Orthogonal frequency division multiplexing (OFDM) is very sensitive to the carrier frequency offset (CFO). The CFO estimation precision heavily makes impacts on the OFDM performance. In this paper, a new Bayesian learning-assisted joint CFO tracking and channel impulse response estimation is proposed. The proposed algorithm is modified from a Bayesian learning-assisted estimation (BLAE) algorithm in the literature. The BLAE is expectation-maximization (EM)-based and displays the estimator mean square error (MSE) lower than the Cramer-Rao bound (CRB) when the CFO value is near zero. However, its MSE value may increase quickly as the CFO value goes away from zero. Hence, the CFO estimator of the BLAE is replaced to solve the problem. Originally, the design criterion of the single-time-sample (STS) CFO estimator in the literature is maximum likelihood (ML)-based. Its MSE performance can reach the CRB. Also, its CFO estimation range can reach the widest range required for a CFO tracking estimator. For a CFO normalized by the sub-carrier spacing, the widest tracking range required is from -0.5 to +0.5. Here, we apply the STS CFO estimator design method to the EM-based Bayesian learning framework. The resultant Bayesian learning-assisted STS algorithm displays the MSE performance lower than the CRB, and its CFO estimation range is between ±0.5. With such a Bayesian learning design criterion, the additional channel noise power and power delay profile must be estimated, as compared with the ML-based design criterion. With the additional channel statistical information, the derived algorithm presents the MSE performance better than the CRB. Two frequency-selective channels are adopted for computer simulations. One has fixed tap weights, and the other is Rayleigh fading. Comparisons with the most related algorithms are also been provided.

In mobile communication systems, the channel state information (CSI) is severely affected by the noise effect of the receiver. The adaptive subcarrier grouping (ASG) for sample matrix inversion (SMI) based minimum mean square error (MMSE) adaptive array has been previously proposed. Although it can reduce the additive noise effect by increasing samples to derive the array weight for co-channel interference suppression, it needs to know the signal-to-noise ratio (SNR) in advance to set the threshold for subcarrier grouping. This paper newly proposes adaptive zero padding (AZP) in the time domain to improve the weight accuracy of the SMI matrix. This method does not need to estimate the SNR in advance, and even if the threshold is always constant, it can adaptively identify the position of zero-padding to eliminate the noise interference of the received signal. Simulation results reveal that the proposed method can achieve superior bit error rate (BER) performance under various Rician K factors.

This paper proposes a novel random access identifier (RAID)-linked receiver beamforming method for time division duplex (TDD)-based random access. When the number of receiver antennas at the base station is large in a massive multiple-input multiple-output (MIMO) scenario, the channel estimation accuracy per receiver antenna at the base station receiver is degraded due to the limited received signal power per antenna from the user terminal. This results in degradation in the receiver beamforming (BF) or antenna diversity combining and active RAID detection. The purpose of the proposed method is to achieve accurate active RAID detection and channel estimation with a reasonable level of computational complexity at the base station receiver. In the proposed method, a unique receiver BF vector applied at the base station is linked to each of the M RAIDs prepared by the system. The user terminal selects an appropriate pair comprising a receiver BF vector and a RAID in advance based on the channel estimation results in the downlink assuming channel reciprocity in a TDD system. Therefore, per-receiver antenna channel estimation for receiver BF is not necessary in the proposed method. Furthermore, in order to utilize fully the knowledge of the channel at the user transmitter, we propose applying transmitter filtering (TF) to the proposed method for effective channel shortening in order to increase the orthogonal preambles for active RAID detection and channel estimation prepared for each RAID. Computer simulation results show that the proposed method greatly improves the accuracy of active RAID detection and channel estimation. This results in lower error rates than that for the conventional method performing channel estimation at each antenna in a massive MIMO environment.

This work investigates the effect of channel estimation error on the average secrecy outage capacity of dual selection in the presence of multiple eavesdroppers. The dual selection selects a transmit antenna of Alice and Bob (i.e., user terminal) which provide the best received signal to noise ratio (SNR) using channel state information from every user terminals. Using Gaussian approximation, this paper obtains the tight analytical expression of the dual selection for the average secrecy outage capacity over channel estimation error and multiple eavesdroppers. Using asymptotic analysis, this work quantifies the high SNR power offset and the high SNR slope for the average secrecy outage capacity at high SNR.

This paper proposes a low-complexity variational Bayesian inference (VBI)-based method for massive multiple-input multiple-output (MIMO) downlink channel estimation. The temporal correlation at the mobile user side is jointly exploited to enhance the channel estimation performance. The key to the success of the proposed method is the column-independent factorization imposed in the VBI framework. Since we separate the Bayesian inference for each column vector of signal-of-interest, the computational complexity of the proposed method is significantly reduced. Moreover, the temporal correlation is automatically uncoupled to facilitate the updating rule derivation for the temporal correlation itself. Simulation results illustrate the substantial performance improvement achieved by the proposed method.

High reliability is required, even in Internet of things (IoT) communications, which are sometimes used for crucial control such as automatic driving devices. Hence, both the uplink (UL) and downlink (DL) communication quality must be improved in the physical layer. In this study, we focus on the communication quality of broadcast DL, which is configured using orthogonal frequency-division multiplexing (OFDM) as a multiplexing scheme and turbo code as forward error correction (FEC). To reduce the frame-error rate (FER) in the DL, we consider two transmit-diversity (TD) techniques that use space-time block code (STBC) or cyclic-delay diversity (CDD). The purpose of this paper is to evaluate the TD performance and to enhance FER performance of CDD up to that of STBC. To achieve this goal, a channel estimation method is proposed to improve FER for CDD. For this purpose, we first evaluate the FER performance of STBC and CDD by performing computer simulations and conducting hardware tests using a fading emulator. Then, we conduct field experiments in the 2.5GHz band. From the results of these evaluations, we confirm that STBC and CDD improved FER compared with single antenna transmission. CDD with the proposed channel estimation method achieved almost the same performance as STBC by accurately estimating the channel frequency response (CFR) and appropriately adjusting the amount of cyclic shift (ACS). When moving a received device around Yokosuka Research Park, STBC and CDD, using spatial diversity with omni antennas for TD, improved the FER from 3.84×10-2 to 1.42×10-2 and 1.19×10-2, respectively.

In the user identification (UI) scheme for a multiple-access fading channel based on a randomly generated (0, 1, -1)-signature code, previous studies used the signature code over a noisy multiple-access adder channel, and only the user state information (USI) was decoded by the signature decoder. However, by considering the communication model as a compressed sensing process, it is possible to estimate the channel coefficients while identifying users. In this study, to improve the efficiency of the decoding process, we propose an iterative deep neural network (DNN)-based decoder. Simulation results show that for the randomly generated (0, 1, -1)-signature code, the proposed DNN-based decoder requires less computing time than the classical signal recovery algorithm used in compressed sensing while achieving higher UI and channel estimation (CE) accuracies.

This letter expands the previously proposed High Time Resolution Carrier Interferometry (HTRCI) to estimate a larger amount of channel status information (CSI). HTRCI is based on a comb-type pilot symbol on OFDM and CSI for null subcarriers are interpolated by time-domain signal processing. In order to utilize such null pilot subcarriers for increasing estimable CSI, they should generally be separated in frequency-domain prior to estimation and interpolation processes. The main proposal is its separation scheme in conjunction with the HTRCI treatment of the temporal domain. Its effectiveness is verified by a pilot de-contamination on downlink two-cell MIMO transmission scenario. Binary error rate (BER) performance can be improved in comparison to conventional HTRCI and zero padding (ZP) which replaces the impulse response alias with zeros.

This paper proposes time division multiplexing (TDM) based reference signal (RS) multiplexing for faster-than-Nyquist (FTN) signaling using orthogonal frequency division multiplexing (OFDM). We also propose a subframe structure in which a cyclic prefix (CP) is appended to only the TDM based RS block and the first FTN symbol to achieve accurate estimation of the channel response in a multipath fading channel with low CP overhead. Computer simulation results show that the loss in the required average received SNR satisfying the average block error rate (BLER) of 10-2 using the proposed TDM based RS multiplexing from that with ideal channel estimation is suppressed to within approximately 1.2dB and 1.7dB for QPSK and 16QAM, respectively. This is compared to when the improvement ratio of the spectral efficiency from CP-OFDM is 1.31 with the rate-1/2 turbo code. We conclude that the TDM based RS multiplexing with the associated CP multiplexing is effective in achieving accurate channel estimation for FTN signaling using OFDM.

In this paper, we explore the physical layer security of an Internet of Things (IoT) network comprised of multiple relay-user pairs in the presence of multiple malicious eavesdroppers and channel estimation error (CEE). In order to guarantee secure transmission with channel estimation error, we propose a channel estimation error oriented joint relay-user pair and friendly jammer selection (CEE-JRUPaFJS) scheme to improve the physical layer security of IoT networks. For the purpose of comparison, the channel estimation error oriented traditional round-robin (CEE-TRR) scheme and the channel estimation error oriented traditional pure relay-user pair selection (CEE-TPRUPS) scheme are considered as benchmark schemes. The exact closed-form expressions of outage probability (OP) and intercept probability (IP) for the CEE-TRR and CEE-TPRUPS schemes as well as the CEE-JRUPaFJS scheme are derived over Rayleigh fading channels, which are employed to characterize network reliability and security, respectively. Moreover, the security-reliability tradeoff (SRT) is analyzed as a metric to evaluate the tradeoff performance of CEE-JRUPaFJS scheme. It is verified that the proposed CEE-JRUPaFJS scheme is superior to both the CEE-TRR and CEE-TPRUPS schemes in terms of SRT, which demonstrates our proposed CEE-JRUPaFJS scheme are capable of improving the security and reliability performance of IoT networks in the face of multiple eavesdroppers. Moreover, as the number of relay-user pairs increases, CEE-TPRUPS and CEE-JRUPaFJS schemes offer significant increases in SRT. Conversely, with an increasing number of eavesdroppers, the SRT of all these three schemes become worse.

Sparse modeling is one of the most active research areas in engineering and science. The technique provides solutions from far fewer samples exploiting sparsity, that is, the majority of the data are zero. This paper reviews sparse modeling in radio techniques. The first half of this paper introduces direction-of-arrival (DOA) estimation from signals received by multiple antennas. The estimation is carried out using compressed sensing, an effective tool for the sparse modeling, which produces solutions to an underdetermined linear system with a sparse regularization term. The DOA estimation performance is compared among three compressed sensing algorithms. The second half reviews channel state information (CSI) acquisitions in multiple-input multiple-output (MIMO) systems. In time-varying environments, CSI estimated with pilot symbols may be outdated at the actual transmission time. We describe CSI prediction based on sparse DOA estimation, and show excellent precoding performance when using the CSI prediction. The other topic in the second half is sparse Bayesian learning (SBL)-based channel estimation. A base station (BS) has many antennas in a massive MIMO system. A major obstacle for using the massive MIMO system in frequency-division duplex mode is an overhead for downlink CSI acquisition because we need to send many pilot symbols from the BS and to get the feedback from user equipment. An SBL-based channel estimation method can mitigate this issue. In this paper, we describe the outline of the method, and show that the technique can reduce the downlink pilot symbols.

This paper proposes a novel weight derivation method to improve adaptive array interference suppression performance based on our previously conceived sample matrix inversion algorithm using common correlation matrix (CCM-SMI), by data-aided approach. In recent broadband wireless communication system such as orthogonal frequency division multiplexing (OFDM) which possesses lots of subcarriers, the computation complexity is serious problem when using SMI algorithm to suppress unknown interference. To resolve this problem, CCM based SMI algorithm was previously proposed. It computes the correlation matrix by the received time domain signals before fast Fourier transform (FFT). However, due to the limited number of pilot symbols, the estimated channel state information (CSI) is often incorrect. It leads limited interference suppression performance. In this paper, we newly employ a data-aided channel state estimation. Decision results of received symbols are obtained by CCM-SMI and then fed-back to the channel estimator. It assists improving CSI estimation accuracy. Computer simulation result reveals that our proposal accomplishes better bit error rate (BER) performance in spite of the minimum pilot symbols with a slight additional computation complexity.

This paper expands our previously proposed semi-blind uplink interference suppression scheme for multicell multiuser massive MIMO systems to support multi modulus signals. The original proposal applies the channel state information (CSI) aided blind adaptive array (BAA) interference suppression after the beamspace preprocessing and the decision feedback channel estimation (DFCE). BAA is based on the constant modulus algorithm (CMA) which can fully exploit the degree of freedom (DoF) of massive antenna arrays to suppress both inter-user interference (IUI) and inter-cell interference (ICI). Its effectiveness has been verified under the extensive pilot contamination constraint. Unfortunately, CMA basically works well only for constant envelope signals such as QPSK and thus the proposed scheme should be expanded to cover QAM signals for more general use. This paper proposes to apply the multi modulus algorithm (MMA) and the minimum mean square error weight derivation based on data-aided sample matrix inversion (MMSE-SMI). It can successfully realize interference suppression even with the use of multi-level envelope signals such as 16QAM with satisfactorily outage probability performance below the fifth percentile.

This paper proposes a deterministic pilot pattern placement optimization scheme based on the quantum genetic algorithm (QGA) which aims to improve the performance of sparse channel estimation in orthogonal frequency division multiplexing (OFDM) systems. By minimizing the mutual incoherence property (MIP) of the sensing matrix, the pilot pattern placement optimization is modeled as the solution of a combinatorial optimization problem. QGA is used to solve the optimization problem and generate optimized pilot pattern that can effectively avoid local optima traps. The simulation results demonstrate that the proposed method can generate a sensing matrix with a smaller MIP than a random search or the genetic algorithm (GA), and the optimized pilot pattern performs well for sparse channel estimation in OFDM systems.

This paper improves our previously proposed semi-blind uplink interference suppression scheme for multicell multiuser massive MIMO systems by incorporating the beamspace approach. The constant modulus algorithm (CMA), a known blind adaptive array scheme, can fully exploit the degree of freedom (DoF) offered by massive antenna arrays to suppress inter-user interference (IUI) and inter-cell interference (ICI). Unfortunately, CMA wastes a lot of the benefit of DoF for null-steering even when the number of incoming signal is fewer than that of receiving antenna elements. Our new proposal introduces the beamspace method which degenerates the number of array input for CMA from element-space to beamspace. It can control DoF expended for subsequent interference suppression by CMA. Optimizing the array beamforming gain and null-steering ability, can further improve the output signal-to-interference and noise power ratio (SINR). Computer simulation confirmed that our new proposal reduced the required number of data symbols by 34.6%. In addition, the 5th percentile SINR was also improved by 14.3dB.

This study proposes a Peak-to-Average Power Ratio (PAPR) reduction method using an adaptive Finite Impulse Response (FIR) filter in Orthogonal Frequency Division Multiplexing systems. At the transmitter, an iterative algorithm that minimizes the p-norm of a transmitted signal vector is used to update the weight coefficients of the FIR filter to reduce PAPR. At the receiver, the FIR filter used at the transmitter is estimated using pilot symbols, and its effect can be compensated for by using an equalizer for proper demodulation. Simulation results show that the proposed method is superior to conventional methods in terms of the PAPR reduction and computational complexity. It also shows that the proposed method has a trade-off between PAPR reduction and bit error rate performance.

In-phase and quadrature-phase imbalance (IQI) at transceivers is one of the serious hardware impairments degrading system performance. In this paper, we study the overall performance of massive multi-user multi-input multi-output (MU-MIMO) systems with IQI at both the base station (BS) and user equipments (UEs), including the estimation of channel state information, required at the BS for the precoding design. We also adopt a widely-linear precoding based on the real-valued channel model to make better use of the image components of the received signal created by IQI. Of particular importance, we propose estimators of the real-valued channel and derive the closed-form expression of the achievable downlink rate. Both the analytical and simulation results show that IQI at the UEs limits the dowlink rate to finite ceilings even when an infinite number of BS antennas is available, and the results also prove that the widely-linear precoding based on the proposed channel estimation method can improve the overall performance of massive MU-MIMO systems with IQI.

A low complexity channel estimation scheme using data-dependent superimposed training (DDST) is proposed in this paper, where the pilots are inserted in more than one block, rather than the single block of the original DDST. Comparing with the original DDST (which improves the performance of channel estimation at the cost of huge computational overheads), the proposed DDST scheme improves the performance of channel estimation with only a slight increase in the consumption of computation resources. The optimal precoder is designed to minimize the data distortion caused by the rank-deficient precoding. The optimal pilots and placement are also provided to improve the performance of channel estimation. In addition, the impact of power allocation between the data and pilots on symbol detection is analyzed, the optimal power allocation scheme is derived to maximize the effective signal-to-noise ratio at the receiver. Simulation results are presented to show the computational advantage of the proposed scheme, and the advantages of the optimal pilots and power allocation scheme.

This paper analyzes the performance of single-cell massive multiple-input multiple-output (MIMO) systems with non-orthogonal pilots. Specifically, closed-form expressions of the normalized channel estimation error and achievable uplink capacity are derived for both least squares (LS) and minimum mean square error (MMSE) estimation. Then a pilot reconstruction scheme based on orthogonal Procrustes principle (OPP) is provided to reduce the total normalized mean square error (NMSE) of channel estimations. With these reconstructed pilots, a two-step pilot assignment method is formulated by considering the correlation coefficient among pilots to reduce the maximum NMSE. Based on this assignment method, a step-by-step pilot power allocation scheme is further proposed to improve the average uplink signal-to-interference and noise ratio (SINR). At last, simulation results demonstrate the superiority of the proposed approaches.

In this paper, we analyze the impact of channel estimation errors in an amplify-and-forward (AF)-based two-way relaying network (TWRN) where adaptive modulation (AM) is employed in individual relaying path. In particular, the performance degradation caused by channel estimation error is investigated over Nakagami-m fading channels. We first derive an end-to-end signal-to-noise ratio (SNR), a cumulative distribution function, and a probability density function in the presence of channel estimation error for the AF-based TWRN with adaptive modulation (TWRN-AM). By utilizing the derived SNR statistics, we present accurate expressions of the average spectral efficiency and bit error rates with an outage-constraint in which transmission does not take place during outage events of bidirectional communications. Based on our derived analytical results, an optimal power allocation scheme for TWRN-AM is proposed to improve the average spectral efficiency by minimizing system outages.