We studied three types of lasers emitting narrow beam divergence of output light: 1) a spot-size converter integrated laser diodes (SS-LDs) with a vertically tapered waveguide, 2) one with a laterally tapered waveguide, and 3) one consisting of a small cross section of active region. We compared them with regard to their performance in coupling efficiency to a cleaved single mode fiber, threshold current, output power, and reliability. Both the spot-size converted integrated lasers with vertically and laterally tapered waveguide repeatedly provided low threshold currents of as low as 6 mA and low coupling loss to the fiber of 1.2 to 2.5 dB in two inch wafer processes. As a result of the aging test, the SS-lasers were predicted to have the same degradation rate as a conventional buried heterostructure laser. The laser having a small cross section of active layer also has low coupling loss and high efficiency up to 85.

Narrow-beam and low threshold current characteristics have been realized for a 1.3 µm FS-BH (Facet Selective growth Buried Heterostructure) laser diode monolithically integrated with a tapered waveguide lens by a selective area epitaxial growth technique. The beam divergences in the perpendicular and horizontal directions have been reduced down to about 12. By the introduction of the strained quantum well structure and the optimized cavity structure, the threshold current has been kept as low as 6 mA which is comparable to the conventional Fabry-Perot laser diodes. Even at high temperature as high as 85, the threshold current and the operation current (P=10 mW) have been suppressed to as low as 23 mA and 63 mA, respectively. Furthermore error-floor-free characteristics for 622 Mbps-50 km transmission have been confirmed under severe optical feedback condition.

In this paper, we propose a new transaction numbering scheme and a new validation scheme for controlling transactions optimistically in client-server architectural mobile distributed database systems (MDDBSs). In the system, mobile units (MUs) request transaction-related services, e.g., concurrency control, commit process, then the mobile support stations (MSSs) provide the required services. The mobile computing environment makes it very difficult for each MU to assign unique transaction number to transactions since it is allowed to move in communication disconnected states. Besides, validating transactions numbered by the previous transaction numbering scheme could wait indefinitely in the case of data transfer delay. Thus, we propose a new transaction numbering scheme called datatransfer time oriented transaction numbering scheme (DATTO) ,in which we can remove waiting time for validation by determining validation-start time with data-transfer completion time. However, if the previous validation scheme for the static environment is directly applied transactions numbered by DATTO, undesirable results could occur in abnormal cases due to latency on the wireless communication. Thus, we also propose a new validation scheme, called commit-order oriented validation (COOV) ,which is always able to produce correct results by applying backward validation to the abnormal cases.

At present, the widespread use of optoelectronic components is restricted by their high cost. Up to 90% of the cost of a semiconductor laser is in the packaging, with the fibre-chip alignment the major part. In this paper, an approach to low cost packaging is described, which uses an integrated mode size transformer to match the laser output to the fibre mode. This improves the alignment tolerance of the laser-fibre coupling by more than a factor of three, allowing simple passive alignment approaches to be used. It requires only minor modification to the processing of a standard buried heterostructure laser, and allows the coupling efficiency to be optimised without compromising the performance of the laser. The design of a silicon submount for passive laser-fibre alignment is described and coupling losses as low as 1.2 dB to standard cleaved single mode fibre are reported. The technology that has been developed is generic and its successful application to other optoelectronic devices such as fibre grating lasers, semiconductor optical amplifiers and laser arrays is described.

For finite Volterra series systems, this paper investigates the stability of the exact model matching (EMM) control we have already presented. First, in order to analyze the stability of the EMM system, we present modified small gain theorems depending on the magnitude of the external input (s) in the cases of one input and two inputs. Next, with the help of the theorem for feedback systems with two inputs, we clarify the condition under which the control system is stable for the reference input magnitude within a certain range, and is also robust for small disturbances. The modified small gain theorems are effective for the stability analysis of the nonlinear feedback control systems which do not have affine finite gain.

A wavelength tunable DBR laser monolithically integrated with an EA-modulator as a WDM system light source was fabricated by selective area MOVPE growth. The lasing wavelength and band-gap energy were simultaneously controlled on the same epitaxial wafer by using a modulated grown thickness of InGaAsP/InGaAsP MQW layers. A wavelength tuning range of 3.5 nm, an output power of 3 mW, and an extinction ratio of 14 dB for 3 V were achieved. The measured 3 dB frequency bandwidth was 2 GHz. No significant change in modulation characteristics were observed when wavelength tuning by injecting the current into the DBR.

This paper describes the technological issues in achieving a low-cost hybrid WDM module for access network systems. The problems which should be resolved in developing a low-cost module are clarified from the viewpoint of the module assembly in mass production. A design concept for a low-cost module suitable for mass production is indicated, which simplifies the alignment between a laser diode and a waveguide, and reduces the number of the components such as lenses and mirrors. The low-cost module is achieved by employing a flip-chip bonding method with passive alignment using a spot-size converter integrated laser diode (SS-LD) and p-i-n waveguide photodiodes (WGPDs) on a planar lightwave circuit (PLC) platform. We confirm that the SS-LD and the WGPD provide high coupling efficiency with a large tolerance for passive alignment. To achieve a high-sensitivity receiver, the module is designed to employ an asymmetric PLC Y-splitter that prefers a PD responsivity to an LD output power because of the high-coupling efficiency of the LD, and to employ a bare preamplifier mounting to reduce the parasitic capacitance into a preamplifier. We also demonstrate the dynamic performance for a 50-Mb/s burst signal, such as a high sensitivity, an instantaneous AGC response, and a small APC deviation of the transceiver.

Laser module fabricated with silicon platform technology is very attractive for low-cost modules. The technology enables passive optical alignment of an LD to an optical fiber. Our marker design for passive alignment allows positioning accuracy within 1 µm of LD. However, coupling efficiency is a key issue because that by conventional butt coupling scheme is low with about 10 dB coupling loss. We investigated optical coupling characteristics in various types of coupling scheme: conventional flat end fibers, cone fibers, integrated GRIN rod lenses on the platform and the coupling with new-type LDs integrated with spot size transformer. Improvement of coupling efficiency with 3 dB and 7.5 dB compared to flat-end fiber is achieved by using the cone fiber and the GRIN rod lens, respectively, although 1-dB coupling tolerances for alignment deteriorated with these schemes. We obtained high efficient coupling with 3.5 dB coupling loss and wide alignment tolerance of 2.3 µm simultaneously with a new-type LD integrated with spot size transformer owing to its expanded spot size characteristics.

We have developed an easily-assembled optical coupling device which consists of two multifiber array connectors and a single-mode planar waveguide chip whose ends are passively positioned in novel plastic plug components compatible with the multifiber array connectors. The assembled 18 splitter device exhibits a low exess loss of 0.8 dB.

In a conventional client-server system using the satellite communications, the responsibility of the system to the client user is considerably degraded by the long transmission time between the satellite and the ground terminal as well as the relatively low data transmission rate in comparison with the ground transmission line as the Ethernet. In this paper, a new client-server control, VEEC, is proposed to solve the problem. As a result of the experimental performance studies, it is clarified that the responsibility in the client is remarkably improved when the pre-fetching mechanism of VEEC works efficiently.

Periodic reservation allows periodic and random packets to share the same satellite random access channel efficiently. The periodic reservation protocol is particularly suitable for mobile satellite position reporting services, where some of the information messages, such as dispatch function, are classified as "periodic" and others, such as signaling, are classified as "random." When a new mobile terminal logs on to the system, Network Management Center (NMC) reserves subsequent time slots for transmitting periodic packets without contention. A mobile terminal recognizes each time slot as "reserved" or "unreserved (available)" according to the broadcast message received from NMC. Other random packets use the slotted ALOHA protocol to contend with other mobile terminals for an unreserved time slot. The performance results suggest that the use of the periodic reservation protocol can be regarded as a viable solution for mobile satellite position reporting services such as automatic dependent surveillance (ADS).

This paper evaluates the performance of DS/CDMA with diversity coding and multiuser interference (MUI) cancellation in fading multipath channel. The diversity technique considered in this paper, is different from the conventional scheme and transmits different information over different channels. It is shown that, this diversity scheme performs better than conventional diversity scheme, and when combined with MUI cancellation provides significant performance improvement. Effects of partial band jamming on the system are also considered.

The paper discusses the possibility of building semiconductor lasers whose wavelength stays nearly constant with ambient temperature variation. Several factors affecting the lasing wavelength change with temperature variation in both distributed feedback lasers and Fabry-Perot lasers are addressed and the optimum design of bandgap temperature dependence for the active layer material is discussed. It is pointed out that the most important challenge we face in building temperature-insensitive wavelength lasers is the development of a temperature-insensitive bandgap material for the active layer. Based on published data, it is speculated that such a laser could be developed using a Hg1-xCdxTe/CdTe double heterostructure. Although no data is available yet, we expect a Ga1-xInxAs1-yBiy III-V alloy semiconductor can be used for this purpose. Recently reported T1xIn1-x-yGayP III-V alloy semiconductor might be another promising candidate. Such lasers will greatly advance applications of WDM (Wavelength-Division-Multiplexing) technology to optical fiber communication systems and contribute to network innovations.

Memory Sharing Processor Array (MSPA) architecture has been developed as an effective array processing architecture for both reduced data storages and increased processor cell utilization efficiency [1]. In this paper, the MSPA design methodology is extended to the VLSI synthesis of a serial input processor array (Pa). Then, a new bit-serial input multiplier and a new data serial input matrix multiplier are derived from the new PA. These multipliers are superior to the conventional multipliers by their smaller number of logic-gate count.

Mechanism of the noise generation caused by the optical feedback in semiconductor laser was experimentally determined. Two types of the mode competition phenomena were confirmed to be the generating mechanisms. Applicability of the self-sustained pulsation to be a noise reduction method was also discussed.

One of the functions that should be provided in ATM LANs is multicast communication. For multicast communication on ATM LANs, the architecture of switch fabric and protocols for signaling have been studied. However, when data communication using a multicast connection such as LAN emulation service is provided, ABR service on a multicast connection (Multicast ABR) is also required. ABR service has been actively discussed in the ATM forum. Unfortunately, the study on flow control mechanism for Multicast ABR is not enough. This paper discusses the suitable flow control mechanism for Multicast ABR and shows its performance.

Preliminary experiments on non-destructive quantitative analysis of water vapor density in halogen lamps have been carried out. A working curve showing a relation between absorbance and water vapor density was successfully obtained by using frequency-stabilized InGaAsP/InP semiconductor laser spectrometric system.

We have recently discovered a novel phenomenon for the fabrication of nanostructures. A self-organization phenomenon of a strained InGaAs/AlGaAs system on a GaAs (311)B substrate during metal-organic vapor phase epitaxial growth is described, and nano-scale confinement lasers with self-organized InGaAs quantum disks are mentioned. Low-threshold operation of strained InGaAs quantum disk lasers is achieved under a continuous-wave condition at room temperature. The threshold current is around 20 mA, which is consider-ably lower than that of a reference double-quantum-well laser on a GaAs (100) substrate grown side-by-side. However, the light output versus the driving current exhibits a pronounced tendency towards a saturation compared to that of the (100) quantum well laser. We also discuss new methods using self-organization for nanofabrication to produce high-quality low-dimensional optical devices, considering requirements and the current status for next-generation optical devices.

We discuss fabrication of InGaAs quantum dot structures using the self-assembling growth technique with the Stranski-Krastanow growth mode in MOCVD, including optical ploperties of the nano-structures. The formation process of the quantum dot islands was clarified by observing the samples grown under various conditions with an atomic force microscope. A trial for self-alignment of the quantum dots was also investigated. On the basis of these results, as the first step toward the ultimate semiconductor lasers in which both electrons and photons are fully quantized, a vertical microcavity InGaAs/GaAs quantum dot laser was demonstrated. Finally a perspective of the quantum dot lasers is discussed, including the bottleneck issues and the impact of the quantum dot structures for reducing threshold current in wide bandgap lasers such as GaN lasers.

The multichannel distortions of direct modulated laser diode were studied from the view point of rate equations. A novel technique for compensating the composite second order distortion (CSO) was proposed. Meanwhile, the related calibration procedures were indicated. After the compensation, 10 dB improvement in CSO was obtained