This paper discusses two approaches to statistical multiplexing: rate envelope multiplexing, allowing resource sharing with small delays for low peak rate connections, and rate sharing, based on the use of large multiplexer buffers to ensure high link utilization for high speed data traffic. We argue that the weighted fair queueing scheduling algorithm provides an efficient means for combining both kinds of multiplexing in the B-ISDN. A feasible implementation known as Virtual Spacing is outlined. We illustrate the flexibility of the proposed scheme by showing how different service categories could be provided.

Data communication by using TCP/IP is one of important services on ATM networks. At one approach in traffic control of this service, the dedicated bandwidth for data transfer is not guaranteed and the feedback congestion control to prevent cell loss is performed in the congestion case. However, when a large quantity of data is transferred within a short period, this traffic control cannot be expected to achieve high efficiency. In this case, it is suitable that the dedicated bandwidth is guaranteed by FRP (Fast Reservation Protocol) before the data is transferred. This paper describes that FRP is superior to the feedback congestion control for large size data transmission. Next, it proposes a selectable traffic control which selects adaptively one of the feedback congestion control and FRP.

The performance of a nonblocking switch with two kinds of correlated input calls is analyzed. We define two kinds of calls as the waiting call and the immediate call, and assume that the immediate call has the priority over the waiting call. If the traffic density of one kind of calls is larger than maximum throughput, the ratio of the corresponding kind of calls to the total traffic must be restrained in some range. We derive the maximum ratio of the waiting call by using two approximate methods. The effects of traffic densities and transition probabilities of two kinds of calls on the maximum ratio of the waiting call are also considered. It is shown that, if the traffic density of the immediate call is smaller than that of the waiting call, our approximate methods are useful to derive the maximum ratio of the waiting call to the total traffic.

Recently as one of attractive applications in the B-ISDN era, LAN/MAN interconnection through an ATM network has been coming up because burstiness of LAN/MAN data traffic is applicable to distinctive features of cell based ATM network. In order to overcome a difference of the connection mode, i.e., CL packet transfer of LAN/MAN and CO cell transfer of ATM network, a number of interworking and bandwidth allocation mechanisms have been proposed. These methods, however, indicate both merits and drawbacks concerning with CL data transfer quality, network resource efficiency and processing overhead in IWU/CLS and the network, and have been mostly evaluated only for a single IWU model. This paper aims at showing the most appropriate method of LAN/MAN interworking for IWU-IWU or IWU-CLSF connection. In the paper, some interworking issues including a general qualitative assessment are clarified. We then evaluate the selected five interworking methods based on Bandwidth Renegotiation (BR) and VC Establishment (VCE), which are combined with Traffic Enforcement Functions (TEFs) based on policing mechanisms and Cell Loss Control (CLC) scheme. By transient and stationary simulation approach for a single IWU and an IWU-CLS connection model, the most applicable method is indicated as a case study from view points of the communication quality, effective use of the bandwidth and processing load.

The blazing effects of dielectric grating consisting of two adjacent sinusoidally modulated layers which lead to the asymmetric profiles on a substrate are analyzed by using improved Fourier series expansion method. This method can be applied to the wide range of grating structure and gave high accurate results by comparing with those obtained by previous method. In this paper, the efficient blazing effects can be achieved by varying normalized distance (w/p) and the normalized thickness (d1/D), where D is kept fixed. The results are greater than those of trapezoidal profiles and triangular profiles. The influences of the second order of modulation index on the radiation efficiencies and normalized leakage factor are also discussed.

We define a new framework for rewriting graphs, called a formal graph system (FGS), which is a logic program having hypergraphs instead of terms in first-order logic. We first prove that a class of graphs is generated by a hyperedge replacement grammar if and only if it is defined by an FGS of a special form called a regular FGS. In the same way as logic programs, we can define a refutation tree for an FGS. The classes of TTSP graphs and outerplanar graphs are definable by regular FGSs. Then, we consider the problem of constructing a refutation tree of a graph for these FGSs. For the FGS defining TTSP graphs, we present a refutation tree algorithm of O(log2nlogm) time with O(nm) processors on an EREW PRAM. For the FGS defining outerplanar graphs, we show that the refutation tree problem can be solved in O(log2n) time with O(nm) processors on an EREW PRAM. Here, n and m are the numbers of vertices and edges of an input graph, respectively.

Long-wavelength 1.3 µm GaInAsP/InP vertical cavity surface-emitting lasers (VCSELs) have been demonstrated in an array configuration. With the strong current confinement by a buried heterostructure and the efficient optical feedback by a dielectric cavity, five VCSEL elements in a 24 array operated at room temperature with 5 mW total power output and wavelength error within 5%. The stacked planar optics including the VCSEL array is a promising optical transmitter in ultra large scale parallel optical communication systems.

Laser diodes for optical interconnections are ideally high speed, work over a wide temperature range, and are simple to bias. This paper reports high bit-rate modulation with nearly zero bias with very low threshold 1.3µm-wavelength laser diodes over a wide temperature range. At the high temperature of 80, lasing delay was 165 ps with nearly zero bias. We demonstrated 2.5 Gbit/s modulation over a wide temperature range. Eye opening was over 34% of one time slot.

This paper deals with the information leakage measurement in a distributed computation protocol called SASC. The SASC protocol is a kind of two-party protocol between a client and a server. The computation for RSA cryptosystem is the target of this paper. This paper shows that a secure RSA-SASC protocol proposed recently could be changed to be insecure if the client which has secret information were to complain about the computation result. This paper first clarifies how to measure the information amount which leaks through the protocol. It, then, shows an attack procedure to make use of the client's complaint. Effectiveness of the attack procedure is measured by the information theoretic measure. By using the same measure, it is shown that some attacks do not work to derive the client's secret. It is also shown that a practical countermeasure to limit the number of incorrect computation allowed is effctive to limit the leakage of the secret information to some reasonable extent.

Telecommunications management is essentially an aggregation of a wide range of activities, including operations and management (O & M) of telecommunications services and customers as well as the network and network elements. During the period of rapid growth in telecommunications, the highest priority was to meet increasing market demand and to construct a telecommunications network infrastructure. Therefore, research and development in telecommunications management were subordinated to the evolution of telecommunications services and systems. Recently, customers have been demanding higher quality services, as a variety of new, advanced services have been introduced. This has led to the need to integrate telecommunications services and O & M services. This paper first reviews the history of the development of telecommunications O & M in parallel with the progress of telecommunications in Japan and clarifies specific features in each step of this progress. This analysis identifies urgent problems and their solutions. The results suggests that telecommunications O & M and O & M services should be considered as a key to making future services possible and to the value of those services in a multi-media telecommunications services environment. Based on these studies, the future direction of O & M is then shown, focusing on cooperative O & M involving the customer in the multi-media, multidomain telecommunications environment.

Self-modelocking of Ti:sapphire laser has obtained with less than 2 W of argon-ion laser pumping. Two independent lasers with 36 fsec and 63 fsec in pulse duration were operated by a 6 W pump laser. In the low-threshold lasers, not only an ordinary mode-locking but also a double-pulse mode-locking, where two pulses circulating in the cavity, was stable.

The improved point-matching method with Mathieu function expansion for the accurate analysis of the W-type elliptical fiber with layers of any ellipticity is proposed. Results of our method are reliable, because we expand the electromagnetic fields by a sum of the complete set of wave functions in each layer of the fiber. Numerical results are presented for the highly-birefringent fibers with a hollow layer outside an elliptical core. It is found that such fibers can realize the large value of the modal birefringence as well as they can be suitable for the single-mode and single-polarization transmission. From the convergence tests, it is confirmed that the relative error of the modal birefringence is less than 0.01%. The comparison of our results with those by previously reported method is presented. The proposed method can be extended for analysis of the elliptical-core fibers with hollow pits and electromagnetic scattering by targets of the complex elliptical geometry.

A novel total harmonic distortion (THD) measuring technique is proposed. A modified Volterra series using harmonics in place of powers of the sinusoidal input is used to identify the nonlinear models of the source and the device under test (DUT). The least-mean square (LMS) adaptive algorithm is applied for identification. While maintaining comparable speed and accuracy this technique provides a more flexible test procedure than conventional methods, in terms of the frequency resolution, the number of samples, and the sampling rate. It outperforms conventional methods when there is a bin energy leakage, which occurs in a non-coherent system. In addition, it is real-time computing while other conventional methods post process blocks of data. Simulation results collaborate the analytical results.

FM laser operation of a Ti:sapphire laser is studied experimentally for the first time with an internal phase modulator. We obtained extremely wide FM sidebands of 8 THz width whose phase modulation index was 25,000 rad at a modulation frequency of 160 MHz.

Managed Objects (MOs) can be specified by the combination of a static information model and a dynamic process model. First, this paper presents a mapping of attributes from a process model diagram to an information model diagram. Then, it introduces a concept of topology into these two models and proposes a hypothesis about the relationship of topology in these two models. To explicitly explain the hypothesis, it can be stated that all attributes of incoming or outgoing data related to a process in a process model are mapped to an information model where these attributes are interconnected by an explicit relationship which corresponds to a specific meaning, such as physical containment or logical connection. From an intuitive perspective, it can be said that if two attributes have a close topological relationship in a process model, the mapped attributes also have a close topological relationship in an information model. This hypothesis provides clues for determining whether there is an error in an attribute either in the process model or in the information model. By examining the way attributes of incoming or outgoing data related to a process are mapped to an information model, we can detect whether there is an error with respect to the process. The error correction is performed with the assistance of probability analysis. The method of error detection and correction can be implemented in a computer aided tool. Then, error detection on the attribute level becomes automatic, and error correction on the attribute level becomes interactive through the computer aided tool. Finally, the validity of the hypothesis is confirmed by analyzing ITU-T Recommendation M.3100. The specification of the fabric object class defined in M.3 100 is transformed into these two models and the hypothesis is validated for the analysis of the mapping between these two models.

Most current management systems employ graphic-user-interface displays to visualize the networks being managed. Some networks are so large that it is difficult to display all network elements in a single window alone, and therefore, the hierarchical multi-window style presentation is commonly used. This form of presentation has disadvantages, however, including the fact that window manipulations are complex. Our approach (bifocal network visualization) is able to display both the context and any detail of a network within a single window, and overcomes the disadvantages of hierarchical multi-window presentation. We implemented this bifocal network visualization on a workstation using a frame buffer memory called DUALQUEST that is able to generate images in real-time and is simple to operate. This paper describes bifocal network visualization and its implementation. Furthermore, we present an experiment to compare our interface with conventional hierarchical multi-window presentation.

We describe an application of InGaAs/AlGaAs VCSELs to multiple wavelength light source for optical interconnection. A flip-chip bonding technique is used to integrate the VCSELs lasing at different wavelengths. The integrated VCSELs of different wavelengths are individually grown and processed, so that one can optimize the device characteristics and the wavelength separation or distribution for multiple wavelength interconnection systems. A 9-wavelength VCSEL array with a wavelength separation of 5 nm has been successfully fabricated.

Trouble management is a key function in solving the problems and maintaining the high communications capability of a network when communication service network users encounter problems in the quality of services [1]. This paper proposes technologies and architecture for an intelligent management system to achieve advanced service/network trouble management. The system generates operation scenarios to find a cause to solve a reported trouble, executes them, and modifies them according to operation circumstance changes. In the scenario execution process, fault propagation simulation is used to isolate a fault in necessary cases. The evaluation of the system applied to the ISDN services shows that the proposed system can achieve high-speed, precise trouble management by the integrated cooperative work of a human (operator) and a machine (operation system).

A simple method is presented to calculate the parasitic capacitance effect in the propagation delay of series-connected MOS (SCM) structures. This method divides SCM circuits into two parts and accurately calculates the contribution of each part to the difference from the delay without parasitic capacitances.

A new rate-controlled queueing discipline, called virtual rate-based queueing (VRBQ), is proposed for packet-switching nodes in connection-oriented, high-speed, wide-area networks. The VRBQ discipline is based on the virtual rate which has a value between the average and peak transmission rates. By choosing appropriate virtual rates, various requirements can be met regarding the performance and quality of services in integrated-service networks. As the worst-case performance guarantee, we determine the upper bounds of queueing delay when VRBQ is combined with an admission control mechanism, i.e., Dynamic Time Windows or Leaky Bucket. Simulation results demonstrate the fairness policy of VRBQ in comparison with other queueing disciplines, and the performance of sources controlled under different virtual rates.