In this study, we developed a new orthogonal partition concept for asymmetric orthogonal arrays and used it for the construction of orthogonal arrays for the first time. Permutation matrices and the Kronecker product were also successfully and skillfully used as our main tools. Hence, a new general iterative construction method for asymmetric orthogonal arrays of high strength was developed, and some new infinite families of orthogonal arrays of strength 3 and several new orthogonal arrays of strength 4, 5, and 6 were obtained.

A triangular decomposition-based multipath super-resolution method is proposed to improve the range resolution of small unmanned aerial vehicle (UAV) radar altimeters that use a single channel with continuous direct spread waveform. In the engineering applications of small UAV radar altimeter, multipath scenarios are quite common. When the conventional matched filtering process is used under these environments, it is difficult to identify multiple targets in the same range cell due to the overlap between echoes. To improve the performance, we decompose the overlapped peaks yielded by matched filtering into a series of basic triangular waveforms to identify various targets with different time-shifted correlations of the pseudo-noise (PN) sequence. Shifting the time scale enables targets in the same range resolution unit to be identified. Both theoretical analysis and experiments show that the range resolution can be improved significantly, as it outperforms traditional matched filtering processes.

To completely utilize the advantages of dynamic voltage and frequency scaling (DVFS) techniques, a quantized decoder (QNT-D) was developed. The QNT-D generates a quantized signal processing quantity (Q) using a predicted signal processing quantity (M). Q is used to produce the optimum frequency (opt.fc) and the optimum supply voltage (opt.VD) that are proportional to Q. To develop a DVFS controlled motion estimation (ME) processor, we used both the QNT-D and a fast ME algorithm called A2BC (Adaptively Assigned Breaking-off Condition) to predict M for each macro-block (MB). A DVFS controlled ME processor was fabricated using 90-nm CMOS technology. The total power dissipation (PT) of the processor was significantly reduced and varied from 38.65 to 99.5 µW, only 3.27 to 8.41 % of PT of a conventional ME processor, depending on the test video picture.

This paper presents a theoretical design of novel THz bandpass filters composed of M-PhC (metallic-photonic-crystal) point-defect-cavities (PDCs) with a centrally-loaded-rod. After a brief review of the properties of the recently-proposed M-PhC PDCs, two inline-type bandpass filters are synthesized in terms of the coupling matrix theory. The FDTD simulation results of the synthesized filters are in good agreement with the theoretical ones, which confirms the validity of the proposed filters' structures and the design scheme.

In this paper, dependency of transmission loss of shielded-flexible printed circuits (FPC) for differential-signaling on thickness of conductive shield is studied by numerical modeling based on an equivalent circuit model compared with the experimental results. Especially, the transmission loss due to the thin conductive shield is focused. The insufficient shielding performance for near magnetic field decreases the resistance due to the thin conductive shield. It is shown that the resistance due to the thin conductive shield at lower frequencies is smaller than that in the “thick conductive shield” case.

We are developing an Ultra-Low Field (ULF) Magnetic Resonance Imaging (MRI) system with a tuned high-Tc (HTS)-rf-SQUID for food inspection. We previously reported that a small hole in a piece of cucumber can be detected. The acquired image was based on filtered back-projection reconstruction using a polarizing permanent magnet. However the resolution of the image was insufficient for food inspection and took a long time to process. The purpose of this study is to improve image quality and shorten processing time. We constructed a specially designed cryostat, which consists of a liquid nitrogen tank for cooling an electromagnetic polarizing coil (135mT) at 77K and a room temperature bore. A Cu pickup coil was installed at the room temperature bore and detected an NMR signal from a sample. The signal was then transferred to an HTS SQUID via an input coil. Following a proper MRI sequence, spatial frequency data at 64×32 points in k-space were obtained. Then, a 2D-FFT (Fast Fourier Transformation) method was applied to reconstruct the 2D-MR images. As a result, we successfully obtained a clear water image of the characters “TUT”, which contains a narrowest width of 0.5mm. The imaging time was also shortened by a factor of 10 when compared to the previous system.

This letter describes a method that characterizes and improves the performance of a time-interleaved (TI) digital-to-analog converter (DAC) system by using multiport signal-flow graphs at microwave frequencies. A commercial signal generator with two TI DACs was characterized through s-parameter measurements and was compared to the conventional method. Moreover, prefilters were applied to correct the response, resulting in an error-vector magnitude improvement of greater than 8 dB for a 64-quadrature-amplitude-modulated signal of 4.8 Gbps. As a result, the bandwidth limitation and the complex post processing of the conventional method could be minimized.

In recent years, deep learning based image recognition, speech recognition, text translation and other related applications have brought great convenience to people's lives. With the advent of the era of internet of everything, how to run a computationally intensive deep learning algorithm on a limited resources edge device is a major challenge. For an edge oriented computing vector processor, combined with a specific neural network model, a new data layout method for putting the input feature maps in DDR, rearrangement of the convolutional kernel parameters in the nuclear memory bank is proposed. Aiming at the difficulty of parallelism of two-dimensional matrix convolution, a method of parallelizing the matrix convolution calculation in the third dimension is proposed, by setting the vector register with zero as the initial value of the max pooling to fuse the rectified linear unit (ReLU) activation function and pooling operations to reduce the repeated access to intermediate data. On the basis of single core implementation, a multi-core implementation scheme of Inception structure is proposed. Finally, based on the proposed vectorization method, we realize five kinds of neural network models, namely, AlexNet, VGG16, VGG19, GoogLeNet, ResNet18, and performance statistics and analysis based on CPU, gtx1080TI and FT2000 are presented. Experimental results show that the vector processor has better computing advantages than CPU and GPU, and can calculate large-scale neural network model in real time.

During the execution of software, tremendous amounts of data can be recorded. By exploiting the execution data, one can discover behavioral models to describe the actual software execution. As a well-known open-source process mining toolkit, ProM integrates quantities of process mining techniques and enjoys a variety of applications in a broad range of areas. How to develop a better ProM software, both from user experience and software performance perspective, are of vital importance. To achieve this goal, we need to investigate the real execution behavior of ProM which can provide useful insights on its usage and how it responds to user operations. This paper aims to propose an effective approach to solve this problem. To this end, we first instrument existing ProM framework to capture execution logs without changing its architecture. Then a two-layered framework is introduced to support accurate ProM behavior discovery by characterizing both user interaction behavior and plug-in calling behavior separately. Next, detailed discovery techniques to obtain user interaction behavior model and plug-in calling behavior model are proposed. All proposed approaches have been implemented.

With the expansion of the Internet, the number of available Web services has increased. Web service clustering to identify functionally similar clusters has become a major approach to the efficient discovery of suitable Web services. In this study, we propose a Web service clustering approach that uses novel ontology learning and a similarity calculation method based on the specificity of an ontology in a domain with respect to information theory. Instead of using traditional methods, we generate the ontology using a novel method that considers the specificity and similarity of terms. The specificity of a term describes the amount of domain-specific information contained in that term. Although general terms contain little domain-specific information, specific terms may contain much more domain-related information. The generated ontology is used in the similarity calculations. New logic-based filters are introduced for the similarity-calculation procedure. If similarity calculations using the specified filters fail, then information-retrieval-based methods are applied to the similarity calculations. Finally, an agglomerative clustering algorithm, based on the calculated similarity values, is used for the clustering. We achieved highly efficient and accurate results with this clustering approach, as measured by improved average precision, recall, F-measure, purity and entropy values. According to the results, specificity of terms plays a major role when classifying domain information. Our novel ontology-based clustering approach outperforms comparable existing approaches that do not consider the specificity of terms.

Software-defined networking (SDN) is recognized as the next-generation networking paradigm. The software-defined architecture for underwater acoustic sensor networks (SDUASNs) has become a hot topic. However, the current researches on SDUASNs is still in its infancy, which mainly focuses on network architecture, data transmission and routing. There exists some shortcomings that the scale of the SDUASNs is difficult to expand, and the security maintenance is seldom dabble. Therefore, a scalable software-definition architecture for underwater acoustic sensor networks (SSDUASNs) is introduced in this paper. It realizes an organic combination of the knowledge level, control level, and data level. The new nodes can easily access the network, which could be conducive to large-scale deployment. Then, the basic security authentication mechanism called BSAM is designed based on our architecture. In order to reflect the advantages of flexible and programmable in SSDUASNs, security authentication mechanism with pre-push (SAM-PP) is proposed in the further. In the current UASNs, nodes authentication protocol is inefficient as high consumption and long delay. In addition, it is difficult to adapt to the dynamic environment. The two mechanisms can effectively solve these problems. Compared to some existing schemes, BSAM and SAM-PP can effectively distinguish between legal nodes and malicious nodes, save the storage space of nodes greatly, and improve the efficiency of network operation. Moreover, SAM-PP has a further advantage in reducing the authentication delay.

In this paper, a multilevel thresholding color image segmentation method is proposed using a modified Artificial Bee Colony(ABC) algorithm. In this work, in order to improve the local search ability of ABC algorithm, Krill Herd algorithm is incorporated into its onlooker bees phase. The proposed algorithm is named as Krill herd-inspired modified Artificial Bee Colony algorithm (KABC algorithm). Experiment results verify the robustness of KABC algorithm, as well as its improvement in optimizing accuracy and convergence speed. In this work, KABC algorithm is used to solve the problem of multilevel thresholding for color image segmentation. To deal with luminance variation, rather than using gray scale histogram, a HSV space-based pre-processing method is proposed to obtain 1D feature vector. KABC algorithm is then applied to find thresholds of the feature vector. At last, an additional local search around the quasi-optimal solutions is employed to improve segmentation accuracy. In this stage, we use a modified objective function which combines Structural Similarity Index Matrix (SSIM) with Kapur's entropy. The pre-processing method, the global optimization with KABC algorithm and the local optimization stage form the whole color image segmentation method. Experiment results show enhance in accuracy of segmentation with the proposed method.

In historical learning, to grasp the causal relationship between historical events and to understand factors that bring about important events are significant for fostering the historical thinking. However, some students are not able to find historical events that have causal relationships. The view of observing the historical events is different among individuals, so it is not appropriate to define the historical events that have causal relationships and impose students to remember them. The students need to understand the definition of the causal relationships and find the historical events that satisfy the definition according to their viewpoints. The objective of this paper is to develop a support system for understanding the meaning of a causal relationship and creating causal relation graphs that represent the causal relationships between historical events. When historical events have a causal relationship, a state change caused by one event becomes the cause of the other event. To consider these state changes is critically important to connect historical events. This paper proposes steps for considering causal relationships between historical events by arranging the state changes of historical people along with them. It also develops the system that supports students to create the causal relation graph according to the state changes. In our system, firstly, the interface for arranging state changes of historical people according to the historical events is given. Then, the interface for drawing the causal relation graph of historical events is provided in which state changes are automatically indicated on the created links in the causal relation graph. By observing the indicated state changes on the links, students are able to check by themselves whether their causal relation graphs correctly represent the causal relationships between historical events.

The traditional Markov prediction methods of the taxi destination rely only on the previous 2 to 3 GPS points. They negelect long-term dependencies within a taxi trajectory. We adopt a Recurrent Neural Network (RNN) to explore the long-term dependencies to predict the taxi destination as the multiple hidden layers of RNN can store these dependencies. However, the hidden layers of RNN are very sensitive to small perturbations to reduce the prediction accuracy when the amount of taxi trajectories is increasing. In order to improve the prediction accuracy of taxi destination and reduce the training time, we embed suprisal-driven zoneout (SDZ) to RNN, hence a taxi destination prediction method by regularized RNN with SDZ (TDPRS). SDZ can not only improve the robustness of TDPRS, but also reduce the training time by adopting partial update of parameters instead of a full update. Experiments with a Porto taxi trajectory data show that TDPRS improves the prediction accuracy by 12% compared to RNN prediction method in literature[4]. At the same time, the prediction time is reduced by 7%.

Multi-task joint sparse representation (MTJSR) is one kind of efficient multi-task learning (MTL) method for solving different problems together using a shared sparse representation. Based on the learning mechanism in human, which is a self-paced learning by gradually training the tasks from easy to difficult, I apply this mechanism into MTJSR, and propose a multi-task joint sparse representation with self-paced learning (MTJSR-SP) algorithm. In MTJSR-SP, the self-paced learning mechanism is considered as a regularizer of optimization function, and an iterative optimization is applied to solve it. Comparing with the traditional MTL methods, MTJSR-SP has more robustness to the noise and outliers. The experimental results on some datasets, i.e. two synthesized datasets, four datasets from UCI machine learning repository, an oxford flower dataset and a Caltech-256 image categorization dataset, are used to validate the efficiency of MTJSR-SP.

We present a system to improve the robustness of real-time 3D surface reconstruction by utilizing non-inertial localization sensor. Benefiting from such sensor, our easy-to-build system can effectively avoid tracking drift and lost comparing with conventional dense tracking and mapping systems. To best fusing the sensor, we first adopt a hand-eye calibration and performance analysis for our setup and then propose a novel optimization framework based on adaptive criterion function to improve the robustness as well as accuracy. We apply our system to several challenging reconstruction tasks, which show significant improvement in scanning robustness and reconstruction quality.

In this paper we extend hyperparameter-free sparse signal reconstruction approaches to permit the high-resolution time delay estimation of spread spectrum signals and demonstrate their feasibility in terms of both performance and computation complexity by applying them to the ISO/IEC 24730-2.1 real-time locating system (RTLS). Numerical examples show that the sparse asymptotic minimum variance (SAMV) approach outperforms other sparse algorithms and multiple signal classification (MUSIC) regardless of the signal correlation, especially in the case where the incoming signals are closely spaced within a Rayleigh resolution limit. The performance difference among the hyperparameter-free approaches decreases significantly as the signals become more widely separated. SAMV is sometimes strongly influenced by the noise correlation, but the degrading effect of the correlated noise can be mitigated through the noise-whitening process. The computation complexity of SAMV can be feasible for practical system use by setting the power update threshold and the grid size properly, and/or via parallel implementations.

This paper investigates approaches that can cancel nonlinear phase noise effectively for the phase-conjugate pair diversity transmission of 16-QAM WDM signals through multi-core fiber. The geometric mean is introduced for the combination of the phase-conjugate pair. A numerical simulation suggests that span-by-span chromatic dispersion compensation is more effective at cancelling phase noise in long distance transmission than lumped compensation at the receiver. Simulations suggest the span-wise compensation described herein yields Q-value enhancement of 7.8 and 6.8dB for CD values of 10 and 20.6ps/nm/km, respectively, whereas the lumped compensation equivalent attains only 3.5dB. A 1050km recirculating loop experiment confirmed a Q-value enhancement of 4.1dB for 20.6ps/nm/km, span-wise compensation transmission.

Objective: Detection of Electrocardiogram (ECG) characteristic points can provide critical diagnostic information about heart diseases. We proposed a novel feature extraction and machine learning scheme for automatic detection of ECG characteristic points. Methods: A new feature, termed as randomly selected wavelet transform (RSWT) feature, was devised to represent ECG characteristic points. A random forest classifier was adapted to infer the characteristic points position with high sensitivity and precision. Results: Compared with other state-of-the-art algorithms' testing results on QT database, our detection results of RSWT scheme showed comparable performance (similar sensitivity, precision, and detection error for each characteristic point). RSWT testing on MIT-BIH database also demonstrated promising cross-database performance. Conclusion: A novel RSWT feature and a new detection scheme was fabricated for ECG characteristic points. The RSWT demonstrated a robust and trustworthy feature for representing ECG morphologies. Significance: With the effectiveness of the proposed RSWT feature we presented a novel machine learning based scheme to automatically detect all types of ECG characteristic points at a time. Furthermore, it showed that our algorithm achieved better performance than other reported machine learning based methods.

This paper presents an adaptive least-significant-bit (LSB) steganography for spatial color images on smartphones. For each red, green, and blue color component, the combinations of All-4bit, One-4bit+Two-2bit, and Two-3bit+One-2bit LSB replacements are proposed for content-adaptivity and natural histograms. The high capacity of 8.4bpp with the average peak signal noise ratio (PSNR) 43.7db and fast processing times on smartphones are also demonstrated