The concepts of programmable switches and software-defined networking (SDN) give developers flexible and deep control over the behavior of switches. We expect these concepts to dramatically improve the functionality of switches. In this paper, we focus on the concept of Deeply Programmable Networks (DPN), where data planes are programmable, and application switches based on DPN. We then propose a method to improve the performance of a key-value store (KVS) through an application switch. First, we explain the DPN and application switches. The DPN is a network that makes not only control planes but also data planes programmable. An application switch is a switch that implements some functions of network applications, such as database management system (DBMS). Second, we propose a method to improve the performance of Cassandra, one of the most popular key-value based DBMS, by implementing a caching function in a switch in a dedicated network such as a data center. The proposed method is expected to be effective even though it is a simple and traditional way because it is in the data path and the center of the network application. Third, we implement a switch with the caching function, which monitors the accessed data described in packets (Ethernet frames) and dynamically replaces the cached data in the switch, and then show that the proposed caching switch can significantly improve the KVS transaction performance with this implementation. In the case of our evaluation, our method improved the KVS transaction throughput by up to 47%.

In this survey we summarize properties of pseudorandomness and non-randomness of some number-theoretic sequences and present results on their behaviour under the following measures of pseudorandomness: balance, linear complexity, correlation measure of order k, expansion complexity and 2-adic complexity. The number-theoretic sequences are the Legendre sequence and the two-prime generator, the Thue-Morse sequence and its sub-sequence along squares, and the prime omega sequences for integers and polynomials.

This paper focuses on a pseudorandom number generator called an NTU sequence for use in cryptography. The generator is defined with an m-sequence and Legendre symbol over an odd characteristic field. Since the previous researches have shown that the generator has maximum complexity; however, its bit distribution property is not balanced. To address this drawback, the author introduces dynamic mapping for the generation process and evaluates the period and some distribution properties in this paper.

There are two types of elliptic curves, ordinary elliptic curves and supersingular elliptic curves. In 2012, Sutherland proposed an efficient and almost deterministic algorithm for determining whether a given curve is ordinary or supersingular. Sutherland's algorithm is based on sequences of isogenies started from the input curve, and computation of each isogeny requires square root computations, which is the dominant cost of the algorithm. In this paper, we reduce this dominant cost of Sutherland's algorithm to approximately a half of the original. In contrast to Sutherland's algorithm using j-invariants and modular polynomials, our proposed algorithm is based on Legendre form of elliptic curves, which simplifies the expression of each isogeny. Moreover, by carefully selecting the type of isogenies to be computed, we succeeded in gathering square root computations at two consecutive steps of Sutherland's algorithm into just a single fourth root computation (with experimentally almost the same cost as a single square root computation). The results of our experiments using Magma are supporting our argument; for cases of characteristic p of 768-bit to 1024-bit lengths, our proposed algorithm for characteristic p≡1 (mod 4) runs in about 61.5% of the time and for characteristic p≡3 (mod 4) also runs in about 54.9% of the time compared to Sutherland's algorithm.

The CGL hash function is a provably secure hash function using walks on isogeny graphs of supersingular elliptic curves. A dominant cost of its computation comes from iterative computations of power roots over quadratic extension fields. In this paper, we reduce the necessary number of power root computations by almost half, by applying and also extending an existing method of efficient isogeny sequence computation on Legendre curves (Hashimoto and Nuida, CASC 2021). We also point out some relationship between 2-isogenies for Legendre curves and those for Edwards curves, which is of independent interests, and develop a method of efficient computation for 2e-th roots in quadratic extension fields.

The hardness of the syndrome decoding problem (SDP) is the primary evidence for the security of code-based cryptosystems, which are one of the finalists in a project to standardize post-quantum cryptography conducted by the U.S. National Institute of Standards and Technology (NIST-PQC). Information set decoding (ISD) is a general term for algorithms that solve SDP efficiently. In this paper, we conducted a concrete analysis of the time complexity of the latest ISD algorithms under the limitation of memory using the syndrome decoding estimator proposed by Esser et al. As a result, we present that theoretically nonoptimal ISDs, such as May-Meurer-Thomae (MMT) and May-Ozerov, have lower time complexity than other ISDs in some actual SDP instances. Based on these facts, we further studied the possibility of multiple parallelization for these ISDs and proposed the first GPU algorithm for MMT, the multiparallel MMT algorithm. In the experiments, we show that the multiparallel MMT algorithm is faster than existing ISD algorithms. In addition, we report the first successful attempts to solve the 510-, 530-, 540- and 550-dimensional SDP instances in the Decoding Challenge contest using the multiparallel MMT.

Anonymous attackers have been targeting the Android ecosystem for performing severe malicious activities. Despite the complement of various vulnerabilities by security researchers, new vulnerabilities are continuously emerging. In this paper, we introduce a new type of vulnerability that can be exploited to hide data in an application file, bypassing the Android's signing policy. Specifically, we exploit padding areas that can be created by using the alignment option when applications are packaged. We present a proof-of-concept implementation for exploiting the vulnerability. Finally, we demonstrate the effectiveness of VeileDroid by using a synthetic application that hides data in the padding area and updates the data without re-signing and updating the application on an Android device.

High-altitude platform stations (HAPSs) are recognized as a promising technology for coverage extension in the sixth generation (6G) mobile communications and beyond. The purpose of this study is to develop a HAPS system with a coverage radius of 100km and high capacity by focusing on the following two aspects: array antenna structure and user selection. HAPS systems must jointly use massive multiple-input multiple-output (mMIMO) and multiuser MIMO techniques to increase their capacity. However, the coverage achieved by a conventional planar array antenna is limited to a circular area with a radius of only tens of kilometers. A conventional semi-orthogonal user selection (SUS) scheme based on the orthogonality of channel vectors achieves high capacity, but it has high complexity. First, this paper proposes a cylindrical mMIMO system to achieve an ultra-wide coverage radius of 100km and high capacity. Second, this paper presents a novel angle-based user selection (AUS) scheme, where a user selection problem is formulated as a maximization of the minimum angular difference between users over all user groups. Finally, a low-complexity suboptimal algorithm (SA) for AUS is also proposed. Assuming an area with a 100km radius, simulation results demonstrate that the proposed cylindrical mMIMO system improves the signal-to-interference-plus-noise ratio by approx. 12dB at the boundary of the area, and it achieves approx. 1.5 times higher capacity than the conventional mMIMO which uses a planar array antenna. In addition, the results show that the proposed AUS scheme improves the lower percentiles in the system capacity distribution compared with SUS and basic random user selection. Furthermore, the computational complexity of the proposed SA is in the order of only 1/4000 that of SUS.

Android operating system occupies a high share in the mobile terminal market. It promotes the rapid development of Android applications (apps). However, the emergence of Android malware greatly endangers the security of Android smartphone users. Existing research works have proposed a lot of methods for Android malware detection, but they did not make the utilization of apps' functional category information so that the strong similarity between benign apps in the same functional category is ignored. In this paper, we propose an Android malware detection scheme based on the functional classification. The benign apps in the same functional category are more similar to each other, so we can use less features to detect malware and improve the detection accuracy in the same functional category. The aim of our scheme is to provide an automatic application functional classification method with high accuracy. We design an Android application functional classification method inspired by the hyperlink induced topic search (HITS) algorithm. Using the results of automatic classification, we further design a malware detection method based on app similarity in the same functional category. We use benign apps from the Google Play Store and use malware apps from the Drebin malware set to evaluate our scheme. The experimental results show that our method can effectively improve the accuracy of malware detection.

In this paper, a compact microwave push-push oscillator based on a resonant tunneling diode (RTD) has been fabricated and demonstrated. A symmetrical spiral inductor structure has been used in order to reduce a chip area. The designed symmetric inductor is integrated into the InP-based RTD monolithic microwave integrated circuit (MMIC) technology. The circuit occupies a compact active area of 0.088 mm2 by employing symmetric inductor. The fabricated RTD oscillator shows an extremely low DC power consumption of 87 µW at an applied voltage of 0.47 V with good figure-of-merit (FOM) of -191 dBc/Hz at an oscillation frequency of 27 GHz. This is the first implementation as the RTD push-push oscillator with the symmetrical spiral inductor.

In this paper, we consider the collaborative editing of two-dimensional (2D) data such as handwritten letters and illustrations. In contrast to the editing of 1D data, which is generally realized by the combination of insertion/deletion of characters, overriding of strokes can have a specific meaning in editing 2D data. In other words, the appearance of the resulting picture depends on the reflection order of strokes to the shared canvas in addition of the absolute coordinate of the strokes. We propose a Peer-to-Peer (P2P) collaborative drawing system consisting of several nodes with replica canvas, in which the consistency among replica canvases is maintained through data channel of WebRTC. The system supports three editing modes concerned with the reflection order of strokes generated by different users. The result of experiments indicates that the proposed system realizes a short latency of around 120 ms, which is a half of a cloud-based system implemented with Firebase Realtime Database. In addition, it realizes a smooth drawing of pictures on remote canvases with a refresh rate of 12 fps.

Periodic sequences, used as keys in cryptosystems, plays an important role in cryptography. Such periodic sequences should possess high linear complexity to resist B-M algorithm. Sequences constructed by cyclotomic cosets have been widely studied in the past few years. In this paper, the linear complexity of n-periodic cyclotomic sequences of order 2 and 4 over 𝔽p has been calculated, where n and p are two distinct odd primes. The conclusions reveal that the presented sequences have high linear complexity in many cases, which indicates that the sequences can resist the linear attack.

Detecting Android malwares is imperative. As a promising Android malware detection scheme, we focus on the scheme leveraging the differences of traffic patterns between benign apps and malwares. Those differences can be captured even if the packet is encrypted. However, since such features are just statistic based ones, they cannot identify whether each traffic is malicious. Thus, it is necessary to design the scheme which is applicable to encrypted traffic data and supports identification of malicious traffic. In this paper, we propose an Android malware detection scheme based on level of SSL server certificate. Attackers tend to use an untrusted certificate to encrypt malicious payloads in many cases because passing rigorous examination is required to get a trusted certificate. Thus, we utilize SSL server certificate based features for detection since their certificates tend to be untrusted. Furthermore, in order to obtain the more exact features, we introduce required permission based weight values because malwares inevitably require permissions regarding malicious actions. By computer simulation with real dataset, we show our scheme achieves an accuracy of 92.7%. True positive rate and false positive rate are 5.6% higher and 3.2% lower than the previous scheme, respectively. Our scheme can cope with encrypted malicious payloads and 89 malwares which are not detected by the previous scheme.

Urban area suffers severe multipath effects due to its complex infrastructure environment and sector antenna is a popular choice as a base station antenna in those areas. Within sector antennas, omni cell antenna is utilized as supporting antenna to cover low reception areas between them. This paper proposes a slant 45° dual polarized omnidirectional antenna to operate as the omni cell antenna in those environments. The frequency band covers the IMT band, ranging from 1920MHz to 2170MHz with directivity focusing in horizontal plane. The antenna structure consists of a loop slot antenna array as excitation element which is placed inside a cylindrical slot antenna as parasitic element. Good performance is achieved in both S-parameter and directivity results, with a gain of more than 4 dBi and a gain difference of less than 1.5dB. The measurement results also agree well with the simulation results and the final design confirms that the proposed antenna works effectively as a slant ±45 ° dual polarized omnidirectional antenna.

We numerically demonstrate a possibility on-off keying (OOK) type of modulation over tens gigabits per second for sub-terahertz radiation in our proposed wireless transmitter device structure towards radio over fiber (RoF) technology. The integrated device consists of an InP-based compound semiconductor resonant tunneling diode (RTD) adjacent to an InP-based photo diode (PD), a self-complementary type of bow-tie antenna (BTA), external microstrip lines. These integration structures are carefully designed to obtain robust relaxation oscillation (RO) due to the negative differential conductance (NDC) characteristic of the RTD and the nonlinearity of the NDC. Moreover, the device is designed to exhibit OOK modulation of RO due to photo current from the PD inject into the RTD. Electromagnetic simulations and nonlinear equivalent circuit model of the whole device structure are established to perform large signal analysis numerically with considerations of previously measured characteristics of the triple-barrier RTD.

Android malwares are rapidly becoming a potential threat to users. Among several Android malware detection schemes, the scheme using Inter-Component Communication (ICC) is gathering attention. That scheme extracts numerous ICC-related features to detect malwares by machine learning. In order to mitigate the degradation of detection performance caused by redundant features, Correlation-based Feature Selection (CFS) is applied to feature before machine learning. CFS selects useful features for detection in accordance with the theory that a good feature subset has little correlation with mutual features. However, CFS may remove useful ICC-related features because of strong correlation between them. In this paper, we propose an effective feature selection scheme for Android ICC-based malware detection using the gap of the appearance ratio. We argue that the features frequently appearing in either benign apps or malwares are useful for malware detection, even if they are strongly correlated with each other. To select useful features based on our argument, we introduce the proportion of the appearance ratio of a feature between benign apps and malwares. Since the proportion can represent whether a feature frequently appears in either benign apps or malwares, this metric is useful for feature selection based on our argument. Unfortunately, the proportion is ineffective when a feature appears only once in all apps. Thus, we also introduce the difference of the appearance ratio of a feature between benign apps and malwares. Since the difference simply represents the gap of the appearance ratio, we can select useful features by using this metric when such a situation occurs. By computer simulation with real dataset, we demonstrate our scheme improves detection accuracy by selecting the useful features discarded in the previous scheme.

Permission warnings and privacy policy enforcement are widely used to inform mobile app users of privacy threats. These mechanisms disclose information about use of privacy-sensitive resources such as user location or contact list. However, it has been reported that very few users pay attention to these mechanisms during installation. Instead, a user may focus on a more user-friendly source of information: text description, which is written by a developer who has an incentive to attract user attention. When a user searches for an app in a marketplace, his/her query keywords are generally searched on text descriptions of mobile apps. Then, users review the search results, often by reading the text descriptions; i.e., text descriptions are associated with user expectation. Given these observations, this paper aims to address the following research question: What are the primary reasons that text descriptions of mobile apps fail to refer to the use of privacy-sensitive resources? To answer the research question, we performed empirical large-scale study using a huge volume of apps with our ACODE (Analyzing COde and DEscription) framework, which combines static code analysis and text analysis. We developed light-weight techniques so that we can handle hundred of thousands of distinct text descriptions. We note that our text analysis technique does not require manually labeled descriptions; hence, it enables us to conduct a large-scale measurement study without requiring expensive labeling tasks. Our analysis of 210,000 apps, including free and paid, and multilingual text descriptions collected from official and third-party Android marketplaces revealed four primary factors that are associated with the inconsistencies between text descriptions and the use of privacy-sensitive resources: (1) existence of app building services/frameworks that tend to add API permissions/code unnecessarily, (2) existence of prolific developers who publish many applications that unnecessarily install permissions and code, (3) existence of secondary functions that tend to be unmentioned, and (4) existence of third-party libraries that access to the privacy-sensitive resources. We believe that these findings will be useful for improving users' awareness of privacy on mobile software distribution platforms.

Recently, IoT compatible products have been popular, and various kinds of things are IoT compliant products. In these devices, cryptosystems and authentication are not treated properly, and security measures for IoT devices are not sufficient. Requirements of authentication for IoT devices are power saving and one-to-many communication. In this paper, we propose a zero-knowledge identification scheme using LDPC codes. In the proposed scheme, the zero-knowledge identification scheme that relies on the binary syndrome decoding problem is improved and the computational cost of identification is reduced by using the sparse parity-check matrix of the LDPC codes. In addition, the security level, computational cost and safety of the proposed scheme are discussed in detail.

This paper discusses VDT syndrome from the point of view of the viewing distance between a computer screen and user's eyes. This paper conducts a series of experiments to show an impact of the viewing distance on task performance. In the experiments, two different viewing distances of 50cm and 350cm with the same viewing angle of 30degrees are taken into consideration. The results show that the long viewing distance enables people to manipulate the mouse more slowly, more correctly and more precisely than the short.

The authors have proposed a multi-value sequence called an NTU sequence which is generated by a trace function and the Legendre symbol over a finite field. Most of the properties for NTU sequence such as period, linear complexity, autocorrelation, and cross-correlation have been theoretically shown in our previous work. However, the distribution of digit patterns, which is one of the most important features for security applications, has not been shown yet. In this paper, the distribution has been formulated with a theoretic proof by focusing on the number of 0's contained in the digit pattern.