Boundary-based corner detection has been widely applied in spline curve fitting, automated optical inspection, image segmentation, object recognition, etc. In order to obtain good results, users usually need to adjust the length of region of support to resist zigzags due to quantization and random noise on digital boundaries. To automatically determine the length of region of support for corner detection, Teh-Chin and Guru-Dinesh presented adaptive approaches based on some local properties of boundary points. However, these local-property based approaches are sensitive to noise. In this paper, we propose a new approach to find the optimum length of region of support for corner detection based on a statistic discriminant criterion. Since our approach is based on the global perspective of all boundary points, rather than the local properties of some points, the experiments show that the determined length of region of support increases as the noise intensity strengthens. In addition, the detected corners based on the optimum length of region of support are consistent with human experts' judgment, even for noisy boundaries.

Location Based Services (LBS) are expected to become one of the major drivers of ubiquitous services due to recent inception of GPS-enabled mobile devices, the development of Web2.0 paradigm, and emergence of 3G broadband networks. Having this vision in mind, Community Context-attribute-oriented Collaborative Information Environment (CCCIE) based Autonomous Decentralized Community System (ADCS) is proposed to enable provision of services to specific users in specific place at specific time considering various context-attributes. This paper presents autonomous community construction technology that share service discovered by one member among others in flexible way to improve timeliness and reduce network cost. In order to meet crucial goal of real-time and context-aware community construction (provision of service/ service information to users with common interests), and defining flexible service area in highly dynamic operating environment of ADCS, proposed progressive ripple based service discovery technique introduces novel idea of snail's pace and steady advancing search followed by swift boundary confining mechanism; while service area construction shares the discovered service among members in defined area to further improve timeliness and reduce network cost. Analysis and empirical results verify the effectiveness of the proposed technique.

To support mobile multicasting in wireless networks, we present a new active multicasting mechanism which makes use of the state characteristic of multicast agent. In this mechanism, a multicast agent just locates the position for roaming hosts when it does not forward multicast packets. Upon reception of multicast packets, the multicast agent adjusts the service range to achieve an appropriate balance between routing efficiency and the overhead of multicast tree reconstruction. Therefore, a lot of unnecessary tree reconstructions are eliminated during the time when none multicast packet is transferred and multicast delivery path is near optimal because of the limited service range of multicast agent in the active state. To justify the effectiveness of our proposed scheme, we develop an analytical model to evaluate the signaling overhead. Our performance analysis shows that the proposed scheme can significantly reduce the system overhead and multicast routing is near optimal. The other important contribution is the novel analytical approach in evaluating the performance of mobile multicast routing protocol.

A new random access channel (RACH) preamble detection scheme using variable coherent correlation intervals (CCIs) is proposed. It is shown first that it is enough to employ two CCIs for supporting a user equipment (UE) velocity of 300 km/h, and then a CCI selection criterion is proposed. Computer simulation results indicate that the proposed scheme can provide a robust detection performance in time-varying fading channel environments.

Networking technologies have recently been evolving and network applications are now expected to support flexible composition of upper-layer network services, such as security, QoS, or personal firewall. We propose a multi-platform framework called FreeNA* that extends existing applications by incorporating the services based on user definitions. This extension does not require users to modify their systems at all. Therefore, FreeNA is valuable for experimental system usage. We implemented FreeNA on both Linux and Microsoft Windows operating systems, and evaluated their functionality and performance. In this paper, we describe the design and implementation of FreeNA including details on how to insert network services into existing applications and how to create services in a multi-platform environment. We also give an example implementation of a service with SSL, a functionality comparison with relevant systems, and our performance evaluation results. The results show that FreeNA offers finer configurability, composability, and usability than other similar systems. We also show that the throughput degradation of transparent service insertion is 2% at most compared with a method of directly inserting such services into applications.

The notion of anonymous signatures has recently been formalized by [18], which captures an interesting property that a digital signature can sometimes hide the identity of the signer, if the message is hidden from the verifier. However, in many practical applications, e.g., an anonymous paper review system mentioned in [18], the message for anonymous authentication is actually known to the verifier. This implies that the effectiveness of previous anonymous signatures may be unjustified in these applications. In this paper, we extend the previous models, and develop a related primitive called strong anonymous signatures. For strong anonymous signatures, the identity of the signer remains secret even if the challenge message is chosen by an adversary. We then demonstrate some efficient constructions and prove their security in our model.

Network intrusion detection systems rely on a signature-based detection engine. When under attack or during heavy traffic, the detection engines need to make a fast decision whether a packet or a sequence of packets is normal or malicious. However, if packets have a heavy payload or the system has a great deal of attack patterns, the high cost of payload inspection severely diminishes detection performance. Therefore, it would be better to avoid unnecessary payload scans by checking the protocol fields in the packet header, before executing their heavy operations of payload inspection. When payload inspection is necessary, it is better to compare a minimum number of attack patterns. In this paper, we propose new methods to classify attack signatures and make pre-computed multi-pattern groups. Based on IDS rule analysis, we grouped the signatures of attack rules by a multi-dimensional classification method adapted to a simplified address flow. The proposed methods reduce unnecessary payload scans and make light pattern groups to be checked. While performance improvements are dependent on a given networking environment, the experimental results with the DARPA data set and university traffic show that the proposed methods outperform the most recent Snort by up to 33%.

In the near future, wireless local area networks (WLANs) will overlap to provide continuous coverage over a wide area. In such ubiquitous WLANs, a mobile node (MN) moving freely between multiple access points (APs) requires not only permanent access to the Internet but also continuous communication quality during handover. In order to satisfy these requirements, an MN needs to (1) select an AP with better performance and (2) execute a handover seamlessly. To satisfy requirement (2), we proposed a seamless handover method in a previous study. Moreover, in order to achieve (1), the Received Signal Strength Indicator (RSSI) is usually employed to measure wireless link quality in a WLAN system. However, in a real environment, especially if APs are densely situated, it is difficult to always select an AP with better performance based on only the RSSI. This is because the RSSI alone cannot detect the degradation of communication quality due to radio interference. Moreover, it is important that AP selection is completed only on an MN, because we can assume that, in ubiquitous WLANs, various organizations or operators will manage APs. Hence, we cannot modify the APs for AP selection. To overcome these difficulties, in the present paper, we propose and implement a proactive AP selection method considering wireless link condition based on the number of frame retransmissions in addition to the RSSI. In the evaluation, we show that the proposed AP selection method can appropriately select an AP with good wireless link quality, i.e., high RSSI and low radio interference.

When we design a robust vector quantizer (VQ) for noisy channels, an appropriate index assignment function should be contrived to minimize the channel-error effect. For relatively high rates, the complexity for finding an optimal index assignment function is too high to be implemented. To overcome such a problem, we use a structurally constrained VQ, which is called the sample-adaptive product quantizer (SAPQ) [12], for low complexities of quantization and index assignment. The product quantizer (PQ) and its variation SAPQ [13], which are based on the scalar quantizer (SQ) and thus belong to a class of the binary lattice VQ [16], have inherent error resilience even though the conventional affine index assignment functions, such as the natural binary code, are employed. The error resilience of SAPQ is observed in a weak sense through worst-case bounds. Using SAPQ for noisy channels is useful especially for high rates, e.g., > 1 bit/sample, and it is numerically shown that the channel-limit performance of SAPQ is comparable to that of the best codebook permutation of binary switching algorithm (BSA) [23]. Further, the PQ or SAPQ codebook with an affine index assignment function is used for the initial guess of the conventional clustering algorithm, and it is shown that the performance of the best BSA can be easily achieved.

In conjunction with a first-order Taylor series approximation of the spatial scanning vector, this letter presents an iterative multiple signal classification (MUSIC) direction-of-arrival (DOA) estimation for code-division multiple access signals. This approach leads to a simple one-dimensional optimization problem to find each iterative optimal search grid. It can not only accurately estimate DOA, but also speed up the estimating process. Computer results demonstrate the effectiveness of the proposed algorithm.

Packet classification categorizes incoming packets into multiple forwarding classes based on pre-defined filters. This categorization makes information accessible for quality of service or security handling in the network. In this paper, we propose a scheme which combines the Aggregate Bit Vector algorithm and the Pruned Tuple Space Search algorithm to improve the performance of packet classification in terms of speed and storage. We also present the procedures of incremental update. Our scheme is evaluated with filter databases of varying sizes and characteristics. The experimental results demonstrate that our scheme is feasible and scalable.

It is known that Boolean functions used in stream ciphers should have good cryptographic properties to resist fast algebraic attacks. In this paper, we study a new class of Boolean functions with good cryptographic properties: balancedness, optimum algebraic degree, optimum algebraic immunity and a high nonlinearity.

Multiuser -- Multiple Input Multiple Output (MU-MIMO) techniques were proposed to increase spectrum efficiency; a key assumption was that the Mobile Terminals (MTs) were simple with only a few antennas. This paper focuses on the Block Diagonalization algorithm (BD) based on the equal power allocation strategy as a practical MU-MIMO technique. When there are many MTs inside the service area of the access point (AP), the AP must determine, at each time slot, the subset of the MTs to be spatially multiplexed. Since the transmission performance depends on the subsets of MTs, the user selection method needs to use the Channel State Information (CSI) obtained in the physical layer to maximize the Achievable Transmission Rate (ATR). In this paper, we clarify the relationship between ATR with SU-MIMO and that with MU-MIMO in a high eigenvalue channel. Based on the derived relationship, we propose a new measure for user selection. The new measure, the eigenvalue decay factor, represents the degradation of the eigenvalues in null space compared to those in SU-MIMO; it is obtained from the signal space vectors of the MTs. A user selection method based on the proposed measure identifies the combination of MTs that yields the highest ATR; our approach also reduces the computational load of user selection. We evaluate the effectiveness of user selection with the new measure using numerical formulations and computer simulations.

This paper presents the analysis and design of a reflection-cancelling transverse slot-pair array antenna with baffles by using the Spectrum of Two-Dimensional Solutions (S2DS) method. For the transverse slot array, the slot spacings with more than one free-space wavelength cause the grating-lobes. The baffles suppress the grating-lobes effectively. A one-dimensional slot array is extracted from the 2D array with in-phase excitation by assuming periodicity in the transversal direction. The uniform excitation over the finite array is synthesized iteratively to demonstrate the fast and accurate results by S2DS. A unit design model with the baffles is introduced to determine the initial parameters of the slot-pairs, which greatly accelerate the iterations process. Experiments at 25.3 GHz demonstrate the suppression of the grating lobes to the level less than -20.0 dB and also the good uniformity of the aperture field distribution.

Fiber access network architectures such as active optical networks (AONs) and passive optical networks (PONs) have been developed to support the growing bandwidth demand. Whereas particularly Swedish operators prefer AON, this may not be the case for operators in other countries. The choice depends on a combination of technical requirements, practical constraints, business models, and cost. Due to the increasing importance of reliable access to the network services, connection availability is becoming one of the most crucial issues for access networks, which should be reflected in the network owner's architecture decision. In many cases protection against failures is realized by adding backup resources. However, there is a trade off between the cost of protection and the level of service reliability since improving reliability performance by duplication of network resources (and capital expenditures CAPEX) may be too expensive. In this paper we present the evolution of fiber access networks and compare reliability performance in relation to investment and management cost for some representative cases. We consider both standard and novel architectures for deployment in both sparsely and densely populated areas. While some recent works focused on PON protection schemes with reduced CAPEX the current and future effort should be put on minimizing the operational expenditures (OPEX) during the access network lifetime.

For phased and adaptive arrays of antennas, an optimal arrangement of antenna elements is essential to avoid grating lobes in the visible angular region of the array. Large sidelobes cause degradation in signal-to-noise ratio; grating lobes, in the worst case, cause malfunctions. One method of evaluating sidelobe level is square integration. For a given set element positions, evaluation by square integration of the sidelobes involves Fourier transform and numerical integration. For faster evaluation, we developed an equivalent transform algorithm that requires no numerical Fourier transform or integration. Using this new algorithm, we introduced a fast trial-and-error algorithm that iteratively applies random perturbation to the array, evaluates the function, and minimizes it. A number of separate runs of this algorithm have been conducted under the constraint of 3-fold rotational symmetry for stability. The optimal output, for which the function is minimized, is a uniformly spaced equilateral-triangular-type arrays that, unfortunately, has unwanted grating lobes. However the algorithm also yields variations trapped at local minima, some of which do not have grating lobes and whose sidelobe peaks are sufficiently low within a wide angular region. For the case N=12, a characteristic triagular-rectangular-type array often arises, which has not only better sidelobe properties as evaluated by square-integration and peak sidelobe, but also sufficient element-to-element clearance. For the case N=36, one of the results achieves a peak-sidelobe level of -8 dB, with a minimum element-to-element separation of 0.76 wavelength.

Combining the sphere decoding (SD) algorithm and the sequential detection method, we propose an adaptive group detection (AGD) scheme based on the sort-descending QRD (S-D-QRD) for V-BLAST architectures over an i.i.d. Rayleigh flat fading channel. Simulation results show that the proposed scheme, which encompasses the SD algorithm and the sequential detection method as two extreme cases in a probability sense, can achieve a very flexible tradeoff between the detection performance and computational complexity by adjusting the group parameter.

In this paper, an error correction scheme suitable for MC-DS-CDMA system with bi-orthogonal modulation is proposed. The input sequence of a bi-orthogonal modulator consists of n - 1 bit code selection bit sequence and 1 bit sign bit sequence. In order to apply an efficient error correction code, the following points should be considered; (1) if the code selection bits can be protected sufficiently, the sign bit error can also be reduced sufficiently, (2) since a code selection bit sequence consists of n - 1 bits, employing a symbol error correcting code is more effective for encoding code selection bits, (3) the complexity of the error correction encoder and decoder implementations should be minimum. Based on these conditions, we propose to employ Reed-Solomon (RS) code for encoding the code selection bits and no error correction code for the sign bit. Additionally, detection algorithm at the bi-orthogonal demodulator is modified for compensating degradations of the sign bit error rate performance. The performance in an Additive White Gaussian Noise (AWGN) channel is evaluated by both theoretical analysis and computer simulations. The performance evaluations by simulations on multi-path fading channels are also shown. It is shown that the proposed scheme has remarkable improvement.

In a Direct-Sequence/Spread-Spectrum (DS/SS) system, a RAKE receiver is used to improve a bit error rate (BER) performance. The RAKE receiver can collect more signal energy through independent paths and achieve path diversity. The RAKE receiver obtains further diversity gain through fractional sampling. However, the power consumption of the RAKE receiver increases in proportion to a sampling rate and does not always maximize the signal-to-noise ratio (SNR). Therefore, sampling rate selection schemes have been proposed to reduce the average sampling rate without degrading the BER. These schemes select the tap positions and the sampling rate depending on channel conditions and the power consumption can be reduced. In this paper, sampling rate selection schemes for the DS/SS system are investigated through an experiment since there have been no numerical results through an experiment. Numerical results show that the power consumption can be reduced even through the experiment without the degradation of the BER.

In this letter, Doppler spread estimation in different Doppler spectra is investigated and some efficient methods are proposed to calculate the maximum Doppler frequency from autocorrelation function easily.