control for variable optic devices. This was achieved by employing semiconductor processing methods in conjunction with precision grinding techniques which are necessary for fabricating micro structures.

Soliton transmission control has already proved to be an outstanding technique and enable a soliton to be transmit over one million kilometers. This technique is not only applicable to vast distances but also to shorter distances where the amplifier spacing is greater than that of conventional systems. A combination of time and frequency domain control eliminates the noise accumulation and timing jitter caused by soliton interaction and the Gordon-Haus effect, that are the main impediments to extending the transmission distance. In this paper we describe soliton control techniques applied over an astronomical transmission distance of 180,000,000 km, and to a terrestrial system with a large amplifier spacing of up to 100km. We also report the possibility of realizing a sub-tera bit/s soliton transmission system operating over more than 5,000 km in which the soliton self-frequency shift is controlled with the soliton control technique.