InGaP/GaAs HBT with novel ledge coupled capacitor (LCC) structure has been proposed and demonstrated for the first time. The LCC employs an extrinsic InGaP ledge layer as a capacitor parallel to the base resistor. This configuration enables feeding RF signals directly into the base without passing them through the base resistor. With the fabricated HBT, no increase of leakage current between emitter and base electrode was observed. The maximum oscillation frequency (fmax) of the HBT was improved by 10 GHz as compared with an HBT without the LCC.

A novel method of extraction of emitter, Re, and base, Rb, resistances of bipolar junction transistors, BJTs, is proposed. Re and Rb are obtained from static characteristics and noise power spectral density of low frequency, 1/f, fluctuations, measured in the base and collector currents of the devices. Measurements carried out on quasi self-aligned silicon BJTs show that Re and Rb values obtained by the proposed method scale correctly with transistor dimensions and match the values estimated from the device layout.

A simplified distribution base resistance model (SDM) is proposed to identify each component of the base resistance and determine the dominant. This model divides the parasitic base resistance into one straight path and two surrounding paths. It is clarified that the link base resistance is dominant in a short emitter and the surrounding polysilicon base electrode resistance is dominant in a long emitter. In the SDM, the distance of the link base is reduced to half; with metal silicide as the extrinsic base electrode, the base resistance will be reduced to 75%.

A convenient method for determining emitter and base resistances from small signal measurements has been developed. This method is based on Neugroschel's method, but the frequency has been varied instead of varying β0. It is demonstrated that the base resistance was successfully extracted. The extracted emitter resistance depended on the collector current because of the difference between the exact gm value and the approximated one, IC/VT. It has also been shown that the proposed method is more robust than the conventional impedance-circle method even when cross-talk occurs.