In this paper, we propose a robust registration method, named Bounded-Variables Least Median of Squares (BVLMS). It overcomes both the misassociations and the ill-conditioning due to the interactions between Bounded-Variables Least Squares (BVLS) and Least Median of Squares (LMS). Simulation results demonstrate the feasibility of this new registration method.

In this study, we investigate the use of scheduling algorithms to support coordinated multipoint (CoMP) operation for Long Term Evolution (LTE)-Advanced systems studied in the 3rd Generation Partnership Project (3GPP). CoMP, which improves cooperative transmission among network nodes (transmission points: TPs) and reduces or eliminates interTP interference, enabling performance improvements in cell edge throughputs. Although scheduling algorithms in LTE systems have been extensively investigated from the single cell operation perspective, those extension to CoMP where each user equipment (UE) has multiple channel state information (CSI) feedbacks require further consideration on proportional fairness (PF) metric calculation while maintaining PF criteria. To this end, we propose to apply a scaling factor in accordance with the number of CSI feedbacks demanded for the UE. To evaluate the benefits of this scaling factor, multicell system-level simulations that take account of channel estimation errors are performed, and the results confirmed that our improved algorithm enables fairness to be maintained.

We designed multilayer wavelength-selective reflector films by stacking thin-films of transparent polymer. The optimum structure of the multilayer is determined using a combination of characteristic matrix method and a version of genetic algorithm. Such multilayer films can be used in LCD devices to enhance the color saturation of the display.

In this paper, we propose a novel content-aware image resizing method based on grid transformation. Our method focuses on not only keeping important regions unchanged but also keeping the aspect ratio of the main object in an image unchanged. The dual conditions can avoid distortion which often occurs when only using the former condition. Our method first calculates image importance. Next, we extract the main objects on an image by using image importance. Finally, we calculate the optimal grid transformation which suppresses changes in size of important regions and in the aspect ratios of the main objects. Our method uses lower and upper thresholds for transformation to suppress distortion due to extreme shrinking and enlargement. To achieve better resizing results, we introduce a boundary discarding process. This process can assign wider regions to important regions, reducing distortions on important regions. Experimental results demonstrate that our proposed method resizes images with less distortion than other resizing methods.

This letter presents a novel approach for automatic multimodal affect recognition. The audio and visual channels provide complementary information for human affective states recognition, and we utilize Boltzmann zippers as model-level fusion to learn intrinsic correlations between the different modalities. We extract effective audio and visual feature streams with different time scales and feed them to two component Boltzmann chains respectively. Hidden units of the two chains are interconnected to form a Boltzmann zipper which can effectively avoid local energy minima during training. Second-order methods are applied to Boltzmann zippers to speed up learning and pruning process. Experimental results on audio-visual emotion data recorded by ourselves in Wizard of Oz scenarios and collected from the SEMAINE naturalistic database both demonstrate our approach is robust and outperforms the state-of-the-art methods.

In this letter, by using Whiteman's generalized cyclotomy of order 2 over Zpq, where p, q are twin primes, we construct new perfect Gaussian integer sequences of period pq.

This paper proposes a robust bilateral filter which can handle mixed Gaussian and impulsive noise by hybridizing the conventional bilateral filter and the switching median filter. The effectiveness of the proposed method is verified in comparison with other conventional methods by some experiments using the natural digital images.

In this letter, we present a novel cooperative spectrum sensing scheme for cognitive radio systems. The proposed approach is based on a consensus algorithm. Using the received signals, we set up a formula for the consensus algorithm, which guarantees a convergence to an agreement value. The simulation results exhibit that the performance of the consensus-based cooperative scheme is much better than that of the conventional cooperative technique in the case that the cooperative nodes for spectrum sensing are sparsely distributed in cognitive radio systems.

The present paper proposes two new methods for constructing polyphase asymmetric zero-correlation zone (A-ZCZ) sequence sets. In previous studies, the authors proposed methods for constructing quasi-optimal polyphase A-ZCZ sequence sets using perfect sequences and for constructing optimal polyphase A-ZCZ sequence sets using discrete Fourier transform (DFT) matrices. However, in these methods, the total number of sequences in an A-ZCZ sequence set cannot exceed the period of the perfect sequence or the dimension of the DFT matrix used for constructing the A-ZCZ sequence set. We now propose two extended versions of these methods. The proposed methods can generate a quasi-optimal or optimal polyphase A-ZCZ sequence set where the total number of sequences exceeds the period of the perfect sequence or the dimension of the DFT matrix. In other words, the proposed methods can generate new A-ZCZ sequence sets that cannot be obtained from the known methods.

In this paper, we consider the problem of inferring a Boolean network (BN) from a given set of singleton attractors, where it is required that the resulting BN has the same set of singleton attractors as the given one. We show that the problem can be solved in linear time if the number of singleton attractors is at most two and each Boolean function is restricted to be a conjunction or disjunction of literals. We also show that the problem can be solved in polynomial time if more general Boolean functions can be used. In addition to the inference problem, we study two network completion problems from a given set of singleton attractors: adding the minimum number of edges to a given network, and determining Boolean functions to all nodes when only network structure of a BN is given. In particular, we show that the latter problem cannot be solved in polynomial time unless P=NP, by means of a polynomial-time Turing reduction from the complement of the another solution problem for the Boolean satisfiability problem.

Network tomography is a technique for estimating internal network characteristics from end-to-end measurements. In this paper, we focus on loss tomography, which is a network tomography problem for estimating link loss rates. We study a loss tomography problem to detect links with high link loss rates in network environments with dynamically changing link loss rates, and propose a window-based sequential loss tomography scheme. The loss tomography problem is formulated as an underdetermined linear inverse problem, where there are infinitely many candidates of the solution. In the proposed scheme, we use compressed sensing, which can solve the problem with a prior information that the solution is a sparse vector. Measurement nodes transmit probe packets on measurement paths established between them, and calculate packet loss rates of measurement paths (path loss rates) from probe packets received within a window. Measurement paths are classified into normal quality and low quality states according to the path loss rates. When a measurement node finds measurement paths in the low quality states, link loss rates are estimated by compressed sensing. Using simulation scenarios with a few link states changing dynamically from low to high link loss rates, we evaluate the performance of the proposed scheme.

In this paper, a practical antenna selection (AS) scheme is investigated for downlink multiuser massive multiple input multiple output (MIMO) networks where a base station (BS) is equipped with many antennas (N) and communicates with K mobile stations (MSs) simultaneously. In the proposed antenna selection technique, S antennas (S≤N) are selected for transmission based on the knowledge of channel coefficients of each MS for reducing the number of RF chains which mainly induce cost increase in terms of size, hardware, and power. In the proposed AS technique, a BS first ranks antenna elements according to the sum of their channel gains to all MSs. Then, the BS computes the downlink sum-rate with S consecutive antenna elements in the ordered set, where the subset consisting of S consecutive antennas is called a window. The BS selects the window resulting in the highest sum-rate. The selected S antenna elements are used for transmitting signals to multiple users, while the remaining (N-S) antenna elements are turned off for the time slot. Therefore, the proposed AS technique requires only (N-S+1) sum-rate computations, while the optimal AS technique involves $inom{N}{S}$ computations. We analyze downlink sum-rate with the proposed AS technique and compare it with that of a reference system with the same number of antenna elements without AS. Our results show that the proposed AS technique significantly outperforms the reference scheme.

Traffic classification has recently gained much attention in both academic and industrial research communities. Many machine learning methods have been proposed to tackle this problem and have shown good results. However, when applied to traffic with out-of-sequence packets, the accuracy of existing machine learning approaches decreases dramatically. We observe the main reason is that the out-of-sequence packets change the spatial representation of feature vectors, which means the property of linear mapping relation among features used in machine learning approaches cannot hold any more. To address this problem, this paper proposes an Improved Dynamic Time Warping (IDTW) method, which can align two feature vectors using non-linear alignment. Experimental results on two real traces show that IDTW achieves better classification accuracy in out-of-sequence traffic classification, in comparison to existing machine learning approaches.

A new method for predominant melody extraction from polyphonic music signals based on harmonic structure is proposed. The proposed method first extracts a set of fundamental frequency candidates by analyzing the distance between spectral peaks. Then, the predominant fundamental frequency is selected by pitch tracking according to the harmonic strength of the selected candidates. Finally, the method runs pitch smoothing on a large temporal scale for eliminating pitch doubling error, and conducts voicing frame detection. The proposed method shows the best overall performance for ADC 2004 DB in the MIREX 2011 audio melody extraction task.

The paper introduces a novel pheromone update strategy to improve the functionality of ant colony optimization algorithms. This modification tries to extend the search area by an optimistic reinforcement strategy in which not only the most desirable sub-solution is reinforced in each step, but some of the other partial solutions with acceptable levels of optimality are also favored. therefore, it improves the desire for the other potential solutions to be selected by the following artificial ants towards a more exhaustive algorithm by increasing the overall exploration. The modifications can be adopted in all ant-based optimization algorithms; however, this paper focuses on two static problems of travelling salesman problem and classification rule mining. To work on these challenging problems we considered two ACO algorithms of ACS (Ant Colony System) and AntMiner 3.0 and modified their pheromone update strategy. As shown by simulation experiments, the novel pheromone update method can improve the behavior of both algorithms regarding almost all the performance evaluation metrics.

The most important advantage of HMM-based TTS is its highly intelligible. However, speech synthesized by HMM-based TTS is muffled and far from natural, especially under limited data conditions, which is mainly caused by its over-smoothness. Therefore, the motivation for this paper is to improve the naturalness of HMM-based TTS trained under limited data conditions while preserving its intelligibility. To achieve this motivation, a hybrid TTS between HMM-based TTS and the modified restricted Temporal Decomposition (MRTD), named HTD in this paper, was proposed. Here, TD is an interpolation model of decomposing a spectral or prosodic sequence of speech into sparse event targets and dynamic event functions, and MRTD is one simplified version of TD. With a determination of event functions close to the concept of co-articulation in speech, MRTD can synthesize smooth speech and the smoothness in synthesized speech can be adjusted by manipulating event targets of MRTD. Previous studies have also found that event functions of MRTD can represent linguistic information of speech, which is important to perceive speech intelligibility, while sparse event targets can convey the non-linguistics information, which is important to perceive the naturalness of speech. Therefore, prosodic trajectories and MRTD event functions of the spectral trajectory generated by HMM-based TTS were kept unchanged to preserve the high and stable intelligibility of HMM-based TTS. Whereas MRTD event targets of the spectral trajectory generated by HMM-based TTS were rendered with an original speech database to enhance the naturalness of synthesized speech. Experimental results with small Vietnamese datasets revealed that the proposed HTD was equivalent to HMM-based TTS in terms of intelligibility but was superior to it in terms of naturalness. Further discussions show that HTD had a small footprint. Therefore, the proposed HTD showed its strong efficiency under limited data conditions.

To understand human emotion, it is necessary to be aware of the surrounding situation and individual personalities. In most previous studies, however, these important aspects were not considered. Emotion recognition has been considered as a classification problem. In this paper, we attempt new approaches to utilize a person's situational information and personality for use in understanding emotion. We propose a method of extracting situational information and building a personalized emotion model for reflecting the personality of each character in the text. To extract and utilize situational information, we propose a situation model using lexical and syntactic information. In addition, to reflect the personality of an individual, we propose a personalized emotion model using KBANN (Knowledge-based Artificial Neural Network). Our proposed system has the advantage of using a traditional keyword-spotting algorithm. In addition, we also reflect the fact that the strength of emotion decreases over time. Experimental results show that the proposed system can more accurately and intelligently recognize a person's emotion than previous methods.

Logging the execution process of a program is a popular activity for practical program understanding. However, understanding the behavior of a program from a complete execution trace is difficult because a system may generate a substantial number of runtime events. To focus on a small subset of runtime events, a dynamic object process graph (DOPG) has been proposed. Although a DOPG can potentially facilitate program understanding, the logging process has not been adapted for DOPGs. If a developer is interested in the behavior of a particular object, only the runtime events related to the object are necessary to construct a DOPG. The vast majority of runtime events in a complete execution trace are irrelevant to the interesting object. This paper analyzes actual DOPGs and reports that a logging tool can be optimized to record only the runtime events related to a particular object specified by a developer.

We have studied photo-induced effects in a p-type transistor based on a [1]benzothieno[3,2-b]benzothiophene (BTBT) derivative. Repetition of blue light irradiation and electrical characterization under dark reveals that its threshold voltage gradually shifts in the positive direction as the cumulative exposure time increases. This shift is slowly reversed when the transistor is stored under dark. The onset voltage defined as the gate bias at which the sub-threshold current exceeds a certain level behaves in a similar manner. Mobility remains more or less the same during this exposure period and the storage period. Time evolution of the threshold voltage shift is fit by a model assuming two charged meta-stable states decaying independently. A set of parameters consists of a decay constant for each state and the ratio of the two states. A single parameter set reproduces the positive shift during the exposure period and the negative shift during the storage period. Time evolution of the onset voltage is reproduced by the same parameter set. We have also studied photo-induced effects in two types of n-type transistors where either a pure solution of a perylene derivative or a solution mixed with an insulating polymer is used for printing each semiconductor layer. A similar behavior is observed for these transistors: blue light irradiation under a negative gate bias shifts the threshold and the onset voltages in the negative direction and these shifts are reversed under dark. The two-component model reproduces the behavior of these voltage shifts and the parameter set is slightly different among the two transistors made from different semiconductor solutions. The onset voltage shift is well correlated to the threshold voltage shift for the three types of organic transistors studied here. The onset voltage is more sensitive to illumination than the threshold voltage and its sensitivity differs among transistors.

Considering the non-linear properties of the human visual system, many non-linear operators and models have been developed, particularly the logarithmic image processing (LIP) model proposed by Jourlin and Pinoli, which has been proved to be physically justified in several laws of the human visual system and has been successfully applied in image processing areas. Recently, several modifications based on this logarithmic mathematical framework have been presented, such as parameterized logarithmic image processing (PLIP), pseudo-logarithmic image processing, homomorphic logarithmic image processing. In this paper, a new single parameter logarithmic model for image processing with an adaptive parameter-based Sobel edge detection algorithm is presented. On the basis of analyzing the distributive law, the subtractive law, and the isomorphic property of the PLIP model, the five parameters in PLIP are replaced by a single parameter to ensure the completeness of the model and physical constancy with the nature of an image, and then an adaptive parameter-based Sobel edge detection algorithm is proposed. By using an image noise estimation method to evaluate the noise level of image, the adaptive parameter in the single parameter LIP model is calculated based on the noise level and grayscale value of a corresponding image area, followed by the single-parameter LIP-based Sobel operation to overcome the noise-sensitive problem of classical LIP-based Sobel edge detection methods, especially in the dark area of an image, while retaining edge sensitivity. Compared with the classical LIP and PLIP model, the given single parameter LIP achieves satisfactory results in noise suppression and edge accuracy.