Multi-band WDM transmission beyond the C+L-band is a promising technology for achieving larger capacity transmission by a limited number of installed fibers. In addition to the C- and L-band, we can expect to use the S-band as the next band. Although the development of optical components for new bands, particularly transceivers, entails resource dispersion, which is one of the barriers to the realization of multi-band systems, wavelength conversion by transparent all-optical signal processing enables new wavelength bandtransmission using existing components. Therefore, we proposed a transmission system including a new wavelength band such as the S-band and made it possible to use a transceiver for the existing band by performing the whole-band wavelength conversion without using a transceiver for the new band. As a preliminary verification to demonstrate multi-band WDM transmission including S-band, we investigated the application of a novel wavelength converter between C-band and S-band, which consists of periodically poled lithium niobate waveguide, to the proposed system. We first characterized the conversion efficiency and noise figure of the wavelength converter and estimated the transmission performance of the system through the wavelength converter. Using the evaluated wavelength converters and test signals of 64 channels arranged in the C-band at 75-GHz intervals, we constructed an experimental setup for S-band transmission through an 80-km standard single-mode fiber. We then demonstrated error-free transmission of real-time 400-Gb/s DP-16QAM signals after forward error correction decoding. From the experimental results, it was clarified that the wavelength converter which realizes the uniform lossless conversion covering the whole C-band effectively achieves the S-band WDM transmission, and it was verified that the capacity improvement of the multi-band WDM system including the S-band can be expected by applying it in combination with the C+L-band WDM system.

One of cost-effective ways to increase the transmission capacity of current standard wavelength division multiplexing (WDM) transmission systems is to use a wavelength band other than the C-band to transmit in multi-band. We proposed the concept of multi-band system using wavelength conversion, which can simultaneously process signals over a wide wavelength range. All-optical wavelength conversion could be used to convert C-band WDM signals into other bands in a highly nonlinear fiber (HNLF) by four-wave mixing and allow to simultaneously transmit multiple WDM signals including other than the C-band, with only C-band transceivers. Wavelength conversion has been reported for various nonlinear waveguide materials other than HNLF. In such nonlinear materials, we noticed the possibility of wideband transmission by dispersion-tailored silicon-on-insulator (SOI) waveguides. Based on the CMOS process has high accuracy, it is expected that the chromatic dispersion fluctuation could be reduced in mass production. As a first step in the investigation of the broadness of wavelength conversion using SOI-based waveguides, we designed and fabricated dispersion-tailored 12 strip waveguides provided with an edge coupler at both ends. Each of the 12 waveguides having different widths and lengths and is connected to fibers via lensed fibers or by lenses. In order to characterize each waveguide, the pump-probe experimental setup was constructed using a tunable light source as pump and an unmodulated 96-ch C-band WDM test signal. Using this setup, we evaluate insertion loss, input power dependence, conversion bandwidth and conversion efficiency. We confirmed C-band test signal was converted to the S-band and the L-band using the same silicon waveguide with 3dB conversion bandwidth over 100-nm. Furthermore, an increased design tolerance of at least 90nm was confirmed for C-to-S conversion by shortening the waveguide length. It is confirmed that the wavelength converters using the nonlinear waveguide has sufficiently wide conversion bandwidth to enhance the multi-band WDM transmission system.

Optical phase conjugation (OPC) is an all-optical signal processing technique for mitigating fiber nonlinearity and is promising for building cost-efficient fiber networks with few optic-electric-optic conversions and long amplification spacing. In lumped amplified systems, OPC has a little nonlinearity mitigation efficiency for nonlinear distortion induced by cross-phase modulation (XPM) due to the asymmetry of power and chromatic dispersion (CD) maps during propagation in transmission fiber. In addition, the walk-off of XPM-induced noise becomes small due to the CD compensation effect of OPC, so the deterministic nonlinear distortion increases. Therefore, lumped amplified transmission systems with OPC are more sensitive to channel spacing than conventional systems. In this paper, we show the channel spacing dependence of NZ-DSF transmission using amplification repeater with OPC. Numerical simulations show comprehensive characteristics between channel spacing and CD in a 100-Gbps/λ WDM signal. An experimental verification using periodically poled LiNbO3-based OPC is also performed. These results suggest that channel spacing design is more important in OPC-assisted systems than in conventional dispersion-unmanaged systems.

We developed a polarization-independent and reserved-band-less complementary spectral inverted optical phase conjugation (CSI-OPC) device using dual-band difference frequency generation based on highly efficient periodically poled LiNbO3 waveguide technologies. To examine the nonlinearity mitigation in a long-haul transmission using a large number of OPCs, we installed a CSI-OPC device in the middle of a pure silica core fiber-based recirculating loop transmission line with a length of 320km. First, we examined the fiber-input power tolerance after 5,120-km and 6,400-km transmission using 22.5-Gbaud PDM-16QAM 10-channel DWDM signals and found a Q-factor improvement of over 1.3dB along with enhanced power tolerance thanks to mitigating the fiber nonlinearity. We then demonstrated transmission distance extension using the CSI-OPC device. The use of multiple CSI-OPCs enables an obvious performance improvements attained by extending the transmission distance from 6,400km to 8,960km, which corresponds to applying the CSI-OPC device 28 times. Moreover, there was no Q-factor degradation for the link in a linear regime after applying the CSI-OPC device more than 16 times. These results demonstrate that the CSI-OPC device can improve the nonlinear tolerance of PDM-16QAM signals without an excess penalty.

We have comprehensively studied by numerical simulation high power transmission properties through single mode fiber for non-repeatered system application. We have clearly captured bit error rates (BERs) of digital coherent signal exhibit specific floor levels, depending on transmitter powers, due to fiber nonlinearity. If the maximum transmitter powers are defined as the powers at which BER floor levels are 1.0×10-2 without error correction, those are found to be approximately +20.4dBm, +14.8dBm and +10.6dBm, respectively, for single-channel 120Gbps DP-QPSK, DP-16QAM and DP-64QAM formats in large-core and low-loss single-mode silica fibers. In the simulations, we set fiber lengths over 100km, which is much longer than the effective fiber length, thus the results are applicable to any of long-length non-repeatered systems. We also show that the maximum transmitter powers gradually decrease in logarithmic feature with the increase of the number of DWDM channels. The channel number dependence is newly shown to be almost independent on the modulation format. The simulated results have been compared with extended Gaussian-Noise (GN) model with introducing adjustment parameters, not only to confirm the validity of the results but to explore possible new analytical modeling for non-repeatered systems.

We discuss our recent progress in photonic crystal nanocavity quantum dot lasers. We show how enhanced light matter interactions in the nanocavity lead to diverse and fascinating lasing phenomena that are in general inaccessible by conventional bulky semiconductor lasers. First, we demonstrate thresholdless lasing, in which any clear kink in the output laser curve does not appear. This is a result of near unity coupling of spontaneous emission into the lasing cavity mode, enabled by the strong Purcell effect supported in the nanocavity. Then, we discuss self-frequency conversion nanolasers, in which both near infrared lasing oscillation and nonlinear optical frequency conversion to visible light are simultaneously supported in the individual nanocavity. Owing to the tight optical confinement both in time and space, a high normalized conversion efficiency over a few hundred %/W is demonstrated. We also show that the intracavity nonlinear frequency conversion can be utilized to measure the statistics of the intracavity photons. These novel phenomena will be useful for developing various nano-optoelectronic devices with advanced functionalities.

We numerically and experimentally demonstrate for the first time a novel all-optical quantization technique using dense spectral slicing with a specially designed arrayed waveguide grating for orthogonal frequency division multiplexed signals. By using a mode-locked laser diode with low jitter, the quantization technique can be achieved a high-speed and low-jitter operation. Both numerical and experimental results confirm the feasibility of 10 GSample/s, completely linear 3-bit step quantization for photonic analog to digital conversion. This optical quantization technique will be beneficial for ultra-high-speed optical communication using digital signal processing.

In all-optical switches using the cascade of second harmonic generation and difference frequency mixing in periodically poled lithium niobate (PPLN) waveguide devices, walk-off between the fundamental and second harmonic pulses causes crosstalk between neighboring symbols, and limits the switching performance. In this paper, we numerically study retiming characteristics of all-optical switches that employ the PPLN waveguide devices with consideration for the effects of the crosstalk and for the input timing of the data and clock pulses. We find that the time offset between the data and clock pulses can control the timing jitter of the switched output; an appropriate offset can reduce the jitter while improving the switching efficiency.

We propose an accurate modeling of the wavelength conversion process by dynamic tuning of a dielectric cavity. Since the process involves the long-distance propagation of light, the finite-difference time-domain (FDTD) method is not suitable for modeling of the wavelength conversion process owing to the numerical dispersion error of the FDTD method. The proposed modeling is based on the constrained interpolation profile (CIP) method, which was developed in the field of computational fluid dynamics for the purpose of reducing considerably the numerical dispersion error, and is formulated for a one-dimensional problem using an interpolation function of a higher order than that used in the original CIP method. Numerical experiments reveal that the proposed method can achieve accurate prediction of the wavelength conversion process even with a coarse grid model and is superior to both the original CIP method and the FDTD method.

We report a 40-Gb/s and highly accurate intensity limiter with a single Erbium-Doped Fiber Amplifier (EDFA) for low-power-consumption driving intensity limiting. The intensity limiter based on self-phase modulation with an appropriate pre-chirping procedure makes it possible, which provides a highly accurate limiting of less than 0.01 dB. We fed 40-Gb/s signals with 2.69 dB intensity fluctuation and 4.7 dB improvement on the receiver sensitivity was obtained for a bit error rate of 10-9 by using a numerical simulation.

We investigate electronic mitigation of linear and nonlinear fibre impairments and compare various digital signal processing techniques, including electronic dispersion compensation (EDC), single-channel back-propagation (SC-BP) and back-propagation with multiple channel processing (MC-BP) in a nine-channel 112 Gb/s PM-mQAM (m=4,16) WDM system, for reaches up to 6,320 km. We show that, for a sufficiently high local dispersion, SC-BP is sufficient to provide a significant performance enhancement when compared to EDC, and is adequate to achieve BER below FEC threshold. For these conditions we report that a sampling rate of two samples per symbol is sufficient for practical SC-BP, without significant penalties.

This study proposes a novel structure of index-guiding square photonic crystal fibers (SPCF) having simultaneously ultra-flattened chromatic dispersion characteristics and low confinement losses in a wide wavelength range. The finite difference method (FDM) with anisotropic perfectly matched layers (PMLs) is used to analyze the various properties of square PCF. The findings reveal that it is possible to design five-ring PCFs with a flattened negative chromatic dispersion of 0-1.5 ps/(nm.km) in a wavelength range of 1.27 µm to 1.7 µm and a flattened chromatic dispersion of 01.15 ps/(nm.km) in a wavelength range of 1.25 µm to 1.61 µm. Simultaneously it also exhibited that the confinement losses are less than 10-9 dB/m and 10-10 dB/m in the wavelength range of 1.25 µm to 1.7 µm.

Symmetric Mach-Zehnder (SMZ) type all-optical swit-ches are discussed. The SMZ type all-optical switches feature the so-called differential phase modulation scheme to achieve a speed unrestricted by efficient, thus usually slow nonlinearities. In these switches, semiconductor optical amplifiers (SOAs) are often used to realize low optical power switching. We discussed SOAs from a view point of all-optical switch applications, rather than amplifier applications. Finally, all-optical signal processing experiments are discussed with the SMZ type all-optical switches. These include ultrafast demultiplexing of 336 Gb/s signal pulses and random operations at 42 Gb/s for all-optical logic operation and wavelength conversion.

Organic nonlinear optical crystal 4-(p-dimethylaminostyryl)-1-methylpridinium tosylate (DAST) has a larger electro-optic (EO) coefficient than that of LiNbO3 crystal. Thus, DAST is a promising material for EO switching device. To use its large EO coefficient effectively, a waveguide structure is desirable. We have successfully fabricated two types of DAST crystal optical channel waveguide. One is a serially grafted waveguide combining a DAST and a transparent polymer by using the combination of standard photo-process and reactive ion-etching (RIE). Because DAST has large optical loss, parts of the waveguide should be composed of transparent polymer with a serially grafted structure with DAST. This structure reduced not only a propagation loss but also input/output losses. This serially graft waveguide fabrication technique for active organic crystal is available to many types of crystals with device function. The other is a channel waveguide made by a photo-bleaching technique. The cladding part of DAST waveguide was photo-bleached by irradiation of UV light. Under and over cladding layer were composed with UV-cured resin that did not dissolve the DAST crystal. This technique is very convenient for making DAST waveguide because of its simple procedure to make core-cladding structure of DAST compared to standard photo-process and RIE.

Polyurea thin films containing azo-based nonlinear optical (NLO) chromophore were prepared by co-deposition of 4,4'-diphenylmethane diisocyanate and 2,4-diamino-4'-nitroazobenzene monomers using the ionization-assisted method. The co-deposited film reacted to form polyurea after annealing in the air. The dichroic optical absorption spectra indicated the preferential orientation of dipole moments in the as-deposited film. The substrate bias voltage influenced the optical anisotropy. Maker fringe measurement showed that the films have NLO activity without the poling process.

All-optical switching operating at 1.55 µm band in fabricated GaInAsP directional couplers loaded with grating are reported experimentally. These switching operations were realized in spatially separated output ports. The devices are suitable for optical integrated circuits and would operate as all-optical routing switches in practical power level by use of optical Kerr effect and Bragg grating. Using the optical bistability in the device, latching operation for output signal can be realized in spatially separated output ports and the outputs from each port are complementary. Two all-optical gate operations, which are optical inverting operation and optically controlled switching in spatially separated output ports, are also demonstrated, where the signal and control lights have different wavelength.

The effectiveness and possible applications of all-optical signal processing using highly-nonlinear dispersion-shifted fibers (HNL-DSFs) are described. Transparent and simultaneous processings of multi-channels WDM signal are key features of optical fiber processors. Simultaneous wavelength conversion of 3210 Gb/s WDM signal by four-wave mixing, all-optical 3R regeneration of 220 Gb/s WDM signal using nonlinear loop mirrors, and simultaneous recovery of 2020 GHz WDM optical clocks by supercontinuum were successfully demonstrated using HNL-DSFs, and possible applications of ultra-fast and multi-channel processing in future photonic networks are discussed.

The effectiveness and possible applications of all-optical signal processing using highly-nonlinear dispersion-shifted fibers (HNL-DSFs) are described. Transparent and simultaneous processings of multi-channels WDM signal are key features of optical fiber processors. Simultaneous wavelength conversion of 3210 Gb/s WDM signal by four-wave mixing, all-optical 3R regeneration of 220 Gb/s WDM signal using nonlinear loop mirrors, and simultaneous recovery of 2020 GHz WDM optical clocks by supercontinuum were successfully demonstrated using HNL-DSFs, and possible applications of ultra-fast and multi-channel processing in future photonic networks are discussed.

A newly developed hybrid-integrated Symmetric Mach-Zehnder (HI-SMZ) all-optical switch is reported. For integration, we chose the Symmetric Mach-Zehnder (SMZ) structure rather than the Polarization-Discriminating Symmetric Mach-Zehnder (PD-SMZ) structure which is similar to SMZ but more often used in experiments using discrete optical components. We discuss advantages and disadvantages of SMZ and PD-SMZ to show that SMZ is more suitable for integration. We also discuss about the use of SOAs as nonlinear elements for all-optical switches. We conclude that, although the ultrafast switching capability of SMZ is limited by the gain compression of SOAs, the very low switching energy is more important for practical devices. We then describe the HI-SMZ all-optical switch. This integration scheme has advantages which include low loss, low dispersion silica waveguides for high speed operation and ease in large scale integration of many SMZs with other optical, electrical, and opto-electrical devices. We show that a very high dynamic extinction ratio is possible with HI-SMZ. We also examine HI-SMZ with 1 ps pulses to show its ultrafast capability. Finally, we describe a 168 to 10.5 Gbps error-free demultiplexing experiment which is to our best knowledge the fastest experiment with an integrated device.

Simultaneous measurements of temperature and strain were demonstrated by measuring the stimulated Brillouin scattering frequency shift and gain in two separate types of optical fibers: dispersion shifted and special GeO2-doped optical fiber. This novel approach allows for a hybrid frequency division and time division multiplexing scheme for developing advanced distributed strain sensing. The preliminary measurements show a temperature resolution of approximately 1.6 and a strain resolution of 32 µε.