Caenorhabditis elegans during feeding gives good moving biological images",in which motions of several pulsing organs are superposed on its head swing. A powerful method to extract dynamic features is presented. First step is to use a variance picture VAG4 in order to pick up active pixel coordinates of concerned moving objects. Superiority of VAG4 over usual variance picture VAG2 is shown quantitatively by a model of moving particles. Pulsing areas of C. elegans, are exhibited more clearly in VAG4 than VAG2. Second step is use of a new subtraction method to extract main frequency bands. FFT spectra are averaged in active positions where VAG4 is above threshold THVR in the square with 88 pixels (ONA). The power spectra averaged in the enlarged squares (ELA) are subtracted from those in ONA, in which ELA includes ONA in its centre position. Large peak bands emerge in the subtracted power spectra. The subtraction eliminates the effect of head swing by spatial averagings in ELA. This new emphasizing method is compared to another subtraction method. The characteristic frequency of periodical moving organs coincides well with the values observed by other research groups and our visual estimation of replayed VTR images. Thus the proposed extraction method is verified to work well in double superposed motions.

This paper presents a generalized new approach for testing interconnects (for boundary scan architectures) as well as field programmable interconnect chips (FPICs). This approach relies on a structured walking-1 test set in the sense that a structural analysis based on the layout of the interconnect system, is carried out. The proposed structural test method differs from previous approaches as it explicitly avoids aliasing and confounding and is applicable to dense as well as sparse layouts and in the presence of faults in the programmable devices of a FPIC. The proposed method is applicable to both one-step and two-step test generation and diagnosis. Two algorithms with an execution complexity of O(n2), where n is the number of nets in the interconnect, are given. New criteria for test vector compaction are proposed; a greedy condition is exploited to compact test vectors for one-step and two-step diagnosis. For a given interconnect, the two-step diagnosis algorithm requires a number of tests as a function of the number of faults present, while the one-step algorithm requires a fixed number of tests. Simulation results for benchmark and randomly generated layouts show a substantial reduction in the number of tests using the proposed approaches compared with previous approaches. The applicability of the proposed approach to FPICs as manufactured by [1] is discussed and evaluated by simulation.

This paper presents an accurate and semi-physical MOSFET substrate current model suitable for analog circuit simulations. The proposed model is valid over a wide range of the electric field present in MOSFET devices and is continuous from cut off region to saturation region. The developed model was implemented into the circuit simulator, SPICE3. Benchmark of the developed model was achieved by making comparisons between the measured data and the simulated data for MOSFET devices, push-pull CMOS inverters, a regulated cascode CMOS operational amplifier. The experimental results showed that the developed model was more accurate and computationally efficient than the conventional models.

This paper discusses the reliability of the Modified EBU method compared with the EBU and DSCQS methods where the small and different levels of impairments exist in the coded HDTV sequences. The subjective evaluation tests are carried out in the full and limited impairment ranges. And it is shown that the Modified EBU method is most reliable for both ranges.

This paper presents a theoretical study on transmission properties of bent optical waveguides of uniaxial anisotropic material. The waveguiding structure consists of two parallel straight slab waveguides connecting by an oblique section. By arranging the direction of the optical axis in the oblique section so that the wave normal always points to the same direction throughout the waveguiding structure, low loss transmission can be realized. The analysis of wave propagation through the structure is based on the finite difference beam propagation method. Numerical results indicate that by optimally arranging the direction of the optical axis in the oblique section power coupling coefficients better than 95% can be obtained for any tilt angle of the oblique section when the tilt angle is smaller than 2 degrees. Some field distributions are also presented along the waveguiding structure.

The emphasis on nonisotropic media in the electromagnetics research community has recently brought forward a large amount of new literature on the material effects. The material phenomena affecting the electromagnetic characterization are contained in the constitutive relations between an electric and a magnetic excitation and an electric and a magnetic response. Starting from the constitutive equations, this article is an attempt to cast light on the labels, terms, notation, and classification of linear electromagnetic materials. Using dyadic analysis and physical concepts like reciprocity and magnetoelectric coupling, the different classes within bi-anisotropic media are presented in systematic form. Simple isotropic media can be characterized by two material parameters: the electric polarizability is measured by permittivity ε, and the magnetic polarizability by the permeability µ. For bi-isotropic media, there exists magnetoelectric coupling, but due to isotropy (independence of the direction of the field vectors) the two additional material parameters are scalars. The physical interpretation to these two parameters are chirality and nonreciprocity. The two subclasses of bi-isotropic materials are Pasteur and Tellegen media. If there is direction dependence in the medium, we call the material anisotropic, and a scalar quantity has to be described by a dyadic with nine components. Finally, the most general material is called bi-anisotropic, which means that in addition to a dyadic permittivity and permeability, the two magnetoelectric material parameters are dyadics. The essential feature in the classification of the present paper is the separation of all the four material parameter dyadics into symmetric and antisymmetric parts. For permittivity and permeability, the symmetric parts correspond to reciprocal media and the antisymmetric parts are nonzero for nonreciprocal media. In the cross-coupling dyadics the decomposition into symmetric and antisymmetric parts disriminates chiral media, omega media, classical magnetoelectric media, and moving media. Finally, possible alternative characterrizations of bi-anisotropic materials are discussed.

In practical applications of the artificial boundary surfaces, such as corrugation and strips on a grounded dielectric slab, the surfaces have finite sizes. The diffraction fields from anisotropic surface of this kind can not be calculated using conventional diffraction coefficients. In this paper, uniform diffraction coefficients for the strips on a grounded dielectric slab are given in the sense of physical optics, as functions of incident angle, polarization and structural parameters of the surface. Firstly, the incident plane wave is decomposed into the two special polarization directions. Then uniform diffraction coefficients originally derived for isotropic surfaces with arbitrary impedance can be applied for each polarization component. Finally, expressions for the diffraction coefficients from the anisotropic surface are given as the sum of those for two polarization components. The validity of the diffraction coefficients is verified theoretically and experimentally.

We present a 44 matrix-based analysis of scattering form a two-dimensional rectangular resistive plane gratings placed on an anisotropic dielectric slab. The solution procedure used is formulated by extending the 44 matrix approach. The fields are expanded in terms of two-dimensional Floquet modes. Total fields can be given as sum of primary and secondary fields whose expression are obtained through eigenvalue problem of coupled wave matrix. Unknown currents on resistive patches are determined by applying Galerkin's method to the resistive boundary condition on resistive grating. Results are compared with other numerical examples available in the literature for isotropic cases. Further, numerical calculation are performed in the case of gratings with polar-type anisotropic slab.

This paper presents a comprehensive framework for the organization, retrieval, and adaptation of image information and meta-information in image database systems. The multi-level hierarchy of images that emphasizes the composition of visual entities (such as Human, Chair, , etc.) from its constituents (eye, leg, , etc.) is managed by a host architecture that is called the semantic tree. This architecture is shown to integrate description, numeric, and statistic image constituent's information into a compound space that is used as retrieval basis for semantic, sketch, and template image queries and several other composite query types. The core architecture based on which the semantic tree is constructed is shown to offer several new features such as simple prototyping, complex prototyping, low storage requirements, and automatic knowledge acquisition compatibility. The object oriented data model constitutes our comparison basis throughout the paper. Methods (functions) used to access image information are shown to be organized into a separate architecture called the query dictionary. This architecture is shown to offer a convenient hierarchical message passing medium using which a variety of composite queries are constructed. Interaction between semantic trees and the query dictionary is clarified through several examples. It is shown that the semantic tree architecture embraces additional networking semantic intormation through a range of relation representation models, the first of which is introduced in this paper. A new inheritance method called semantic relation spreading is introduced. Comprehensive examples are given to demonstrate the versatility of the new strategy.

This paper describes a method for predicting the user's next utterances in spoken dialog based on the topic transition model, named TPN. Some templates are prepared for each utterance pair pattern modeled by SR-plan. They are represented in terms of five kinds of topic-independent constituents in sentences. The topic of an utterance is predicted based on the TPN model and it instantiates the templates. The language processing unit analyzes the speech recognition result using the templates. An experiment shows that the introduction of the TPN model improves the performance of utterance recognition and it drastically reduces the search space of candidates in the input bunsetsu lattice.

A method of tone recognition has been developed for dissyllabic speech of Standard Chinese based on discrete hidden Markov modeling. As for the feature parameters of recognition, combination of macroscopic and microscopic parameters of fundamental frequency contours was shown to give a better result as compared to the isolated use of each parameter. Speaker normalization was realized by introducing an offset to the fundamental frequency. In order to avoid recognition errors due to syllable segmentation, a scheme of concatenated learning was adopted for training hidden Markov models. Based on the observations of fundamental frequency contours of dissyllables, a scheme was introduced to the method, where a contour was represented with a series of three syllabic tone models, two for the first and the second syllables and one for the transition part around the syllabic boundary. Corresponding to the voiceless consonant of the second syllable, fundamental frequency contour of a dissyllable may include a part without fundamental frequencies. This part was linearly interpolated in the current method. To prove the validity of the proposed method, it was compared with other methods, such as representing all of the dissyllabic contours as the concatenation of two models, assigning a special code to the voiceless part, and so on. Tone sandhi was also taken into account by introducing two additional models for the half-third tone and for the first 4th tone of the combination of two 4th tones. With the proposed method, average recognition rate of 96% was achieved for 5 male and 5 female speakers.

There are various difficulties in processing spoken dialogs because of acoustic, phonetic, and grammatical ill-formedness, and because of interactions among participants. This paper describes temporal characteristics of utterances in human-human task-oriented dialogs and interactions between the participants, analyzed in relation to the topic structure of the dialog. We analyzed 12 task-oriented simulated dialogs of ASJ continuous speech corpus conducted by 13 different participants whose total length being 66 minutes. Speech data was segmented into utterance units each of which is a speech interval segmented by pauses. There were 3876 utterance units, and 38.9% of them were interjections, fillers, false starts and chiming utterances. Each dialog consisted of 6 to 15 topic segments in each of which participants exchange specific information of the task. Eighty-six out of 119 new topic segments started with interjectory utterances and filled pauses. It was found that the durations of turn-taking interjections and fillers including the preceding silent pause were significantly longer in topic boundaries than the other positions. The results indicate that the duration of interjection words and filled pauses is a sign of a topic shift in spoken dialogs. In natural conversations, participants' speaking modes change dynamically as the conversation develops. Response time of both client and agent role speakers became shorter as the dialog proceeded. This indicates that interactions between the participants become active as the dialog proceeds. Speech rate was also affected by the dialog structure. It was generally fast in the initiating and terminating parts where most utterances are of fixed expressions, and slow in topic segments of the body part of the dialog where both client and agent participants stalled to speak in order to retrieve task knowledge. The results can be utilized in man-machine dialog systems, e.g., in order to detect topic shifts of a dialog, and to make the speech interface of dialog systems more natural to a human participant.

This paper describes the fabrication of 0.1 µm gate length CMOS devices and analysis of delay time by circuit simulation. In order to reduce the gate resistance, TiN capped cobalt salicide technology is applied to the fabrication of 0.1 µm CMOS devices. Gate sheet resistance with a 0.1 µm gate is as low as 5 Ω/sq. Propagation delay times of 0.1 µm and 0.15 µm CMOS inverter are 21 ps and 36 ps. Simulated propagation delay time agreed fairly well with experimental results. For gate length over 0.15 µm, intrinsic delay in CMOS devices is the main dalay factor. This suggests that increasing current drivability is the most efficient way to improve propagation delay time. At 0.1 µm, each parasitic component and intrinsic delay have similar contributions on device speed due to the short channel effect. To improve delay time, we used rapid thermal annealing or a high dose LDD structure. With this structure, drain current increases by more than 1.3 times and simulation predicted a delay time of 28 ps is possible with 0.15 µm CMOS inverters.

0.15 µm CMOS transistors have been fabricated. TiSi2 salicide was used for the gate electrode and source/drain to reduce parasitic resistance. Electron beam (EB) lithography was used for the gate patterning. Since the channel impurity was implanted only around the gate to reduce the junction capacitance, a reasonably short ring oscillator delay of 33 ps was obtained at 1.9 V supply voltage. The parasitic resistance and capacitance contribution on the delay time was analyzed by SPICE simulation. It was shown that the localized channel implant is effective for scaling the delay time and power consumption, because the source/drain size difficult to scale down to as small as the gate length.

The effects of Gaussian electromagnetic noise and non-Gaussian one on TV picture degradation are studied by using a composite noise generator which can control noise parameters. Three kinds of still pictures and four kinds of motion pictures are tested, and the picture degradation is subjectively evaluated with five-grade impairment scale. The tendency of the picture degradation against the every picture is almost the same. But MOS (Mean Opinion Score) between still picture and motion picture degradation is different in some measure when the power of burst noise is small.

A composite noise generator (CNG) is proposed for simulating the actual non-Gaussian noise and its applications are mentioned. Basing upon the actual measured result (APD) of induced noise from electric contact discharge arc, the APD is approximated by partial linearlization and shown that it can be simulated by a combination of plural Gaussian noise sources. Applying the CNG, quasi-peak (Q-P) detector is investigated and shown that the Q-P detector response is different for non-Gaussian noise when its time domain parameter is different even if its original APD is the same. For digital transmission error due to non-Gaussian noise, and for TV picture stained by the non-Gaussian noise, the CNG is applied to evaluate their performances and quality. The results obtained show that the CNG can be used as a standard non-Gaussian generator for several immunity tests for information equipments.

Considering the trend towards adopting high efficiency picture coding schemes into digital broadcasting services, we investigate objective picture quality scales for evaluating digitally encoded still and moving pictures. First, the study on the objective picture quality scale for high definition still pictures coded by the JPEG scheme is summarized. This scale is derived from consideration of the following distortion factors; 1) weighted noise by the spatial frequency characteristics and masking effects of human vision, 2) block distortion, and 3) mosquito noise. Next, an objective picture quality scale for motion pictures of standard television coded by the hybrid DCT scheme is studied. In addition to the above distortion factors, the temporal frequency characteristics of vision are also considered. Furthermore, considering that all of these distortions vary over time in motion pictures, methods for determining a single objective picture quality value for this time varying distortion are examined. As a result, generally applicable objective picture quality scale is obtained that correlates extremely well with subjective picture quality scale for both still and motion pictures, irrespective of the contents of the pictures. Having an objective scale facilitates automated picture quality evaluation and control.

The authors have studied mechanism of transition from metallic phase to gaseous phase in contact break arc. For further elucidation of the mechanism, we have carried out spectroscopic measurement. The spectrum measurement system which had high time resolution was composed using two monochromators and a bifurcated image fiber, which had one input port and two output ports. The input port received the arc light, and the two monochromators received the arc light from the two output ports, respectively. The spectral sensitivity of the two monochromators was corrected with a standard lamp. We have measured simultaneously two spectra of break arc for Ag in laboratory air, under the condition where source voltage E=48 V, load inductance L=2.3 mH, and closed contact current I0=6 A. As a result, the time-varying tendency of spectrum intensity is similar for the same element, even if the wavelength is different. And from the comparison of time average spectrum intensity, it is clarified that average intensity for gas spectrum does not attain to 10% of that for metallic atomic spectrum (Ag I, 520.91 nm). In addition, the decrease point of Ag II (ion) spectrum has been found to correspond with the peak of Ag I (atom) spectrum.

Fabrication methods of novel silicon quantum wires and dots using anisotropic wet chemical etching and thermal oxidation are newly proposed. The method realizes fine Si quantum wires, which are fully surrounded by the thermal SiO2 without any defects. The wires are straight and the Si/SiO2 interfaces are fairly flat. The 10 nm width wires are confirmed by Transmitting Scanning Microscopy observation in minimum size. The fine quantum dots are also fabricated using this method. The characteristics of the wires are investigated and the current oscillations in variation with the gate voltage are observed in low temperature. We believe the origin of these oscillations arise from one-dimensional subband conduction.

Three-dimensional display technologies that require special glasses are not suitable for telecommunications because wearing glasses is inconvenient and it is defficult to observe facial expressions. Our previous 6.3-inch 3D display was inadequate for presenting images with realistic sensation. In this paper, a direct view 15-inch 3D display is described. The display is made up of a l5-inch TFT LCD and a composite lenticular sheet (LS), and uses the head tracking technique. Quantitative evaluation of the stereoscopic sensation of the display was studied using the 3D display, and better stereoscopic sensation values were obtained compared with a 2D display mode, thus comfirming the display's usefulness.