In this paper, the issue of carrier frequency offset (CFO) compensation in interleaved orthogonal frequency division multiple access (OFDMA) uplink system is investigated. To mitigate the effect of multiple access interference (MAI) caused by CFOs of different users, a new parallel interference cancellation (PIC) compensation algorithm is proposed. This scheme uses minimum mean square error (MMSE) criterion to obtain the estimation of interference users, then circular convolutions are employed to restore MAI and compensate CFO. To tackle the complexity problem of circular convolutions, an efficient MAI restoration and cancellation method is developed. Simulations illustrate the good performance and low computational complexity of the proposed algorithm.

While the problem of multicast routing and wavelength assignment (MC-RWA) in optical wavelength division multiplexing (WDM) networks has been investigated, relatively few researchers have considered network survivability for multicasting. This paper provides an optimization framework to solve the MC-RWA problem in a multi-fiber WDM network that can recover from a single-link failure with shared protection. Using the light-tree (LT) concept to support multicast sessions, we consider two protection strategies that try to reduce service disruptions after a link failure. The first strategy, called light-tree reconfiguration (LTR) protection, computes a new multicast LT for each session affected by the failure. The second strategy, called optical branch reconfiguration (OBR) protection, tries to restore a logical connection between two adjacent multicast members disconnected by the failure. To solve the MC-RWA problem optimally, we propose an integer linear programming (ILP) formulation that minimizes the total number of fibers required for both working and backup traffic. The ILP formulation takes into account joint routing of working and backup traffic, the wavelength continuity constraint, and the limited splitting degree of multicast-capable optical cross-connects (MC-OXCs). After showing some numerical results for optimal solutions, we propose heuristic algorithms that reduce the computational complexity and make the problem solvable for large networks. Numerical results suggest that the proposed heuristic yields efficient solutions compared to optimal solutions obtained from exact optimization.

External interferences can severely degrade the performance of an Over-the-horizon radar (OTHR), so suppression of external interferences in strong clutter environment is the prerequisite for the target detection. The traditional suppression solutions usually began with clutter suppression in either time or frequency domain, followed by the interference detection and suppression. Based on this traditional solution, this paper proposes a method characterized by joint clutter suppression and interference detection: by analyzing eigenvalues in a short-time moving window centered at different time position, clutter is suppressed by discarding the maximum three eigenvalues at every time position and meanwhile detection is achieved by analyzing the remained eigenvalues at different position. Then, restoration is achieved by forward-backward linear prediction using interference-free data surrounding the interference position. In the numeric computation, the eigenvalue decomposition (EVD) is replaced by singular values decomposition (SVD) based on the equivalence of these two processing. Data processing and experimental results show its efficiency of noise floor falling down about 10-20 dB.

We present an attractive approach for OFDM transmission using an adaptive pre-FFT equalizer, which can select ICI reduction mode according to channel condition, and a degenerated-inverse-matrix-based channel estimator (DIME), which uses a cyclic sinc-function matrix uniquely determined by transmitted subcarriers. In addition to simulation results, the proposed system with an adaptive pre-FFT equalizer and DIME has been laboratory tested by using a software defined radio (SDR)-based test bed. The simulation and experimental results demonstrated that the system at a rate of more than 100 Mbps can provide a bit error rate of less than 10-3 for a fast multi-path fading channel that has a moving velocity of more than 200 km/h with a delay spread of 1.9 µs (a maximum delay path of 7.3 µs) in the 5-GHz band.

In this study, we introduce shift-invariant sparse image representations using tree-structured dictionaries. Sparse coding is a generative signal model that approximates signals by the linear combinations of atoms in a dictionary. Since a sparsity penalty is introduced during signal approximation and dictionary learning, the dictionary represents the primal structures of the signals. Under the shift-invariance constraint, the dictionary comprises translated structuring elements (SEs). The computational cost and number of atoms in the dictionary increase along with the increasing number of SEs. In this paper, we propose an algorithm for shift-invariant sparse image representation, in which SEs are learnt with a tree-structured approach. By using a tree-structured dictionary, we can reduce the computational cost of the image decomposition to the logarithmic order of the number of SEs. We also present the results of our experiments on the SE learning and the use of our algorithm in image recovery applications.

The need for data encryption that protects sensitive data in a database has increased rapidly. However, encrypted data can no longer be efficiently queried because nearly all of the data should be decrypted. Several order-preserving encryption schemes that enable indexes to be built over encrypted data have been suggested to solve this problem. They allow any comparison operation to be directly applied to encrypted data. However, one of the main disadvantages of these schemes is that they expose sensitive data to inference attacks with order information, especially when the data are used together with unencrypted columns in the database. In this study, a new order-preserving encryption scheme that provides secure queries by hiding the order is introduced. Moreover, it provides efficient queries because any user who has the encryption key knows the order. The proposed scheme is designed to be efficient and secure in such an environment. Thus, it is possible to encrypt only sensitive data while leaving other data unencrypted. The encryption is not only robust against order exposure, but also shows high performance for any query over encrypted data. In addition, the proposed scheme provides strong updates without assumptions of the distribution of plaintext. This allows it to be integrated easily with the existing database system.

We carried out degradation analysis of a blue phosphorescent organic light emitting diode by both impedance spectroscopy and transient electroluminescence (EL) spectroscopy. The number of semicircles observed in the Cole-Cole plot of the modulus became three to two after the device was operated for 567 hours. Considering the effective layer thickness of the initial and degraded devices did not change by degradation and combining the analysis of the Bode-plot of the imaginary part of the modulus, the relaxation times of emission layer and hole-blocking with electron transport layers changed to nearly the same value by the increase of the resistance of emission layer. Decay time of transient EL of the initial device was coincident with that of the degraded one. These phenomena suggest that no phosphorescence quenching sites are generated in the degraded device, but the number of the emission sites decrease by degradation.

This paper proposes an architecture of an interference canceller for satellite communications with super-posed transmission, which is applicable not only to QPSK but also to 16QAM transmission to get higher satellite capacity. We implement it as an FPGA-based prototype and verify its performance. We propose here to use a new method to measure the satellite round-trip delay using an extended matched filter (EMF), which can work in low C/N conditions such as 0 dB and under. Given this performance, our canceller can work in a network in which forward and reverse links have the same power level. The results of the laboratory tests for QPSK show that interference can be suppressed by about 30 dB and that the BER degradation due to the canceller was small enough for operation.

This paper presents a prototype group modem for a hyper-multipoint data gathering satellite communication system. It can handle arbitrarily and dynamically assigned FDMA signals by employing a novel FFT-type block demultiplexer/multiplexer. We clarify its configuration and operational principle. Experiments show that the developed modem offers excellent performance.

In this paper, we investigate the smallest value of p for which a (J,L,p)-QC LDPC code with girth 6 exists for J=3 and J=4. For J=3, we determine the smallest value of p for any L. For J=4, we determine the smallest value of p for L ≤ 301. Furthermore we provide examples of specific constructions meeting these smallest values of p.

This paper presents the field uniformity characteristics in a triangular prism reverberation chamber that can be substituted for an open area test site or an anechoic chamber to measure electromagnetic interference. To improve size problems of a stirrer that is an official unit to generate a uniform field in the reverberation chamber, we suggest a diffuser of Quadratic Residue Sequence method. To validate the substitution of a diffuser for a stirrer, a diffuser is designed for 1-3 GHz, and three types of equilateral triangular prism reverberation chambers are modeled. Afterwards, the field distributions in these three reverberation chambers are both simulated and tested. Using XFDTD 6.2 of finite difference time domain method, field deviations of each structure are simulated and compared to each other. An evaluation of field uniformity is done by cumulative probability distribution which is specified in the IEC 61000-4-21. The result shows that the field uniformity in the chamber is within 6 dB tolerance and also within 3 dB standard deviation, which means a diffuser can satisfy the requirement of international standards.

The minimum initial marking problem of Petri nets (MIM) is defined as follows: "Given a Petri net and a firing count vector X, find an initial marking M0, with the minimum total token number, for which there is a sequence δ of transitions such that each transition t appears exactly X(t) times in δ, the first transition is enabled at M0 and the rest can be fired one by one subsequently." In a production system like factory automation, economical distribution of initial resources, from which a schedule of job-processings is executable, can be formulated as MIM. AAD is known to produce best solutions among existing algorithms. Although solutions by AMIM+ is worse than those by AAD, it is known that AMIM+ is very fast. This paper proposes new heuristic algorithms AADO and AMDLO, improved versions of existing algorithms AAD and AMIM+, respectively. Sharpness of solutions or short CPU time is the main target of AADO or AMDLO, respectively. It is shown, based on computing experiment, that the average total number of tokens in initial markings by AADO is about 5.15% less than that by AAD, and the average CPU time by AADO is about 17.3% of that by AAD. AMDLO produces solutions that are slightly worse than those by AAD, while they are about 10.4% better than those by AMIM+. Although CPU time of AMDLO is about 180 times that of AMIM+, it is still fast: average CPU time of AMDLO is about 2.33% of that of AAD. Generally it is observed that solutions get worse as the sizes of input instances increase, and this is the case with AAD and AMIM+. This undesirable tendency is greatly improved in AADO and AMDLO.

This paper presents a reconfigurable SAD Tree (RSADT) architecture based on adaptive sub-sampling algorithm for HDTV application. Firstly, to obtain the the feature of HDTV picture, pixel difference analysis is applied on each macroblock (MB). Three hardware friendly sub-sampling patterns are selected adaptively to release complexity of homogeneous MB and keep video quality for texture MB. Secondly, since two pipeline stages are inserted, the whole clock speed of RSADT structure is enhanced. Thirdly, to solve data reuse and hardware utilization problem of adaptive algorithm, the RSADT structure adopts pixel data organization in both memory and architecture level, which leads to full data reuse and hardware utilization. Additionally, a cross reuse structure is proposed to efficiently generate 16 pixel scaled configurable SAD (sum of absolute difference). Experimental results show that, our RSADT architecture can averagely save 61.71% processing cycles for integer motion estimation engine and accomplish twice or four times processing capability for homogeneous MBs. The maximum clock frequency of our design is 208 MHz under TSMC 0.18 µm technology in worst work conditions(1.62 V, 125C). Furthermore, the proposed algorithm and reconfigurable structure are favorable to power aware real-time encoding system.

This paper focuses on fusion estimation algorithms weighted by matrices and scalars, and relationship between them is considered. We present new algorithms that address the computation of matrix weights arising from multidimensional estimation problems. The first algorithm is based on the Cholesky factorization of a cross-covariance block-matrix. This algorithm is equivalent to the standard composite fusion estimation algorithm however it is low-complexity. The second fusion algorithm is based on an approximation scheme which uses special steady-state approximation for local cross-covariances. Such approximation is useful for computing matrix weights in real-time. Subsequent analysis of the proposed fusion algorithms is presented, in which examples demonstrate the low-computational complexity of the new fusion estimation algorithms.

Invariants of Petri nets are fundamental algebraic characteristics of Petri nets, and are used in various situations, such as checking (as necessity of) liveness, boundedness, periodicity and so on. Any given Petri net N has two kinds of invariants: a P-invariant is a |P|-dimensional vector Y with Yt A = and a T-invariant is a |T|-dimensional vector X with A X = for the place-transition incidence matrix A of N. T-invariants are nonnegative integer vectors, while this is not always the case with P-invariants. This paper deals only with nonnegative integer invariants (invariants that are nonnegative vectors) and shows results common to the two invariants. For simplicity of discussion, only P-invariants are treated. The Fourier-Motzkin method is well-known for computing all minimal support integer invariants. This method, however, has a critical deficiency such that, even if a given Perti net N has any invariant, it is likely that no invariants are obtained because of an overflow in storing intermediate vectors as candidates for invariants. The subject of the paper is to give an overview and results known to us for efficiently computing minimal-support nonnegative integer invariants of a given Petri net by means of the Fourier-Motzkin method. Also included are algorithms for efficiently extracting siphon-traps of a Petri net.

This paper quantitatively analyzes the maximum UDP (User Datagram Protocol) throughput for two-way flows in wireless string multi-hop networks. The validity of the analysis is shown by the comparison with the simulation and the experiment results. The authors also clarify the difference fundamental characteristics between a one-way flow and a two-way flow in detail based on the simulation results. The result shows that collisions at both ends' nodes are decisive in determining the throughput for two-way flows. The analyses are applicable to the estimation of VoIP (Voice over Internet Protocol) capacity for string multi-hop networks represented by WLAN (Wireless Local Area Network) mesh networks.

We have fabricated the transparent bottom gate and top gate TFTs using new oxide material of Al-Zn-Sn-O (AZTO) as an active layer. The AZTO active layer was deposited by RF magnetron sputtering at room temperature. Our novel TFT showed good TFT performance without post-annealing. The field effect mobility and the sub-threshold swing were improved by the post-annealing, and the mobility increased with SnO2 content. The AZTO TFT (about 4 mol% AlOx, 66 mol% ZnO, and 30 mol% SnO2) exhibited a mobility of 10.3 cm2/Vs, a turn-on voltage of 0.4 V, a sub-threshold swing of 0.6 V/dec, and an on/off ratio of 109. Though the bottom gate AZTO TFT showed good electrical performance, the bias stability was relatively poor. The bias stability was significantly improved in the top gate AZTO TFT. We have successfully fabricated the transparent AMOLED panel using the back-plane composed with top gate AZTO TFT array.

By using multiple repeated signal replicas to formulate the accumulative observed noisy signal sequence (AONSS) or the differential observed noisy signal sequence (DONSS) in the hybrid ARQ system, a novel data-aided maximum likelihood (DA ML) SNR estimation and a blind ML SNR estimation technique are proposed for the AWGN channel. It is revealed that the conventional DA ML estimate is a special case of the novel DA ML estimate, and both the proposed DA ML and the proposed blind ML SNR estimation techniques can offer satisfactory SNR estimation without introducing significant additional complexity to the existing hybrid ARQ scheme. Based on the AONSS, both the generalized deterministic and the random Cramer-Rao lower bounds (GCRLBs), which include the traditional Cramer-Rao lower bounds (CRLBs) as special cases, are also derived. Finally, the applicability of the proposed SNR estimation techniques based on the AONSS and the DONSS are validated through numerical analysis and simulation results.

Recently, many researchers tackle accurate object recognition algorithms and many algorithms are proposed. However, these algorithms have some problems caused by variety of real environments such as a direction change of the object or its shading change. The new tracking algorithm, Cascade Particle Filter, is proposed to fill such demands in real environments by constructing the object model while tracking the objects. We have been investigating to implement accurate object recognition on embedded systems in real-time. In order to apply the Cascade Particle Filter to embedded applications such as surveillance, automotives, and robotics, a hardware accelerator is indispensable because of limitations in power consumption. In this paper we propose a hardware implementation of the Discrete AdaBoost algorithm that is the most computationally intensive part of the Cascade Particle Filter. To implement the proposed hardware, we use PICO Express, a high level synthesis tool provided by Synfora, for rapid prototyping. Implementation result shows that the synthesized hardware has 1,132,038 transistors and the die area is 2,195 µm 1,985 µm under a 0.180 µm library. The simulation result shows that total processing time is about 8.2 milliseconds at 65 MHz operation frequency.

We investigate and propose the utilization of regenerative and non-regenerative relaying terminals in downlink cooperative MIMO communications, such as in base-station/router-relay-user transmission under different schemes. The source is equipped with multiple antennas, while the relays and destination are single-antenna terminals. From the source to the relays, symbols are transmitted using MIMO spatial-multiplexing technique. Depending on the type of relaying scheme, the relays either fully decode or amplify the received signal before retransmitting it to the destination using simple TDM transmission or Alamouti's space-time coding. We show that the proposed system realizes MIMO performance in single-antenna system environment, and performance-wise it is superior to existing transmission schemes, especially in low-SNR conditions. Furthermore, the proposed system is shown to give a diversity order of N-M+1, similar to that of MIMO V-BLAST system.