Sharing data might bring the risk of disclosing the sensitive knowledge in it. Usually, the data owner may choose to sanitize data by modifying some items in it to hide sensitive knowledge prior to sharing. This paper focuses on protecting sensitive knowledge in the form of frequent itemsets by data sanitization. The sanitization process may result in side effects, i.e., the data distortion and the damage to the non-sensitive frequent itemsets. How to minimize these side effects is a challenging problem faced by the research community. Actually, there is a trade-off when trying to minimize both side effects simultaneously. In view of this, we propose a data sanitization method based on evolutionary multi-objective optimization (EMO). This method can hide specified sensitive itemsets completely while minimizing the accompanying side effects. Experiments on real datasets show that the proposed approach is very effective in performing the hiding task with fewer damage to the original data and non-sensitive knowledge.

By investigating the properties that the offsets should satisfy, this letter presents a brief proof of general QAM Golay complementary sequences (GCSs) in Cases I-III constructions. Our aim is to provide a brief, clear, and intelligible derivation so that it is easy for the reader to understand the known Cases I-III constructions of general QAM GCSs.

For an odd prime p and a positive integer r, new classes of binary sequences with period pr+1 are proposed from Euler quotients in this letter, which include several known classes of binary sequences derived from Fermat quotients and Euler quotients as special cases. The advantage of the new constructions is that they allow one to choose their support sets freely. Furthermore, with some constrains on the support set, the new sequences are proved to possess large linear complexities under the assumption of 2p-1 ≢ 1 mod p2.

In this paper, we study on an availability analysis for a multibase system with lateral resupply of spare items between bases. We construct a basic model that a spare item of a base is transported for operation to another base without spare upon occurrence of failure, and simultaneously, the base that supplies the spare item receives the failed item of the other base for repair. We propose an approximation method to obtain the availability of the system and show the accuracy of the solution through numerical experiments. Also, two modified models are constructed to show the efficiency of the basic model. The two models modify the assumption on the lateral resupply of spare items between bases in the basic model. We numerically illustrate that the basic model can increase the availability of the system compared with the two modified models through Monte Carlo simulation.

In this paper, we study a distributed time-reversal space-time block coded single-carrier (D-TR-STBC-SC) system for amplify-and-forward (AF) half-duplex relaying in frequency-selective Rayleigh fading channels. Under the imperfect channel estimation condition, we analyze the mean-square-error (MSE) performance of the optimal and channel-mismatched frequency domain minimum MSE (FD-MMSE) and least square (LS) equalization. Our analysis results show that, unlike the point-to-point communications, the channel-mismatched FD-MMSE equalization of D-TR-STBC-SC relaying network leads to the ceiling effect that the MSE increases as the signal-to-noise ratio (SNR) of relay-to-destination link increases. Decomposing the MSE, it is found that the primary cause of the ceiling effect is the source-to-destination link in the first time-slot, which makes the covariance matrix of noise vector ill-conditioned. In order to resolve the channel-mismatching problems in the equalization process, we develop optimum relay power control strategies by considering practical channel estimations, i.e., training-based LS and linear minimum MSE (LMMSE) channel estimations. It is shown that the optimum power control resolves the trade-off between MSE performance and relay power consumption, and improves the robustness against the channel-mismatching. Finally, we introduce a performance evaluation to demonstrate the performance of channel equalization combined with the proposed power controls in D-TR-STBC-SC relaying network.

This paper proposes a voice activity detection (VAD) algorithm based on an energy related feature of the frequency modulation of harmonics. A multi-resolution spectro-temporal analysis framework, which was developed to extract texture features of the audio signal from its Fourier spectrogram, is used to extract frequency modulation features of the speech signal. The proposed algorithm labels the voice active segments of the speech signal by comparing the energy related feature of the frequency modulation of harmonics with a threshold. Then, the proposed VAD is implemented on one of Texas Instruments (TI) digital signal processor (DSP) platforms for real-time operation. Simulations conducted on the DSP platform demonstrate the proposed VAD performs significantly better than three standard VADs, ITU-T G.729B, ETSI AMR1 and AMR2, in non-stationary noise in terms of the receiver operating characteristic (ROC) curves and the recognition rates from a practical distributed speech recognition (DSR) system.

In this paper, we propose a transmit multi-block frequency-domain equalization (MB-FDE) for frequency-domain space-time block coded joint transmit/receive diversity (FD-STBC-JTRD). Noting that a STBC codeword consists of multiple coded blocks, the transmit MB-FDE uses the multiple transmit FDE weight matrices, each associated with each coded block. Both single-carrier (SC) transmission and orthogonal frequency-division multiplexing (OFDM) transmission are considered. For SC transmission, the transmit MB-FDE weight matrices are jointly optimized so as to minimize the mean square error (MSE) between the transmit signal before STBC encoding and the received signal after STBC decoding. For OFDM transmission, they are jointly optimized so as to maximize the received signal-to-noise power ratio (SNR) after STBC decoding. We show by theoretical analysis that the proposed transmit MB-FDE can achieve 1/RSTBC times higher received SNR than the conventional transmit single-block FDE (SB-FDE), where RSTBC represents the code rate of STBC. It is confirmed by computer simulation that, when more than 2 receive antennas are used, MB-FDE can always achieve better BER performance than SB-FDE irrespective of the number of transmit antennas, and the channel frequency-selectivity.

This paper proposes a construction method of binary Z-periodic complementary sequence set (Z-PCSs) based on binary aperiodic complementary sequence pair (Golay pair) and interleaved technique. The constructed set is optimal or almost optimal with respect to the theoretical bound in different conditons. The set can be used in multi-carrier code division multiple access communication systems. The designed sequence has periodic complementary characteristics, which lead to a strong ability to resist multi-path interference and multiple access interference.

OSEK/VDX, a standard for an automobile OS, has been widely adopted by many manufacturers to design and develop a vehicle-mounted OS. With the increasing functionalities in vehicles, more and more complex applications are be developed based on the OSEK/VDX OS. However, how to ensure the reliability of developed applications is becoming a challenge for developers. To ensure the reliability of developed applications, model checking as an exhaustive technique can be applied to discover subtle errors in the development process. Many model checkers have been successfully applied to verify sequential software and general multi-threaded software. However, it is hard to directly use existing model checkers to precisely verify OSEK/VDX applications, since the execution characteristics of OSEK/VDX applications are different from the sequential software and general multi-threaded software. In this paper, we describe and develop an approach to translate OSEK/VDX applications into sequential programs in order to employ existing model checkers to precisely verify OSEK/VDX applications. The value of our approach is that it can be considered as a front-end translator for enabling existing model checkers to verify OSEK/VDX applications.

Two-track squeeze and adjacent track interference (ATI) are major barriers to increasing track density in hard disk drives (HDD). These depend on skew angles made by a magnetic head and circumferential direction on a magnetic disk. This paper describes relationships between the skew angle and the magnetic core width (MCW) which affects two-track squeeze and ATI performance. We propose a design concept of a track pitch profile at different skew angles considering MCW. Equivalent robustness of ATI performance on different skew angle conditions is obtained with the optimized track pitch.

Radio channel modeling is fundamental for designing wireless communication systems. In millimeter or sub-millimeter wave short range communication, shadowing effect by electrically-large objects is one of the most important factors determining the field strength and thus the coverage. Unfortunately, numerical methods like MoM, FDTD, FEM are unable to compute the field scattered by large objects due to their excessive time and memory requirements. Ray theory like geometrical theory of diffraction (GTD) by Keller is an effective and popular solution but suffers various kinds of singularities at geometrical boundaries such as incidence shadow boundary (ISB) or reflection shadow boundary (RSB). Modified edge representation (MER) equivalent edge current (EEC) is an accurate and a fast high frequency diffraction technique which expresses the fields in terms of line integration. It adopts classical Keller-type knife-edge diffraction coefficients and still provides uniform and highly accurate fields everywhere including geometrical boundaries. MER is used here to compute the millimeter-wave field distribution in compact range communication systems where shadowing effects rather than multi-path ones dominate the radio environments. For further simplicity, trigonometric functions in Keller's diffraction coefficients are replaced by the path lengths of source to the observer via the edge point of integration of the scatterers in the form of Fresnel zone number (FZN). Complexity, Computation time and the memory were reduced drastically without degrading the accuracy. The dipole wave scattering from flat rectangular plates is discussed with numerical examples.

The theoretically minimum length of a signal for fundamental frequency estimation in a noisy environment is discussed. Assuming that the noise is additive white Gaussian, it is known that a Cramér-Rao lower bound (CRLB) is given by the length and other parameters of the signal. In this paper, we define the minimum length as the length whose CRLB is less than or equal to the specific variance for any parameters of the signal. The specific variance is allowable variance of the estimate within an application of fundamental frequency estimation. By reformulating the CRLB with respect to the initial phase of the signal, the algorithms for determining the minimum length are proposed. In addition, we develop the methods of deciding the specific variance for general fundamental frequency estimation and pitch estimation. Simulation results in terms of both the fundamental frequency estimation and the pitch estimation show the validity of our approach.

In a previous paper, we proposed a rescue support system for victims buried in an earthquake disaster by constructing an ad-hoc network using home-server based smart homes. However, this system has the following two problems: i) it cannot ensure sufficient density of home servers to realize adequate WLAN coverage, ii) the system does not consider areas in which home servers cannot be used such as parks and factories, for example. In this paper, we propose a new method using a delay tolerant network (DTN) technique. In this method, rescuers (such as rescue teams) with mobile devices relay information between disconnected networks by walking around during rescue activities. For a performance evaluation, we performed simulation experiments using a map of Abeno-ku, Osaka. From our results, we show that the proposed method increases the information acquisition rate, and that the network can be maintained. We also quantitatively show the penetration rate of smart homes needed for our system. In addition, we show that the rescue request system is more effective than other systems, and the method with the mobile device relay is better than without this method.

In the log-likelihood ratio (LLR) domain, the belief propagation (BP) decoding algorithm for polar codes incurs high computation complexity due to the computation of the hyperbolic functions in the node update rules. In this paper, we propose a linear approximation method based on the principle of equal spacing to simplify the hyperbolic functions in the BP decoding algorithm. Our method replaces the computation of hyperbolic functions with addition and multiplication operations in the node update rules. Simulation results show that the performance of the modified BP decoding algorithm is almost the same as the original BP decoding algorithm in the low Signal to Noise Ratio (SNR) region, and in the high SNR region the performance of our method is slightly worse. The modified BP decoding algorithm is only implemented with addition and multiplication operations, which greatly reduces computation complexity, and simplifies hardware implementation.

Several models of feed-forward complex-valued neural networks have been proposed, and those with split and polar-represented activation functions have been mainly studied. Neural networks with split activation functions are relatively easy to analyze, but complex-valued neural networks with polar-represented functions have many applications but are difficult to analyze. In previous research, Nitta proved the uniqueness theorem of complex-valued neural networks with split activation functions. Subsequently, he studied their critical points, which caused plateaus and local minima in their learning processes. Thus, the uniqueness theorem is closely related to the learning process. In the present work, we first define three types of reducibility for feed-forward complex-valued neural networks with polar-represented activation functions and prove that we can easily transform reducible complex-valued neural networks into irreducible ones. We then prove the uniqueness theorem of complex-valued neural networks with polar-represented activation functions.

In order to tackle the rapidly increasing traffic, the 5th generation (5G) mobile communication system will introduce small cells using higher frequency bands with wider bandwidth to achieve super high bit rate transmission of several tens of Gbps. Massive multiple input multiple output (MIMO) beamforming (BF) is promising as one of the technologies that can compensate for larger path-loss in the higher frequency bands. Joint analog fixed BF and digital precoding have been proposed to reduce the cost of a Massive MIMO transceiver. However, the conventional scheme assumes the transmission of a few streams using well-known codebook-based precoding as the digital precoding, and both a selection method of the fixed BF weights and a digital precoder design, which are suitable for super high bit rate transmission using multiple streams, have not been studied. This paper proposes a joint fixed BF and CSI-based precoding (called FBCP) scheme for the 5G Massive MIMO systems. FBCP first selects the analog fixed BF weights based on a maximum total received power criterion, and then it calculates an eigenmode (EM) precoding matrix by exploiting CSI. This paper targets a 5G system achieving over 20Gbps in the 20GHz band as one example. Throughput performances of the Massive MIMO using the proposed FBCP are evaluated by link level simulations using adaptive modulation and coding and it is shown that the proposed FBCP with the optimum number of selected beams (baseband chains) can use higher level modulation, up to 256QAM, and higher coding rates and achieve throughputs close to 30Gbps while the cost and complexity can be reduced compared with the fully digital Massive MIMO.

Open-loop (OL) transmit diversity is more subject to the influence of channel estimation error than closed-loop (CL) transmit diversity, although it has the merit of providing better performance in fast Doppler frequency environments because it doesn't require a feedback signal. This paper proposes an OL transmit diversity scheme combined with intra-subframe frequency hopping (FH) and iterative decision-feedback channel estimation (DFCE) in a shared channel for discrete Fourier transform (DFT)-precoded orthogonal frequency division multiple access (OFDMA). We apply intra-subframe FH to OL transmit diversity to mitigate the reduction in the diversity gain under high fading correlation conditions among antennas and iterative DFCE to improve the channel estimation accuracy. Computer simulation results show that the required average received signal-to-noise power ratio at the average block error rate (BLER) of 10-2 of the space-time block code (STBC) with intra-subframe FH is reduced to within approximately 0.8dB compared to codebook-based CL transmit diversity when using iterative DFCE at the maximum Doppler frequency of fD =5.55Hz. Moreover, it is shown that STBC with intra-subframe FH and iterative DFCE achieves much better BLER performance compared to CL transmit diversity when fD is higher than approximately 30Hz since the tracking ability of the latter degrades due to the fast fading variation in its feedback loop.

A re-configurable wavelength de-multiplexer for wave-length-division-multiplexed (WDM) radio-over-fiber (RoF) systems, which is specially designed for delivering frequency-modulated continuous-wave (FM-CW) signals, is newly developed. The principle and characteristics of the developed de-multiplexer are described in detail. Then the de-multiplexing performances of 4-channel WDM 32-GHz-band, 8-channel WDM 48-GHz-band, and 5-channel WDM 96-GHz-band FM-CW RoF signals are evaluated with the de-multiplexer.

In this study, we propose a two-step approach to evaluate electromagnetic interference (EMI) with a wearable vital signal sensor. The two-step approach combines a quasi-static electromagnetic (EM) field analysis and an electric circuit analysis, and is applied to the EMI evaluation at frequencies below 1 MHz for our developed wearable electrocardiogram (ECG) to demonstrate its usefulness. The quasi-static EM field analysis gives the common mode voltage coupled from the incident EM field at the ECG sensing electrodes, and the electric circuit analysis quantifies a differential mode voltage at the differential amplifier output of the ECG detection circuit. The differential mode voltage has been shown to come from a conversion from the common mode voltage due to an imbalance between the contact impedances of the two sensing electrodes. When the contact impedance is resistive, the induced differential mode voltage increases with frequency up to 100kHz, and keeps constant after 100kHz, i.e., exhibits a high pass filter characteristic. While when the contact impedance is capacitive, the differential mode voltage exhibits a band pass filter characteristic with the maximum at frequency of around 150kHz. The differential voltage may achieve nearly 1V at the differential amplifier output for an imbalance of 30% under 10V/m plane-wave incident electric field, and completely mask the ECG signal. It is essential to reduce the imbalance as much as possible so as to prevent a significant interference voltage in the amplified ECG signal.

Due to the fact that natural images are approximately sparse in Discrete Cosine Transform (DCT) or wavelet basis, the Compressive Sensing (CS) can be employed to decode both the host image and watermark with zero error, despite not knowing the host image. In this paper, Limited-Random Sequence (LRS) matrix is utilized to implement the blind CS detection, which benefits from zero error and lower complexity. The performance in Bit Error Rate (BER) and error-free detection probability confirms the validity and efficiency of the proposed scheme.