The maximization of non-Gaussianity is an effective approach to achieve the complex independent component analysis (ICA) problem. However, the traditional complex maximization of non-Gaussianity (CMN) algorithm does not consider the influence of noise. In this letter, a modification of the fixed-point algorithm is proposed for more practical occasions of the complex noisy ICA model. Simulations show that the proposed method demonstrates significantly improved performance over the traditional CMN algorithm in the noisy ICA model when the sample size is sufficient.

N-Shift Regional Low Correlation (NS-RLC) sequences have the low values of the correlation function only in N-shift positions. Especially, N-Shift Regional Zero Correlation (NS-RZC) sequences have the zero values in N-shift positions. In this letter, the generation algorithm of N-shift RLC/RZC sequences derived from Three Low Correlation Zones (T-LCZ) sequence set and Three Zero Correlation Zones (T-ZCZ) sequence set is proposed. In order to highlight the relationship between these sequences, the corresponding theoretical bound is calculated and analyzed.

This paper presents a framework for reducing the energy consumption of embedded real-time systems. We implemented the presented framework as both an optimization toolchain and an energy-aware real-time operating system. The framework consists of the integration of multiple techniques to optimize the energy consumption. The main idea behind our approach is to utilize trade-offs between the energy consumption and the performance of different processor configurations during task checkpoints, and to maintain memory allocation during task context switches. In our framework, a target application is statically analyzed at both intra-task and inter-task levels. Based on these analyzed results, runtime optimization is performed in response to the behavior of the application. A case study shows that our toolchain and real-time operating systems have achieved energy reduction while satisfying the real-time performance. The toolchain has also been successfully applied to a practical application.

This article introduces a self-organizing model which builds the topology of a DHT mapping system for ICN. Due to its self-organizing operation and low average degree of maintenance, the management overhead of the system is reduced dramatically, which yields inherent scalability. The proposed model can improve latency by around 10% compared to an existing approach which has a near optimal average distance when the number of nodes and degree are given. In particular, its operation is simple which eases maintenance concerns. Moreover, we analyze the model theoretically to provide a deeper understanding of the proposal.

The energy consumption of the Internet has a huge impact on the world economy and it is likely to increase every year. In present backbone networks, pairs of nodes are connected by “bundles” of multiple physical cables that form one logical link and energy saving can be achieved by shutting down unused network resources. The hose model can support traffic demand variations among node pairs in different time periods because it accommodates multiple traffic matrices unlike the pipe model which supports only one traffic matrix. This paper proposes an OSPF (Open Shortest Path First) link weight optimization scheme to reduce the network resources used for the hose model considering single link failures. The proposed scheme employs a heuristic algorithm based on simulated annealing to determine a suitable set of link weights to reduce the worst-case total network resources used, and considering any single link failure preemptively. It efficiently selects the worst-case performance link-failure topology and searches for a link weight set that reduces the worst-case total network resources used. Numerical results show that the proposed scheme is more effective in the reduction of worst-case total network resources used than the conventional schemes, Start-time Optimization and minimum hop routing.

The physical optics (PO) approximation is one of the widely-used techniques to calculate scattering fields with a reasonable accuracy in the high frequency region. The computational load of PO radiation integral dramatically increases at higher frequencies since it is proportional to the electrical size of scatterer. In order to suppress this load, a variety of techniques, such as the asymptotic evaluation by the stationary phase method (SP), the equivalent edge currents (EECs), the low-order polynomial expansion method and the fast physical optics (FPO), have been proposed and developed. The adaptive sampling method (ASM) proposed by Burkholder is also one of the techniques where the sampling points in radiation integral should be adaptively determined based upon the phase change of integrand. We proposed a quite different approach named ``Localization of the radiation integrals.'' This localization method suggests that only the small portions of the integration with a slow phase change contribute to the scattering field. In this paper, we newly introduce the ASM in the localization method and applied the proposed method into the radar cross section (RCS) analysis of 2-dimensional strip and cylinder. We have confirmed that the proposed method provides the frequency-independent number of division in the radiation integrals and computational time and accuracy. As the starting point for extension to 3-D case, the application of the proposed method for a reflection from an infinite PEC plane and a part of sphere was also examined.

As one of the most widely investigated studies in wireless sensor networks (WSNs), multihop networking is increasingly developed and applied for achieving energy efficient communications and enhancing transmission reliability. To accurately and realistically analyze the performance metric (energy efficiency), firstly we provide a measurement of the energy dissipation for each state and establish a practical energy consumption model for a WSN. According to the analytical model of connectivity, Gaussian approximation approaches to experimental connection probability are expressed for optimization problem on energy efficiency. Moreover, for integrating experimental results with theories, we propose the methodology in multihop wireless sensor networks to maximize efficiency by nonlinear programming, considering energy consumptions and the total quantity of sensing data to base station. Furthermore, we present evaluations adapting to various wireless sensor networks quantitatively with respect to energy efficiency and network configuration, in view of connectivity, the length of data, maximum number of hops and total number of nodes. As the consequence, the realistic analysis can be used in practical applications, especially on self-organization sensor networks. The analysis also shows correlations between the efficiency and maximum number of hops, that is the multihop systems with several hops can accommodate enough devices in ordinary applications. In this paper, our contribution distinguished from others is that our model and analysis are extended from experiments. Therefore, the results of analysis and proposal can be conveniently applied to actual networks.

This paper shows a method to find a linear transformation that reduces the number of variables to represent a given incompletely specified index generation function. It first generates the difference matrix, and then finds a minimal set of variables using a covering table. Linear transformations are used to modify the covering table to produce a smaller solution. Reduction of the difference matrix is also considered.

We propose a synthesis method of nested loops into parallelized circuits by integrating the polyhedral optimization, which is a state-of-the-art technique in the field of software, into high-level synthesis. Our method constructs circuits equipped with multiple processing elements (PEs), using information generated by the polyhedral optimizing compiler. Since multiple PEs cannot concurrently access the off-chip RAM, a method for constructing on-chip buffers is also proposed. Our buffering method reduces the off-chip RAM access conflicts and further enables burst accesses and data reuses. In our experimental result, the buffered circuits generated by our method are 8.2 times on average and 26.5 times at maximum faster than the sequential non-buffered ones, when each of the parallelized circuits is configured with eight PEs.

In this paper, a novel high-performance heuristic algorithm, named relay-race algorithm (RRA), which was proposed to approach a global optimal solution by exploring similar local optimal solutions more efficiently within shorter runtime for NP-hard problem is investigated. RRA includes three basic parts: rough search, focusing search and relay. The rough search is designed to get over small hills on the solution space and to approach a local optimal solution as fast as possible. The focusing search is designed to reach the local optimal solution as close as possible. The relay is to escape from the local optimal solution in only one step and to maintain search continuity simultaneously. As one of typical applications, multi-objective placement problem in physical design optimization is solved by the proposed RRA. In experiments, it is confirmed that the computational performance is considerably improved. RRA achieves overall Pareto improvement of two conflicting objectives: power consumption and maximal delay. RRA has its potential applications to improve the existing search methods for more hard problems.

In this paper, an image prior based on soft-morphological filters and its application to image recovery are presented. In morphological image processing, a gray-scale image is represented as a subset in a three-dimensional space, which is spanned by spatial and intensity axes. Morphological opening and closing, which are basic operations in morphological image processing, respectively approximate the image subset and its complementary images as the unions of structuring elements that are translated in the three-dimensional space. In this study, the opening and closing filters are applied to an image prior to resolve the regularization problem of image recovery. When the proposed image prior is applied, the image is recovered as an image that has no noise component, which is eliminated by the opening and closing. However, the closing and opening filters are less able to eliminate Gaussian noise. In order to improve the robustness against Gaussian noise, the closing and opening filters are respectively approximated as soft-closing and soft-opening with relaxed max and min functions. In image recovery experiments, image denoising and deblurring using the proposed prior are demonstrated. Comparisons of the proposed prior with the existing priors that impose a penalty on the gradient of the intensity are also shown.

Due to the recent network service market trends, network infrastructure providers must make their network infrastructures tolerant of network service complexity and swift at providing new network services. To achieve this, we first make a design decision for the single domain network infrastructure in which we use network virtualization and separate the network service control and management from the network infrastructure and leave the resource connectivity control and management in the network infrastructure so that the infrastructure can maintain simplicity and the network service can become complex and be quickly provided. Along with the decision, we construct an architecture of the network infrastructure and a network management model. The management model defines a slice as being determined by abstracted resource requirements and restructures the roles and planes from the viewpoint of network infrastructure usability so that network service requesters can manage network resources freely and swiftly in an abstract manner within the authorities the network infrastructure operator provides. We give the details of our design and implementation for a network virtualization management system along with the model. We deployed and evaluated our designed and implemented management system on the Japan national R&E testbed (JGN-X) to confirm the feasibility of our management system design and discuss room for improvement in terms of response time and scalability towards practical use. We also investigated certain cases of sophisticated network functions to confirm that the infrastructure can accept these functions without having to be modified.

This paper proposes an adaptive band activity ratio control (ABC) with cascaded energy allocation (CEA) scheme to improve end-to-end spectral efficiency for two-hop amplify-and-forward orthogonal frequency division multiplexing relay systems under transmit energy constraint. Subchannel pairing (SP) based spectrum mapping maps spectral components transmitted over high gain subchannels in the source-to-relay link onto high gain subchannels of the relay-to-destination link to improve the spectral efficiency. However, SP suffers from a frame efficiency reduction due to the notification of information of spectral component order. To compensate for the deficiency of SP, the proposed scheme employs dynamic spectrum control with ABC in which spectral components are mapped onto subchannels having high channel gain in each link, while band activity ratio (BAR) is controlled to an optimal value, which is smaller than 1, so that all spectral components are transmitted over relatively high gain subchannels of the two links. To further improve the performance, energy allocation at the source node and the relay node is serially conducted based on convex optimization, and BAR is controlled to improve discrete-input continuous-output memoryless channel capacity at the relay node. In the proposed scheme, since only information of BAR needs to be notified, the notification overhead is drastically reduced compared to that in SP based spectrum mapping. Numerical analysis confirms that the proposed ABC combined with CEA significantly reduces the required notification overhead while achieving almost the same frame error rate performance compared with the SP based scheme.

This paper proposes two energy-efficient standby mode algorithms in short-range one-to-one 60GHz millimeter-wave (mmWave) communications. Among the many usage scenarios for mmWave radio, file downloading from kiosk terminals or peer-to-peer sync service with portable terminals are of great interest. For these portable terminals, reducing power consumption of standby mode as well as keeping connection setup time short is important. Comparing the power consumption between frame transmission and reception in short-range one-to-one 60GHz mmWave, the power consumed for a frame reception may become larger than that for a frame transmission. The proposed two energy-efficient standby mode algorithms for one-to-one communications assure the connection setup time and take each terminal's different requirement for reduction of its power consumption into consideration. In the proposed algorithms, each terminal accesses asynchronously and operates based on an interval consisting of several sub-intervals. In one proposed algorithm (Prop 1), a terminal transmits a connection request frame (CREQ) once every sub-interval and the other terminal waits for the CREQ during one sub-interval per interval. Thus, Prop 1 reduces the power consumption for CREQ transmission. In the other proposed algorithm (Prop 2), a terminal selects one sub-interval randomly for each interval and transmits CREQs repeatedly during that sub-interval. The other terminal waits for a CREQ during this CREQ transmission period at every sub-interval. Prop 2 saves the power consumption for a CREQ reception. We evaluate the power consumption of standby mode and connection setup time for Prop 1 and Prop 2 by both numerical analysis and computer simulations. We show that the power consumption of the CREQ waiting terminal with the proposed algorithms is more than 10mW lower than that with the conventional algorithm. We also show that our numerical analysis of the proposed algorithms derives the optimum parameters and facilitates system design. Next, we implement Prop 2 in a fully-integrated CMOS transceiver chip-set with antenna, RF/analog, PHY, and MAC for 60GHz proximity wireless communication. This experimental result is the same as the analysis result and it is verified that our proposed standby algorithm works as designed.

The Internet Engineering Task Force (IETF) has been actively standardizing distributed mobility management (DMM) schemes with multiple Mobility Anchors (MAs). Yet, all existing schemes have limitations that preclude the efficient distribution of mobile data traffic, including single point failure problems, heavy tunneling overheads between MAs, and a restrictive traffic distribution for external nodes in a mobility domain. Therefore, this paper proposes an efficient mobility management scheme with a virtual Local Mobility Anchor (vLMA). While the vLMA is designed assuming multiple replicated LMAs for a PMIPv6 domain, it acts virtually as a single LMA for the internal and external nodes in the PMIPv6 domain. Furthermore, the vLMA distributes mobile data traffic using replicated LMAs, and routes packets via a replicated LMA on the optimal routing path. Performance evaluations confirm that the proposed scheme can distribute mobile data traffic more efficiently and reduce the end-to-end packet delay than the Distributed Local Mobility Anchor (DLMA) and the Proxy Mobile IPv6 (PMIPv6).

This paper presents a prediction model based on historical data to achieve optimal values of pipelining, concurrency and parallelism (PCP) in GridFTP data transfers in Cloud systems. Setting the correct values for these three parameters is crucial in achieving high throughput in end-to-end data movement. However, predicting and setting the optimal values for these parameters is a challenging task, especially in shared and non-predictive network conditions. Several factors can affect the optimal values for these parameters such as the background network traffic, available bandwidth, Round-Trip Time (RTT), TCP buffer size, and file size. Existing models either fail to provide accurate predictions or come with very high prediction overheads. The author shows that new model based on historical data can achieve high accuracy with low overhead.

In developing an automatic system of a single tooth length measurement on x-ray image, since a tooth shape is assumed to be straight and curve, an algorithm which can accurately deal with straight and curve is required. This paper proposes an automatic algorithm for measuring the length of single straight and curve teeth. In the algorithm consisting of control point determination, curve fitting, and length measurement, PCA is employed to find the first and second principle axes as vertical and horizontal ones of the tooth, and two terminal points of vertical axis and the junction of those axes are determined as three first-order control points. Signature is then used to find a peak representing tooth root apex as the forth control point. Bezier curve, Euclidean distance, and perspective transform are finally applied with determined four control points in curve fitting and tooth length measurement. In the experiment, comparing with the conventional PCA-based method, the average mean square error (MSE) of the line points plotted by the expert is reduced from 7.548 pixels to 4.714 pixels for tooth image type-I, whereas the average MSE value is reduced from 7.713 pixels and 7.877 pixels to 4.809 pixels and 5.253 pixels for left side and right side of tooth image type-H, respectively.

The timing synchronization scheme for massive MIMO systems is proposed with CCK (Complementary Code Keying) codes in this letter. Our proposed scheme is specifically designed to generate synchronization sequence with large family size. The optimal sequences can be constructed with ZCZ or LCZ based on the number of antennas. Furthermore Monte Carlo simulation results confirmed the expected detection probability for massive MIMO systems.

Due to limitations of today's widely-deployed commercial networks, some end-user applications are only possible through, or greatly improved by execution on virtualized networks that have been enhanced or idealized in a way which specifically supports the application. This paper describes US Ignite and the advantages provided to US Ignite end-user applications running on virtual networks which variously: (a) minimize latency, (b) minimize jitter, (c) minimize or eliminate packet drops, (d) optimize branch points for multicast packet duplication, (e) provide isolation for sensitive information flows, and/or (f) bundle network billing with application use. Examples of US Ignite applications in these categories are provided.

In conventional wireless cellular networks, cell coverage is static and fixed, and each user equipment (UE) is connected to one or a few local base stations (BS). However, the users' distribution in the network area commonly fluctuates during a day. When there are congeries of users in some areas, conventional networks waste idle network resources in sparse areas. To address this issue, we propose a novel approach for cooperative cluster formation to dynamically transfer idle network resources from sparse cells to crowded cells or hotspots. In our proposed scheme, BS coverage is directed to hotspots by dynamically changing the antennas' beam angles, and forming large optimal cooperative clusters around hotspots. In this study, a cluster is a group of BSs that cooperatively perform joint transmission (JT) to several UEs. In this paper, a mathematical framework for calculation of the system rate of a cooperative cluster is developed. Next, the set of BSs for each cluster and the antennas' beam angles of each BS are optimized so that the system rate of the network is maximized. The trend of performance variation versus cluster size is studied and its limitations are determined. Numerical results using 3GPP specifications show that the proposed scheme attains several times higher capacity than conventional systems.