Quick Response (QR) code is a two dimensional barcode widely used in many applications. A standard QR code consists of black and white square modules, and it appears randomized patterns. By modifying the modules using certain rule, it is possible to display a logo image on the QR code. Such a QR code is called an aesthetic QR code. In this paper, we change the encoding method of the Reed-Solomon (RS) code to produce an aesthetic QR code without sacrificing its error correcting capability. The proposed method randomly produces candidates of RS blocks and finds the best one during encoding. Considering an image to be displayed, we also introduce a weighting function during random selection that classifies the visually important regions in the image. We further investigate the shape of modules which represents the image and consider the trade-off between the visual quality and its readability. As a result, we can produce a beautiful aesthetic QR code, which still can be decoded by standard QR code reader.

Research on intrusion-tolerant systems (ITSs) is being conducted to protect critical systems which provide useful information services. To provide services reliably, these critical systems must not have even a single point of failure (SPOF). Therefore, most ITSs employ redundant components to eliminate the SPOF problem and improve system reliability. However, systems that include identical components have common vulnerabilities that can be exploited to attack the servers. Attackers prefer to exploit these common vulnerabilities rather than general vulnerabilities because the former might provide an opportunity to compromise several servers. In this study, we analyze software vulnerability data from the National Vulnerability Database (NVD). Based on the analysis results, we present a scheme that finds software combinations that minimize the risk of common vulnerabilities. We implement this scheme with CSIM20, and simulation results prove that the proposed scheme is appropriate for a recovery-based intrusion tolerant architecture.

An efficient balanced truncation for RC and RLC networks is presented in this paper. To accelerate the balanced truncation, sparse structures of original networks are considered. As a result, Lyapunov equations, the solutions of which are necessary for making the transformation matrices, are efficiently solved, and the reduced order models are efficiently obtained. It is proven that reciprocity of original networks is preserved while applying the proposed method. Passivity of the reduced RC networks is also guaranteed. In the illustrative examples, we will show that the proposed method is compatible with PRIMA in efficiency and is more accurate than PRIMA.

After the East Japan great earthquake on March 11, 2011, many Japanese coastal resident areas were isolated from other because of destruction of information infrastructure, disconnection of communication network and excessive traffic congestion. The undelivered disaster information influenced the speed of evacuation, rescue of injured residents, and sending life-support materials to evacuation shelters. From the experience of such disaster, more robust and resilient networks are strongly required, particularly for preparation of large scale disasters. In this paper, in order to respond to those problems, we introduce Delay Tolerant Network (DTN) for disaster information transmission application in challenged network environment. Message delivery by transport vehicles such as cars between disaster-response headquarter and evacuation shelters in challenged network environment is considered. A improved message delivery method combined with DTN protocols and cognitive wireless network is explained. The computer simulation for the actual rural area in Japan is made to evaluate the performance and effectiveness of proposed method.

One of the major subjects for marine resources development and information processing is how to realize underwater short-range and large-capacity data transmissions. The acoustic wave is an effective carrier and has been used for underwater data transmissions because it has lower attenuation in seawater than the radio wave, and has average propagation distance of about 10km or more. However, along with the imaging of transmission data, the inherent low speed of the acoustic wave makes it cannot and become an ideal carrier for high-speed and large-capacity communications. On the other hand, visible-light wave with wavelength of 400nm-650nm is an ideal carrier, which has received much attention. Its attractive features are high transparency and low attenuation rate in underwater, easily control the propagation direction and range by the visibility, and high data rate and capacity, making it excellent for application in underwater wireless communications. However, visible-light waves in the seawater have the spectral attenuation characteristics due to different marine environment. Therefore, in this paper an underwater optical wireless communication method with adaptation seawater function is considered for seawater turbidity of the spatio-temporal change. Two crucial components in the underwater optical wireless communication system, the light wavelength and the modulation method are controlled using wavelength- and modulation-adaptation techniques, respectively. The effectiveness of the method of the adaptation wavelength is demonstrated in underwater optical image transmissions.

In these days, we can see digital signages in many places, for example, inside stations or trains with the distribution of attractive promotional video clips. Users can easily get additional information related to such video clips via mobile devices such as smartphone by using some websites for retrieval. However, such retrieval is time-consuming and sometimes leads users to incorrect information. Therefore, it is desirable that the additional information can be directly obtained from the video clips. We implement a suitable digital watermarking method on smartphone to extract watermarks from video clips on signages in real-time. The experimental results show that the proposed method correctly extracts watermarks in a second on smartphone.

Audio hashing has been successfully employed for protection, management, and indexing of digital music archives. For a reliable audio hashing system, improving hash matching accuracy is crucial. In this paper, we try to improve a binary audio hash matching performance by utilizing auxiliary information, resilience mask, which is obtained while constructing hash DB. The resilience mask contains reliability information of each hash bit. We propose a new type of resilience mask by considering spectrum scaling and additive noise distortions. Experimental results show that the proposed resilience mask is effective in improving hash matching performance.

We previously proposed an unsupervised model using the inclusion-exclusion principle to compute sentence information content. Though it can achieve desirable experimental results in sentence semantic similarity, the computational complexity is more than O(2n). In this paper, we propose an efficient method to calculate sentence information content, which employs the thinking of the difference set in hierarchical network. Impressively, experimental results show that the computational complexity decreases to O(n). We prove the algorithm in the form of theorems. Performance analysis and experiments are also provided.

Malware proliferation has become a serious threat to the Internet in recent years. Most current malware are subspecies of existing malware that have been automatically generated by illegal tools. To conduct an efficient analysis of malware, estimating their functions in advance is effective when we give priority to analyze malware. However, estimating the malware functions has been difficult due to the increasing sophistication of malware. Actually, the previous researches do not estimate the functions of malware sufficiently. In this paper, we propose a new method which estimates the functions of unknown malware from APIs or categories observed by dynamic analysis on a host. We examine whether the proposed method can correctly estimate the malware functions by the supervised machine learning techniques. The results show that our new method can estimate the malware functions with the average accuracy of 83.4% using API information.

We propose a new direction-of-arrival (DOA) estimation method of wideband signals. In several decades, many approaches to estimate DOA of wideband signal sources have been proposed. Test of orthogonality of projected subspaces (TOPS) and Squared TOPS are the estimation algorithms to realize high resolution performance of closely spaced signal sources. These methods, however, are not suitable for DOA estimation of multiple signal sources, because the spatial spectrum calculated by Squared TOPS has some false peaks. Therefore, the authors have proposed the weighted squared TOPS (WS-TOPS) to suppress these false peaks by modifying the orthogonality evaluation matrix, WS-TOPS also achieves better DOA estimation accuracy than that of Squared TOPS. On the other hand, WS-TOPS has a drawback, it requires high computational complexity. Our new method can realize good DOA estimation performance, which is better than that of Squared TOPS, with low computational complexity by reducing the size of orthogonality evaluation matrix and the number of subspaces to be used. Simulation results show that the new method can provide high resolution performance and high DOA estimation accuracy with low computational complexity.

Compressed sensing (CS)-based wideband spectrum sensing approaches have attracted much attention because they release the burden of high signal acquisition costs. However, in CS-based sensing approaches, highly non-linear reconstruction methods are used for spectrum recovery, which require high computational complexity. This letter proposes a two-step compressive wideband sensing algorithm. This algorithm introduces a coarse sensing step to further compress the sub-Nyquist measurements before spectrum recovery in the following compressive fine sensing step, as a result of the significant reduction in computational complexity. Its enabled sufficient condition and computational complexity are analyzed. Even when the sufficient condition is just satisfied, the average reduced ratio of computational complexity can reach 50% compared with directly performing compressive sensing with the excellent algorithm that is used in our fine sensing step.

This paper investigates the data persistence problem with compressive sensing (CS) in wireless sensor networks (WSNs) where the sensed readings should be temporarily stored among the entire network in a distributed manner until gathered by a mobile sink. Since there is an energy-performance tradeoff, conventional CS-based schemes only focus on reducing the energy consumption or improving the CS construction performance. In this paper, we propose an efficient Compressive Sensing based Data Persistence (CSDP) scheme to achieve the optimum balance between energy consumption and reconstruction performance. Unlike most existing CS-based schemes which require packets visiting the entire network to reach the equilibrium distribution, in our proposed scheme information exchange is only performed among neighboring nodes. Therefore, such an approach will result in a non-uniform distribution of measurements, and the CS measurement matrix depends heavily on the node degree. The CS reconstruction performance and energy consumption are analyzed. Simulation results confirm that the proposed CSDP scheme consumes the least energy and computational overheads compared with other representative schemes, while almost without sacrificing the CS reconstruction performance.

Due to outsourcing of numerous stages of the IC manufacturing process to different foundries, the security risk, such as hardware Trojan becomes a potential threat. In this paper, we present a layout aware localized hardware Trojan detection method that magnifies the detection sensitivity for small Trojan in power-based side-channel analysis. A scan segmentation approach with a modified launch-on-capture (LoC) transition delay fault test pattern application technique is proposed so as to maximize the dynamic power consumption of any target region. The new architecture allows activating any target region and keeping others quiet, which reduces total circuit toggling activity. We evaluate our approach on ISCAS89 benchmark and two practical circuits to demonstrate its effectiveness in side-channel analysis.

Video data mining based on topic models as an emerging technique recently has become a very popular research topic. In this paper, we present a novel topic model named sequential correspondence hierarchical Dirichlet processes (Seq-cHDP) to learn the hidden structure within video data. The Seq-cHDP model can be deemed as an extended hierarchical Dirichlet processes (HDP) model containing two important features: one is the time-dependency mechanism that connects neighboring video frames on the basis of a time dependent Markovian assumption, and the other is the correspondence mechanism that provides a solution for dealing with the multimodal data such as the mixture of visual words and speech words extracted from video files. A cascaded Gibbs sampling method is applied for implementing the inference task of Seq-cHDP. We present a comprehensive evaluation for Seq-cHDP through experimentation and finally demonstrate that Seq-cHDP outperforms other baseline models.

The sparse representation models have been widely applied in image super-resolution. The certain optimization problem is supposed and can be solved by the iterative shrinkage algorithm. During iteration, the update of dictionaries and similar patches is necessary to obtain prior knowledge to better solve such ill-conditioned problem as image super-resolution. However, both the processes of iteration and update often spend a lot of time, which will be a bottleneck in practice. To solve it, in this paper, we present the concept of image quality difference based on generalized Gaussian distribution feature which has the same trend with the variation of Peak Signal to Noise Ratio (PSNR), and we update dictionaries or similar patches from the termination strategy according to the adaptive threshold of the image quality difference. Based on this point, we present two sparse representation algorithms for image super-resolution, one achieves the further improvement in image quality and the other decreases running time on the basis of image quality assurance. Experimental results also show that our quantitative results on several test datasets are in line with exceptions.

This letter proposes a cooperative communication scheme with pre-coding in order to improve a performance in a wireless communication system. In a conventional scheme, a performance of the system is degraded due to the signal attenuation by the path loss and inter-cell interference (ICI). The proposed scheme uses two relays in order to obtain a diversity gain. Additionally, the proposed scheme uses a constructive spatial phase coding (SPC) using the phase relation of the channels in order to obtain an improved diversity gain. Therefore, the proposed scheme can prevent the performance degradation caused by the path loss. When a mobile is located in the cell edge, the signal suffers from the ICI by the other signals transmitted from a neighboring base station. In the proposed scheme, the other signals broadcast from neighboring base station are destructively superimposed by using the destructive SPC scheme. And then the power of the destructively superimposed signal is reduced. Therefore, the proposed scheme can reduce the ICI effect in the cell edge. Also, the destructively superimposed signal does not cause the performance degradation of other mobiles in the neighboring cell. The simulation results show that the bit error performance of the proposed scheme is better than the conventional scheme.

In this paper, a new class of low-hit-zone (LHZ) frequency-hopping sequence sets (LHZ FHS sets) is constructed based upon the Cartesian product, and the periodic partial Hamming correlation within its LHZ are studied. Studies have shown that the new LHZ FHS sets are optimal according to the periodic partial Hamming correlation bounds of FHS set, and some known FHS sets are the special cases of this new construction.

It is expected that a large number of different objects, such as sensor devices and consumer electronics, will be connected to future networks. For such networks, we propose a name resolution method for directly specifying a condition on a set of attribute-value pairs of real-world information without needing prior knowledge of the uniquely assigned name of a target object, e.g., a URL. For name resolution, we need an algorithm to find the target object(s) satisfying a query condition on multiple attributes. To address the problem that multi-attribute searching algorithms may not work well when the number of attributes (i.e., dimensions) d increases, which is related to the curse of dimensionality, we also propose a probabilistic searching algorithm to reduce searching time at the expense of a small probability of false positives. With this algorithm, we choose permutation pattern(s) of d attributes to use the first K (K « d) ones to search objects so that they contain relevant attributes with a high probability. We argue that our algorithm can identify the target objects at a false positive rate less than 10-6 and a few percentages of tree-searching cost compared with a naive d-dimensional searching under a certain condition.

This paper proposes novel simplified maximum likelihood detection for XOR physical layer network coding (XOR-PNC) in bi-directional wireless relay systems with Quaternary phase shift keying (QPSK). The proposed detection applies unitary precoding to achieve superior performance without computationally prohibitive exhaustive search. The performance of the XOR employing the proposed simplified MLD with the precoding is analyzed in relay systems with orthogonal frequency division multiplexing (OFDM). The performance of the XOR-PNC with the proposed techniques is also evaluated by computer simulation. The XOR-PNC with the proposed techniques achieves about 7dB better performance than the amplify-and-forward physical layer network coding in the 5-path fading channel at BER=10-4. It is also shown that the XOR-PNC with the proposed techniques achieves better performance than that without precoding.

We propose a novel improved characteristic basis function method (IP-CBFM) for accurately analysing the radar cross section (RCS). This new IP-CBFM incorporates the effect of higher-order multiple scattering and has major influences in analyzing monostatic RCS (MRCS) of single incidence and bistatic RCS (BRCS) problems. We calculated the RCS of two scatterers and could confirm that the proposed IP-CBFM provided higher accuracy than the conventional method while significantly reducing the number of CBF.