We describe the characteristics of scattering and diffraction of plane E-waves by a lossy dielectric elliptic cylinder. The computational programs for calculating the analytic solutions for the diffraction of a lossy dielectric elliptic cylinder can be achieved. From the calculated results of the backscattering cross section (BSCS) (usually the radar cross section: RCS) and the forward-scattering cross section (FSCS) due to the cross-sectional shape and complex dielectric constant of the elliptic cylinder, the features of the BSCS and FSCS can be clarified as follows. (1) There is a cross-sectional shape of the cylinder which results in a minimum BSCS with a complex dielectric constant of the cylinder. (2) The BSCS and FSCS of the lossy dielectric scatterer approach zero as the scatterer approaches a strip. This result means that no material composing such a strip exists, and the features are very different from those in a perfectly conducting strip. (3) The influence of conductivity, σ, of the cylinder on a scattered wave is small for the relative dielectric constant of εr6. (4) The total scattering cross section of the lossy dielectric elliptic cylinder which causes the minimum BSCS is not small. Hence, it may be considered that the minimum BSCS is determined mainly by interference based on the cross-sectional shape and complex dielectric constant of cylinder, and is not caused by incident wave absorption due to the lossy dielectric.

In this paper, we developed the analytical method for the radiation field from a line current source placed in a stratified slab waveguide. This method is applicable to the analysis of excitation problem of inhomogeneous slab waveguide by increasing the number of layers. The numerical results are given for the cases of five layers, such as W and M type waveguides, and the inhomogeneous slab waveguide. The influence of guided and leaky modes on the radiation field are studied.

The mechanical impedance of silicone–gel model or chest surface has been measured and the viscoelasticity and effective vibrating radius have been obtained from the impedance. They depend on the distance between the internal block of the silicone–gel/ribs of right chest and the gel surface/skin surface. The 3–D image of internal structure is reconstructed, based on the relation between the distance from the surface and the effective vibrating radius.

A new polarization splitter at optical frequencies is proposed. The basic structure of the device is a tapered velocity coupler which is composed of a straight and a dimensionally tapered slab waveguide on a LiNbO3 substrate. The numerical results obtained with the finite difference method indicate that extinction ratios of polarization less than 2% for both TE and TM modes are possible of realization under moderate control voltages and that the splitting characteristics are stable over a wide range of frequencies.

The propagation characteristics of dielectric waveguides with slanted grating structure are analyzed by using the combination of the improved Fourier series expansion method and the approximated multilayer method. The slanted grating region is appoximated by a structure with stratified thin modulated index layers. This method is effective to the guiding problems of the planar slanted grating, because the electromagnetic fields in each layer can be expressed by shifting the phase of the solution in the first layer. In this paper, numerical results are given for the grating with the rectangular and the sinusoidal profile for arbitrary slant angle. The radiation efficiencies for the grating with negative and positive slant angle are also discussed.

This paper presents a modified disparity measurement to recover the depth and a robust method to estimate motion parameters. First, this paper considers phase correspondence for the computation of disparity. It has less computation for disparity than previous methods that use the disparity from correspondence and from correlation. This modified disparity measurement uses the Gabor filter to analyze the local phase property and the exponential filter to analyze the global phase property. These two phases are added to make quasi-linear phases of the stereo image channels which are used for the stereo disparity finding and the structure recovery of scene. Then, we use feature-based correspondence to find the corresponding feature points in temporal image pair. Finally, we combine the depth map and use disparity motion stereo to estimate 3-D motion parameters.

Introducing a general statistical model of image noise, we present an optimal algorithm for computing 3-D motion from two views without involving numerical search: () the essential matrix is computed by a scheme called renormalization; () the decomposability condition is optimally imposed on it so that it exactly decomposes into motion parameters; () image feature points are optimally corrected so that they define their 3-D depths. Our scheme not only produces a statistically optimal solution but also evaluates the reliability of the computed motion parameters and reconstructed points in quantitative terms.

Based on a newly proposed notion of relational network, a novel learning mechanism for model acquisition is developed. This new mechanism explicitly deals with both qualitative and quantitative relations between parts of an object. Qualitative relations are mirrored in the topology of the network. Quantitative relations appear in the form of generalized predicates, that is, predicates that are graded in their validity over a certain range. Starting from a decomposition of binary objects into meaningful parts, first a description of the decomposition in terms of relational networks is obtained. Based on the description of two or more instances of the same concept, generalizations are obtained by first finding matchings between instances. Generalizing itself proceeds on two levels: the topological and the predicate level. Topological generalization is achieved by a simple rule-based graph generalizer. Generalization of the predicates uses some ideas from MYCIN. After successful generalization, the system attempts to derive a simple and coarse description of the achieved result in terms of near natural language. Several examples underline the validity of relational networks and illustrate the performance of the proposed system.

In this paper, the influences of the cross-sectional deformation on the coplanar waveguide (CPW) characteristics for the use of Ti: LiNbO3optical modulator are presented based on quasi-static analysis. In particular, the influences of the changes in the thickness of Ti: LiNbO3 substrate and the cross-sectional shape of electrodes are studied in detail by using the finite element method proposed previously. As a result, it is found that the propagation characteristics of the dominant mode change significantly with the thickness of LiNbO3 substrate when it is less than 100 µm. It is also shown that an inverted trapezoidal deformation of the electrode cross section is promising because a wider electrode gap and thinner electrodes are available in the design of optical modulators.

There has been an increasing demand for telecommunication services that satisfy individual users' requirements such as personal telecommunication services and intelligent network services. This demand for advanced telecommunications services is having a great impact on the control architecture and mechanism. In this paper, we propose a new representation of processing power for telecommunications services, using TPS (Transaction Per Second), instead of BHCA, which has been the most commonly used parameter for conventional telephone networks. In developing an IN benchmark, telecommunications services are compared with the TPC-A (Transaction Processing Performance Council-A) benchmark model based on TPS. This benchmark is then used to estimate the requirements for processing power, which, in turn, indicate the necessity for a distributed control. A layered architecture, compatible architecture, and control mechanism for user services are employed to adapt to the distributed network environment.

This paper first proposes an object-oriented service network model, which is composed of application, server and resource object groups, from both viewpoints of rapid and smooth introduction and effective execution of the next generation IN services. The paper also, proposes a testbed system, which is referred to as "To-be-IN (Testbed on Object-oriented and B-ISDN Environment for IN)", for evaluating network architecture based on the proposed model. Using the testbed, several technical issues can be solved such as object-oriented realization of IN services, a provision of distribution transparent environment and a transition strategy from today's IN network. The testbed system is constructed on a currently available computing environment in which a distribution transparency mechanism is added. This system provides Service Creation Environment (SCE) for a purpose of achieving seamless software transfer from a development phase to an operation phase in the object-oriented service network model. The paper finally summarizes some results of an experimental implementation of the system.

For the purpose of detecting the intracranial vascular deformations noninvasively, transducer for bruit sound emanated from diseased lesion and analyzing system were developed and applied clinically. Several aspects of the bruit signals were clarified and the possibility of early diagnosis was increased.

The warp model of the extended Hough transform (EHT) has been proposed to design the explicit expression of the transform function of EHT. The warp model is a skewed parameter space (R(µ,ξ), φ(µ,ξ)) of the space (µ,ξ), which is homeomorphic to the original (ρ,θ) parameter space. We note that the introduction of the skewness of the parameter space defines the angular and positional sensitivity characteristics required in the detection of lines from the pattern space. With the intent of contributing some solutions to basic computer vision problems, we present theoretically a dynamic and centralfine/peripheral-coarse camera vision architecture by means of this warp model of Hough transform. We call this camera vision architecture askant vision' from an analogy to the human askant glance. In this paper, an outline of the EHT is briefly shown by giving three functional conditions to ensure the homeomorphic relation between (µ,ξ) and (ρ,θ) parameter spaces. After an interpretation of the warp model is presented, a procedure to provide the transform function and a central-coarse/peripheralfine Hough transform function are introduced. Then in order to realize a dynamic control mechanism, it is proposed that shifting of the origin of the pattern space leads to sinusoidal modification of the Hough parameter space.

A new leaky surface wave on lithium tetraborate that propagates along the surface with a higher phase velocity than that of ordinary leaky surface waves, radiating two bulk wave terms into the solid, is described.

This paper presents a cost-effective network for very large ATM cross-connects. In order to develop it, we propose the delta network with expanded middle stages. This proposed network is the intermediate network between a nonblocking network and the delta network with respect to the cost of hardware and internal blocking probability. Using this network, we explore the tradeoff between the cost and internal blocking probability, and derive the optimum configuration under temporarily deviating traffic. Internal blocking occurs when input traffic temporarily deviates from its average value. However, we cannot evaluate the internal blocking probability by using conventional traffic models. In this paper, we adopt temporarily deviating traffic such that all traffic is described as the superposition of the paths which are defined by traffic parameters. As can easily be seen, the path corresponds to virtual path (VP) or virtual channel (VC). Therefore, we believe that our model describes actual traffic more exactly than conventional models do. We show that the optimum configuration is the proposed network whose expansion ratio γ=3 when the maximum number of paths that can be accommodated in one link is greater than 22. This network achieves the internal blocking probability of 10-10. As an example of this network, we show that the proposed network of size 7272 is constructed with only 40% of the hardware required by the nonblocking network.

We present a novel algorithm to reconstruct the refractive-index profile of a circularly symmetric object from measurements of the electromagnetic field scattered when the object is illuminated by a plane wave. The reconstruction algorithm is besed on an iterative procedure of matching the scattered field calculated from a certain refractive-index distribution with the measured scattered field on the boundary of the object. In order to estimate the convergence of the reconstruction, the mean square error between the calculated and measured scattered fields is introduced. It is shown through reconstructing several examples of lossy dielectric cylinders that the algorithm is quite stable and is applicable to high-contrasty models in situations where the Born approximation is not valid.

It is shown that a self–recurrent fuzzy inference can cause chaotic responses at least three membership functions, if the inference rules are set to represent nonlinear relations such as pie–kneading transformation. This system has single input and single output both with crisp values, in which membership functions is taken to be triangular. Extensions to infinite memberships are proposed, so as to reproduce the continuum case of one–dimensional logistic map f(x)=Ax(1–x). And bifurcation diagrams are calculated for number N of memberships of 3, 5, 9 and 17. It is found from bifurcation diagrams that different periodic states coexist at the same bifurcation parameter for N9. This indicates multistability necessarily accompanied with hysteresis effects. Therefore, it is concluded that the final states are not uniquely determined by fuzzy inferences with sufficiently large number of memberships.

A new algorithm, which is incorporated into the waveform relaxation analysis, for efficiently simulating the transient response of single lossy transmission lines or lossy coupled multiconductor transmission lines, terminated with arbitrary networks will be presented. This method exploits the inherent delay present in a transmission line for achieving simulation efficiency equivalent to obtaining converged waveforms with a single iteration by the conventional iterative waveform relaxation approach. To this end we propose 'line delay window partitioning' algorithm in which the simulation interval is divided into sequential windows of duration equal to the transmission line delay. This window scheme enables the computation of the reflected voltage waveforms accurately, ahead of simulation, in each window. It should be noted that the present window partitioning scheme is different from the existing window techniques which are aimed at exploiting the non–uniform convergence in different windows. In contrast, the present window technique is equivalent to achieving uniform convergence in all the windows with a single iteration. In addition our method eliminates the need to simulate the transmission line delay by the application of Branin's classical method of characteristics. Further, we describe a simple and efficient method to compute the attenuated waveforms using a particular form of lumped element model of attenuation function. Simulation examples of both single and coupled lines terminated with linear and nonlinear elements will be presented. Comparison indicates that the present method is several times faster than the previous waveform relaxation method and its accuracy is verified by the circuit simulator PSpice.

In this paper, we propose the architecture of BALANCE (Better Adaptive Load-balancing through Acquiring kNowledge of Characteristic of an Environment) in which users can submit their jobs without acquiring either a status of an environment or characteristics of jobs and servers even in a widely connected heterogeneous network. The architecture of BALANCE includes three types of information bases and two types of daemons. Information bases, namely job, resource, and environment information base, manage the knowledge of job characteristics, available resources for CPUs, and status of the environment, respectively, as a proxy for users. The dispatching daemon selects an adequate server for each job using knowledge stored in the information bases. A service daemon executes each job. On completing each job, a service daemon gets a statistic of the job and returns it to the dispatching daemon where the job came from so that the statistic will be available at the next dispatching time. BALANCE enables an environment (1) to balance the load, (2) to share software functions as well as hardware facilities, and (3) to learn a user's job characteristics. We have implemented a prototype with more than 50 heterogeneous UNIX workstations connected by different networks. Two simple experiments on this prototype are presented. These experiments show a load balancing scheme that takes the characteristics of each job into account.