In this paper, we propose a control method for the synchronization of chaotic systems that does not require the systems to be connected, unlike existing methods such as that proposed by Pecora and Carroll in 1990. The method is based on the reinforcement learning algorithm. We apply our method to two discrete-time chaotic systems with mismatched parameters and achieve M step delay synchronization. Moreover, we extend the proposed method to the synchronization of continuous-time chaotic systems.

In this study, a performance isolation mechanism based on a fuzzy control technique is developed in such a way that ambiguous situations caused when estimating the workload of cluster-based web servers, client request rates, and dynamic request rates can be represented effectively. The proposed mechanism involving a fuzzy-based technique is compared with a non-fuzzy technique in terms of the response time in the 95th percentile. Experiments showed that the proposed technique improves the performance of web servers that provide differentiated services.

Privacy preserving is indispensable in data mining. In this paper, we present a novel clustering method for distributed multi-party data sets using orthogonal transformation and data randomization techniques. Our method can not only protect privacy in face of collusion, but also achieve a higher level of accuracy compared to the existing methods.

Radiation of a Hertzian dipole placed within a cylindrical cavity with narrow slots is investigated. Narrow axial and transverse slots are considered. Scattered fields are expanded in terms of eigenfunctions and boundary conditions are enforced to obtain a set of simultaneous equations. Computations are performed to check the validity of the formulation.

DVC based video codecs proposed in the literature generally include a reverse (feedback) channel between the encoder and the decoder. This channel is used to communicate the dynamic parity bit request messages from the decoder to the encoder resulting in an optimum dynamic variable rate control implementation. However it is observed that this dynamic feedback mechanism is a practical hindrance in a number of practical consumer electronics applications. In this paper we proposed a novel transform domain Unidirectional Distributed Video Codec (UDVC) without a feedback channel. First, all Wyner-Ziv frames are divided into rectangular macroblocks. A simple metric is used for each block to represent the correlations between the corresponding blocks in the adjacent key frame and the Wyner-Ziv frame. Based on the value of this metric, parity is allocated dynamically for each block. These parities are either stored for offline processing or transmitted to the DVC decoder for on line processing. Simulation results show that the proposed codec outperforms the existing UDVC solutions by a significant margin.

In this letter, a new joint precoding and decoding design scheme for multiuser MIMO downlink is proposed which dispenses with iterative operations and can achieve better performance. This scheme introduces zero-force processing into minimum mean square error (MMSE) design scheme to avoid iterative operations. We derived closed-form precoders and decoders and transmit power allocation strategy of proposed design scheme, validated performance of proposed design scheme by computer simulation. The simulation results show that the proposed design scheme can achieve better bit error rate (BER) and sum capacity performance compared to an existing non-iterative design scheme.

An effective operation mode and a space-time synchronization technique for the spaceborne/airborne hybrid bistatic synthetic aperture radar (SA-BSAR) using sources of opportunity are presented. Our motivation lies in the fact that the existing approaches in the literature, where the transmitter antenna must be steered, can only be used in the hybrid bistatic SAR systems with cooperative transmitter. The presented mode is to widen the receiving beam for the purpose to increase the scene extension in azimuth. The inspiration comes from the much shorter receiving distance as compared to the one in mono-static spaceborne SAR. This means that the receiving gain can be significantly reduced to provide the same signal-to-noise ratio (SNR) with respect to the mono-static case. The feasibility of the wide-beam mode is first preliminarily verified by a quantitative analysis of SNR and a demonstration that the pulse repetition frequency (PRF) used in the spaceborne illuminator can easily satisfy the PRF constraints of the SA-BSAR. The influence on the azimuth ambiguity to signal ratio (AASR) is also discussed and the corresponding broadening factor of the maximum allowable for receiver beamwidth is subsequently derived. Afterwards, the formulae for calculating the overlap time, the scene extension and the azimuth resolution are deduced. As there are no grating lobes in satellite antenna pattern since the non-cooperative illuminator normally operates in the side-looking mode, an existing technique for the space-time synchronization in cooperative hybrid systems can not be directly applied. The modification performed and its underlying principle are presented in detail. The simulation results demonstrate the effectiveness of the wide-beam mode, and show that in most cases a useful scene extension (on the order of at least 1 km) can be achieved with a roughly equivalent azimuth resolution as compared to the one in mono-static spaceborne SAR. In some cases, explicit measures to suppress the azimuth ambiguity must be taken to achieve the expected scene extension.

The regular 2-D mesh topology has been utilized for most of Network-on-Chips (NoCs) on FPGAs. Spatially biased traffic generated in some applications makes a customization method for removing links more efficient, since some links become low utilization. In this paper, a link removal strategy that customizes the router in NoC is proposed for reconfigurable systems in order to minimize the required hardware amount. Based on the pre-analyzed traffic information, links on which the communication amount is small are removed to reduce the hardware cost while maintaining adequate performance. Two policies are proposed to avoid deadlocks and they outperform up*/down* routing, which is a representative deadlock-free routing on irregular topology. In the case of the image recognition application susan, the proposed method can save 30% of the hardware amount without performance degradation.

In static wireless ad hoc networks such as wireless mesh networks and wireless sensor networks, multipath routing techniques are very useful for improving end-to-end delay, throughput, and load balancing, as compared to single-path routing techniques. When determining multiple paths, however, multipath routing protocols should address the well-known route coupling problem that results from a geographic proximity of adjacent routes and that hampers performance gain. Although a lot of multipath routing protocols have been proposed, most of them focused on obtaining node or link-disjoint multipaths. In order to address the route coupling problem, some multipath routing protocols utilizing zone-disjointness property were proposed. However, they suffer from an overhead of control traffic or require additional equipment such as directional antenna. This paper therefore proposes a novel multipath routing protocol, based on geographical information with low overhead, called 3-directional zone-disjoint multipath routing protocol (3DMRP). 3DMRP searches up to three zone-disjoint paths by using two techniques: 1) greedy forwarding, and 2) RREP-overhearing. One primary and two secondary paths are obtained via greedy forwarding in order to reduce control overhead, and these secondary paths are found by avoiding the RREP overhearing zone created during the primary path acquisition. In particular, two versions of 3DMRP are introduced in order to avoid the RREQ-overhearing zone. Through ns-2 simulations, 3DMRP is evaluated to verify that it achieves performance improvements in terms of throughput and control overhead.

This primary objective of this study is to demonstrate simulation and ground-based experiment for the attitude control of flexible spacecraft. A typical spacecraft structure consists of the rigid body and flexible appendages which are large flexible solar panels, parabolic antennas built from light materials in order to reduce their weight. Therefore the attitude control has a big problem because these appendages induce structural vibration under the excitation of external forces. A single-axis rotational simulator with a flexible arm is constructed with on-off air thrusters and reaction wheel as actuation. The simulator is also equipped with payload pointing capability by simultaneous thruster and DC servo motor actuation. The experiment of flexible spacecraft attitude control is performed using only the reaction wheel. Using the reaction wheel the performance of the fuzzy-PID controller is illustrated by simulation and experimental results for a single-axis rotational simulator.

The proposed quasi-resonant (QR) zero current switching (ZCS) switched-capacitor (SC) converter is a new type of bidirectional power flow control conversion scheme. The proposed converter is able to provide voltage conversion ratios from -3/- (triple-mode/ trisection-mode) to -n/- (-n-mode/--mode) by adding a different number of switched-capacitors and power MOSFET switches with a small series connected resonant inductor for forward and reverse power flow control schemes. It possesses the advantages of low switching losses and current stress in this QR ZCS SC converter. The principle of operation, theoretical analysis of the proposed triple-mode/ trisection-mode bidirectional power conversion scheme is described in detail with circuit model analysis. Simulation and experimental studies are carried out to verify the performance of the proposed inverting type ZCS SC QR bidirectional converter. The proposed converters can be applied to battery equalization for battery management system (BMS).

A state-discretization approach [11], which was introduced for stability of constant delayed systems, will be extended to time-varying delayed systems. The states not only in constructing the Lyapunov-Krasovskii functional but also in designing the integral inequality technique [12] will be discretized. Based on the discretized-state, [9],[17] 's piecewise analysis method will be applied to confirm the system stability in whole delay bound. Numerical examples show that the results obtained by this criterion improve the allowable delay bounds over the existing results in the literature.

The optimization of nonlinear feedback fuzzy system using the product-sum-gravity method is described in this paper. The fuzzy control discussed here is the nonlinear feedback control in which the feedback laws are determined by IF-THEN type fuzzy production rules through product-sum-gravity method. To prove existence of optimal control, we applied compactness of a set of membership functions in L2 space and continuity of the approximate reasoning, and prepared some propositions concerning product-sum-gravity method. By considering fuzzy optimal control problems as problems of finding the minimum (maximum) value of the integral cost (benefit) function on an appropriate set of membership functions, the existence of fuzzy optimal control is shown.

A time synchronization protocol for WSN is required to compensate time discrepancy. Time discrepancy among sensor nodes inevitably happens in WSN due to several internal and external factors. In order to make WSN's own job done effectively, a time synchronization protocol should be designed to achieve low execution time and low network traffic as well as accurate synchronization. Several synchronization protocols have been proposed to provide accurate time synchronization but do not consider execution time and network traffic for time synchronization. This paper proposes MNTP; it provides rapid and accurate time synchronization in multi-hop communication range. It presents a new broadcast scheme and time stamping mechanism to achieve low execution time and low network traffic along with accurate synchronization. Evaluation results show that MNTP improves synchronization accuracy up to 22% in single-hop and 51% in multi-hop respectively. MNTP also has 67 times and 58 times lower execution time and network traffic when 300 nodes are deployed in 2020 m2 sensor field.

The use of cross-polarized antennas for multiple-input multiple-output (MIMO) systems is receiving attention as they are able to double the number of antenna for half antenna spacing needs. This paper presents the channel correlation property of the 3rd Generation Partner Project (3GPP)/3GPP2 spatial channel model (SCM) with the polarization propagation. The statistical average of the per path polarization correlation given random cross-polarization discrimination (XPD) with co-located ideal tilted dipole antennas is derived. The impact on the random behavior of the polarization correlation due to the slant offset angle, the per path angular spread (AS), and the random XPD is analyzed. The simulation results show that the variation of polarization correlation caused by the random XPD is maximized with a 58 slant offset angle under the assumptions of all predefined scenarios in SCM. The per path AS has minor impact on the statistics of the polarization correlations. The randomness of polarization correlation is negligible for an XPD with small standard deviation.

For variation-aware capacitance extraction, stochastic collocation method (SCM) based on Homogeneous Chaos expansion has the exponential convergence rate for Gaussian geometric variations, and is considered as the optimal solution using a quadratic model to model the parasitic capacitances. However, when geometric variations are measured from the real test chip, they are not necessarily Gaussian, which will significantly compromise the exponential convergence property of SCM. In order to pursue the exponential convergence, in this paper, a generalized stochastic collocation method (gSCM) based on generalized Polynomial Chaos (gPC) expansion and generalized Sparse Grid quadrature is proposed for variation-aware capacitance extraction that further considers the arbitrary random probability of real geometric variations. Additionally, a recycling technique based on Minimum Spanning Tree (MST) structure is proposed to reduce the computation cost at each collocation point, for not only "recycling" the initial value, but also "recycling" the preconditioning matrix. The exponential convergence of the proposed gSCM is clearly shown in the numerical results for the geometric variations with arbitrary random probability.

Cooperative transmission is an efficient approach to improve the performance of wireless communications over fading channels without the need for physical co-located antenna arrays. In this paper, we propose a novel cooperative protocol with selective decode-and-forward relays and generalized selection combining (GSC) technique at destination. The advantage of this scheme is that it not only allows us to optimize the structure of destination but also to fully exploit the diversity offered by the channels with an appropriate number of chosen strongest paths. For an arbitrary number of relays, an exact and closed-form expression of the Symbol Error Rate (SER) is derived for M-ary PSK in independent but not identically distributed Rayleigh fading channels. Various simulations are performed and their results exactly match the results of analyses.

H.264 is the latest HDTV video compression standard, which provides a significant improvement in coding efficiency at the cost of huge computation complexity. After transform and quantization, if all the coefficients of the block's residue data are zero, this block is called all-zero block (AZB). Provided that an AZB can be detected early, the process of transform and quantization on an AZB can be skipped, which reduces significant redundant computations. In this paper, a theoretical analysis is performed for the sufficient condition for AZB detection. As a result, a partial sum of absolute difference (SAD) based 44 AZB detection algorithm is derived. And then, a hardware-oriented AZB detection algorithm is proposed by modifying the order of SAD calculation. Furthermore, a quantization parameter (QP) oriented 88 AZB detection algorithm is proposed according to the AZB's statistical analysis. Experimental results show that the proposed algorithm outperforms the previous methods in all cases and achieves major improvement of computation reduction in the range from 6.7% to 42.3% for 44 blocks, from 0.24% to 79.48% for 88 blocks. The computation reduction increases as QP increases.

As we scale toward nanometer technologies, the increase in interconnect parameter variations will bring significant performance variability. New design methodologies will emerge to facilitate construction of reliable systems from unreliable nanometer scale components. Such methodologies require new performance models which accurately capture the manufacturing realities. In this paper, we present a Linear Fractional Transform (LFT) based model for interconnect parametric uncertainty. The new model formulates the interconnect parametric uncertainty as a repeated scalar uncertainty structure. With the help of generalized Balanced Truncation Realization (BTR) and Linear Matrix Inequalities (LMI's), the porposed model reduces the order of the original interconnect network while preserves the stability. The LFT based new model even guarantees passivity if the BTR reduction is based on solutions to a pair of Linear Matrix Inequalities (LMI's) generated from Lur'e equations. In case of large number of uncertain parameters, the new model may be applied successively: the uncertain parameters are partitioned into groups, and with regard to each group, LFT based model is applied in turns.

Sensor networks have promising applications such as battlefield surveillance, biological detection, and emergency navigation, etc. Crucial problems in sensor networks are energy-efficiency and collision avoidance in wireless communication. To deal with the problems, we consider a self-stabilizing solution to the construction of k disjoint sense-sleep trees, where range adjustment and the use of GPS are allowed. Each root is determined by its identifier and is distinguished by its color, the identification of a tree. Using a dominating k-partition rule, each non-root node first determines a color irrelevant to the root. Then, the non-root node determines a parent node that is equally colored with minimal distance. If there is no appropriate parent, the range is extended or shrunk until the nearest parent is determined. Finally, we perform a simulation.