Power analysis can be used to attack many implementations of cryptosystems, e.g., RSA and ECC, and the doubling attack is a collision based power analysis performed on two chosen ciphertexts. In this paper, we introduced a modified doubling attack to threaten RSA and ECC implementations by exploiting only one chosen ciphertext of small order. To attack the RSA implementations we selected an input of order two while to attack the ECC implementations we exploited one chosen invalid point of small order on a cryptographically weak curve rather than on the original curve. We showed that several existing power analysis countermeasures for RSA and ECC implementations are still vulnerable to the proposed attack. To prevent the proposed attack, we suggested countermeasures for RSA as well as for ECC.

To reduce the error of channel estimation caused by noise, a novel noise suppression method based on the degree of confidence is proposed in this paper. The false alarm and false dismissal probabilities, corresponding to noise being taken as part of channel impulse response (CIR) and part of the CIR being mis-detected as noise, respectively, are also investigated. A false alarm reduction method is therefore presented to reduce the false alarms in the estimated CIR while the mis-detection ratio still remains low. Simulation results show the effectiveness of the proposed method.

This paper presents the design and performance evaluation of a power-controlled topology optimization and channel assignment scheme for Hybrid MAC (abbreviated PTOCA) in wireless sensor networks that require comparatively high data rate communications. In order to maximize the network performance, PTOCA is designed with a cross-layer concept of MAC and network layers, which provides multi-channel TDMA scheduling based on the information of the network topology optimized by transmission power control. The simulation results show that by using the proposed scheme, the network throughput and energy efficiency can be significantly improved. PTOCA is also more effective in improving the network performance when the nodes are uniformly deployed on the sensor field rather than when they are randomly distributed.

Some statistical characteristics, including the means and the cross-correlations, of frequency-selective Rician fading channels seen by orthogonal frequency division multiplexing (OFDM) subcarriers are derived in this paper. Based on a pairwise error probability analysis, the mean vector and the cross-correlation matrix are used to obtain an upper bound of the overall bit-error rate (BER) in a closed-form for coded OFDM signals with and without inter-carrier interference. In this paper, the overall BER is defined as the average BER of OFDM signals of all subcarriers obtained by considering their cross-correlations. Numerical examples are presented to compare the proposed upper bound of the overall BERs and the overall BERs obtained by simulations.

This study aims how to contain the environment reflection in a dynamic on-body ultra wideband (UWB) channel model. Based on a measurement approach, it is demonstrated that a complete body area channel model can be regarded as a combination of the on-body propagation characteristic and additional components from the environment. Based on such a channel model, the effect of environment reflection on the average bit error rate performance was investigated for a typical impulse radio UWB system.

In this paper, we performed six human movement simulation by a commercial software (Poser7). We performed FDTD simulations for body area network propagation with one transmitter and six receivers. Received amplitudes were calculated for every time frame of 1/30 s interval. We also demonstrated a polarization diversity effectiveness for dynamic wearable body area network propagation.

In this letter, we analyze the amplify-and-forward (AF) two-way cooperative relaying scheme with regard to the average data transmission rate and the symbol error probability. By investigating the Moment-Generating function (MGF) and the k-th moment of “extra-harmonic” mean of two variables, we derive an exact closed-form expression for the symbol error probability (SEP) and the approximate average sum rate. Analysis results show that the proposed scheme achieves higher SEP performance as well as a lower data rate than the conventional AF two-way scheme. Additionally, it also matches the SEP performance of the one-way AF cooperative scheme but attains higher sum rate. Finally, Monte Carlo simulation results will be shown to confirm our analytical results.

In this letter, a study on the end-to-end outage performance of dual-hop non-regenerative relaying in the presence of co-channel interference is presented. We assume that both the desired and the interfering signals are subjected to Nakagami-m fading. Exact analytical expressions, as well as tight lower bounds of the end-to-end outage probability, are derived. An asymptotic expression for the outage probability at high values of Signal-to-Interference Ratio is also presented. Furthermore, we also propose the optimal power allocation for high values of Signal-to-Interference Ratio. Extensive numerically evaluation and computer simulation results are presented to verify the validity and the accuracy of the proposed analysis.

The adequate evaluation of sound quality is an important issue for the lossy compression codecs, such as MP3. ITU-R Rec BS. 1387-1 (PEAQ – Perceptual Evaluation of Audio Quality) is the most widely used method to evaluate sound quality objectively. However, PEAQ can only be used for mono signals or two channel stereo signals, because it considers only timbral factors when assessing sound quality. This paper introduces an improved objective quality assessment method that can be used for mono signals and multichannel audio signals that considers both “spatial” and “timbral” factors. The “spatial” factors, which measure perceptual distortions in spatial impression, are important to evaluate the quality of multichannel sounds.

In this letter, we derive another exact bit error rate (BER) for decode-and-forward (DF) relay systems over Rayleigh fading channels. At first, our focus is on fixed-DF (FDF) relay schemes in which the probability density function (PDF) is derived based on error-events at relay nodes. Some insight into how erroneous detection and transmission at relay nodes affect both the combined signal-to-noise ratio (SNR) and the averaged BER is obtained, and cooperative diversity is observed from the closed-form BER expression. In addition, the developed analytical method is extended to adaptive-DF (ADF) schemes and the exact BER expressions are derived. Simulation results are finally presented to validate the analysis.

This paper proposes a low-complexity signal detection algorithm for spatially correlated multiple-input multiple-output (MIMO) channels. The proposed algorithm sets a minimum mean-square error (MMSE) detection result to the starting point, and searches for signal candidates in multi-dimensions of the noise enhancement from which the MMSE detection suffers. The multi-dimensional search is needed because the number of dominant directions of the noise enhancement is likely to be more than one over the correlated MIMO channels. To reduce the computational complexity of the multi-dimensional search, the proposed algorithm limits the number of signal candidates to O(NT) where NT is the number of transmit antennas and O( ) is big O notation. Specifically, the signal candidates, which are unquantized, are obtained as the solution of a minimization problem under a constraint that a stream of the candidates should be equal to a constellation point. Finally, the detected signal is selected from hard decisions of both the MMSE detection result and unquantized signal candidates on the basis of the log likelihood function. For reducing the complexity of this process, the proposed algorithm decreases the number of calculations of the log likelihood functions for the quantized signal candidates. Computer simulations under a correlated MIMO channel condition demonstrate that the proposed scheme provides an excellent trade-off between BER performance and complexity, and that it is superior to conventional one-dimensional search algorithms in BER performance while requiring less complexity than the conventional algorithms.

A low-complexity Reed-Solomon (RS) decoder design based on the modified Euclidean (ME) algorithm proposed by Truong is presented in this paper. Low complexity is achieved by reformulating Truong's ME algorithm using the proposed polynomial manipulation scheme so that a more compact polynomial representation can be derived. Together with the developed folding scheme and simplified boundary cell, the resulting design effectively reduces the hardware complexity while meeting the throughput requirements of optical communication systems. Experimental results demonstrate that the developed RS(255, 239) decoder, implemented in the TSMC 0.18 µm process, can operate at up to 425 MHz and achieve a throughput rate of 3.4 Gbps with a total gate count of 11,759. Compared to related works, the proposed decoder has the lowest area requirement and the smallest area-time complexity.

In this letter, we propose two low complexity algorithms for least square (LS) and minimum mean square error (MMSE) based multi-cell joint channel estimation (MJCE). The algorithm for LS-MJCE achieves the same complexity and mean square error (MSE) performance as the previously proposed most efficient algorithm, while the algorithm for MMSE-MJCE is superior to the conventional ones, in terms of either complexity or MSE performance.

In this paper, a novel channel estimation method for time domain synchrotrons orthogonal frequency domain multiplexing (TDS-OFDM) based on training sequence cyclic reconstruction is proposed to eliminate residual inter-block interference (IBI); it estimates the channel impulse response (CIR) in an iterative manner. A simulation and analysis show that the proposed method can effectively perform the channel estimation over long-delay multipath channels with low complexity.

Due to the reuse factor reduction, the same frequencies are reused in adjacent neighboring cells, which causes an attendant increase in co-channel interference (CCI). CCI has already become the limiting factor in the performance of orthogonal frequency division multiplexing (OFDM) based cellular systems. Joint maximum likelihood sequence estimation (JMLSE) based interference cancellation algorithms have been under intense research. However, despite the fact that the error probability of JMLSE is critical for analyzing the performance, to the best of our knowledge, the mathematical expression has not been derived for MQAM-OFDM yet. Direct computation of the error probability involves integrating a multi-dimensional Gaussian distribution that has no closed-form solution. Therefore, an alternative way is to upper and lower bound the error probability with computable quantities. In this paper, firstly, both the upper and the conventional lower error probability bounds of JMLSE are derived for MQAM-OFDM systems based on a genie-aided receiver. Secondly, in order to reduce the gap between the conventional lower bound and the simulation results, a tighter lower bound is derived by replacing the genie with a less generous one. Thirdly, those derived error probability bounds are generalized to the receiver diversity scheme. These error probability bounds are important new analytical results that can be used to provide rapid and accurate estimation of the BER performance over any MQAM scheme and an arbitrary number of interferers and receive antennas.

A novel signaling scheme is proposed for iterative channel estimation and data decoding in fast fading channels. The basic idea is to bias the occurrence probability of transmitted symbols. A priori information about the bias is utilized for channel estimation. The bias-based scheme is constructed as a serially concatenated code, in which a convolutional code and a biased nonlinear block code are used as the outer and inner codes, respectively. This construction allows the receiver to estimate channel state information (CSI) efficiently. The proposed scheme is numerically shown to outperform conventional pilot-based schemes in terms of spectral efficiency for moderately fast fading channels.

In this letter, we propose an effective preamble based on constant amplitude and zero auto-correlation (CAZAC) sequence for multi-input multi-output (MIMO) and cooperative WiMedia ultra-wideband (UWB) systems. The proposed preamble even provides better single-channel estimation performance than the preamble specified in the standard in severe UWB channel model. The effectiveness of the proposed design is confirmed through the mean square error (MSE) performance.

In this letter, the interference cancellation technique is introduced to single carrier (SC) block transmission systems in sparse Rician frequency selective fading channels, and an effective equalizer is presented. Hard decision on the transmitted signal is made by commonly used SC equalizers, and every multipath signal can be constructed by the initial solution and channel state information. Then, final demodulation result is obtained by the line-of-sight component in the received signal which can be achieved by cancelling the other multipath signals in the received signal. The solution can be further used to construct the multipath signals allowing a multistage detector with higher performance to be realized. It is shown by Monte Carlo simulations in an SUI-5 channel that the new scheme offers dramatically higher performance than traditional equalization schemes.

It is important to find an efficient design-for-testability methodology that satisfies both security and testability, although there exists an inherent contradiction between security and testability for digital circuits. In our previous work, we reported a secure and testable scan design approach by using extended shift registers that are functionally equivalent but not structurally equivalent to shift registers, and showed a security level by clarifying the cardinality of those classes of shift register equivalents (SR-equivalents). However, SR-equivalents are not always secure for scan-based side-channel attacks. In this paper, we consider a scan-based differential-behavior attack and propose several classes of SR-equivalent scan circuits using dummy flip-flops in order to protect the scan-based differential-behavior attack. To show the security level of those SR-equivalent scan circuits, we introduce a differential-behavior equivalent relation and clarify the number of SR-equivalent scan circuits, the number of differential-behavior equivalent classes and the cardinality of those equivalent classes.

In view of the frequent and complex changes of GNSS visible satellite constellation in attitude determination system, an improved attitude signal simulation algorithm for high dynamic satellite signal simulator is proposed. Based on Software Radio architecture, elevation calculation in the antenna coordinate system and channel state control logic under the condition of carrier attitude changes are introduced into the algorithm to implement synchronous scheduling of visible satellite constellation and attitude signal simulation. This work guarantees the simulator to run constantly and stably for a long time with the advantages of high precision and low complexity. Compared with synchronous positioning results from the receiver, the simulation results show that not only can the output signals of the simulator accurately reflect the carrier's attitude characteristics, but also no step error is generated and the positioning precision is not influenced when visible satellite constellation changes.