Felipe A. CRUZ-PEREZ Lauro ORTIGOZA-GUERRERO
Flexible Resource Allocation (FRA) strategies selectively control the transmission rates of users allowing them to specify maximum and minimum bandwidth requirements for the service type requested ensuring a minimum quality of service (QoS) is met. Complete, Partial, and Non Resource Sharing are the three types of resource sharing policies that can be used in systems with integrated services (voice, video and data) with different QoS and elasticities requirements. In this paper, an FRA strategy with Partial Resource Sharing, called Primary Unavailable Secondary Minimum (PUSMin), is presented. An analytical method is developed to assess its performance in an environment where several service types (with different bandwidth and elasticities requirements) exist. Results show that PUSMin decreases the resource reassignment rate as the offered traffic increases. This decreases the signalling overhead and computational complexity in the Base Station Controller (BSC) or Base Transceiver Station (BTS).
Tamrat BAYLE Reiji AIBARA Kouji NISHIMURA
One of the key issues in the next generation Internet is end-to-end Quality of Service (QoS) provisioning for real-time applications. The Differentiated Services (DiffServ) architecture offers a scalable alternative to provide QoS in the Internet. However, within this architecture, an efficient scheduling mechanism is still needed to ensure such QoS guarantees. In this paper, scheduling mechanism for supporting QoS differentiation among multiple traffic classes in IP differentiated services networks is studied. A scheduling algorithm called Multiclass Efficient Packet Fair Queueing (MEPFQ) is proposed that enables fair bandwidth sharing while supporting better bounds on end-to-end network delay for QoS-sensitive applications such as voice over IP (VoIP) within the DiffServ framework. The mechanism allows to create service classes and assign proportional weights to such classes efficiently according to their resource requirements. Besides, MEPFQ tries to ensure that packets from low priority class will not be starved even under extreme congestion cases. The results from the simulation studies show that the mechanism is able to ensure both the required end-to-end network delay bounds and bandwidth fairness for QoS-sensitive applications based on the specified service weights under various traffic and network conditions. Another important aspect of the MEPFQ algorithm is that the scheme has lower implementation complexity, along with scalability to accommodate the growing traffic flows at the core routers of high-speed Internet backbone.
We propose a novel optical signal processing using an optically pumped vertical-cavity surface-emitting laser (VCSEL) with an external light input. The mode transition between a fundamental and a 1st-high-order transverse mode is induced by an external light injection. Since a single mode fiber (SMF) spatially selects a fundamental transverse mode as an output signal, we are able to realize a nonlinear transfer function, which will be useful in future photonic networks. The mode transition characteristic of a 1.55 µm optically pumped two-mode VCSEL has been simulated by using a two-mode rate equation, which includes the effects of spatial hole burning and spectral hole burning as gain saturation coefficients. We focus on the detuning effect in the injection locking. When the wavelength of an input light with a fundamental mode is slightly longer than that of a VCSEL operating in a 1st-high-order transverse mode, the transverse mode of the VCSEL is switched to a fundamental mode at a critical input power level. This gives us an ideal transfer function for 2R (reamplification and reshaping) regeneration. Also, the proposed scheme may enable polarization insensitive signal processing, which is a unique feature in surface emitting lasers.
Free-standing 2D slab photonic band-edge lasers based on square lattice and triangular lattice are realized by optical pumping at room-temperature. Both in-plane-emission and surface-emission photonic band-edge lasers are observed and compared. Analyses on optical loss mechanisms for finite-size photonic band-edge lasers are also discussed.
Juhoon BACK Nam H. JO Young I. SON Hyungbo SHIM Jin H. SEO
There exists a class of nonlinear systems which fail to have a well-defined relative degree but have a robust relative degree. We have removed the full relative degree assumption which the previous results required, and have provided a local state observer for nonlinear systems that have robust relative degree γ n and have detectability property in some sense. The proposed observer utilizes the coordinate change which transforms the system into an approximate normal form. Using the proposed method, we constructed an observer for the ball and beam system on a vibrating frame. Simulation results reveal that substantial improvement in the performance is achieved compared with other local observers.
Katsunobu IMAI Akihiko IKAZAKI Chuzo IWAMOTO Kenichi MORITA
A number-conserving cellular automaton (NCCA) is a cellular automaton (CA) such that all states of cells are represented by integers and the sum of the cell states is conserved throughout its computing process. It can be thought of as a kind of modelization of the physical conservation law of mass or energy. It is known that the local function of a two-dimensional 45-degree reflection-symmetric von Neumann neighbor NCCA can be represented by linear combinations of a binary function. In spite of the number-conserving constraints, it is possible to design an NCCA with complex rules by employing this representation. In this paper, we study the case in which the binary function depends only on the difference of two cell states, i.e., the case in which the function can be regarded as a unary one and its circuit for applying rules to a cell only need adders and a single value table look up module. Even under this constraint, it is possible to construct a logically universal NCCA.
Feng LIU Taiyi ZHANG Jiancheng SUN
In this paper a new adaptive multi-input multi-output (MIMO) channel estimation and multiuser detection algorithm based kernel space iterative inversion is proposed. The functions of output signals are mapped from a low dimensional space to a high dimensional reproducing kernel Hilbert space. The function of the output signals is represented as a linear combination of a set of basis functions, and a Mercer kernel function is constructed by the distribution function. In order to avoid finding the function f(.) and g(.), the correlation among the output signals is calculated in the low dimension space by the kernel. Moreover, considering the practical application, the algorithm is extended to online iteration of mixture system. The computer simulation results illustrated that the new algorithm increase the performance of channel estimation, the global convergence, and the system stability.
Satoshi IWAMOTO Yasuhiko ARAKAWA
We discuss photonic crystals (PhCs) with advanced micro/nano-structres which are semiconductor quantum dots (QDs) and micro electro-mechanical systems (MEMS) for the purpose of realizing novel classes of PhC devices in future photonic network system. After brief introduction on advantages to implement QDs and MEMS with PhCs, we discuss optical characterization of PhC microcavity containing self-assembled InAs QDs. Modification of emission spectrum of a QD ensemble due to the resonant cavity modes is demonstrated. We also point out the feasibility of low-threshold PhC lasers with QD active media in numerical analysis. A very low threshold current of 10 µA is numerically obtained for lasing action in the multi dimensional distributed feedback mode by using realistic material parameters. Then, the basic concept for MEMS-controlled PhC slab devices is described. We show numerical results that demonstrate some of interesting functions such as the intensity modulation and the tuning of resonant frequency of cavity mode. Finally, a preliminary experiment of MEMS-based switching operation in a PhC line-defect waveguide is demonstrated.
Tomoyuki YOSHIE Oleg B. SHCHEKIN Hao CHEN Dennis G. DEPPE Axel SCHERER
We have demonstrated low-threshold two-dimensional photonic crystal lasers with self-assembled InAs/GaAs quantum dots. Coupled cavity designs of whispering gallery modes are defined in square lattice photonic crystal slabs. Our lasers showed a small 120 µW input pumping power threshold. Actual absorption power is evaluated to be less than 20 µW. Our lasers show high spontaneous emission coupling (β) factors0.1. The mode volumes are expected to be 0.7-1.2 times cubed wavelength by our modelling. Based on threshold analysis, 80 QDs are the effective number of QDs defined as the number of QDs needed to make PC cavities transparent if they are on maximum optical field points. Using the same analysis we found that single quantum dot lasing is likely to occur both by proper alignment of the single quantum dot relative to geometries of photonic crystals and by using sharp QD emission lines in high-Q localized modes.
The multimedia applications have recently generated much interest in wireless network infrastructure with supporting the quality-of-service (QoS) communications. In this paper, we propose a lantern-tree-based QoS on-demand multicast protocol for wireless ad hoc networks. Our proposed scheme offers a bandwidth routing protocol for QoS support in a multihop mobile network, where the MAC sub-layer adopts the CDMA-over-TDMA channel model. The QoS on-demand multicast protocol determines the end-to-end bandwidth calculation and bandwidth allocation from a source to a group of destinations. In this paper, we identify a lantern-tree for developing the QoS multicast protocol to satisfy certain bandwidth requirement, while the lantern-tree is served as the multicast-tree. Our lantern-tree-based scheme offers a higher success rate to construct the QoS multicast tree due to using the lantern-tree. The lantern-tree is a tree whose sub-path is constituted by the lantern-path, where the lantern-path is a kind of multi-path structure. This obviously improves the success rate by means of multi-path routing. In particular, our proposed scheme can be easily applied to most existing on-demand multicast protocols. Performance analysis results demonstrate the achievements of our proposed protocol.
Hideaki YOSHIFUJI Kazunori MIYAZAWA Masahide NAKAMURA Yuji SEKIYA Hiroshi ESAKI Jun MURAI
IPv6 is realized as the next generation internet platform, succeeding the current IPv4 internet environment. Linux, one of the major operating systems, has supported IPv6 since 1996, however, the quality of the protocol stack has not been good enough for professional operation. In this paper, we show our IPv6 stack implementation design regarding the neighbor management in Neighbor Discovery Protocol (NDP), the routing table management and the packet processing using XFRM architecture. The implementation is designed based on the Serialized Data State Processing, which aims at simpler object management so as to achieve stable, flexible and extensible IPv6 stack. According to the TAHI IPv6 Protocol Conformance Test Suite, we can show our implementation achieves enough implementation quality.
Marko LONAR Tomoyuki YOSHIE Koichi OKAMOTO Yueming QIU Jelena VUKOVI Axel SCHERER
We have designed, fabricated and characterized efficient optical resonators and low-threshold lasers based on planar photonic crystal concept. Lasers with InGaAsP quantum well active material emitting at 1550 nm were optically pumped, and room temperature lasing was observed at threshold powers below 220 µW. Porous high quality factor cavity that we have developed confines light in the air region and therefore our lasers are ideally suited for investigation of interaction between light and matter on a nanoscale level. We have demonstrated the operation of photonic crystal lasers in different ambient organic solutions, and we have showed that planar photonic crystal lasers can be used to perform spectroscopic tests on femtoliter volumes of analyte.
Satoshi KAWATA Satoru SHOJI Hong-Bo SUN
Lasers have been established as a unique nanoprocessing tool due to its intrinsic three-dimensional (3D) fabrication capability and the excellent compatibility to various functional materials. Here we report two methods that have been proved particularly promising for tailoring 3D photonic crystals (PhCs): pinpoint writing via two-photon photopolymerization and multibeam interferential patterning. In the two-photon fabrication, a finely quantified pixel writing scheme and a method of pre-compensation to the shrinkage induced by polymerization enable high-reproducibility and high-fidelity prototyping; well-defined diamond-lattice PhCs prove the arbitrary 3D processing capability of the two-photon technology. In the interference patterning method, we proposed and utilized a two-step exposure approach, which not only increases the number of achievable lattice types, but also expands the freedom in tuning lattice constant.
By means of the three-dimensional (3D) finite-difference time domain (FDTD) method, we have investigated in detail the optical properties of a two-dimensional photonic crystal (PC) surface-emitting laser having a square-lattice structure. The 3D-FDTD calculation is carried out for the finite size PC slab structure. The device is based on band-edge resonance, and plural band edges are present at the corresponding band edge point. For these band edges, we calculate the mode profile in the PC slab, far field pattern (FFP) and polarization mode of the surface-emitted component, and photon lifetime. FFPs are shown to be influenced by the finiteness of the structure. Quality (Q) factor, which is a dimensionless quantity representing photon lifetime, is introduced. The out-plane radiation loss in the direction normal to the PC plane greatly influences the total Q factor of resonant mode and is closely related with the band structure. As a result, Q factors clearly differ among these band edges. These results suggest that these band edges include resonant modes that are easy to lase and resonant modes that are difficult to lase.
Mikinori SUZUKI Md. Abul KASHEM Shinzo MORITA
AFM/STM observations were performed on sub nm thick C-Au-S film by co-operation process of plasma CVD and sputtering with using CH4, SF6 and Ar mixture gas and Au plate discharge electrode. From the refractive index values, the conductive granular molecules with a size of 0.4-0.6 nm were expected to exist in the film. For the film at thickness similar to the molecular size, Ra (arithmetic mean departures of roughness profile from the mean line) values were measured to be 0.712/6.10 nm by AFM/STM measurement, respectively. The one order large STM Ra value compared to the AFM Ra value suggests that the film contains conductive granular molecules.
Masayuki WADA Kazuya TADA Mitsuyoshi ONODA
A device structure for polymer Schottky diode, which has the glass chimney as a dopant reservoir enabling the reduction of series resistance without cathode corrosion, has been proposed. Doping with the acetonitrile solution of FeCl3 in the device resulted in the increase in the forward-bias current by one order of magnitude without notable increase in reverse-bias current, suggesting that the doping reduced the series resistance. It is found that the penetration speed depends on the solvents. Short time doping with the nitromethane solution of FeCl3 resulted in the increase by three orders of magnitude. However, doping for a long period yielded the considerable increase in the reverse-bias current due to the complete penetration of dopatn solution. When the upper opening of glass chimney of device is left opened and the sample after doping stored in air, the forward-bias current of the device reduced rapidly due to the undoping and/or degradation of polymer. It is possible to protect the degradation of device characteristics after doping, by sealing the chimney and storing the device in vacuum.
Satoshi HIEDA Yoshinori SAIDA Hiroshi CHISHIMA Naoki SATO Yukikazu NAKAMOTO
SMIL is a markup language which enables us to describe multimedia contents. This paper proposes a design model of SMIL browser functionality for mobile phones whose resources are limited. We introduce SMIL Component, which is based on attachable software architecture to a pre-installed generic web browser and an event-based SMIL scheduler, which is a part of SMIL Component, to provide the multimedia presentation scheduling functionality. These lead to reducing the memory amount that SMIL Component consumes and brings high portabilty of SMIL Component for various web browsers. We implement SMIL Component and evaluate RAM sizes and presentation delays. As a result, we conclude that SMIL Component is practical for MMS presentations on a mobile phone.
Tomoya SAITO Kyoko KATO Hiroshi INAI
As an access network to the Internet, CATV/HFC network has been widespread recently. Such a network employs a reservation access method under which reservation and data transmission periods appear by turns. Before data transmission, a station must send a request in a random access manner during the reservation period called a request cluster. If the cluster size is large, the probability of request collision occurrence becomes small. A large cluster size however increases the packet transmission delay. Moreover the throughput decreases since vacant duration of reservation period increases. DOCSIS, a de facto standard for the networks, employs the binary back-off method for request cluster allocation. Since that method normally allocates unnecessary large request cluster, the transmission delay increases under heavy load conditions. In this paper, we propose a request cluster allocation method which dynamically changes the cluster size according to the load conditions. In order to evaluate performance of the proposed method, we build a queuing model and execute computer simulation. Simulation result shows that the proposed method provides smaller delay than the binary back-off method.
Xiaodong REN Shidong ZHOU Zucheng ZHOU
This letter introduces a novel multi-user detection method, successive interference cancellation based on the order of log-likelihood-ratio(LLR-SIC), for code division multiple access (CDMA) systems. Unlike the conventional successive interference cancellation (SIC) based on the order of correlation, LLR-SIC operates on the fact that the user with the largest absolute value of log-likelihood ratio (LLR) should be first detected and cancelled from received signal. Simulation results show that LLR-SIC significantly outperforms the conventional SIC and partial parallel interference cancellation (P-PIC) over Rayleigh fading channels, and that LLR-SIC performance is not sensitive to channel estimation error at medium Eb/N0.
Bon-Jin KU Jong-Moon CHUNG Changeon KANG
In this letter, we investigate serially concatenated space-time codes (SC-STs) applying iterative decoding topologies in wideband code division multiple access (WCDMA) communication systems. In the decoding algorithm, an iterative (turbo) process is used, where a priori probability (APP) is exchanged between the symbol-by-symbol space-time (ST) decoder and the bit-by-bit convolutional decoder. The experimental results show that in a Rayleigh fading channel environment the serially concatenated interleaved space-time coding systems show significant error correction capability, and based on the applied system configurations, the nonrecursive ST code outperforms the recursive ST code.