This paper proposes a co-channel interference (CCI) suppression scheme employing a frequency-domain nulling filter and turbo equalizer for single-carrier uplink time division multiple access (TDMA) systems. In the proposed scheme, after the received signal is transformed into a frequency-domain signal via fast Fourier transform (FFT), CCI from an adjacent cell is suppressed by the nulling filter. Moreover, the proposed scheme employs a soft canceller and minimum mean square error (SC/MMSE) based turbo equalizer to suppress the performance degradation due to inter-symbol interference (ISI) caused by the nulling filter as well as the ISI induced by fading channel. Computer simulation confirms that the proposed scheme is effective in suppression of CCI compared to the conventional linear frequency-domain equalizer.

A method for flexibly allocating and reallocating optical access network (OAN) resources, including fibers and equipment, using the constraint satisfaction problem (CSP) is described. OAN resource allocation during service delivery provisioning involves various input conditions and allocation sequences, so an OAN resource allocation method has to support various workflow patterns. Furthermore, exception processing, such as reallocating OAN resources once they are allocated, is inevitable, especially during the spread of service using optical fiber and during the deployment of an optical access network. However, it is almost impossible to describe all workflow patterns including exception processes. Improving the efficiency of these exception processes, as well as that of the typical processes, is important for reducing the service delivery time. Describing all these patterns and process flows increases development cost. The CSP can be used to search for solutions without having to fix the process sequence and input conditions beforehand. We have formulated the conditions for OAN resource allocation and reallocation as a CSP. Use of this method makes it possible to handle various allocation workflow patterns including exception processes. Evaluation of the solution search time demonstrated its feasibility.

LDCs system with finite-rate error-free feedback is proposed in this letter. The optimal transmission codeword is selected at the receiver and the codeword index is sent to the transmitter. A simple random search algorithm is introduced for codebook generation. Moreover, the max-min singular value criterion is adopted for codeword selection. Simulation results showed that, with only 3-4 feedback bits, the low-complexity Zero-Forcing receiver can approach the Maximum-Likelihood (ML) performance.

In this paper, a non-data aided minimum mean square error (MMSE) receiver with enhanced multiple access interference (MAI) suppression is proposed for direct-sequence code-division multiple-access (DS-CDMA) systems over a multipath fading channel. The design of the proposed receiver is via the following procedure: First, an adaptive correlator is constructed based on the linearly constrained minimum variance (LCMV) criterion to collect each multipath signal and suppress MAI blindly. A maximum ratio combiner is then utilized to coherently combine the correlator outputs. With a set of judicious chosen weight vectors, effective diversity combining can successfully suppress MAI and the desired signals can be effectively retained. Finally, further performance improvement against the finite data sample effect is achieved using a decision-aided scheme in which the channel response is obtained by the decision data and incorporated with the MMSE method to compute the refined weight vector. Performance analysis based on the output signal-to-interference-plus-noise ratio (SINR) is done to examine the efficacy of the proposed non-data aided MMSE receiver, which can offer the similar results as those of the MMSE receiver with the channel estimation correctly obtained beforehand. Computer simulation results then confirm correctness of the analysis results and demonstrate that the proposed blind receiver can successfully resist MAI as well as the finite data sample effect, and significantly outperform than the conventional blind receivers.

This paper describes a morpheme-based pronunciation model that is especially useful to develop the pronunciation lexicon for Large Vocabulary Continuous Speech Recognition (LVCSR) in Korean. To address pronunciation variation in Korean, we analyze phonological rules based on phonemic contexts together with morphological category and morpheme boundary information. Since the same phoneme sequences can be pronounced in different ways at across morpheme boundary, incorporating morphological environment is required to manipulate pronunciation variation modeling. We implement a rule-based pronunciation variants generator to produce a pronunciation lexicon with context-dependent multiple variants. At the lexical level, we apply an explicit modeling of pronunciation variation to add pronunciation variants at across morphemes as well as within morpheme into the pronunciation lexicon. At the acoustic level, we train the phone models with re-labeled transcriptions through forced alignment using context-dependent pronunciation lexicon. The proposed pronunciation lexicon offers the potential benefit for both training and decoding of a LVCSR system. Subsequently, we perform the speech recognition experiment on read speech task with 34K-morpheme vocabulary. Experiment confirms that improved performance is achieved by pronunciation variation modeling based on morpho-phonological analysis.

The conventional successive adaptive loading algorithm, represented by Hughes-Hartogs algorithm, can be used to reduce the transmit power of orthogonal frequency division multiplexing (OFDM) system. However, two major disadvantages exist for this kind of algorithm: One is the long loading time delay caused by the bit-to-bit loading, i.e., only one bit is loaded in every iteration; the other is that there is no flexibility in freely pre-defining the candidate modulation set before the loading is finished. In order to solve these problems, we propose the low-loading-delay parallel adaptive loading algorithms aiming at reducing the transmit power under the condition that the data throughput and error rate are maintained to target values. Two improvements are achieved by the new algorithm. One is that it divides the successive adaptive loading into several independent small-scale loading (SS-Loading) procedures. "SS-Loading" can be performed in parallel mode. To support this, we propose two subband division methods (successive and sorted subband divisions). The simulation results show that for a large range of subband number (1-128), the loading time delay can be remarkably decreased (especially for the parallel adaptive loading based on sorted subband division, i.e., SRT parallel adaptive loading algorithm) with neglectable power efficiency loss, compared with Hughes-Hartogs algorithm. The second improvement is that the new algorithm allows us to pre-define the candidate modulation set, which provide flexibility for the system design, e.g. we can exclude those rarely used modulation modes. We also reveal that Hughes-Hartogs algorithm is actually a special case of the newly proposed algorithm.

We analytically prove that the error in the channel idle time-based collision probability estimation in face of non-saturated stations is bounded by 2/(CWmin+1) in the IEEE 802.11 wireless LANs (WLANs). This work explicitly quantifies the impact of non-saturation, and the result vindicates the use of the estimation technique in real-life IEEE 802.11 WLANs, in such applications as the acknowledgement-based link adaptation and the throughput optimization through contention window size adaptation.

The objective of this paper is to develop the theoretical foundation to the pilot-assisted channel estimation using delay-time domain windowing for the coherent detection of OFDM signals. The pilot-assisted channel estimation using delay-time domain windowing is jointly used with polynomial interpolation, decision feedback and Wiener filter. A closed-form BER expression is derived. The impacts of the delay-time domain window width, multipath channel decay factor, the maximum Doppler frequency are discussed. The theoretical analysis is confirmed by computer simulation.

Excitation of plasmons on the surface of a metal grating placed in planar or conical mounting is investigated in detail. Most of the results of numerical computations are compared with experimental data. When a TM wave illuminates a metal grating, total or partial absorption of incident light occurs at angles of incidence at which the plasmon surface waves are excited. In planar mounting the absorption is generally strong and nearly total absorption is observed. While in conical mounting, it is not so strong as that in the planar mounting case and a considerable amount of incident power is reflected. This, however, is accompanied by enhanced TM-TE mode conversion and the greater part of the reflected wave is in the TE polarization. The reciprocal of the TM-wave efficiency, hence, is a practical measure in finding the angles of incidence at which the plasmons are excited. Because the angles are sensitive functions of the refractive index of a material over the grating surface, this phenomenon can be used as an index sensor.

Multicast delivery in heterogeneous wireless networks requires careful coordination, in order to take full advantage of the resources such an interworking network environment can offer. Effective coordination, however, may require interworking signaling from coordinating network entities to receivers of a multicast service. Scalable delivery of such signaling is of great importance, since a large number of receivers may be interested in a multicast service. This paper therefore investigates the use of a multicast signaling channel (MSCH) to carry such interworking signaling in a scalable manner. Applications of interworking signaling for multicast service delivery in heterogeneous wireless networks are presented, motivating the need for an MSCH. Then a comparative study is performed analysing potential benefits of employing an MSCH for signaling message delivery compared to conventional unicast signaling. The analysis reveals that the benefits of the MSCH depend mainly on the selection of an appropriate signaling network to carry the MSCH and also on efficient addressing of a subset of receivers within the MSCH. Based on the findings, guidelines for the selection of a suitable signaling network are provided. Furthermore a novel approach is proposed that allows efficient addressing of a subset of receivers within a multicast group. The approach minimizes the required signaling load on the MSCH by reducing the size of the required addressing information. This is achieved by an aggregation of receivers with common context information. To demonstrate the concept, a prototype of the MSCH has been developed and is presented in the paper.

The paper presents a method for testing transport of composite contacts materials under electrical arc conditions at high currents and for polarized electrodes. Tests and the discussion of results were carried out for silver-metal, silver-metal oxide and silver-tungsten carbide contact materials. Additionally, tungsten electrode was used as the second contact which was either cathode or anode. Spectrometric analysis of arc erosion components transported onto the second electrode and into the surroundings was carried out.

Contact resistance is caused by constriction resistance and film resistance through contact layers. It is well known that a surface film causes non-linear voltage and current characteristics. The origin of non-linearity is caused by tunneling electron through thin insulation barrier or jumping over the thick barrier (Shottky barrier) on the contact surface. In this paper, a new idea causing nonlinear property by only current constriction which flows through very small contact spot area, if there is no film layer, is proposed by the two dimensional contact model. The contact model, used in this paper, is a two dimensional type narrow path of contact area (short bridge) made by thin copper foil of 0.035 mm on a glass epoxy resin board. The contact part is made by scraping with an electric drill as a single bridge shape of 0.1 mm wide and 0.3 mm long on the centre of a board (100 mm100 mm). The 3rd harmonic distortion voltage was measured by using a Component Linearity Test Equipment (Type CLT1 made by Radiometer Electronics Company) which the system supplies a pure sine wave current of 10 kHz and detects a distortion voltage of 30 kHz by a narrow band pass filter circuit. The sensitivity of the Component Linearity Test Equipment (CLT1) is under a 10-9 volt. Four bridge samples were examined for the comparison of nonlinear distortion voltage. The distortion voltage of a sample (A) (0.1 mm wide, 0.3 mm long) is too larger than the one of the sample (B) (0.2 mm wide, 0.3 mm long) at the same applied voltage which resistance is not so different each other. It seems that current constriction to the spot (A) may heat up higher and cool down lower than (B). It would be also guessed that the power dissipation of 20 kHz cause temperature oscillation of 20 kHz, then it causes a component of contact resistance of 20 kHz, and therefore the product of 10 kHz current and 20 kHz resistance component cause 30 kHz component distortion voltage.

The paper presents a computer program for the calculation of contact mass loss in the case of evaporation, ablation and melting. It makes use of theoretical mathematical equations previously published by a lot of researchers. For the purposes of the program, an expert system algorithm was designed. The paper presents results obtained by means of the proposed program for silver, tungsten and copper.

We present an effective method of collision recovery for orthogonal frequency division multiplexing (OFDM)-based communications. For the OFDM system, the modulated message data can be demodulated using the partial time-domain OFDM signal. Therefore, the partial time-domain signal can be adopted to reconstruct the whole OFDM time-domain signal with estimated channel information. This property can be utilized to recover packets from the collisions. Since most collisions are cases in which a long packet collides with a short packet, the collided part is assumed to be short. The simulated results show that the method can recover the two collided packets with a certain probability and can be developed to solve the problem of hidden terminals. This method will dramatically benefit the protocol design of wireless networks, including ad hoc and sensor networks.

The large PAPR of orthogonal frequency division multiplexing (OFDM) transmission is one of the serious problems for mobile communications that require severe power saving. Iterative clipping and filtering is an effective method for the PAPR reduction of OFDM signals. This paper evaluates PAPR reduction effect with a graded band-limiting filter in the iterative clipping and filtering method. The evaluation result by computer simulation shows that the excellent peak reduction effect can be obtained in the fewer iteration numbers by using a roll-off filter instead of the conventional rectangular filter, and the iteration number with the roll-off filter achieving the same PAPR is fewer by twice. The result confirms that the clipping and filtering method by using a graded band-limiting filter can achieve low peak OFDM transmission with less computational complexity.

A quadrature demodulator (QDEMOD) for WCDMA direct-conversion receiver using a common-base input stage is reported. A common-base input stage is robust to parasitic elements and is suitable for integrating on-chip matching circuits to realize small and low-cost RF front-end modules. However, a common-mode blocker signal, such as the transmitter (TX) leakage signal, degrades the noise performance due to DC current increase and intermodulation distortion of the TX leakage signal and noise. We propose a QDEMOD with a common-base input stage capable of suppressing the TX leakage signal using symmetrical inductors. The QDEMOD was fabricated using SiGe BiCMOS process with fT of 75 GHz. The measured results show that the NF degradation does not occur until the TX leakage signal input is larger than -10 dBm.

An adaptive tri-threshold dynamic call admission control scheme for wideband mobile cellular networks is proposed. The relationship between the Channel Utilization and the Weighted Handover Dropping Probability versus traffic loadings are investigated. This scheme supports voice, data and multimedia services with differentiated QoS.

The crosstalks between a single-ended line and a differential pair in parallel are analyzed using telegrapher's equations for multi-conductor lines. The crosstalk from the single-ended trace to the differential pair is estimated at shunt-arm resistors in T or Π termination networks. The analysis is conducted by incorporating the termination conditions with the solution of the telegrapher's equations. The time-domain characteristics of the crosstalk are obtained by using the fast inverse Laplace transform. The measurements are conducted easily by using a single-ended digital oscilloscope since the crosstalk is evaluated on the shunt-arm resistors. Both the calculated and measured results are presented, and the characteristics of the crosstalk are also investigated qualitatively.

This paper discusses the resistive termination of on-chip high-performance interconnects. Resistive termination is effective to improve the bandwidth of on-chip interconnects, on the other hands, increases the power dissipation and the area. Therefore trade-off analysis about resistive termination is necessary. This paper proposes a method to determine the termination of on-chip interconnects. The termination derived by the proposed method provides minimum sensitivity to process variation as well as maximum eye-opening in voltage.

Soft-decision decoding techniques are applied to asynchronous frequency-hop/spread-spectrum multiple-access (FH/SSMA) networks, where M-ary frequency shift keying (MFSK) is employed to transmit one modulated symbol per hop. Coding schemes using soft-decision decoded binary convolutional codes or turbo codes are considered, both with or without bit-interleaving. Performances of several soft metrics are examined for each coding scheme. It is shown that when multiple access interference is the main source of errors, the product metric offers the best performance among the soft metrics considered for all coding schemes. Furthermore, the application of soft-decision decoded convolutional codes or turbo codes without bit-interleaving is shown to allow for a much larger number of simultaneously transmitting users than hard-decision decoded Reed-Solomon codes. Finally, it is observed that when soft-decision decoding techniques are employed, synchronous networks attain better performance than asynchronous networks.