Traditionally, in computer systems, file I/O has been a big performance bottleneck for I/O intensive applications. The recent advent of non-volatile byte-addressable memory (NVM) technologies such as STT-MRAM and PCM, provides a chance to store persistent data with a high performance close to DRAM's. However, as the location of the persistent storage device gets closer to the CPU, the system software layers overheads for accessing the data such as file system layer including virtual file system layer and device driver are no longer negligible. In this paper, we propose a light-weight user-level persistent storage, called UStore, which is physically allocated on the NVM and is mapped directly into the virtual address space of an application. UStore makes it possible for the application to fast access the persistent data without the system software overheads and extra data copy between the user space and kernel space. We show how UStore is easily applied to existing applications with little elaboration and evaluate its performance enhancement through several benchmark tests.

Gait-based owner authentication using accelerometers has recently been extensively studied owing to the development of wearable electronic devices. An actual gait signal is always subject to change due to many factors including variation of sensor attachment. In this research, we tackle to the practical sensor-orientation inconsistency, for which signal sequences are captured at different sensor orientations. We present an iterative signal matching algorithm based on phase-registration technique to simultaneously estimate relative sensor-orientation and register the 3D acceleration signals. The iterative framework is initialized by using 1D orientation-invariant resultant signals which are computed from 3D signals. As a result, the matching algorithm is robust to any initial sensor-orientation. This matching algorithm is used to match a probe and a gallery signals in the proposed owner authentication method. Experiments using actual gait signals under various conditions such as different days, sensors, weights being carried, and sensor orientations show that our authentication method achieves positive results.

Hardware acceleration is an essential technique for extracting and tracking moving objects in real time. It is desirable to design tracking algorithms such that they are applicable for parallel computations on hardware. Exclusive block matching methods are designed for hardware implementation, and they can realize detailed motion extraction as well as robust moving object tracking. In this study, we develop tracking hardware based on an exclusive block matching method on FPGA. This tracking hardware is based on a two-dimensional systolic array architecture, and can realize robust moving object extraction and tracking at more than 100 fps for QVGA images using the high parallelism of an exclusive block matching method, synchronous shift data transfer, and special circuits to accelerate searching the exclusive correspondence of blocks.

The exact power distribution of the inter-cell interference is obtained explicitly for cell edge users who are surrounded by circular guard zones. Compared with recent works, the underlying channel model is generalized from Rayleigh fading to a combination of Nakagami fading and Gamma shadowing. In addtion, asymptotic analysis shows that the mean power of intercell interference changes from infinite to finite with a guard zone. Based on this interference distribution, the average capacity at the cell edge is further obtained. Special case approximation indicates that the capacity scales proportionally to the exponential of the guard zone size. Analytical capacities are validated by Monte Carlo simulations.

In this letter, we research the method of using face and gesture image sequences to deal with the video-based bimodal emotion recognition problem, in which both Harris plus cuboids spatio-temporal feature (HST) and sparse canonical correlation analysis (SCCA) fusion method are applied to this end. To efficaciously pick up the spatio-temporal features, we adopt the Harris 3D feature detector proposed by Laptev and Lindeberg to find the points from both face and gesture videos, and then apply the cuboids feature descriptor to extract the facial expression and gesture emotion features [1],[2]. To further extract the common emotion features from both facial expression feature set and gesture feature set, the SCCA method is applied and the extracted emotion features are used for the biomodal emotion classification, where the K-nearest neighbor classifier and the SVM classifier are respectively used for this purpose. We test this method on the biomodal face and body gesture (FABO) database and the experimental results demonstrate the better recognition accuracy compared with other methods.

We describe a large-scale integrated circuit (LSI) design of rapid single-flux-quantum (RSFQ) circuits and demonstrate several reconfigurable data-path (RDP) processor prototypes based on the ISTEC Advanced Process (ADP2). The ADP2 LSIs are made up of nine Nb layers and Nb/AlOx/Nb Josephson junctions with a critical current density of 10kA/cm2, allowing higher operating frequencies and integration. To realize truly large-scale RSFQ circuits, careful design is necessary, with several compromises in the device structure, logic gates, and interconnects, balancing the competing demands of integration density, design flexibility, and fabrication yield. We summarize numerical and experimental results related to the development of a cell-based design in the ADP2, which features a unit cell size reduced to 30-µm square and up to four strip line tracks in the unit cell underneath the logic gates. The ADP LSIs can achieve ∼10 times the device density and double the operating frequency with the same power consumption per junction as conventional LSIs fabricated using the Nb four-layer process. We report the design and test results of RDP processor prototypes using the ADP2 cell library. The RDP processors are composed of many arrays of floating-point units (FPUs) and switch networks, and serve as accelerators in a high-performance computing system. The prototypes are composed of two-dimensional arrays of several arithmetic logic units instead of FPUs. The experimental results include a successful demonstration of full operation and reconfiguration in a 2×2 RDP prototype made up of 11.5k junctions at 45GHz after precise timing design. Partial operation of a 4×4 RDP prototype made up of 28.5k-junctions is also demonstrated, indicating the scalability of our timing design.

Blind source separation is a technique that can separate sound sources without such information as source location, the number of sources, and the utterance content. Multi-channel source separation using many microphones separates signals with high accuracy, even if there are many sources. However, these methods have extremely high computational complexity, which must be reduced. In this paper, we propose a computational complexity reduction method for blind source separation based on frequency domain independent component analysis (FDICA) and examine temporal data that are effective for source separation. A frame with many sound sources is effective for FDICA source separation. We assume that a frame with a low kurtosis has many sound sources and preferentially select such frames. In our proposed method, we used the log power spectrum and the kurtosis of the magnitude distribution of the observed data as selection criteria and conducted source separation experiments using speech signals from twelve speakers. We evaluated the separation performances by the signal-to-interference ratio (SIR) improvement score. From our results, the SIR improvement score was 24.3dB when all the frames were used, and 23.3dB when the 300 frames selected by our criteria were used. These results clarified that our proposed selection criteria based on kurtosis and magnitude is effective. Furthermore, we significantly reduced the computational complexity because it is proportional to the number of selected frames.

A reduction in the intensity deviation of a nine-channel optical frequency comb block (OFCB) is demonstrated, by adopting an asymmetric differential drive method for an InP-based dual drive Mach-Zehnder modulator. The generation of a tailored OFCB with an intensity deviation of less than 0.8dB is confirmed by using the modulator.

This study looks at how an e-Health System can reduce morbidity (poor health) in unreached communities. The e-Health system combines affordable sensors and Body Area Networking technology with mobile health concepts and is called a Portable Health Clinic. The health clinic is portable because all the medical devices fit inside a briefcase and are carried to unreached communities by a healthcare assistants. Patient morbidity is diagnosed using software stratification algorithm and categorized according to triage color-coding scheme within the briefcase. Morbid patients are connected to remote doctor in a telemedicine call center using the mobile network coverage. Electronic Health Records (EHR) are used for the medical consultancy and e-Prescription is generated. The effectiveness of the portable health clinic system to target morbidity was tested on 8690 patients in rural and urban areas of Bangladesh during September 2012 to January 2013. There were two phases to the experiment: the first phase identified the intensity of morbidity and the second phase re-examined the morbid patients, two months later. The experiment results show a decrease in patients to identify as morbid among those who participated in telemedicine process.

Superconducting Single-Flux-Quantum (SFQ) devices have been paid much attention as alternative devices for digital circuits, because of their high switching speed and low power consumption. For large-scale circuit design, the role of computer-aided design environment is significant. As the characteristics of the SFQ devices are different from conventional devices, a new design environment is required. In this paper, we propose a new timing-aware circuit description method which can be used for SFQ circuit design. Based on the description and the dedicated algorithms we have been developing for SFQ logic circuit design, we propose an integrated design flow for SFQ logic circuits. We have designed a circuit using our developed design tools along with the design flow and demonstrated the correct operation.

We describe the recent progress on a Nb nine-layer fabrication process for large-scale single flux quantum (SFQ) circuits. A device fabricated in this process is composed of an active layer including Josephson junctions (JJ) at the top, passive transmission line (PTL) layers in the middle, and a DC power layer at the bottom. We describe the process conditions and the fabrication equipment. We use both diagnostic chips and shift register (SR) chips to improve the fabrication process. The diagnostic chip was designed to evaluate the characteristics of basic elements such as junctions, contacts, resisters, and wiring, in addition to their defect evaluations. The SR chip was designed to evaluate defects depending on the size of the SFQ circuits. The results of a long-term evaluation of the diagnostic and SR chips showed that there was fairly good correlation between the defects of the diagnostic chips and yields of the SRs. We could obtain a yield of 100% for SRs including 70,000JJs. These results show that considerable progress has been made in reducing the number of defects and improving reliability.

This paper presents the strategy of MOS varactor's high-Q optimization, a novel scalable model for the quasi-millimeter-wave MOS varactors, and confirmation results by discrete MOS varactors and VCO measurements. To realize a high-Q MOS varactor in the quasi-millimeter-wave region, low MOS varactor capacitance and low series resistance of unit cell are essential. Downsizing is a key to realize both low capacitance and low resistance. However, it is induced by Cmax/Cmin reduction, simultaneously. Therefore, scalable MOS varactor model is necessary to use optimum MOS varactor to cover various application requirements using same process. Decreasing the MOS varactor's size of W/L =2µm/2µm to 0.5µm/0.26µm, the Q factor increased sevenfold at f =20GHz but Cmax/Cmin is reduced by 60%, by using conventional PSP model, an error of approximately 20% is shown. Proposed model has been improved its accuracy from 18.9% to 0.2% for N+ MOS varactor and from 22.1% to 0.8% for P+ MOS varactor, for minimum size of MOS varactor even if model covers wide dimension range. Also, it has been confirmed this model is covered in two types of layouts. Oscillation frequency and phase noise also have been confirmed by three types of 22GHz VCOs. The accuracy of oscillation frequency is less than 2.5% and that of phase noise at 1MHz offset from carrier is less than 5dB.

In this paper, we study the impact of opportunistic user scheduling on the outage probability of cognitive radio (CR) multiple-input multiple-output (MIMO) systems in the high power region where the peak transmit power constraint is higher than the peak interference constraint. The primary contributions of this paper are the derivation of exact closed-form expressions of the proposed scheduled CR-MIMO systems for outage probability and asymptotic analysis to quantify the diversity order and signal to noise ratio (SNR) gain. Through exact analytical results, we provide the achievable outage probability of the proposed scheduled systems as a function of SNR. Also, through asymptotic analysis, we show that the scheduled CR-MIMO systems provide some diversity order gain over the non-scheduled CR-MIMO systems which comes from multi-user diversity (MUD). Also, the SNR gain of the proposed scheduled systems is identical to that of the non-scheduled CR-MIMO systems.

The single flux quantum (SFQ) is expected to be a next-generation high-speed and low-power technology in the field of logic circuits. CMOS as the dominant technology for conventional processors cannot be replaced with SFQ technology due to the difficulty of implementing feedback loops and conditional branches using SFQ circuits. This paper investigates the applicability of a reconfigurable data-path (RDP) accelerator based on SFQ circuits. The authors introduce detailed specifications of the SFQ-RDP architecture and compare its performance and power/performance ratio with those of a graphics-processing unit (GPU). The results show at most 1600 times higher efficiency in terms of Flops/W (floating-point operations per second/Watt) for some high-performance computing application programs.

Biometric identification has recently attracted attention because of its convenience: it does not require a user ID nor a smart card. However, both the identification error rate and response time increase as the number of enrollees increases. In this paper, we combine a score level fusion scheme and a metric space indexing scheme to improve the accuracy and response time in biometric identification, using only scores as information sources. We firstly propose a score level indexing and fusion framework which can be constructed from the following three schemes: (I) a pseudo-score based indexing scheme, (II) a multi-biometric search scheme, and (III) a score level fusion scheme which handles missing scores. A multi-biometric search scheme can be newly obtained by applying a pseudo-score based indexing scheme to multi-biometric identification. We secondly propose the NBS (Naive Bayes search) scheme as a multi-biometric search scheme and discuss its optimality with respect to the retrieval error rate. We evaluated our proposal using the datasets of multiple fingerprints and face scores from multiple matchers. The results showed that our proposal significantly improved the accuracy of the unimodal biometrics while reducing the average number of score computations in both the datasets.

Per-User Unitary Rate Control (PU2RC) performs poorly when the number of users is small and suffers from the sum-rate ceiling effect in the high signal-to-noise ratio (SNR) regime. In this paper, we propose a multimode transmission (MMT) strategy to overcome these inherent shortcomings of PU2RC. In the proposed MMT strategy, the transmitter finds out the optimal transmission mode and schedules users using each user's instantaneous channel quality information (CQI) parameters. First we assume that each user's CQI parameters are perfectly reported in order to introduce the proposed MMT strategy. Then we consider the quantization of CQI parameters using codebooks designed by the Lloyd algorithm. Moreover, we modify the CQI parameters to improve the system's robustness against quantization error. Finally, in order to reduce the quantization error, we design a hierarchical codebook to jointly quantize the modified CQI parameters by considering the correlation between them. Simulation results show that the proposed MMT strategy effectively overcomes the shortcomings of PU2RC and is robust against low quantization level of CQI parameters.

In this letter, we present an efficient video matching-based denoising method. Two main issues are addressed in this paper: the matched points and the denoising algorithm based on an adaptive spatial temporal filter. Unlike previous algorithms, our method adaptively selects reference pixels within spatially and temporally neighboring frames. Our method uses more information about matched pixels on neighboring frames than other methods. Therefore, the proposal enhanced the accuracy of video denoising. Simulation results show that the proposed method produces cleaner and sharper images.

Ultra-wideband pulse radar exhibits high range resolution, and excellent capability in penetrating dielectric media. With that, it has great potential as an innovative non-destructive inspection technique for objects such as human body or concrete walls. For suitability in such applications, we have already proposed an accurate permittivity estimation method for a 2-dimensional dielectric object of arbitrarily shape and clear boundary. In this method, the propagation path estimation inside the dielectric object is calculated, based on the geometrical optics (GO) approximation, where the dielectric boundary points and its normal vectors are directly reproduced by the range point migration (RPM) method. In addition, to compensate for the estimation error incurred using the GO approximation, a waveform compensation scheme employing the finite-difference time domain (FDTD) method was incorporated, where an initial guess of the relative permittivity and dielectric boundary are employed for data regeneration. This study introduces the 3-dimensional extension of the above permittivity estimation method, aimed at practical uses, where only the transmissive data are effectively extracted, based on quantitative criteria that considers the spatial relationship between antenna locations and the dielectric object position. Results from a numerical simulation verify that our proposed method accomplishes accurate permittivity estimations even for 3-dimensional dielectric medium of wavelength size.

Single view distributed video coding (DVC) is a coding method that allows for the computational complexity of the system to be shifted from the encoder to the decoder. This property promotes the use of DVC in systems where processing power or energy use at the encoder is constrained. Examples include wireless devices and surveillance. This paper proposes a multi-hypothesis transform domain single-view DVC system that performs symbol level coding with a non-binary low-density parity-check code. The main contributions of the system relate to the methods used for combining multiple side information hypotheses at the decoder. The system also combines interpolation and extrapolation in the side information creation process to improve the performance of the system over larger group-of-picture sizes.

A method for efficiently estimating the time-varying spectra of nonstationary autoregressive (AR) signals is derived using an indefinite matrix-based sliding window fast linear prediction (ISWFLP). In the linear prediction, the indefinite matrix plays a very important role in sliding an exponentially weighted finite-length window over the prediction error samples. The resulting ISWFLP algorithm successively estimates the time-varying AR parameters of order N at a computational complexity of O(N) per sample. The performance of the AR parameter estimation is superior to the performances of the conventional techniques, including the Yule-Walker, covariance, and Burg methods. Consequently, the ISWFLP-based AR spectral estimation method is able to rapidly track variations in the frequency components with a high resolution and at a low computational cost. The effectiveness of the proposed method is demonstrated by the spectral analysis results of a sinusoidal signal and a speech signal.