This paper presents a high power efficient pulse VCO with tail-filter for the chip-scale atomic clock (CSAC) application. The stringent power and clock stability specifications of next-generation CSAC demand a VCO with ultra-low power consumption and low phase noise. The proposed VCO architecture aims for the high power efficiency, while further reducing the phase noise using tail filtering technique. The VCO has been implemented in a standard 45nm SOI technology for validation. At an oscillation frequency of 5.0GHz, the proposed VCO achieves a phase noise of -120dBc/Hz at 1MHz offset, while consuming 1.35mW. This translates into an FoM of -191dBc/Hz.

In the current era of data science, data quality has a significant and critical impact on business operations. This is no different for the meteorological data encountered in the field of meteorology. However, the conventional methods of meteorological data quality control mainly focus on error detection and null-value detection; that is, they only consider the results of the data output but ignore the quality problems that may also arise in the workflow. To rectify this issue, this paper proposes the Total Meteorological Data Quality (TMDQ) framework based on the Total Quality Management (TQM) perspective, especially considering the systematic nature of data warehousing and process focus needs. In practical applications, this paper uses the proposed framework as the basis for the development of a system to help meteorological observers improve and maintain the quality of meteorological data in a timely and efficient manner. To verify the feasibility of the proposed framework and demonstrate its capabilities and usage, it was implemented in the Tamsui Meteorological Observatory (TMO) in Taiwan. The four quality dimension indicators established through the proposed framework will help meteorological observers grasp the various characteristics of meteorological data from different aspects. The application and research limitations of the proposed framework are discussed and possible directions for future research are presented.

The shift-and-add property (SAP) of a p-ary m-sequence {ak} with period N=pn-1 means that this sequence satisfies the equation {ak+η}+{ak+τ}={ak+λ} for some integers η, τ and λ. For an arbitrarily-given p-ary m-sequence {ak}, we develop an algebraic approach to determine the integer λ for the arbitrarily-given integers η and τ. And all trinomials can be given. Our calculation only depends on the reciprocal polynomial of the primitive polynomial which produces the given m-sequence {ak}, and the cyclotomic cosets mod pn-1.

Link-level and node-level blocking in photonic networks has been intensively investigated for several decades and the C/D/C approach to OXCs/ROADMs is often emphasized. However, this understanding will have to change in the future large traffic environment. We herein elucidate that exploiting node-level blocking can yield cost-effective large-capacity wavelength routing networks in the near future. We analyze the impact of link-level and node-level blocking in terms of traffic demand and assess the fiber utilization and the amount of hardware needed to develop OXCs/ROADMs, where the necessary number of link fibers and that of WSSs are used as metrics. We clarify that the careful introduction of node-level blocking is the more effective direction in creating future cost effective networks; compared to C/D/C OXCs/ROADMs, it offers a more than 70% reduction in the number of WSSs while the fiber increment is less than ~2%.

Order preserving matching refers to the problem of reporting substrings in the text which are order-isomorphic to the pattern. In this paper, we show a simple heuristic which runs in linear time on average, based on finding the largest elements in each substring and checking their locations against that of the pattern. It is easy to implement and experimental results showed that the running time grows linearly.

DHT routing algorithms can provide efficient mechanisms for resource placement and lookup for distributed file sharing systems. However, we must still deal with irregular and frequent join/leave of nodes and the problem of load unbalancing between nodes in DHT-based file sharing systems. This paper presents an efficient file backup scheme based on dynamic DHT key space clustering in order to guarantee data availability and support load balancing. The main idea of our method is to dynamically divide the DHT network into a number of clusters, each of which locally stores and maintains data chunks of data files to guarantee the data availability of user data files even when node churn occurs. Further, high-capacity nodes in clusters are selected as backup nodes to achieve adequate load balancing. Simulation results demonstrate the superior effectiveness of the proposed scheme over other file replication schemes.

If a shared IP network is to deliver large-volume streaming media content, such as real-time videos, we need a technique for explicitly setting and dynamically changing the transmission paths used to respond to the congestion situation of the network, including multi-path transmission of a single-flow, to maximize network bandwidth utilization and stabilize transmission quality. However, current technologies cannot realize flexible multi-path transmission because they require complicated algorithms for route searching and the control load for route changing is excessive. This paper proposes a scheme that realizes routing control for multi-path transmission by combining multiple virtual networks on the same physical network. The proposed scheme lowers the control load incurred in creating a detour route because routing control is performed by combining existing routing planes. In addition, our scheme simplifies route searching procedure because congestion avoidance control of multi-path transmission can be realized by the control of a single path. An experiment on the JGN-X network virtualization platform finds that while the time taken to build an inter-slice link must be improved, the time required to inspect whether each slice has virtual nodes that can be connected to the original slice and be used as a detour destination can be as short as 40 microseconds per slice even with large slices having more than 100 virtual nodes.

We investigate the uplink channel selection problem of unmanned aerial vehicle (UAV)-aided data collection system in delay-sensitive sensor networks. In the studied model, the fixed-wing UAV is dispatched to gather sensing information from terrestrial sensor nodes (SNs) and they contend for uplink channels for transmission. With the goal of minimizing the system-wide delay, we formulate a resource allocation problem. Encountered with the challenge that the flight trajectory of UAV is unknown to SNs and the wireless channel is time-varying, we solve the problem by stochastic game approach and further propose a fully distributed channel selection algorithm which is proved to converge to a pure strategy Nash Equilibrium (NE). Simulation results are presented to show that our proposed algorithm has good performance.

A novel Nyquist Folding Receiver (NYFR) based passive localization algorithm with Sparse Bayesian Learning (SBL) is proposed to estimate the position of a spaceborne Synthetic Aperture Radar (SAR).Taking the geometry and kinematics of a satellite into consideration, this paper presents a surveillance geometry model, which formulates the localization problem into a sparse vector recovery problem. A NYFR technology is utilized to intercept the SAR signal. Then, a convergence algorithm with SBL is introduced to recover the sparse vector. Furthermore, simulation results demonstrate the availability and performance of our algorithm.

By taking advantages of deep learning and reinforcement learning, ADNet (Action Decision Network) outperforms other approaches. However, its speed and performance are still limited by factors such as unreliable confidence score estimation and redundant historical actions. To address the above limitations, a faster and more accurate approach named Faster-ADNet is proposed in this paper. By optimizing the tracking process via a status re-identification network, the proposed approach is more efficient and 6 times faster than ADNet. At the same time, the accuracy and stability are enhanced by historical actions removal. Experiments demonstrate the advantages of Faster-ADNet.

The Machine-to-Machine (M2M) service network platform accommodates M2M communications traffic efficiently by using tree-structured networks and the computation resources deployed on network nodes. In the M2M service network platform, program files required for controlling devices are placed on network nodes, which have different amounts of computation resources according to their position in the hierarchy. The program files must be dynamically repositioned in response to service quality requests from each device, such as computation power, link bandwidth, and latency. This paper proposes a Program File Placement (PFP) method for the M2M service network platform. First, the PFP problem is formulated in the Mixed-Integer Linear Programming (MILP) approach. We prove that the decision version of the PFP problem is NP-complete. Next, we present heuristic algorithms that attain sub-optimal but attractive solutions. Evaluations show that the heuristic algorithm based on the number of devices that share a program file reduces the total number of placed program files compared to the algorithm that moves program files based on their position.

This paper describes the advantages and disadvantages observed when describing complex parameterizable Artificial Neural Networks (ANNs) at the behavioral level using SystemC and at the Register Transfer Level (RTL) using VHDL. ANNs are complex to parameterize because they have a configurable number of layers, and each one of them has a unique configuration. This kind of structure makes ANNs, a priori, challenging to parameterize using Hardware Description Languages (HDL). Thus, it seems intuitively that ANNs would benefit from the raise in level of abstraction from RTL to behavioral level. This paper presents the results of implementing an ANN using both levels of abstractions. Results surprisingly show that VHDL leads to better results and allows a much higher degree of parameterization than SystemC. The implementation of these parameterizable ANNs are made open source and are freely available online. Finally, at the end of the paper we make some recommendation for future HLS tools to improve their parameterization capabilities.

This paper introduces a new noise generation algorithm for vocoder-based speech waveform generation. White noise is generally used for generating an aperiodic component. Since short-term white noise includes a zero-frequency component (ZFC) and inaudible components below 20 Hz, they are reduced in advance when synthesizing. We propose a new noise generation algorithm based on that for velvet noise to overcome the problem. The objective evaluation demonstrated that the proposed algorithm can reduce the unwanted components.

Language models are a key technology in various tasks, such as, speech recognition and machine translation. They are usually used on texts covering various domains and as a result domain adaptation has been a long ongoing challenge in language model research. With the rising popularity of neural network based language models, many methods have been proposed in recent years. These methods can be separated into two categories: model based and feature based adaptation methods. Feature based domain adaptation has compared to model based domain adaptation the advantage that it does not require domain labels in the corpus. Most existing feature based adaptation methods are based on bias adaptation. We propose a novel feature based domain adaptation technique using hidden layer factorisation. This method is fundamentally different from existing methods because we use the domain features to calculate a linear combination of linear layers. These linear layers can capture domain specific information and information common to different domains. In the experiments, we compare our proposed method with existing adaptation methods. The compared adaptation techniques are based on two different ideas, that is, bias based adaptation and gating of hidden units. All language models in our comparison use state-of-the-art long short-term memory based recurrent neural networks. We demonstrate the effectiveness of the proposed method with perplexity results for the well-known Penn Treebank and speech recognition results for a corpus of TED talks.

This paper evaluates the throughput of a distributed antenna network (DAN) with multiple mobile terminal scheduling and the usage of joint maximum-likelihood detection (MLD). Mobile terminals are closer to the desired antennas in the DAN which leads to higher throughput and better frequency utilization efficiency. However, when multiple mobile terminal scheduling is applied to the DAN, interference can occur between transmitted signals from antennas. Therefore, in this research, mobile terminal scheduling along with joint MLD is applied to reduce the effects of interference. A system level simulation shows that the usage of joint MLD in a densely packed DAN provides better system throughput regardless of the numbers of mobile terminals and fading channels.

This paper studies power allocation for Chase combining (CC) hybrid ARQ (HARQ) in block-fading channels, with causal channel state information (CSI) available both at the receiver and transmitter. A best-effort power allocation scheme is proposed to improve the average throughput of CC HARQ. The scheme is formulated as an optimization problem that, for each round, allocating the transmit power to maximize the average incremental information according to the HARQ retransmission status and CSI. By convex optimization, the solution is derived in simple analytical form. At the same time, the HARQ performance metrics including throughput and outage probability are computed by recursive numerical integral. With at most 4 transmission rounds, this best-effort method achieves about 75% of ergodic capacity in independent Rayleigh block fading channels.

Softwarized networks are expected to be utilized as a core network for the 5th Generation (5G) mobile services. For the mobile core network architecture, service chaining is expected to be utilized for dynamically steering traffic across multiple network functions. In this paper, for dynamic multipath service chaining, we propose a greedy-based VNF placement algorithm. This method can provide multipath service chaining so as to utilize the node resources such as CPU effectively while decreasing the cost about bandwidth and transmission delay. The proposed algorithm consists of four difference algorithms, and VNFs are placed appropriately with those algorithm. Our proposed algorithm obtains near optimal solution for the formulated optimization problem with a greedy algorithm, and hence multipath service chains can be provided dynamically. We evaluate the performance of our proposed method with simulation and compare its performance with the performances of other methods. In numerical examples, it is shown that our proposed algorithm can provide multipath service chains appropriately so as to utilize the limited amount of node resources effectively. Moreover, it is shown that our proposed algorithm is effective for providing service chaining dynamically in large-scale network.

Network embedding has attracted an increasing amount of attention in recent years due to its wide-ranging applications in graph mining tasks such as vertex classification, community detection, and network visualization. Network embedding is an important method to learn low-dimensional representations of vertices in networks, aiming to capture and preserve the network structure. Almost all the existing network embedding methods adopt the so-called Skip-gram model in Word2vec. However, as a bag-of-words model, the skip-gram model mainly utilized the local structure information. The lack of information metrics for vertices in global network leads to the mix of vertices with different labels in the new embedding space. To solve this problem, in this paper we propose a Network Representation Learning method with Deep Metric Learning, namely DML-NRL. By setting the initialized anchor vertices and adding the similarity measure in the training progress, the distance information between different labels of vertices in the network is integrated into the vertex representation, which improves the accuracy of network embedding algorithm effectively. We compare our method with baselines by applying them to the tasks of multi-label classification and data visualization of vertices. The experimental results show that our method outperforms the baselines in all three datasets, and the method has proved to be effective and robust.

Multiuser massive multi-input multi-output (MU massive MIMO) is considered as a promising technology for the fifth generation (5G) of the wireless communication system. In this paper, we propose a low-complexity joint antenna and user selection scheme with block diagonalization (BD) precoding for MU massive MIMO downlink channel in the time division duplex (TDD) system. The base station (BS) is equipped with a large-scale transmit antenna array while each user is using the single receive antenna in the system. To reduce the hardware cost, BS will be implemented by limited number of radio frequency (RF) chains and BS must activate some selected transmit antennas in the BS side for data transmitting and some users' receive antennas in user side for data receiving. To achieve the reduction in the computation complexity in the antenna and user selection while maintaining the same or higher sum-rate in the system, the proposed scheme relies on three complexity reduction key factors. The first key factor is that finding the average channel gains for the transmit antenna in the BS side and the receive antenna in the user side to select the best channel gain antennas and users. The second key factor called the complexity control factor ξ(Xi) for the antenna set and the user set limitation is used to control the complexity of the brute force search. The third one is that using the assumption of the point-to-point deterministic MIMO channel model to avoid the singular value decomposition (SVD) computation in the brute force search. We show that the proposed scheme offers enormous reduction in the computation complexity while ensuring the acceptable performance in terms of total system sum-rate compared with optimal and other conventional schemes.

Blind nonlinear compensation for RF receivers is an important research topic in 5G mobile communication, in which higher level modulation schemes are employed more often to achieve high capacity and ultra-broadband services. Since nonlinear compensation circuits must handle intermodulation bandwidths that are more than three times the signal bandwidth, reducing the sampling frequency is essential for saving power consumption. This paper proposes a novel blind nonlinear compensation technique that employs sub-Nyquist sampling analog-to-digital conversion. Although outband distortion spectrum is folded in the proposed sub-Nyquist sampling technique, determination of compensator coefficients is still possible by using the distortion power. Proposed technique achieves almost same compensation performance in EVM as the conventional compensation scheme, while reducing sampling speed of analog to digital convertor (ADC) to less than half the normal sampling frequency. The proposed technique can be applied in concurrent dual-band communication systems and adapt to flat Rayleigh fading environments.