Haruka SUZUKI Marco HERNANDEZ Ryuji KOHNO
This paper presents hybrid type-II automatic repeat request (H-ARQ) for wireless wearable body area networks (BANs) based on ultra wideband (UWB) technology. The proposed model is based on three schemes, namely, high rate optimized rate compatible punctured convolutional codes (HRO-RCPC), Reed Solomon (RS) invertible codes and their concatenation. Forward error correction (FEC) coding is combined with simple cyclic redundancy check (CRC) error detection. The performance is investigated for two channels: CM3 (on-body to on-body) and CM4 (on-body to a gateway) scenarios of the IEEE802.15.6 BAN channel models for BANs. It is shown that the improvement in performance in terms of throughput and error protection robustness is very significant. Thus, the proposed H-ARQ schemes can be employed and optimized to suit medical and non-medical applications. In particular we propose the use of FEC coding for non-medical applications as those require less stringent quality of service (QoS), while the incremental redundancy and ARQ configuration is utilized only for medical applications. Thus, higher QoS is guaranteed for medical application of BANs while allowing coexistence with non-medical applications.
Jing-Wei LIU Moshaddique Al AMEEN Kyung-Sup KWAK
Network life time and hence device life time is one of the fundamental metrics in wireless body area networks (WBAN). To prolong it, especially those of implanted sensors, each node must conserve its energy as much as possible. While a variety of wake-up/sleep mechanisms have been proposed, the wake-up radio potentially serves as a vehicle to introduce vulnerabilities and attacks to WBAN, eventually resulting in its malfunctions. In this paper, we propose a novel secure wake-up scheme, in which a wake-up authentication code (WAC) is employed to ensure that a BAN Node (BN) is woken up by the correct BAN Network Controller (BNC) rather than unintended users or malicious attackers. The scheme is thus particularly implemented by a two-radio architecture. We show that our scheme provides higher security while consuming less energy than the existing schemes.
Xianmin CHEN Peilin LIU Dajiang ZHOU Jiayi ZHU Xingguang PAN Satoshi GOTO
Motion compensation is widely used in many video coding standards. Due to its bandwidth requirement and complexity, motion compensation is one of the most challenging parts in the design of high definition video decoder. In this paper, we propose a high performance and low bandwidth motion compensation design, which supports H.264/AVC, MPEG-1/2 and Chinese AVS standards. We introduce a 2-Dimensional cache that can greatly reduce the external bandwidth requirement. Similarities among the 3 standards are also explored to reduce hardware cost. We also propose a block-pipelining strategy to conceal the long latency of external memory access. Experimental results show that our motion compensation design can reduce the bandwidth by 74% in average and it can real-time decode 1920x1088@30 fps video stream at 80 MHz.
This study investigates a band extension technique for narrow-band telephony speech. The proposed technique employs full wave rectification that nonlinearly generates high-band overtones from the low band. In order to improve the conventional technique, this study investigates a frame-by-frame gain control based on the estimation of gain parameter from narrow-band telephony speech. A subjective evaluation indicates that the proposed technique outperforms the conventional technique.
Performance of band-limited baseband synchronous CDMA using orthogonal Independent Component Analysis (ICA) spreading sequences is investigated. The orthogonal ICA sequences have an orthogonality condition in a synchronous CDMA like the Walsh-Hadamard sequences. Furthermore, these have useful correlation properties like the Gold sequences. These sequences are obtained easily by using the ICA which is one of the brain-style signal processing algorithms. In this study, the ICA is used not as a separator for received signal but as a generator of spreading sequences. The performance of the band-limited synchronous CDMA using the orthogonal ICA sequences is compared with the one using the Walsh-Hadamard sequences. For limiting bandwidth, a Root Raised Cosine filter (RRC) is used. We investigate means and variances of correlation outputs after passing the RRC filter and the Bit Error Rates (BERs) of the system in additive white Gaussian noise channel by numerical simulations. It is found that the BER in the band-limited system using the orthogonal ICA sequences is much lower than the one using the Walsh-Hadamard sequences statistically.
Megumi SHIBUYA Tomohiko OGISHI Shu YAMAMOTO
P2P (Peer-to-Peer) file sharing architectures have scalable and cost-effective features. Hence, the application of P2P architectures to media streaming is attractive and expected to be an alternative to the current video streaming using IP multicast or content delivery systems because the current systems require expensive network infrastructures and large scale centralized cache storage systems. In this paper, we investigate the P2P progressive download enabling Internet video streaming services. We demonstrated the capability of the P2P progressive download in both laboratory test network as well as in the Internet. Through the experiments, we clarified the contribution of the FTTH links to the P2P progressive download in the heterogeneous access networks consisting of FTTH and ADSL links. We analyzed the cause of some download performance degradation occurred in the experiment and discussed about the effective methods to provide the video streaming service using P2P progressive download in the current heterogeneous networks.
Xiao PENG Zhixiang CHEN Xiongxin ZHAO Fumiaki MAEHARA Satoshi GOTO
Since the structured quasi-cyclic low-density parity-check (QC-LDPC) codes for most modern wireless communication systems include multiple code rates, various block lengths, and the corresponding different sizes of submatrices in parity check matrix (PCM), the reconfigurable LDPC decoder is desirable and the permutation network is needed to accommodate any input number (IN) and shift number (SN) for cyclic shift. In this paper, we propose a novel permutation network architecture for the reconfigurable QC-LDPC decoders based on Banyan network. We prove that Banyan network has the nonblocking property for cyclic shift when the IN is power of 2, and give the control signal generating algorithm. Through introducing the bypass network, we put forward the nonblocking scheme for any IN and SN. In addition, we present the hardware design of the control signal generator, which can greatly reduce the hardware complexity and latency. The synthesis results using the TSMC 0.18 µm library demonstrate that the proposed permutation network can be implemented with the area of 0.546 mm2 and the frequency of 292 MHz.
Masahiko JINNO Yukio TSUKISHIMA Hidehiko TAKARA Bartlomiej KOZICKI Yoshiaki SONE Toshikazu SAKANO
A virtualized optical network (VON) is proposed as a key to implementing increased agility and flexibility into the future Internet and applications by providing any-to-any connectivity with the appropriate optical bandwidth at the appropriate time. The VON is enabled by introducing optical transparentization and optical fine granular grooming based on optical orthogonal frequency division multiplexing.
The selection of effective features is especially important in achieving highly accurate speech recognition. Although the mel-cepstrum is a popular and effective feature for speech recognition, it is still unclear that the filterbank adopted in the mel-cepstrum always produces the optimal performance regardless of the phonetic environment of any specific speech recognition task. In this paper, we propose a new cepstral domain feature extraction approach utilizing the entropic distance-based filterbank for highly accurate speech recognition. Experimental results showed that the cepstral features employing the proposed filterbank reduce the relative error by 31% for clean as well as noisy speech compared to the mel-cepstral features.
A band-pass bilateral filter is an improved variant of a bilateral filter that does not have low-pass characteristics but has band-pass characteristics. Unfortunately, its computation time is relatively large since all pixels are subjected to Gaussian calculation. To solve this problem, we pay attention to a nonlinear filter called ε-filter and propose an advanced ε-filter labeled band-pass ε-filter. As ε-filter has low-pass characteristics due to spatial filtering, it does not enhance the image contrast. On the other hand, band-pass ε-filter does not have low-pass characteristics but has band-pass characteristics to enhance the image contrast around edges unlike ε-filter. The filter works not only as a noise reduction filter but also as an edge detection filter depending on the filter setting. Due to its simple design, the calculation cost is relatively small compared to the band-pass bilateral filter. To show the effectiveness of the proposed method, we report the results of some comparison experiments on the filter characteristics and computational cost.
Junrong GU Jae Ho HWANG Ning HAN Jae Moung KIM
This paper proposes an optimized phase rotation sequence method for side lobe suppression by complementing and regulating the side lobe suppression sequence set. The sequence set is efficiently enhanced through the quadratically constrained least square model. The theoretical suppression performance of our method is discussed. Furthermore, our scheme is also suitable for cognitive radio, which is analyzed in the simulation part. The simulation results confirm the effectiveness of our schemes.
Takao KIHARA Toshimasa MATSUOKA Kenji TANIGUCHI
Previously reported wideband CMOS low-noise amplifiers (LNAs) have difficulty in achieving both wideband input impedance matching and low noise performance at low power consumption and low supply voltage. We present a transformer noise-canceling wideband CMOS LNA based on a common-gate topology. The transformer, composed of the input and shunt-peaking inductors, partly cancels the noise originating from the common-gate transistor and load resistor. The combination of the transformer with an output series inductor provides wideband input impedance matching. The LNA designed for ultra-wideband (UWB) applications is implemented in a 90 nm digital CMOS process. It occupies 0.12 mm2 and achieves |S11|<-10 dB, NF<4.4 dB, and |S21|>9.3 dB across 3.1-10.6 GHz with a power consumption of 2.5 mW from a 1.0 V supply. These results show that the proposed topology is the most suitable for low-power and low-voltage UWB CMOS LNAs.
This paper proposes a new realization technique of image rejection function by noise-coupling architecture, which is used for a complex bandpass ΔΣAD modulator. The complex bandpass ΔΣAD modulator processes just input I and Q signals, not image signals, and the AD conversion can be realized with low power dissipation. It realizes an asymmetric noise-shaped spectra, which is desirable for such low-IF receiver applications. However, the performance of the complex bandpass ΔΣAD modulator suffers from the mismatch between internal analog I and Q paths. I/Q path mismatch causes an image signal, and the quantization noise of the mirror image band aliases into the desired signal band, which degrades the SQNDR (Signal to Quantization Noise and Distortion Ratio) of the modulator. In our proposed modulator architecture, an extra notch for image rejection is realized by noise-coupled topology. We just add some passive capacitors and switches to the modulator; the additional integrator circuit composed of an operational amplifier in the conventional image rejection realization is not necessary. Therefore, the performance of the complex modulator can be effectively raised without additional power dissipation. We have performed simulation with MATLAB to confirm the validity of the proposed architecture. The simulation results show that the proposed architecture can achieve the realization of image-rejection effectively, and improve the SQNDR of the complex bandpass ΔΣAD modulator.
Young Ik SON Goo-Jong JEONG In Hyuk KIM
Disturbance attenuation for a class of time-delay systems is performed by a combined simple adaptive control (SAC) with a new configuration of disturbance observer (DOB). The nominal system results from the Pade approximation, which is in the form of a non-minimum phase LTI system. For the implementation of SAC and DOB, two parallel feedforward compensators (PFC) are designed with the inverses of PD- and PID-controller, respectively. Simulation results show the effectiveness of the proposed controller to compensate the disturbance response and uncertain delay time.
Vishal V. KULKARNI Hiroki ISHIKURO Tadahiro KURODA
A CMOS wireless transceiver operating in the 14-18 GHz range is proposed. The receiver uses direct conversion architecture for demodulation with a fast carrier and symbol timing recovery scheme. The transmitter uses a PLL and an up-conversion mixer to generate BPSK modulated signal. A ring oscillator is used in the PLL to make faster switching for burst transmission obtaining high speed low power operation. The transceiver operation has been verified by system simulation while the transmitter test-chip was fabricated in 65 nm CMOS technology and verified with measured results. The transmitter generates a bi-phase modulated signal with a center frequency of 16 GHz at a maximum data rate of 4 Gb/s and consumes 61 mW of power. To the best knowledge of authors, this is lowest power consumption among the reported transmitters that operate over 1 Gb/s range. The transceiver is proposed for a target communication distance of 10 cm.
Ai-ichiro SASAKI Akinori FURUYA Mitsuru SHINAGAWA
We propose a novel short-range wireless communications technology that uses quasi-static electric fields; it enables data communication between devices separated by up to 10 cm via dielectric media at a speed of 10 Mbps. It is considered to be a secure wireless technology since communication area is restricted to below about 10 cm. To suppress electromagnetic radiation, we adopted a baseband transmission scheme in which the quasi-static electric field is directly modulated by 10 BASE-T data signals. Since the spectra of the data signals are concentrated to below 20 MHz, the amplitude of the electric field rapidly decreases outside the communication area. This contributes to enhancing security of the communications system. In this paper, we explain a basic principle of the short-range wireless communications technology. Since baseband data signals are carried by the quasi-static electric field, the quality of the communication is easily degraded by the existence of the earth ground. To isolate the communications system from the earth ground, we introduce a novel electro-optic sensor to receive the quasi-static electric field. With the electro-optic sensor, stable data communication is possible at 10 Mbps via dielectric materials, such as a wooden table.
Joo-Young LEE Young-In SONG Hae-Chang RIM Kyoung-Soo HAN
In this paper, we suggest a new probabilistic model of semantic role labeling, which uses the frameset of the predicate as explicit linguistic knowledge for providing global information on the predicate-argument structure that local classifier is unable to catch. The proposed model consists of three sub-models: role sequence generation model, frameset generation model, and matching model. The role sequence generation model generates the semantic role sequence candidates of a given predicate by using the local classification approach, which is a widely used approach in previous research. The frameset generation model estimates the probability of each frameset that the predicate can take. The matching model is designed to measure the degree of the matching between the generated role sequence and the frameset by using several features. These features are developed to represent the predicate-argument structure information described in the frameset. In the experiments, our model shows that the use of knowledge about the predicate-argument structure is effective for selecting a more appropriate semantic role sequence.
Osamu SHIMADA Akihiko SUGIYAMA Toshiyuki NOMURA
This paper proposes a low complexity noise suppressor with hybrid filterbanks and adaptive time-frequency tiling. An analysis hybrid filterbank provides efficient transformation by further decomposing low-frequency bins after a coarse transformation with a short frame size. A synthesis hybrid filterbank also reduces computational complexity in a similar fashion to the analysis hybrid filterbank. Adaptive time-frequency tiling reduces the number of spectral gain calculations. It adaptively generates tiling information in the time-frequency plane based on the signal characteristics. The average number of instructions on a typical DSP chip has been reduced by 30% to 7.5 MIPS in case of mono signals sampled at 44.1 kHz. A Subjective test result shows that the sound quality of the proposed method is comparable to that of the conventional one.
A high performance highly integrated sub-GHz wideband differential low-noise amplifier (LNA) for terrestrial and cable digital TV tuner applications is realized in 0.18 µm CMOS technology. A noise-canceling topology using a feed-forward current reuse common-source stage is presented to obtain low noise characteristics and high gain while achieving good wideband input matching within 48-860 MHz. In addition, linearization methods are appropriately utilized to improve the linearity. The implemented LNA achieves a power gain of 20.9 dB, a minimum noise figure of 2.8 dB, and an OIP3 of 24.2 dBm. The chip consumes 32 mA of current at 1.8 V power supply and the core die size is 0.21 mm2.
Eunju HWANG Kyung Jae KIM Frank ROIJERS Bong Dae CHOI
In the centralized polling mode in IEEE 802.16e, a base station (BS) polls mobile stations (MSs) for bandwidth reservation in one of three polling modes; unicast, multicast, or broadcast pollings. In unicast polling, the BS polls each individual MS to allow to transmit a bandwidth request packet. This paper presents an analytical model for the unicast polling of bandwidth request in IEEE 802.16e networks over Gilbert-Elliot error channel. We derive the probability distribution for the delay of bandwidth requests due to wireless transmission errors and find the loss probability of request packets due to finite retransmission attempts. By using the delay distribution and the loss probability, we optimize the number of polling slots within a frame and the maximum retransmission number while satisfying QoS on the total loss probability which combines two losses: packet loss due to the excess of maximum retransmission and delay outage loss due to the maximum tolerable delay bound. In addition, we obtain the utilization of polling slots, which is defined as the ratio of the number of polling slots used for the MS's successful transmission to the total number of polling slots used by the MS over a long run time. Analysis results are shown to well match with simulation results. Numerical results give examples of the optimal number of polling slots within a frame and the optimal maximum retransmission number depending on delay bounds, the number of MSs, and the channel conditions.