Ryutaro OHMOTO Hiroyuki OHTSUKA
This paper presents a potential FM double modulation technique for subcarrier optical transmission in order to improve the input dynamic range. The proposed theory of FM double modulation is presented. The BER performance and input dynamic range are shown theoretically and experimentally compared with conventional direct intensity modulation. It was found that the dynamic range could be experimentally improved by 20dB compared with the conventional method by using FM double modulation. The proposed technique achieved an input dynamic range of 60 dB even when using a commercial Fabri-Perot LD.
This paper tends to analyze the trends of the research in logic synthesis. The first part is devoted to an expertise of the efficiency of factorization methods developed during the last decade and to the proposal of dedicated methods for complex logic blocks. The second part shows the importance of Binary Decision Diagrams as representation of Boolean functions. Their use in the technology mapping phase of multiplexor-based FPGAs in an industrial tool is taken as illustration.
A quantum interconnection scheme by controlling the Coulomb interaction between ballistic electrons is proposed in which 2DEG (2 dimensional electron gas) plays the role of an interconnection medium. This concept brings up new possibilities for the interconnection approach in various fields such as parallel processing, telecommunications switching, and quantum functional devices. Cross-over interconnection, address collision, and address selection in a quantum information network system were analyzed as the first step. The obtained results have shown that the interconnection probability can be controlled by the velocity and timing of the ballistic electron emission from the emitter electrode. The proposed interconnection scheme is expected to open up a new field of quantum effect integrated circuits in the 21st century.
In this paper, we investigate various technology aspects in fiber-to-the-microcell systems. Background studies on radio propagation environment and system operations are provided first. The fundamental linearity characteristics of a directly and externally modulated optical links are analyzed next. An overall comparison between the two types of optical links, and system requirements among all types of wireless systems (from macrocells to picocells) are presented. Future research and development directions are also suggested.
In this study, an expression of the regression relationship with less information loss is concretely derived in the form suitable to the existence of amplitude constraint of the observed data and the prediction of response probability distribution. The effectiveness of the proposed method is confirmed experimentally by applying it to the actual acoustic data.
Makoto SHIBUTANI Wataru DOMON Katsumi EMURA
This paper reports performance improvement in an optical fiber feeder for microcellular mobile radio systems. A low noise optical receiver using a transformer resonant circuit is described. With this receiver, CNR degradation due to receiver noise is suppressed to less than 0.9dB. Furthermore, two novel techniques, the use of a multiple-LD transmitter and automatic LD input level control, are proposed. The multiple-LD transmitter increases transmitter output power and reduces the transmitter noise. With a dual-LD transmitter, it is possible to increase the optical loss margin by 3.1dB, which corresponds to transmission length expansion of 6.2km, or to improve the received CNR by 2.8dB, which enables communication range expansion. Automatic LD input level control, which optimizes LD input level according to the received radio power, can expand the actual dynamic range of the up link.
Junghyun HWANG Yoshiteru OOI Shinji OZAWA
This paper describes an adaptive sensing system with tracking and zooming a moving object in the stable environment. Both the close contour matching technique and the effective determination of zoom ratio by fuzzy control are proposed for achieving the sensing system. First, the estimation of object feature parameters, 2-dimensional velocity and size, is based on close contour matching. The correspondence problem is solved with cross-correlation in projections extracted from object contours in the specialized difference images. In the stable environment, these contours matching, capable of eliminating occluded contours or random noises as well as background, works well without heavy-cost optical flow calculation. Next, in order to zoom the tracked object in accordance with the state of its shape or movement practically, fuzzy control is approached first. Three sets of input membership function--the confidence of object shape, the variance of object velocity, and the object size--are evaluated with the simplified implementation. The optimal focal length is achieved of not only desired size but safe tracking in combination with fuzzy rule matrix constituted of membership functions. Experimental results show that the proposed system is robust and valid for numerous kind of moving object in real scene with system period 1.85 sec.
A. Roger HAMMONS, Jr. P. Vijay KUMAR
Recently, a family of 4-phase sequences (alphabet {1,j,-1,-j}) was discovered having the same size 2r+1 and period 2r-1 as the family of binary (i.e., {+1, -1}) Gold sequences, but whose maximum nontrivial correlation is smaller by a factor of 2. In addition, the worst-case correlation magnitude remains the same for r odd or even, unlike in the case of Gold sequences. The family is asymptotically optimal with respect to the Welch lower bound on Cmax for complex-valued sequences and the sequences within the family are easily generated using shift registers. This paper aims to provide a more accessible description of these sequences.
Toshiyuki YOSHIDA Akinori NISHIHARA Nobuo FUJII
In multidimensional signal sampling, the orthogonal sampling scheme is the simplest one and is employed in various applications, while a non-orthogonal sampling scheme is its alternative candidate. The latter sampling scheme is used mainly in application where the reduction of the sampling rate is important. In three-dimensional (3-D) signal processing, there are two typical sampling schemes which belong to the non-orthogonal samplings; one is face-centered cubic sampling (FCCS) and the other is body-centered cubic sampling (BCCS). This paper proposes a new design method for 3-D band-limiting FIR filters required for such non-orthogonal sampling schemes. The proposed method employs the McClellan transformation technique. Unlike the usual 3-D McClellan transformation, however, the proposed design method uses 2-D prototype filters and 2-D transformation filters to obtain 3-D FIR filters. First, 3-D general sampling theory is discussed and the two types of typical non-orthogonal sampling schemes, FCCS and BCCS, are explained. Then, the proposed design method of 3-D bandlimiting filters for these sampling schemes is explained and an effective implementation of the designed filters is discussed briefly. Finally, design examples are given and the proposed method is compared with other method to show the effectiveness of our methos.
In this paper, we propose a spread spectrum pulse position modulation (SS-PPM) system, and describe its basic performances. In direct sequence spread spectrum (DS/SS) systems, pseudo-noise (PN) matched filters are often used as information demodulation devices. In the PN matched filter demodulation systems, for simple structure and low cost of each receiver, it is desired that each demodulator uses only one PN matched filter, and that signals transmitted from each transmitter are binary. In such systems, on-off keying (SS-OOK), binary-phase-shift keying (SS-BPSK) and differential phase-shift keying (SS-DPSK) have been conventionally used. As one of such systems, we propose the SS-PPM system; the SS-PPM system is divided into the following two systems: 1) the SS-PPM system without sequence inversion keying (SIK) of the spreading code (Without SIK for short); 2) the SS-PPM system with SIK of the spreading code (With SIK for short). As a result, we show that under the same bandwidth and the same code length, the data transmission rate of the SS-PPM system is superior to that of the other conventional SS systems, and that under the same band-width, the same code length and the same data transmission rate, the SS-PPM system is superior to the other conventional SS systems on the following points: 1) Single channel bit error rate (BER) (BER characteristics of the SS-PPM system improve with increasing the number of chip slots of the SS-PPM system, and as the number of chip slots increases, it approaches Shannon's limit); 2) Asynchronous CDMA BER; 3) Frequency utilization efficiency. In addition, we also show that With SIK is superior to Without SIK on these points.
Riaz ESMAILZADEH Masao NAKAGAWA
A time division duplex (TDD) direct sequence spread spectrum communication (DS-SS) system is proposed for operation in channels with Rayleigh fading characteristics. It is shown that using the TDD method is advantageous because the devices can be designed more simply, the method is more frequency efficient and as a result the systems will be less costly and less power consuming. It is also shown that an efficient power control method can be implemented for the TDD systems. In contrast to the traditional access techniques such as frequency division multiple access (FDMA) and time division multiple access (TDMA) that are mainly frequency limited, the code division multiple access (CDMA) method which uses the DS-SS technique is interference limited. This means that an efficient power control method can increase the capacity of the DS-SS communications system. Computer simulations are used to evaluate the performance of the TDD power control method. Performance improvement of order of 12 to 17dB at bit error rate (BER) of 10-3 can be obtained for different methods of power control. The advantages of the TDD technique for the future DS-SS systems operating in the Industrial, Scientific and Medical (ISM) band are explained in an appendix to this paper.
It is concluded from numerical examples for the well-known linear PN sequence families of a large range of periods that the mean-square cross-correlation value between sequences is the dominating parameter to the average signal-to-noise power ratio performance of an asynchronous direct-sequence (DS) code-division multiple-access (CDMA) system. The performance parameters derived by Pursley and Sarwate are used for numerical evaluation and the validity of conclusion is supported by reviewing the other related works. The mean-square periodic cross-correlation takes the equal value p (code period) for the known CDMA code families. The equal mean-square cross-correlation performance results from the basic results of coding theory.
Riaz ESMAILZADEH Masao NAKAGAWA
A new method of multipath diversity combination is proposed for Direct Sequence Spread Spectrum (DS-SS) mobile communications. In this method, the transmitted signal from the base staion is the sum of a number of the same spread signal, each one delayed and scaled according to the delay and the strength of the multipaths of the transmission channel. As a result the received signal at the mobile unit will already be a Rake combination of the multipath signals. This new method is called Pre-Rake diversity combination because the Rake diversity combination process is performed before transmission By this method the size and complexity of the mobile unit can be minimized, and the unit is made as simple as a non-combining single path receiver. A theoretical examination of the Signal to Noise Ratio (SNR) and the Bit Error Rate (BER) results for the traditional Rake and the Pre-Rake combiners as well as computer simulations show that the performance of the Pre-Rake combiner is equivalent to that of the Rake combiner.
Teruyuki MIYAJIMA Takaaki HASEGAWA Misao HANEISHI
In this paper we consider multiuser detection using a neural network in a synchronous code-division multiple-access channel. In a code-division multiple-access channel, a matched filter is widely used as a receiver. However, when the relative powers of the interfering signals are large, i.e. the near-far problem, the performances of the matched filter receiver degrade. Although the optimum receiver for multiuser detection is superior to the matched filter receiver in such situations, the optimum receiver is too complex to be implemented. A simple technique to implement the optimum multiuser detection is required. Recurrent neural networks which consist of a number of simple processing units can rapidly provide a collectively-computed solution. Moreover, the network can seek out a minimum in the energy function. On the other hand, the optimum multiuser detection in a synchronous channel is carried out by the maximization of a likelihood function. In this paper, it is shown that the energy function of the neural network is identical to the likelihood function of the optimum multiuser detection and the neural network can be used to implement the optimum multiuser detection. Performance comparisons among the optimum receiver, the matched filter one and the neural network one are carried out by computer simulations. It is shown that the neural network receiver has a capability to achieve near-optimum performance in several situations and local minimum problems are few serious.
Ramjee PRASAD Michel G. JANSEN Adriaan KEGEL
The capacity of a cellular direct sequence code division multiple access system is investigated in situations with and without power control for both the reverse link (from mobile to base station) and the forward link (from base station to mobile). The capacity is defined as the number of simultaneous users per cell with a prespecified performance. A theoretical analysis of the effect of imperfect power control on the reverse link capacity is presented using an analytical model. To investigate the reverse link capacity without any form of power control, a general spatial user distribution is developed which is very suitable for analytical study of any multiple access system with the near-far effect problem. The performance of the reverse link of a CDMA system is also evaluated considering the users located in surrounding cells. Finally, the forward link capacity is studied considering multiple cells. Two possible forward power control schemes, namely carrier-to-interference ratio driven and distance driven systems, are discussed.
Masashi HOTTA Masahiro GESHIRO Katsuaki KANOH Haruo KANETAKE
Power transmission properties are investigated for a butt-joint which contains an air gap between an isotropic planar waveguide and an anisotropic one whose optical axis is lying in the plane defined by the propagation axis and the normal of the waveguide surface. New transmission coefficients are introduced for estimating the optical-power which is launched out into the gap from the incoming waveguide. Wave propagation through the gap is analyzed on the basis of the BPM concept. And the power transmitted across the interface between the gap and the outgoing waveguide is evaluated by means of the overlap integral of the field profiles. The effects of the air gap and the refractive index of filling liquid as well as axial displacement and angular misalignment are discussed on the basis of numerical results.
Dong Su SEONG Ho Sung KIM Kyu Ho PARK
In this paper, we define an attributed random graph, which can be considered as a generalization of conventional ones, to include multiple attributes as well as numeric attribute instead of a single nominal attribute in random vertices and edges. Then we derive the probability equations for an attributed graph to be an outcome graph of the attributed random graph, and the equations for the entropy calculation of the attributed random graph. Finally, we propose the application areas to computer vision and machine learning using these concepts.
Seungjik LEE Jaeho SHIN Seiichi NOGUCHI
In this letter, we study on the sensitivity to the electrical stimulus pulse for biomedical electronics for the purpose to make a tactile vision substitution system for binds. We derive the equivalent circuit of finger by measuring sensitive voltages with various touch condition and various DC voltage. And we consider to the sensitivity of finger against electrical stimulus pulse. In order to convert the sense of sight to tactile sense, we consider four types of touch condition and various types of pulse. It is shown that the sensitivity of finger to electrical stimulus pulse is determined by duty-ratio, frequency, hight of pulse and the type of touch condition. In the case that duty-ratio is about 20%, frequency is within about 60-300Hz and touch condition is A-4 type, the sensitive voltage becomes the lowest. With this result, a tactile vision substitution system can be developed and the system will be used to transfer various infomations to blinds without paper.
Shogo MURAMATSU Hitoshi KIYA Masahiko SAGAWA
It is known that the resolution conversion based on orthogonal transform has a problem that is difference of luminance between the converted image and the original. In this paper, the scale factor of the system employing various orthogonal transforms is generally formulated by considering the DC gain, and the condition of alias free for DC component is indicated. If the condition is satisfied, then the scale factor is determined by only the basis functions.
Three dimensional (3-D) optics offers potential advantages to the massively-parallel systems over electronics from the view point of information transfer. The purpose of this paper is to survey some aspects of the 3-D optical interconnection technology for the future massively-parallel computing systems. At first, the state-of-art of the current optoelectronic array devices to build the interconnection networks are described, with emphasis on those based on the semiconductor technology. Next, the principles, basic architectures, several examples of the 3-D optical interconnection systems in neural networks and multiprocessor systems are described. Finally, the issues that are needed to be solved for putting such technology into practical use are summarized.