Hikaru YAGI Masanobu FUJIOKA Yasushi WAKAHARA
In this paper, the software structure for telecommunication user support are discussed, and it is proposed to apply knowledge processing technology to the software. Capabilities of telecommunications networks are becoming quite complicated, and the number of service items and parameters which have to be selected and memorized will become too large for telecommunications end users to make full use of the network capabilities. As such, more effort should be focused on assisting telecommunications end users to use the network and providing user friendly human interfaces of the network. However, this kind of software has additional type of requirements other than those for protocol handling software and call control software, and the realization of such support software has not yet been fully studied. To realize such support software, this paper stressed the realization of the user-system interface. Especially identified in this paper are meaning-based interpretation of user inputs to permit the handling of synonyms and multivocations, and a method to access the database in the support system without consideration of its data schema. To satisfy these objectives, this paper has proposed that the application data should be represented in both a character string and a meaning representation, and that the thesauruses should have the attribute-value relation. In line with these studies, an experimental system called CAPRIS (CAlling PRocedure Instruction System) was developed. It is used to assist the calling party in a telecommunications network to find an appropriate contact point depending on the purpose of the communication. Implementation of CAPRIS is completed and it was confirmed that all the functions described in this paper were actually realized. Some functional experiments were performed on CAPRIS, and the system was concluded to realize satisfactory user-friendliness.
This paper surveys modeling techniques for telephone call control based on a Finite State Machine (FSM) concept, and studies model simplification techniques. First, the basic concept and fundamental issues of call control modeling are described. Then, based on the analysis of layered call control configuration, it is clarified that the call control machine decomposition within the two-party service control layer has the effect of reducing the apparent size of each mate's machine. Using this effect, guidelines for call control modeling are derived, by which multiple services can be modeled independently. Finally implementation techniques and a few examples of application will be presented.
Chiaki TAKANO Kiyoshi TANAKA Akihiko OKUBORA Jiro KASAHARA
We have successfully developed an optical receiver and a laser driver circuit which were implemented with 0.35 µm GaAs JFETs (junction Field Effect Transistors). The 0.35 µm GaAs. JFET had the typical transconductance of 480 mS/mm with small drain conductance. An interdigit MSM (Metal Semiconductor Metal) -type photodetector and the JFETs were monolithically integrated on a GaAs substrate for the optical receiver. The fabricated optical receiver demonstrated Gb/s operation with a very low power consumption of 8.2 mW. The laser driver circuit operated at up to 4.0 Gb/s.
Yoshio HARADA Yutaka HIRAKAWA Toyofumi TAKENAKA Nobuyoshi TERASHIMA
A conflict detection support method for combining additional telecommunication services with existing services is proposed. In this method, telecommunication services are described by the STR (State Transition Rule) method which specifies a set of state transition rules. Though conflict detection in the past depended on manual analysis by the designer, with this method, conflict candidates are mechanically narrowed down and indicated to the designer. All conflicts between five actual telecommunication service descriptions are detected in an experiment using a system developed in line with the proposed method.
Takeshi KAWAI Atsutaka KURIHARA Masakazu MORI Toshio GOTO Akira MIYAUCHI Takakiyo NAKAGAMI
The mode partition noise of 1.3µm distributed feedback laser diodes (DFB LD's), which is induced by the externally reflected light, is studied experimentally and numerically. The mode partition noise is evaluated by the k-value. It is observed that the mode parition noise monotonically increases with the DC bias current when the reflected light affects DFB LD's and the DC bias current is above the threshold current. From the dependence of the k-value on the external power reflection coefficient, it is observed that the k-value dramatically increases when the external power reflection coefficient is above a value which differs from LD to LD. This is closely related to the fact that the tolerance to the externally reflected light depends on the threshold gain difference between the main mode and the dominant side mode.
Shigekazu INOHARA Kazuhiko KATO Atsunobu NARITA Takashi MASUDA
The mechanisms for executing concurrent applications proposed so far fall into one of three groups: processes, kernel-level threads, and user-level threads. Each of them is insufficient in terms of either parallelism, the flexibility to combine separately developed programs at run-time, or costs of operations such as creation, switching, and termination. A thread facility in the XERO operating system overcomes this problem and provides a uniform framework for executing concurrent applications. To achieve parallelism of threads, the flexibility to combine separately developed programs at run-time, and fast thread operations, the operating system kernel and a thread management module in a user address space manage threads cooperatively. We implemented the cooperative thread management mechanism and measured its performance to examine the effectiveness of our approach.
It often occurs in the acoustic environment that a specific signal is contaminated by the additional noise of non-Gaussian distribution type. In order to extract exactly the various statistical information of only specific signal from the observed noisy data, a stochastic signal processing by use of digital computer is essential. In this study, a stochastic method for estimating the probability function of the specific signal embedded in the additional noise is first theoretically proposed in a suitable form for the quantized level observation. Then, the effectiveness of the proposed method is experimentally confirmed by applying it to the observed data in the acoustic environment.
Akira USAMI Takahisa NAKAI Hideki FUJIWARA Shun-ichiro ISHIGAMI Takao WADA
In this study, we evaluate the electrical characteristics of the SOI layer made by the wafer bonding method using a laser/microwave method. We use a He-Ne laser pulse for the photoconductivity modulation method and a semiconductor laser diode for the photoconductivity decay method as the carrier injection light source. The detected signal intensity at the void area decreases as compared with that at the center area of the SOI layer where there are no voids. The positions of the voids revealed by the proposed method are in good agreement with those by X-ray topography. We also measure the lifetime by the photoconductivity decay method using a laser diode. The lifetime at the void area is much shorter than that at the center area. It is considered that the decrease in the detected signal intensity at the void area is due to reduction in the minority carrier lifetime.
Kagetomo GENJI Kazumasa TAKAMI Toyofumi TAKENAKA
Telecommunication services are accomplished by cooperative networks of widely distributed communication processes and service users. Those specifications are often modeled by a set of possible message sequences among cooperating processes and users. The distributed and cooperative nature of telecommunication services results in a wide variety of message sequences and makes it more difficult for service designers to design such telecommunication services. To mitigate the difficulty, we propose a design support system with MSRs (message sequence rules) as design knowledge. The system supports the following two design activities: (1) specification of a typical message sequence that corresponds to a service behavior in a successful case, and (2) specification of incidentally possible message sequences that involve service behaviors in successful and unsuccessful cases. For the former activity, the system interacts with designers and identifies the messages they give with MSRs to understand the context of the message sequence and suggest possible subsequent messages. For the latter activity, the system applies MSRs to the typical message sequence and reasons possible messages from/to relevant processes and users under every state to suggest incidentally possible message sequences. Accordingly, designers may be relieved of investigating a wide variety of service behaviors in successful and unsuccessful cases. The system capability is based on MSRs equivalent to reusable message sequence components. MSRs can be obtained through abstraction of implementation-dependent messages and decomposition of those sequences into temporal relations among messages. The rule acquisition method provides MSRs with the potential to generate a wide variety of message sequences. In order to verify rule applicability, we have experimentally designed three kinds of services and conducted an experimental rule application to those specifications. The experimental evaluation results indicate that applicability is fairly high.
Hiroshi TOKUNAGA Yukuo KIRIHARA
The establishment of an intelligent network service operation architecture is important for facilitating development and integration of service operation systems. To do this, the basic concepts and goals of service operation items must first be clarified. Then, the necessary procedures as well as the required data on the behaviors of customers, operators and operation systems must be described. These various points are discussed based on an operation study methodology.
We investigate the relationship between two different notions of reducibility among prediction (learning) problems within the distribution-free learning model of Valiant (PAC learning model). The notions of reducibility we consider are the analogues for prediction problems of the many-one reducibility and of the Turing reducibility. The former is the notion of prediction preserving reducibility developed by Pitt and Warmuth, and its generalization. Concerning these two notions of reducibility, we show that there exist a pair of prediction problems A and B, whose membership problems are polynomial time solvable, such that A is reducible to B with respect to the Turing reducibility, but not with respect to the prediction preserving reducibility. We show this result by making use of the notion of a class of polynomially sparse variants of a concept representation class. We first show that any class A of polynomially sparse variants of another class B is reducible to B with respect to the Turing reducibility'. We then prove the existence of a prediction problem R and a class R of polynomially sparse variants of R, such that R does not reduce to R with respect to the prediction preserving reducibility.
Hideo IMANAKA Noriyuki IKEUCHI
This paper describes a method of evaluating operations effort for fiber optic subscriber loops, such as the Central Terminal/Remote Terminal (CT/RT) system, which can economically provide a variety of telecommunication services. Four system configurations with different operation procedures are evaluated by simulation. By evaluating the operating costs associated with service provisioning, it is shown that automatic distributing frames are cost effective in subscriber loops with CT/RT systems. Moreover, the most economical operation strategies for installing and extending subscriber boards are discussed in terms of facility and operations cost.
Yasutaka ICHIHASHI Yoshio NAGAKI Takeshi TSUKAMOTO Youichi TAMURA
A method for sweeping frequency ranges of over 130GHz within a tuning range of 30nm, without mode hopping, has been realized. The optical frequency is swept with a fine translation-rotation grating drive which uses a new, simplified operation method and a thermally controlled semiconductor laser system.
Ikko HARADA Fumio UENO Takahiro INOUE Ichirou OOTA
For a realization of a DC-DC converter using no magnetic devices, a new switched capacitor (SC) transformer is introduced, which gives voltage ratios by Fibonacci series corresponding to the stages. This transformer is connected in cascade by each basic block which is assembled by a capacitor and three MOSFET switches. This operates on a simple two-phase clock and has a large step-up or step-down voltage ratio in spite of its simple configuration. The characteristics of this transformer with n stages of basic block are derived and calculated by means of a 4 4 cascade matrix. The optimal arrangement of each stage's capacitances is shown to reduce the SC resistance by about 20%. The simulation results are compared with the characteristics of a prototype transformer with four stages (8 times step-up ratio). Its power efficiency achieves 88% in case of 97 V output voltage, 0.2 A output current, and 100 kHz switching frequency. Lastly, the proposed SC transformer is compared and discussed with other typical SC transformers.
Eisuke KUDOH Tadashi MATSUMOTO
User capacity of a DS/CDMA cellular mobile radio system employing transmitter power control (TPC) is investigated. Assuming log-normally distributed control error, outage probability is evaluated through computer simulations. The user capacity is dramatically decreased as the power control error increases. If the standard deviation is larger than about 2dB, the user capacity is decreased by more than 60%. It is shown that power control error with a standard deviation of less than or equal to 0.5dB is required to accommodate 90% of the maximum user capacity. The capacity decrease in the reverse and forward link channels due to non-uniform user distributions are also investigated. It is shown that if system users are densely distributed within the zone fringe whose thickness is 80% of the radius, the reverse link capacity is decreased by about 22%. The forward link capacity is comparatively insenstitive to non-uniform user distribution.
The outputs of all gates in a circuit are assumed to be observable unber the highly observable condition, which is mainly based on the use of E-beam testers. When using the E-beam tester, it is desirable that the test set for a circuit is small and the test vectors in the test set can be applied in a successive and repetitive manner. For a combinational circuit, these requirements can be satisfied by modifying the circuit into a k-UCP circuit, which needs only a small number of tests for diagnosis. For a sequential circuit, however, even if the combinational portion has been modified into a k-UCP circuit, it is impossible that the test vectors for the combinational portion can always be applied in a successive and repetitive manner because of the existence of feedback loops. To solve this problem, the concept of k-UCP scan circuits is proposed in this paper. It is shown that the test vectors for the combinational portion in a k-UCP scan circuit can be applied in a successive and repetitive manner through a specially constructed scan-path. An efficient method of modifying a sequential circuit into a k-UCP scan circuit is also presented.
Marshall FREIMER Ushio SUMITA Hsing K. CHENG
An organization may suffer large losses if its computer service is interrupted. For protection, it can purchase computer backup service from the outside market which temporarily provides service replacement from a central facility. A dynamic probabilistic model is developed which describes such a computer backup service system. The parties involved have conflicting motivations. The supplier is interested in optimizing his expected profits subject to a given set of parameters while the subscriber will evaluate the service contract to his own best interest. This paper analyzes how the economic interests of the supplier and subscribers interact based on a dynamic reliability analysis of their respective computer systems. Assuming all physical parameters fixed, the supplier's optimal value in terms of economic parameters is determined. An algorithmic procedure is developed for computing such values. Some numerical examples are presented in order to gain insights into the system.
A frame-installed lightwave synthesizer is constructed for optical frequency-division-multiplexing (FDM) communication. The synthesizer consists of two DFB diode lasers, electrical feedback loops, and an HCN gas cell used as a frequency reference at v0=192,843GHz (1.55459µm in wave-length). Output frequency can be stabilized at anywhere within v0(220) GHz. The beat note observed between the synthesizer and another HCN-stabilized DFB laser is constant within 2MHz over 100 hours. Frequency stability better than 410-10 (80kHz, without normalization) is obtained for an averaging time of 200s.
Akiyuki TAKEDA Takeshi KAWAI Masakazu MORI Toshio GOTO Akira MIYAUCHI
The effect of the externally reflected light on the mode partition characteristics of 1.3 µm Fabry-Perot laser diodes is studied experimentally and numerically. It is observed that the k-value increases monotonically with the DC bias current and the external reflection coefficient. Based on these experimental results, a numerical model to study the mode partition characteristics of laser diodes in the presence of external reflections is developed. The results calculated using this model agree well with the experimental ones. It is found that the mode partition noise is mainly caused by the interference between the light in the laser diode and the reflected light, and also by the fluctuations of the induced emission and absorption. In the time domain, their contribution to the mode partition noise is almost localized in the time region within 0.1nsec at the time when the optical pulse turns on.
Keisuke NAKANO Masaharu YOKONO Masakazu SENGOKU Yoshio YAMAGUCHI Shoji SHINODA Seiichi MOTOOKA Takeo ABE
In general, dynamic channel assignment has a better performance than fixed channel assignment in a cellular mobile communication system. However, it is complex to control the system and a lot of equipments are required in each cell when dynamic channel assignment is applied to a large service area. Therefore, it is effective to limit the size of the service area in order to correct the defects of dynamic channel assignment. So, we propose an application of dynamic channel assignment to a part of a service area when fixed channel assignment is applied to the remaining part of the area. In the system, the efficiency of channel usage in some cells sometimes becomes terribly low. The system has such a problem to be improved. We show that the rearrangement of the channel allocation is effective on the problem.