This paper considers the estimation of speech parameters and their enhancement using an approach based on the estimation-maximization (EM) algorithm, when only noisy speech data is available. The distribution of the excitation source for the speech signal is assumed as a mixture of two Gaussian probability distribution functions with differing variances. This mixture assumption is experimentally valid for removing the residual excitation signal. The assumption also is found to be effective in enhancing noise-corrupted speech. We adaptively estimate the speech parameters and analyze the characteristics of its excitation source in a sequential manner. In the maximum likelihood estimation scheme we utilize the EM algorithm, and employ a detection and an estimation step for the parameters. For speech enhancement we use Kalman filtering for the parameters obtained from the above estimation procedure. The estimation and maximization procedures are closely coupled. Simulation results using synthetic and real speech vindicate the improved performance of our algorithm in noisy situations, with an increase of about 3 dB in terms of output SNR compared to conventional Gaussian assumption. The proposed algorithm also may be noteworthy in that it needs no voiced/unvoiced decision logic, due to the use of the residual approach.

It is an important problem in fields of radar, sonar, and so on to estimate parameters of closely spaced multiple signals. The MUSIC algorithm with the forward-backward (FB) spatial smoothing is considered as the most effective technique at present for the problem with coherent signals in a variety of fields. We have applied this in Laser Microvision. Recently, Shimotahira has proposed the Kernel MUSIC algorithm, which is applicable to cases when signal vectors and noise vectors are orthogonal. It also utilizes Gaussian elimination of the covariance matrix instead of eigenvalue analysis to estimate noise vectors. Although the amount of computation by the Kernel MUSIC algorithm became lighter than that of the conventional MUSIC algorithm, the covariance matrix was formed to estimate noise vectors and also all noise vectors were used to analyze the MUSIC eigenspectrum. The heaviest amount of computation in the Kernel MUSIC algorithm exists in the transformation of the covariance matrix and the analysis of the MUSIC eigenspectrum. We propose a more straightforward algorithm to estimate noise vectors without forming a covariance matrix, easier algorithm to analyze the MUSIC eigenspectrum. The superior characteristics will be demonstrated by results of numerical simulation.

The effect of silicone vapour concentration on the contact failure was examined by using micro relays and motor brush-slip ring(commutator) contacts, [(CH3) 2SiO]4: D4 was used as a vapour source of silicone contamination. Because the influence of the vapour of the silicone on the contact surface can not be avoided at all times due to its gradual evaporation in the atmosphere. The contact failure caused by the silicone vapour was confirmed as formation of SiO2 on the contact surfaceby analysis of EPMA and XPS. A minimum limiting concentration level which does not affect contact reliability was found. This limiting level was 10 ppm(O.13mg/l). Validity of the limiting level was confirmed by the relationships among concentration, temperature, SiO2 film thickness and contact resistance. Furthermore, the effect of the degree of silicone polymerization on the limiting concentration was derived by an empirical formula. This silicone is found to have polymerization degree larger than D7: n=7. These results were confirmed by the contact failure data due to the silicone contamination.

This paper proposes a new duplication redundancy technology, 2 Transistors for 1.5 Gates, that is capable of automatic defect tolerance, so making large, high-resolution, color TFT-LCD panel fabrication both easy and economical. This redundancy technology with automatic defect tolerant capability has a low hardware overhead and is very capable of compensating for open circuit defects in a large active-matrix panel. This technology was confirmed by fabricating a 9.5-inch color TFT-LCD panel with 640480 pixels(960960 dots). This panel showed excellent display performance and produced pictures without defects. The yield improvement effect of this technology was also confirmed by calculation based on the Boltzmann statistics model. Consequently, this technology is clearly seen to have a yield improvement effect equal to defect density reduction of about one order, compared to non redundancy. This technology drastically reduces dot and line defects, enabling fabrication of large, high-resolution, color TFT-LCD panels at a relatively low cost.

The characteristics of a-Si bottom-gate TFT test devices with several kinds of inorganic "quasi-black matrix," such as metal, semiconductor, and insulator, on the top were investigated for various black matrix(BM) resistivities. In the Ia-Vg characteristics, for a BM sheet resistance of about1 1012 Ω/, a high off current and large Vth shift were observed due to the back-gating effects when the BM is charged up. Accrding to the ac dynamic characteristics, there was almost no leakage due to the capacitive coupling between source and drain after 16.6 msec(one frame) when the BM sheet resistance was above 7 1013 Ω/ . It was found that hydrogenated amorphous silicon germanium(a-SiGe:H) film, which has enough optical density, with the sheet resistance above the order of 1014 Ω/ is a promising candidate for an inorganic BM on TFT array.

This paper describes the effects of operating temperature on delay time in a 1-V multi-threshold CMOS(MTCMOS) circuit, Delay-time analysis including the temperature factor shows that the delay-time variation of the CMOS circuit becomes amall for low-voltage operation and the variation is mainly determined by the threshold voltage and its variation-rate with temperature. As a design method of a MTCMOS circuit with both high-threshold and low-threshold MOSFETs, optimization of the low-threshold voltage at which the delay-time of the circuit is independent of operating temperature is described in detail. The validity of the design method is confirmed by the evaluation of a gate-chain TEG and a 1-V 12 K-gate digital-filter LSI fabricated with o.5-µm MTCMOS technology.

Super twisted nematic (STN) liquid crystal displays(LCDs) using spiral polymer aligned nematic (SPAN) liquid crystals have been achieved by photo-polymerization of some kinds of chiral monoacrylates in liquid crystalline hosts.The spiral polymer made of a chiral monoacrylate in STN LCD has effect to reduce the driving voltage without any disadvantages for the STN LCD. The relation of chemical structure of a chiral monoacrylate and nature of spiral polymer is discussed.

For the multi-gray shades image in the passive matrix type STN-LCDs, the method which combined space modulated patterns and frame rate control(FRC)with switched some frames has been used. Although bi-level display elements are used this method makes it possible to display a multi-gray shades image without resolution-loss for still-image, while the method has a fault to perceive interference of flicker at low frame rate, as is wellknown. However the measured quantitative data for flicker and frame frequency have hardly be published. With regard to frame rate control method which some typical space modulated patterns are combined, we measure critical flicker frame frequency(CFFF) with subjective experiments. This paper also discribes that the data are arranged to be shown in form of relationship with the screen luminance and the lowest frequency components included among ripples on times and also the ripples ratio. Our experimental study provides useful data for designing such kinds of display.

The transform coding scheme is often used for data compression of images, but the blocking effects peculiar to the scheme appear more clearly in reproduced images as a coding rate (bits/pixel) decreases. These effects can sometimes be viewed as a periodical square-grid overlaying the images. In this paper,we propose a new method for selectively measuring the above blocking effects among several types of image degradation by means of the techniques of nonlinear signal processing for spectral infomation (cepstral techniques), in order to compare the amount of blocking effects for the different coding images. First a two-component model which consists of DC and AC images, is discussed from a viewpoint of subimage-by-subimage coding, and some basic properties of cepstral information for the model are investigated. Then we show a procedure to compute the cepstral information for two-dimensional image signals taking the horizontal and vertical directions ioto account, and introduce a cepstral mean square error (CMSE) as a new measure to estimate the amount of blocking effects. The computer simulation results for some test images using different coding schemes show that the amount of blocking effects in each image can be easily measured and estimated by this method even when the blocking effects appear slightly.

We develop a simulation environment for designing and examining a neural network model at the network level. The aim of our research is to enable researchers investigating neural network connective models to save time by being equipped with a graphical user interface and database of the network models. This environment consists of three parts: (1) the kernel of the simulation system, (2) NNDBMS (Neural Networks DataBase Management System), and (3) a system for displaying simulation results in various ways.

Stable phase locked states" are found amongst the equiliblia of the phasor model known as a generalized Hopfield model having complex-valued local states on the unit circle with centre at the origin. The asynchronous updating rule is assumed, and the energy decreasing characteristic is used to investigate a property of the equilibrium states. Some of the equilibria are shown to be fragile" in the sense that the energy is not locally convex. It is also shown that the local convexity of the energy is assured by a sort of consistency between the equilibrium and the connection weights.

In this paper, we present a distributed RAID style video server that addresses the problem of increasing video stream supplying capability in VOD systems. Distibuted RAID Stylemeans extending the RAID method usually applied to disks to the servers, so as to achieve improvements in performance and reliability. The great advantage of this architecture is that the linear performance improvement can be achieved by adding inexpensive servers of a diffusion model. We have implemented the RAID0 style and RAID4 style systems. A number of new features such as the array configuration method or the striping buffer are applied to them. A precise performance evaluation was made in a near practical environment, with more than 40 video streams. We tested the system, in both normal and degraded mode (server failure) and by checking frame drop rates as well as observing picture quality. An evaluation by simulation was also conducted. The results of the above evaluations agreed well with the calculation value, to confirm the feasibility of this architecture.

In retrieving information from databases widely distributed in a network, the first thing to do is to search and find the database where the required information is stored. We call this the information searches rather than the retrievals. In this paper, we present a search and retrieval method for multimedia information, especially images. First, we formalize the general elements of information search and introduce a new search concept based on entropy reduction. Next, we discuss recent new technologies for image retrieval and introduce a new image retrieval system called VideoReality. Third, we present several methods of searching in the network- for example, the Internet robot TITAN, and a new search method for images distributed in the network that is based on the hierarchical structure of image retrieval. Finally, we discuss the network control and design concepts appropriate for information search and retrival.

In this paper, we point out an architecture optimization problem for networks delivering services such as Video-On-Demand or, more precisely, two intertwined problems, i.e., the storage allocation of the videos among the storage nodes of the network and the choice of the network topology. We present and investigate the properties of a genetic algorithm which can handle such problems. This algorithm, as well as a greedy heuristics and simulated annealing, are then used to derive solutions in function of link and node cost parameters in a 36-node network. The results show that genetic algorithms are an effective class of algorithms for such problems, and possibly many other topology optimization problems.

The up and coming multimedia services are based on real-time high-speed networks. For efficient operation of such services, real-time and precise network management is essential. In this paper, we show that presently available MIB designs are severely inadequate to support real-time network management. We point out and analyze the management constraints and bottlenecks. The concept of quality of management of management information is introduced and its importance in practical network management is discussed. We have proposed a new MIB architecture that will raise the quality of management information to meet the requirements of managing high-speed networks and multimedia services. Experimental results from a prototype implementation of the new MIB architecture are presented.

This paper provides an architectural study of optical ring trunk-transmission networks using either Time Division Multiplexing (TDM) or Wavelength Division Multiplexing (WDM). A timeslot arrangement algorithm for distributed controlled TDM rings is proposed that minimizes the number of slots (wavelengths) required in bi-directional ring networks. This algorithm is applied in a straightforward manner to wavelength arrangement in WDM ring networks. The technique, characterized by timeslot (or wavelength) conversion, realizes common add/drop procedures in all Add/Drop Multiplexers (ADMs) when they are connected logically in a mesh topology. A self-healing algorithm is also proposed for network restoration. It offers good performance in terms of protection line-capacity, restoration delay, and survivability against multiple failures.

A multicast ATM switch with a new external copy module is proposed. The copy module, called copy-trunk, has two new functions to guarantee the QoS of P-MP cells: The delay priority control function and the output-cell-spacing control function. By using the delay priority control function, copied cells with high-priority are always released earlier than those with low-priority so as to avoid increasing the delay time of real-time traffic. The output-cell-spacing control function is used to reduce the burstiness of the output traffic. The output pattern is adaptively controlled by measuring the input load. The effects of these two controls are quantitatively described. The copy-trunk allows the multicast capability of a switch to be efficiently and economically increased to satisfy future traffic volume and services.

Internet is evolving to be an integrated service platform for promising future global information infrastructure. New multimedia services, e.g., Video-on-Demand, are expected to be provided on this platform, in conjuction with the existing rich information exchange and sharing services on Internet, such as E-mail, WWW. The paper proposes a service system architecture for Video-on -Demand on Internet, named MINS (Multimedia Internet Navigation System), which is capable of both realtime audio/video transmission and realtime and VCR like plya-out. MINS is composed of 1) servers maintaining both audio/video program lists and contents, and 2) clients retrieving the programs and play-out them. The paper focuses on the communication architecture in MINS, e.g., flow control, realtime media synchronization control, and audio/video session control. The performance of the prototype MINS is also evaluated in the paper.

We proposed a graphical user interface (GUI) that provides users with multimedia information, including dynamic images. On the Internet, there are many WWW browsers that read the Hypertext Markup Language (HTML). As various browsers extend the HTML tags and attributes independently to expand and/or improve layout, the HTML compatibility between browsers is lost. We have developed a WWW browser to solve this problem. Our browser presents all multimedia information, including text, images, and dynamic images as a block and renders them without the need to extend the HTML specifications. It independently interprets and draws HTML objects using a layout manager. It has a layout rule, and manages the hierarchical data structure and the block data of HTML documents. This browser also allows layout-rule changes. The layout manager efficiently displays information while checking the available display area size. The structure of this browser is such that the portion that manages the formatting of the document is separated from the portion that displays the individual parts. In this browser, the layout rule allows text to be placed around an image without the need to modify the existing HTML contents. It is also relatively easy to change the presentation of multiple screens, such as a two-page book-like layout or the conventional single-page scroll-bar format by changing the layout rule. The incorporation of media decoders into the browser enables the displaying of various multimedia information, such as sounds, pictures, and moving images.

The objective of this paper is to find a parametric representation for the vocal-tract log-area function that is directly and simply related to basic acoustic characteristics of the human vocal-tract. The importance of this representation is associated with the solution of the articulatory-to-acoustic inverse problem, where a simple mapping from the articulatory space onto the acoustic space can be very useful. The method is as follows: Firstly, given a corpus of log-area functions, a parametric model is derived following a factor analysis technique. After that, the articulatory space, defined by the parametric model, is filled with approximately uniformly distributed points, and the corresponding first three formant frequencies are calculated. These formants define an acoustic space onto which the articulatory space maps. In the next step, an independent component analysis technique is used to determine acoustic and articulatory coordinate systems whose components are as independent as possible. Finally, using singular value decomposition, acoustic and articulatory coordinate systems are rotated so that each of the first three components of the articulatory space has major influence on one, and only one, component of the acoustic space. An example showing how the proposed model can be applied to the solution of the articulatory-to-acoustic inverse problem is given at the end of the paper.