Network resiliency has become crucial as the failure of a group of networks happens more frequently, being caused by either natural disasters or malicious attacks. In order to enhance the resiliency of the Internet, we show that changing the evolving strategy is more important than increasing the number of links by multihoming, which connects a single network with two or more links. From the simulation with Internet topologies, it is shown that the resiliency of the Internet can be enhanced by replacing the current evolving strategy only in part.

A circuit technique to correct Vdd/PM distortion and improve efficiency as supply modulation of cascode class-E PAs has been proposed. The experimental result shows that the phase distortion can be improved from 20 degrees to 5 degrees. Moreover, a system co-simulation result demonstrated that the EVM can be improved from -17 dB to -19 dB.

This letter describes the importance of transition regions, e.g. at phoneme boundaries, for automatic speaker recognition compared with using steady-state regions. Experimental results of automatic speaker identification tasks confirm that transition regions include the most speaker distinctive features. A possible reason for obtaining such results is described in view of articulation, in particular, the degree of freedom of articulators. These results are expected to provide useful information in designing an efficient automatic speaker recognition system.

An analog circuit testing scheme is presented. The testing technique is a sinusoidal fault signature characterization, involving the measurement of DC offset, amplitude, frequency and phase shift, and the realization of two crossing level voltages. The testing system is an extension of the IEEE 1149.4 standard through the modification of an analog boundary module, affording functionalities for both on-chip testing capability, and accessibility to internal components for off-chip testing. A demonstrating circuit-under-test, a 4th-order Gm-C low-pass filter, and the proposed analog testing scheme are implemented in a physical level using 0.18-µm CMOS technology, and simulated using Hspice. Both catastrophic and parametric faults are potentially detectable at the minimum parameter variation of 0.5%. The fault coverage associated with CMOS transconductance operational amplifiers and capacitors are at 94.16% and 100%, respectively. This work offers the enhancement of standardizing test approach, which reduces the complexity of testing circuit and provides non-intrusive analog circuit testing.

We report Ultraviolet (UV)-induced visible light luminescence in artificial-lattice thin films of ion-doped silica glass (silica superstructure thin films). The film was composed of periodic nanometer layers of germanium-doped silica (Ge:SiO2), titanium-doped silica (Ti:SiO2), and tin-doped silica (Sn:SiO2). The thickness of each layer was between 10 and 30 nm. Despite the small thickness of the film (few microns), a relatively bright luminescence of white light was observed, along with cathode-ray luminescence in the superstructure film. In addition, irradiation of the superstructure film with UV light led to light amplification by stimulated emission at 405 nm. The experimental results suggest the potential application of silica superstructure thin films as optical amplifiers.

Low Power Design has become a significant requirement when the CMOS technology entered the nanometer era. Multiple-Supply Voltage (MSV) is a popular and effective method for both dynamic and static power reduction while maintaining performance. Level shifters may cause area and Interconnect Length Overhead (ILO), and should be considered at both floorplanning and post-floorplanning stages. In this paper, we propose a two phases algorithm framework, called VLSAF, to solve voltage and level shifter assignment problem. At floorplanning phase, we use a convex cost network flow algorithm to assign voltage and a minimum cost flow algorithm to handle level-shifter assignment. At post-floorplanning phase, a heuristic method is adopted to redistribute white spaces and calculate the positions and shapes of level shifters. The experimental results show VLSAF is effective.

In this paper, we propose an area-efficient design of Advanced Encryption Standard (AES) processor by applying a new common-expression-elimination (CSE) method to the sub-functions of various transformations required in AES. The proposed method reduces the area cost of realizing the sub-functions by extracting the common factors in the bit-level XOR/AND-based sum-of-product expressions of these sub-functions using a new CSE algorithm. Cell-based implementation results show that the AES processor with our proposed CSE method has significant area improvement compared with previous designs.

Carbon nanofibers (CNFs) were fabricated on graphite plates using "Ar+ ion sputtering method" in large amount at room temperature. The morphology of CNFs was controlled by a simultaneous carbon supply during ion sputtering. CNF-tipped cones were formed on graphite plate surfaces without carbon supply whereas those with a simultaneous carbon supply featured mainly needle-like protrusions of large size. The field electron emission (FE) properties, measured using parallel plate configurations in 10-4 Pa range, showed the threshold fields of 4.4 and 5.2 V/µm with a current density of 1 µA/cm2 for CNF-tipped cones and needle-like protrusion, respectively. Reliability test results indicated that CNF-tipped cones were more stable than needle-like protrusion. The morphological change after reliability test showed a so-called "self-regenerative" process and structure damage for CNF-tipped cones and needle-like protrusions, respectively.

We investigated the relationship between ambient illumination and psychological effect by applying a modified color harmony model. We verified the proposed model by analyzing correlation between psychological value and modified color harmony score. Experimental results showed the possibility to obtain the best color for illumination using this model.

We investigate per-flow flit and packet worst-case delay bounds in on-chip wormhole networks. Such investigation is essential in order to provide guarantees under worst-case conditions in cost-constrained systems, as required by many hard real-time embedded applications. We first propose analysis models for flow control, link and buffer sharing. Based on these analysis models, we obtain an open-ended service analysis model capturing the combined effect of flow control, link and buffer sharing. With the service analysis model, we compute equivalent service curves for individual flows, and then derive their flit and packet delay bounds. Our experimental results verify that our analytical bounds are correct and tight.

This paper studies reflection and transmission of a TE plane wave from a two-dimensional random slab with statistically anisotropic fluctuation by means of the stochastic functional approach. By starting with a representation of the random wavefield presented in the previous paper [IEICE Trans. Electron., vol.E92-C, no.1, pp.77-84, Jan. 2009], a solution algorithm of the multiple renormalized mass operator is newly shown even for anisotropic fluctuation. The multiple renormalized mass operator, the first-order incoherent scattering cross section and the optical theorem are numerically calculated and illustrated in figures. The relation between statistical properties and anisotropic fluctuation is discussed.

A novel bandpass filter (BPF) for an ultra-wideband (UWB) system is proposed in this letter. The BPF consists of four coplanar stripline (CPS)-to-microstrip transitions. Each transition is employed for broad electromagnetic (EM) coupling between a short-circuited CPS and an open-circuited microstrip line. The equivalent circuit model of the proposed geometry is derived and utilized in the impedance and mode matching analysis. Measured results show good agreement with the analysis and simulated ones.

Toponyms and other named entities are main issues in unknown word processing problem. Our purpose is to salvage unknown toponyms, not only for avoiding noises but also providing them information of area candidates to where they may belong. Most of previous toponym resolution methods were targeting disambiguation among area candidates, which is caused by the multiple existence of a toponym. These approaches were mostly based on gazetteers and contexts. When it comes to the documents which may contain toponyms worldwide, like newspaper articles, toponym resolution is not just an ambiguity resolution, but an area candidate selection from all the areas on Earth. Thus we propose an automatic toponym resolution method which enables to identify its area candidates based only on their surface statistics, in place of dictionary-lookup approaches. Our method combines two modules, area candidate reduction and area candidate examination which uses block-unit data, to obtain high accuracy without reducing recall rate. Our empirical result showed 85.54% precision rate, 91.92% recall rate and .89 F-measure value on average. This method is a flexible and robust approach for toponym resolution targeting unrestricted number of areas.

An inversion method of bridge height over water by polarimetric synthetic aperture radar (SAR) is developed. A geometric ray description to illustrate scattering mechanism of a bridge over water surface is identified by polarimetric image analysis. Using the mapping and projecting algorithm, a polarimetric SAR image of a bridge model is first simulated and shows that scattering from a bridge over water can be identified by three strip lines corresponding to single-, double-, and triple-order scattering, respectively. A set of polarimetric parameters based on the de-orientation theory is applied to analysis of three types scattering, and the thinning-clustering algorithm and Hough transform are then employed to locate the image positions of these strip lines. These lines are used to invert the bridge height. Fully polarimetric image data of airborne Pi-SAR at X-band are applied to inversion of the height and width of the Naruto Bridge in Japan. Based on the same principle, this approach is also applicable to spaceborne ALOSPALSAR single-polarization data of the Eastern Ocean Bridge in China. The results show good feasibility to realize the bridge height inversion.

In this paper, we use frequency-domain equalization (FDE) to create coherent optical single-carrier (CO-SC) transmission systems that are very tolerant of chromatic dispersion (CD) and polarization mode dispersion (PMD). The efficient transmission of a 25-Gb/s NRZ-QPSK signal by using the proposed FDE is demonstrated under severe CD and PMD conditions. We also discuss the principle of FDE and some techniques suitable for implementing CO-SC-FDE. The results show that a CO-SC-FDE system is very tolerant of CD and PMD and can achieve high transmission rates over single mode fiber without optical dispersion compensation.

A 2 to 5 GHz-band self frequency dividing quadrature mixer utilizing current re-use configuration with small size and broad band operation is proposed for a direct conversion receiver and a low-IF receiver of cognitive radio. The proposed mixer operates at twice the LO frequency by directly using a static type flip-flop frequency divider as the LO switching circuit for quadrature signal generation. The current re-use configuration is realized because the dc current of the frequency divider and the RF common-emitter amplifier share the same current flow path. Simulations and experiments verify that the proposed mixer offers broad band operation, miniaturization, and low power consumption. The mixer IC fabricated by 0.35 µm SiGe-BiCMOS technology achieved the conversion gain of 20.6 dB, noise figure of 11.9 dB and EVM for π/4-shift QPSK signal of 4.4% at 2.1 GHz with power consumption of 15 mW and size of 0.22 0.31 mm2. For the confirmation of broad band operation, the characteristics of conversion gain and noise figure were measured at 5.2 GHz. The proposed mixer could operate at 5.2 GHz with enough conversion gain, but the noise figure was inferior to that of 2.1 GHz. Therefore the further investigation and improvement about the noise figure will be needed for higher frequency.

Initial growth of GaP on Si substrates using metalorganic vapor phase epitaxy was studied. Si substrates were exposed to PH3 preflow for 15 s or 120 s at 830 after they were preheated at 925. Atomic force microscopy (AFM) revealed that the Si surface after preflow for 120 s was much rougher than that after preflow for 15 s. After 1.5 nm GaP deposition on the Si substrates at 830, GaP islands nucleated more uniformly on the Si substrate after preflow for 15 s than on the substrate after preflow for 120 s. After 3 nm GaP deposition, layer structures were observed on a fraction of Si surface after preflow for 15 s. Island-like structures remained on the Si surface after preflow for 120 s. After 6 nm GaP deposition, the continuity of GaP layers improved on both substrates. However, AFM shows pits that penetrated a Si substrate with preflow for 120 s. Transmission electron microscopy of a GaP layer on the Si substrate after preflow for 120 s revealed that V-shaped pits penetrated the Si substrate. The preflow for a long time roughened the Si surface, which facilitated the pit formation during GaP growth in addition to degrading the surface morphology of GaP at the initial growth stage. Even after 50 nm GaP deposition, pits with a density on the order of 107 cm-2 remained in the sample. A 50-nm-thick flat GaP surface without pits was achieved for the sample with PH3 preflow for 15 s. The PH3 short preflow is necessary to produce a flat GaP surface on a Si substrate.

Spectrum sensing is a key technology within Cognitive Radio (CR) systems. Cooperative spectrum sensing using a distributed model provides improved detection for the primary user, which opens the CR system to a new security threat. This threat is the decrease of the cooperative sensing performance due to the spectrum sensing data falsification which is generated from malicious users. Our proposed scheme, based on robust statistics, utilizes only available past sensing nodes' received power data for estimating the distribution parameters of the primary signal presence and absence hypotheses. These estimated parameters are used to perform the Dempster-Shafer theory of evidence data fusion which causes the elimination of malicious users. Furthermore, in order to enhance performance, a node's reliability weight is supplemented along with the data fusion scheme. Simulation results indicate that our proposed scheme can provide a powerful capability in eliminating malicious users as well as a high gain of data fusion under various cases of channel condition.

In deep-submicron technology, several state-of-the-art architectural synthesis flows have already adopted the distributed register architecture to cope with the increasing wire delay by allowing multicycle communication. In this article, we regard communication synthesis targeting a refined regular distributed register architecture, named RDR-GRS, as a problem of simultaneous data transfer routing and scheduling for global interconnect resource minimization. We also present an innovative algorithm with regard of both spatial and temporal perspectives. It features both a concentration-oriented path router gathering wire-sharable data transfers and a channel-based time scheduler resolving contentions for wires in a channel, which are in spatial and temporal domain, respectively. The experimental results show that the proposed algorithm can significantly outperform existing related works.

This paper reviews applications of fuzzy logic to telecommunications and proposes a novel fuzzy combining scheme for cooperative spectrum sensing in cognitive radio systems. A summary of previous applications of fuzzy logic to telecommunications is given outlining also potential applications of fuzzy logic in future cognitive radio systems. In complex and dynamic operational environments, future cognitive radio systems will need sophisticated decision making and environment awareness techniques that are capable of handling multidimensional, conflicting and usually non-predictable decision making problems where optimal solutions can not be necessarily found. The results indicate that fuzzy logic can be used in cooperative spectrum sensing to provide additional flexibility to existing combining methods.