This paper describes a new interface for a barge-in free spoken dialogue system combining an adaptive sound field control and a microphone array. In order to actualize robustness against the change of transfer functions due to the various interferences, the barge-in free spoken dialogue system which uses sound field control and a microphone array has been proposed by one of the authors. However, this method cannot follow the change of transfer functions because the method consists of fixed filters. To solve the problem, we introduce a new adaptive sound field control that follows the change of transfer functions.

This paper presents a technique for reducing spurious output of balanced modulators used in transmitters and arbitrary waveform generators. Two-step upconversion is a convenient way to produce a desired single-sideband (SSB) radio-frequency (RF) signal--baseband quadrature I and Q signals (which are analog outputs of direct digital frequency synthesizers) are upconverted by mixers and local oscillators (LOs)--but mismatches between the DACs in I and Q paths cause spurious output. We propose a method of dynamically matching the I and Q paths by multiplexing two DACs between I and Q paths in a pseudo-random manner. MATLAB simulation shows that multiplexing the two DACs spreads the spurious output, caused by mismatches between the two DACs, in the frequency domain, and reduces the peak level of spurious signals.

Continuous and explosive growth of the Internet has shown that current TCP mechanisms can obstruct efficient use of high-speed, long-delay networks. To address this problem we propose an enhanced transport-layer protocol called gHSTCP, based on HighSpeed TCP proposed by Sally Floyd. It uses two modes in the congestion avoidance phase based on the changing trend of RTT. Simulation results show gHSTCP can significantly improve performance in mixed environments, in terms of throughput and fairness against the traditional TCP Reno flows. However, the performance improvement is limited due to the nature of TailDrop router, and the RED/ARED routers can not alleviate the problem completely. Therefore, we present a modified version of Adaptive RED, called gARED, directed at the problem of simultaneous packet drops by multiple flows in high speed networks. gARED can eliminate weaknesses found in Adaptive RED by monitoring the trend in variation of the average queue length of the router buffer. Our approach, combining gARED and gHSTCP, is quite effective and fair to competing traffic than Adaptive RED with HighSpeed TCP.

A Spread Spectrum Clock Generator (SSCG) using Digital Tracking scheme (DT-SSCG) is described. Using digital tracking control outside a PLL, DT-SSCG can realize stable modulation characteristic independent of the PLL constants. Moreover, DT-SSCG can apply to various modulation profiles easily by brief change of the digital tracking parameters. A test chip has realized the fitting of 5000 ppm downspread with 6.02 dB and 8.02 dB spectrum peak reduction for triangle and Non-Linear modulation.

A systolic array is an ideal for ASICs because of its massive parallelism with a minimum communication overhead, regularity and modularity. Most of commercial FPGAs cannot handle systolic structure with fast sampling rate for their general-purpose architecture nature. This paper presents a new PLD architecture targeting a super-systolic array for application-specific arithmetic operations such as MAC. This architecture combines the high performance of ASICs with the flexibility of PLDs and it offers a significant alternative view on the programmable logic devices. The super-systolic array is ideal for a newly proposed PLD architecture when it comes to area-efficiency, P&R and clock speed.

The present paper describes a quality enhancement of band-limited speech signals. In regular telephone communication, the quality of the received speech signal is degraded by band limitation. We propose an effective but simple scheme for obtaining narrowband speech signals in which the frequency components are estimated from band limited signals. The proposed method utilizes aliasing components generated by wavelet reconstruction filters in the inverse discrete wavelet transform. The results of enhancement have been verified by applying this method to speech samples via telephone lines to obtain a noticeable improvement in speech quality.

A speaker identification system based on wavelet transform (WT) derived from codebook design using fuzzy c-mean algorithm (FCM) is proposed. We have combined FCM and the vector quantization (VQ) algorithm to avoid typical local minima for speaker data compression. Identification accuracies of 94% were achieved for 100 Mandarin speakers.

A 3-bit flash analog-to-digital converter (ADC) for electronic dispersion compensation (EDC) was developed using InP HBTs. Nyquist operation was confirmed up to 24 Gsps, which enables oversampling acquisition for 10 Gbit/s non-return-to-zero (NRZ) signals. The ADC can also be operated at up to 37 Gsps for low input frequencies. To reduce aperture jitter and achieve a wide band of over 7 GHz, an analog input signal for all pre-amplifiers and a clock signal for all latched comparators are provided as traveling waves through coplanar transmission lines. EDC was demonstrated by capturing a 10-Gbit/s pseudo-random bit stream (PRBS) with the waveform degraded by polarization-mode dispersion (PMD). By using the captured data, we confirmed that a calculation of a transversal filter mitigates PMD.

The recognition limit of luminance difference in the human visual system (HVS) has not been studied systematically. In this paper, surround adapted Weber-Fechner fraction is calculated based on the crispening effect. It is found that surround adapted fractions have reduced to 1/3 of the traditional Weber-Fechner fractions. As compared with Breitmeyer's experiments, the presented result is a reasonable one. It can be used as some guide to design the digital display system when a designer needs to decide bit count of digital signal in considering of the limit of brightness level, and as the inspection tool of display manufacturing of brightness smear, defect, and so on.

In order to control the moving speed of an endoscopic capsule in the human intestine, electrical stimulation method is proposed in this paper. The miniaturized endoscopic capsule with the function of various electrical stimulations has been designed and implemented. An in-vivo animal experiment has been performed to show the ability of controlling the movement speed of the endoscopic capsule according to the level of electrical stimulation. In-vivo experiments were performed by inserting the implemented capsule into a pig's intestinal tract. From the experimental results, the activation of peristaltic movement and the relationship between the moving speed of capsule and the stimulation amplitude could be found. It is shown that the moving speed of capsule in the intestine can be controlled by adjustment of the stimulation level applied in the capsule electrodes. The results of the in-vivo experiment verify that the degree of contraction in the intestinal tract is closely related with the level of stimulating electrical voltage, suggesting that the moving speed of capsule in the human gastrointestinal tract can be controlled by externally adjusting the amplitude of stimulating pulse signal.

Embedded systems are used in broad fields. They are one of the indispensable and fundamental technologies in a highly informative society in recent years. As embedded systems are large-scale and complicated, it is prosperous to design and develop a system LSI (Large Scale Integration). The structure of the system LSI has been increasing complexity every year. The degree of improvement of its design productivity has not caught up with the degree of its complexity by conventional methods or techniques. Hence, an idea for the design of a system LSI which has the flow of describing specifications of a system in UML (Unified Modeling Language) and then designing the system in a system level language has already proposed. It is important to establish how to convert from UML to a system level language in specification description or design with the idea. This paper proposes, extracts and verifies transformation rules from UML to SpecC which is one of system level languages. SpecC code has been generated actually from elements in diagrams in UML based on the rules. As an example to verify the rules, "headlights control system of a car" is adopted. SpecC code has been generated actually from elements in diagrams in UML based on the rules. It has been confirmed that the example is executed correctly in simulations. By using the transformation rules proposed in this paper, specification and implementation of a system can be connected seamlessly. Hence, it can improve the design productivity of a system LSI and the productivity of embedded systems.

It is not always possible to find a global parse for an input sentence owing to problems such as errors of a sentence, incompleteness of lexicon and grammar. Partial parsing is an alternative approach to respond to these problems. Partial parsing techniques try to recover syntactic information efficiently and reliably by sacrificing completeness and depth of analysis. One of the difficulties in partial parsing is how the grammar might be automatically extracted. In this paper we present a method of automatically extracting partial parsing rules from a tree-annotated corpus using the decision tree method. Our goal is deterministic global parsing using partial parsing rules, in other words, to extract partial parsing rules with higher accuracy and broader expansion. First, we define a rule template that enables to learn a subtree for a given substring, so that the resultant rules can be more specific and stricter to apply. Second, rule candidates extracted from a training corpus are enriched with contextual and lexical information using the decision tree method and verified through cross-validation. Last, we underspecify non-deterministic rules by merging substructures with ambiguity in those rules. The learned grammar is similar to phrase structure grammar with contextual and lexical information, but allows building structures of depth one or more. Thanks to automatic learning, the partial parsing rules can be consistent and domain-independent. Partial parsing with this grammar processes an input sentence deterministically using longest-match heuristics, and recursively applies rules to an input sentence. The experiments showed that the partial parser using automatically extracted rules is not only accurate and efficient but also achieves reasonable coverage for Korean.

For three-step cell search in WCDMA, a stepwise serial scheme is conventionally employed, where each step of cell search operates in serial. In order to reduce the cell search time, a stepwise parallel scheme can be considered as a candidate for cell search, where each step operates in pipelined fashion. However, in the parallel scheme where the processing time in every step is equal, excessive accumulations are caused in step (1) and step (3) because the period of a code used for step (2) is much longer than that for the other steps. And it does not provide any gain because the effect becomes easily saturated with the number of accumulations. In this paper, the performance of parallel cell search is analyzed, and compared with that of serial cell search. Finally, it is shown that the performance of parallel cell search can be improved by adjusting the processing time in each step, based on the analytic results.

Photonic crystal fiber (PCF) is a promising candidate for future transmission media due to its unobtainable features in a conventional single-mode fiber. We discuss some important problems to realize a PCF for transmission purpose. We also present recent progress on the PCF as a transmission media.

We design and demonstrate a high repetition-rate similariton generation system using normal dispersion fiber amplifiers (NDFA's). We numerically calculate the pulse evolution in NDFA's and clarify the condition to generate similariton pulses in a finite-length NDFA. Then we design the similariton generation system in consideration of the use of Erbium-doped fibers (EDF's) and show that a km-long fiber amplifier with low normal dispersion can generate a high repetition-rate similariton train from practical pico-second pulse sources. In the experiment, we demonstrate a 10-GHz similariton source using a 1.2-km-long EDF. For application to multi-wavelength light sources, we measure the bit-error rate of the spectrally sliced similariton, and show that it exhibits low-noise performance, which is attributed to the spectral flatness.

This paper describes a high-speed D/A converter design for mixed-mode systems. Capacitive coupling induced by inter-chip interconnects and time-variant clock skew between ICs should be considered for mixed-mode systems, and on-chip interconnects should be treated as transmission lines in the circuit simulation as operating speed reaches GHz range. A robust FIFO built in the D/A converter can absorb input data timing variance due to the capacitive coupling and the clock timing skew, the worst-case margin of which is 1.5TCLK. Distributed RLC transmission line models for on-chip interconnects produce accurate simulation results at 1 GHz clock frequency over lumped models. For optimized D/A converter design, behavioral modeling methodology is also presented in this paper. Measurement results verify the accuracy of the on-chip interconnect and behavioral models.

This paper reports on the bending loss insensitive single mode fiber suitable for access networks, which is applicable for wide wavelength use. Excellent attenuation stability of the fiber in the full spectrum range has been confirmed even in severe conditions such as fiber handling in mid-span access at aerial closure, cable installation/handling in indoor wirings and so on. Also, applications suitable for FTTH subscribers' use have been introduced.

In this paper, the previously introduced periodic Fourier transform concept is extended to a two-dimensional case. The relations between the periodic Fourier transform, harmonic series representation and Fourier integral representation are also discussed. As a simple application of the periodic Fourier transform, the scattering of a scalar wave from a finite periodic surface with weight is studied. It is shown that the scattered wave may have an extended Floquet form, which is physically considered as the sum of diffraction beams. By the small perturbation method, the first order solution is given explicitly and the scattering cross section is calculated.

In this paper, firstly, effects of third order dispersion (TOD) on coupled pulses are analyzed. Then, averaging method is modified and proved to be an effective way for obtaining non-radiative bi-soliton solution of the TOD perturbed nonlinear Schrodinger equation (NLSE), which models a dispersion managed (DM) optical transmission system. Finally, the obtained bi-soliton evolution behavior is studied, and compared with that of uni-soliton. With the increase of average TOD, pulse velocity of bi-soliton largely deviates from that of uni-soliton. Thus, even though TOD cannot be exactly vanished in fabrication, it is suggested to compensate average TOD as low as possible.

In this paper, we focus on the problem that in an ad hoc network, how to send a message securely between two users using the certificate dispersal system. In this system, special data called certificate is issued between two users and these issued certificates are stored among the network. Our final purpose on this certificate dispersal problem is to construct certificate graphs with lower dispersability cost which indicates the average number of certificates stored in each node in an ad hoc network. As our first step, when a certificate graph is given, we construct two efficient certificate dispersal algorithms for strongly connected graphs and directed graphs in this paper. We can show that for a strongly connected graph G =(V, E) and a directed graph H =(V ′, E ′), new upper bounds on dispersability cost on the average number of certificates stored in one node are O(DG +|E|/|V|) and O(pG dmax +|E ′|/|V ′|) respectively, where DG is the diameter of G, dmax is the maximum diameter of strongly connected components of H and pG is the number of strongly connected components of H. Furthermore, we give some new lower bounds for the problem and we also show that our algorithms are optimal for several graph classes.