Toshihide TOSAKA Yukio YAMANAKA
The data dispersion of the measurement of electromagnetic disturbance above 1 GHz is mainly affected by site imperfections (expressed by the site voltage standing wave ratio (SVSWR)). To confirm the relationship between site imperfections and the measured field strength, we measured the SVSWR and the field strength radiated from the equipment under test (EUT) by changing the area covered by the RF absorber on the metal ground plane. From the results, we found that the data dispersion of measured field strength can be estimated from the measured SVSWR, and therefore, we can determine the measurement uncertainty of the measured field strength at the test site.
Jisu KIM Jee-Hwan SONG Seung-Hyuk KANG Sei-Seung YOON Seong-Ook JUNG
Spin-torque transfer magnetic random access memory (STT-MRAM) is a promising technology for next generation nonvolatile universal memory because it reduces the high write current required by conventional MRAM and enables write current scaling as technology becomes smaller in size. However, the sensing margin is not improved in STT-MRAM and tends to decrease with technology scaling due to the lowered supply voltage and increased process variation. Moreover, read disturbance, which is an unwanted write in a read operation, can occur in STT-MRAM because its read and write operations use the same path. To overcome these problems, we present a load-line analysis method, which is useful for systematically analyzing the impacts of transistor size and gate voltage of MOSFETs on the sensing margin, and also propose an optimization procedure for the commonly applicable MRAM sensing circuits. This methodology constitutes an effective means to optimize the transistor size and gate voltage of MOSFETs and thus maximizes the sensing margin without causing read disturbance.
Jinwon CHOI Yu-Suk SUNG Yong-Hwa KIM Seong-Cheol KIM
This letter proposes an Ultra WideBand (UWB) channel gain estimation algorithm that is based on frequency response correlation. From data measured in indoor and outdoor environments, the frequency correlation statistics of the UWB channel are characterized by correlation coefficients, which are represented as functions of the frequency separation according to the propagation environments. We use empirically established correlation coefficient models to develop the proposed channel gain estimation algorithm. In this algorithm, unknown channel gains of intermediate frequencies are estimated from known channel gains of neighboring reference frequencies. The performance of the proposed algorithm is evaluated against various configurations of reference frequencies and compared with that of a conventional estimation algorithm using a linear interpolation scheme.
Somboon THEERAWISITPONG Toshitatsu SUZUKI Noboru MORITA Yozo UTSUMI
The design of microstrip bandpass filters using stepped-impedance resonators (SIRs) is examined. The passband center frequency for the WCDMA-FDD (uplink band) Japanese cellular system is 1950 MHz with a 60-MHz bandwidth. The SIR physical characteristic can be designed using a SIR characteristic chart based on second harmonic suppression. In our filter design, passband design charts were obtained through the design procedure. Tchebycheff and maximally flat bandpass filters of any bandwidth and any number of steps can be designed using these passband design charts. In addition, sharp skirt characteristics in the passband can be realized by having two transmission zeros at both adjacent frequency bands by using open-ended quarter-wavelength stubs at input and output ports. A new even-mode harmonics suppression technique is proposed to enable a wide rejection band having a high suppression level. The unloaded quality factor of the resonator used in the proposed filters is greater than 240.
Po-Hung CHEN Min-Chiao CHEN Chun-Lin KO Chung-Yu WU
A direct-conversion receiver integrated with the CMOS subharmonic frequency tripler (SFT) for V-band applications is designed, fabricated and measured using 0.13-µm CMOS technology. The receiver consists of a low-noise amplifier, a down-conversion mixer, an output buffer, and an SFT. A fully differential SFT is introduced to relax the requirements on the design of the frequency synthesizer. Thus, the operational frequency of the frequency synthesizer in the proposed receiver is only 20 GHz. The fabricated receiver has a maximum conversion gain of 19.4 dB, a minimum single-side band noise figure of 10.2 dB, the input-referred 1-dB compression point of -20 dBm and the input third order inter-modulation intercept point of -8.3 dB. It draws only 15.8 mA from a 1.2-V power supply with a total chip area of 0.794 mm0.794 mm. As a result, it is feasible to apply the proposed receiver in low-power wireless transceiver in the V-band applications.
Lechang LIU Zhiwei ZHOU Takayasu SAKURAI Makoto TAKAMIYA
A low power impulse radio ultra-wideband (IR-UWB) receiver for DC-960 MHz band is proposed in this paper. The proposed receiver employs multiple DC power-free charge-domain sampling correlators to eliminate the need for phase synchronization. To alleviate BER degradation due to an increased charge injection in a subtraction operation in the sampling correlator than that of an addition operation, a comparator with variable threshold (=offset) voltage is used, which enables an addition-only operation. The developed receiver fabricated in 1.2 V 65 nm CMOS achieves the lowest energy consumption of 17.6 pJ/bit at 100 Mbps in state-of-the-art correlation-based UWB receivers.
Muhammad Mahbub ALAM Md. Abdul HAMID Md. Abdur RAZZAQUE Choong Seon HONG
Broadband wireless access networks are promising technology for providing better end user services. For such networks, designing a scheduling algorithm that fairly allocates the available bandwidth to the end users and maximizes the overall network throughput is a challenging task. In this paper, we develop a centralized fair scheduling algorithm for IEEE 802.16 mesh networks that exploits the spatio-temporal bandwidth reuse to further enhance the network throughput. The proposed mechanism reduces the length of a transmission round by increasing the number of non-contending links that can be scheduled simultaneously. We also propose a greedy algorithm that runs in polynomial time. Performance of the proposed algorithms is evaluated by extensive simulations. Results show that our algorithms achieve higher throughput than that of the existing ones and reduce the computational complexity.
Ilsun YOU Jong-Hyouk LEE Kouichi SAKURAI Yoshiaki HORI
Fast Handover for Hierarchical Mobile IPv6 (F-HMIPv6) that combines advantages of Fast Handover for Mobile IPv6 (FMIPv6) and Hierarchical Mobile IPv6 (HMIPv6) achieves the superior performance in terms of handover latency and signaling overhead compared with previously developed mobility protocols. However, without being secured, F-HMIPv6 is vulnerable to various security threats. In 2007, Kang and Park proposed a security scheme, which is seamlessly integrated into F-HMIPv6. In this paper, we reveal that Kang-Park's scheme cannot defend against the Denial of Service (DoS) and redirect attacks while largely relying on the group key. Then, we propose an Enhanced Security Scheme for F-HMIPv6 (ESS-FH) that achieves the strong key exchange and the key independence as well as addresses the weaknesses of Kang-Park's scheme. More importantly, it enables fast handover between different MAP domains. The proposed scheme is formally verified based on BAN-logic, and its handover latency is analyzed and compared with that of Kang-Park's scheme.
Logan VOLKERS Neil BARAKAT Thomas DARCIE
DOCSIS is the defacto industry standard for cable internet to the home. In this letter, we examine the delay characteristics of commercially deployed DOCSIS networks. We focus on four mechanisms of the DOCSIS MAC operation and develop a computationally simple simulator to reproduce the phenomena produced by these mechanisms. In reproducing these phenomena using our simulator, we demonstrate that the simulator properly encapsulates the core mechanisms of DOCSIS and effectively simulates the delay of packets.
Satoshi YAMAGUCHI Hiroaki MIYASHITA Toru TAKAHASHI Masataka OTSUKA Yoshihiko KONISHI
Owing to their ultra-wideband characteristics, tapered slot antennas (TSAs) are used as element antennas in wideband phased arrays. However, when the size of a TSA is reduced in order to prevent the generation of a grating lobe during wide-angle beam scanning, the original ultra-wideband characteristics are degraded because of increased reflections from the ends of the tapered slot aperture. To overcome this difficulty, we propose a new antenna structure in which parallel-plate waveguides are added to the TSA. The advantage of this new structure is that the reflection characteristics of individual antenna elements are not degraded even if the width of the antenna aperture is very small, i.e., approximately one-half the wavelength of the highest operating frequency. In this study, we propose a procedure for designing the new antenna through numerical simulations by using the FDTD method. In addition, we verify the performance of the antenna array by experiments.
Thai Hoa DUONG Kye San LEE Ihn S. KIM
In this paper, we utilize low temperature co-fired ceramic technology (LTCC) to realize a modified short-circuited stub bandpass filter suitable for ultra-wideband (UWB) applications. By modifying the conventional short-circuited stub bandpass filter structure with stubs and connecting lines of lower characteristic impedances, the number of stubs has been reduced from 5 to 2 on a high dielectric constant substrate (∈ r = 40). A wireless local area network (WLAN) stopband in the frequency range of 5.15 to 5.825 GHz has been inserted into the filter characteristic using three short-circuited coupled lines. The filter is fabricated and measurement results show that it has an insertion loss less than 1.0 dB and return loss better than 10 dB in the pass bands. A bandwidth ratio of 109.49% has been achieved. Measurement results agree well with simulation results. The dimensions of the filter are 480.57 mm3.
This paper presents effective and efficient implementation techniques for DMA buffer overflow elimination on the Cell Broadband EngineTM (Cell/B.E.) processor. In the Cell/B.E. programming model, application developers manually issue DMA commands to transfer data from the system memory to the local memories of the Cell/B.E. cores. Although this allows us to eliminate cache misses or cache invalidation overhead, it requires careful management of the buffer arrays for DMA in the application programs to prevent DMA buffer overflows. To guard against DMA buffer overflows, we introduced safe DMA handling functions for the applications to use. To improve and minimize the performance overhead of buffer overflow prevention, we used three different optimization techniques that take advantage of SIMD operations: branch-hint-based optimizations, jump-table-based optimizations and self-modifying-based optimizations. Our optimized implementation prevents all DMA buffer overflows with minimal performance overhead, only 2.93% average slowdown in comparison to code without the buffer overflow protection.
Yihong ZHOU Jiayin LI Haiyan JIN Haiyang WANG
A novel resonant four-way divider/combiner based on finline is presented and studied. This divider/combiner designed in 34-36 GHz is composed of new probe coupling units between finline to microstrip lines. The measured power-combining efficiency of this circuit at 34.85 GHz is 83%.
John R. FARSEROTU John F.M. GERRITS Jerome ROUSSELOT
This paper provides an overview of CSEMs FM-UWB PHY-MAC proposal to IEEE802.15.6, Task Group 6, Body Area Networks. The proposed solution provides for an ultra low power, yet robust and reliable solution for low data rate medical BAN. The paper examines the key features and performance aspects of the proposal.
Jing-Wei LIU Moshaddique Al AMEEN Kyung-Sup KWAK
Network life time and hence device life time is one of the fundamental metrics in wireless body area networks (WBAN). To prolong it, especially those of implanted sensors, each node must conserve its energy as much as possible. While a variety of wake-up/sleep mechanisms have been proposed, the wake-up radio potentially serves as a vehicle to introduce vulnerabilities and attacks to WBAN, eventually resulting in its malfunctions. In this paper, we propose a novel secure wake-up scheme, in which a wake-up authentication code (WAC) is employed to ensure that a BAN Node (BN) is woken up by the correct BAN Network Controller (BNC) rather than unintended users or malicious attackers. The scheme is thus particularly implemented by a two-radio architecture. We show that our scheme provides higher security while consuming less energy than the existing schemes.
Gia Khanh TRAN Nguyen Dung DAO Kei SAKAGUCHI Kiyomichi ARAKI Hiroshi IWAI Tsutomu SAKATA Koichi OGAWA
This paper illustrates a large-scale MIMO propagation channel measurement in a real life environment and evaluates throughput performance of various MIMO schemes in that environment. For that purpose, 44 MIMO transceivers and a novel spatial scanner are fabricated for wideband MIMO channel measurements in the 5 GHz band. A total of more than 50,000 spatial samples in an area of 150 m2, which includes a bedroom, a Japanese room, a hallway, and the living and dining areas, are taken in a real residential home environment. Statistical properties of the propagation channel and throughput performance of various MIMO schemes are evaluated by using measured data. Propagation measurement results show large dynamic channel variations occurring in a real environment in which statistical properties of the channel, such as frequency correlation and spatial correlation are not stationary any more, and become functions of the SNR. Furthermore, evaluation of throughput shows that although MIMO schemes outperform the SISO system in most areas, open loop systems perform badly in the far areas with low SNR. Paying for the cost of CSI or partial CSI at Tx, closed loop and hybrid systems have superior performance compared to other schemes, especially in reasonable SNR areas ranging from 10 dB to 30 dB. Spatial correlation, which is common in Japanese wooden residences, is also found to be a dominant factor causing throughput degradation of the open loop MIMO schemes.
Ultra wideband (UWB) on-body communication is attracting much attention in biomedical applications. In this paper, the performance of UWB on-body communication is investigated based on a statistically extracted on-body channel model, which provides detailed characteristics of the multi-path-affected channel with an emphasis on various body postures or body movement. The possible data rate, the possible communication distance, as well as the bit error rate (BER) performance are clarified via computer simulation. It is found that the conventional correlation receiver is incompetent in the multi-path-affected on-body channel, while the RAKE receiver outperforms the conventional correlation receiver at a cost of structure complexity. Different RAKE receiver structures are compared to show the improvement of the BER performance.
Eddy TAILLEFER Shoichi KITAZAWA Masazumi UEBA
We propose a proof-of-concept of a switchable multi-frequency MMIC (monolithic microwave integrated circuit) oscillator device, operating in the 60 GHz millimeter wave band, which is implemented in GaAs p-HEMT transistor technology. Oscillators that can switch between two frequencies have been designed, fabricated and evaluated. The oscillator uses a cross-coupled FET topology, combined with a bent asymmetric coplanar stripline for the resonator, and a switched-capacitor for the frequency switching components. The oscillator generates two oscillations at f/2 and f where f is the target frequency of around 60 GHz. The switchable oscillator has been demonstrated for the range of frequency from 44 GHz to 68.9 GHz. Moreover, the designed oscillator exhibits a wide-band negative resistance property that allows fabricating switchable oscillators covering the 50 to 75 GHz V-band. An evaluated switchable oscillator delivers -17.09 dBm and -13.72 dBm output power at 62.45 GHz and 64.78 GHz, for a supplied power of 40.6 mW and 39.1 mW, respectively.
Takahiro AOYAGI Kenichi TAKIZAWA Takehiko KOBAYASHI Jun-ichi TAKADA Kiyoshi HAMAGUCHI Ryuji KOHNO
An implantable WBAN path-loss model for a capsule endoscopy which is used for examining digestive organs, is developed by conducting simulations and experiments. First, we performed FDTD simulations on implant WBAN propagation by using a numerical human model. Second, we performed FDTD simulations on a vessel that represents the human body. Third, we performed experiments using a vessel of the same dimensions as that used in the simulations. On the basis of the results of these simulations and experiments, we proposed the gradient and intercept parameters of the simple path-loss in-body propagation model.
Kaikai CHI Xiaohong JIANG Baoliu YE Susumu HORIGUCHI
Recently, network coding has been applied to the loss recovery of reliable multicast in wireless networks, where multiple lost packets are XOR-ed together as one packet and forwarded via single retransmission, resulting in a significant reduction of bandwidth consumption. In this paper, we first prove that maximizing the number of lost packets for XOR-ing, which is the key part of the available network coding-based reliable multicast schemes, is actually a complex NP-complete problem. To address this limitation, we then propose an efficient heuristic algorithm for finding an approximately optimal solution of this optimization problem. Furthermore, we show that the packet coding principle of maximizing the number of lost packets for XOR-ing sometimes cannot fully exploit the potential coding opportunities, and we then further propose new heuristic-based schemes with a new coding principle. Simulation results demonstrate that the heuristic-based schemes have very low computational complexity and can achieve almost the same transmission efficiency as the current coding-based high-complexity schemes. Furthermore, the heuristic-based schemes with the new coding principle not only have very low complexity, but also slightly outperform the current high-complexity ones.