In this paper, we introduce generalized feed-forward shift registers (GF2SR) to apply them to secure and testable scan design. Previously, we introduced SR-equivalents and SR-quasi-equivalents which can be used in secure and testable scan design, and showed that inversion-inserted linear feed-forward shift registers (I2LF2SR) are useful circuits for the secure and testable scan design. GF2SR is an extension of I2LF2SR and the class is much wider than that of I2LF2SR. Since the cardinality of the class of GF2SR is much larger than that of I2LF2SR, the security level of scan design with GF2SR is much higher than that of I2LF2SR. We consider how to control/observe GF2SR to guarantee easy scan-in/out operations, i.e., state-justification and state-identification problems are considered. Both scan-in and scan-out operations can be overlapped in the same way as the conventional scan testing, and hence the test sequence for the proposed scan design is of the same length as the conventional scan design. A program called WAGSR (Web Application for Generalized feed-forward Shift Registers) is presented to solve those problems.

A novel tunneling field-effect transistor (TFET) featuring the sigma-shape embedded SiGe sources and recessed channel is proposed. The gate facing the source effectively focuses the E-field at the tip of the source and eliminates the gradual turn-on issue of planar TFETs. The fabrication scheme modified from the state-of-the-art 45 nm/32 nm CMOS technology flows provides a unique benefit in the co-integrability and the control of ID-VGS characteristics. The feasibility is verified with TCAD process simulation of the device with 14 nm of the gate dimension. The device simulation shows 5-order change in the drain current with a gate bias change less than 300 mV.

This paper clarifies the effects of metal wires placed around a Multiple-Input-Multiple-Output (MIMO) array with the goal of improving the channel capacity in near-field MIMO systems. Tests are performed on dual-dipole arrays with metal wires placed parallel to the dipoles. If the antenna elements have an appropriate half-power beamwidth (HPBW), there is a clear improvement in the channel capacity of the dual-dipole array. The metal wires are used to increase the multipath richness and the locations of the wires significantly impact the channel capacity. A significant increase in the channel capacity is observed even if only one metal wire is placed in the proper location. We verified the generality of applying a metal wire to improve the channel capacity and that the improvement in the channel capacity is approximately proportional to the number of metal wires.

As means to control interface reactions between HfO2 and Ge(100), chemical vapor deposition (CVD) of ultrathin Ta-rich oxide using Tri (tert-butoxy) (tert-butylimido) tantalum (Ta-TTT) on chemically-cleaned Ge(100) has been conducted prior to atomic-layer controlled CVD of HfO2 using tetrakis (ethylmethylamino) hafnium (TEMA-Hf) and O3. The XPS analysis of chemical bonding features of the samples after the post deposition N2 annealing at 300 confirms the formation of TaGexOy and the suppression of the interfacial GeO2 layer growth. The energy band structure of HfO2/TaGexOy/Ge was determined by the combination of the energy bandgaps of HfO2 and TaGexOy measured from energy loss signals of O 1s photoelectrons and from optical absorption spectra and the valence band offsets at each interface measured from valence band spectra. From the capacitance-voltage (C-V) curves of Pt-gate MIS capacitors with different HfO2 thicknesses, the thickness reduction of TaGexOy with a relative dielectric constant of 9 is a key to obtain an equivalent SiO2 thickness (EOT) below 0.7 nm.

This paper proposes a novel multichannel speech enhancement technique for reverberant rooms that is effective when noise sources are spatially stationary, such as a projector fan noise, an air-conditioner noise, and unwanted speech sources at the back of microphones. Speech enhancement performance of the conventional multichannel Wiener filter (MWF) degrades when the Signal-to-Noise Ratio (SNR) of the current microphone input signal changes from the noise-only period. Furthermore, the MWF structure is computationally inefficient, because the MWF updates the whole spatial beamformer periodically to track switching of the speakers (e.g. turn-taking). In contrast to the MWF, the proposed method reduces noise independently of the SNR. The proposed method has a novel two-stage structure, which reduces noise and distortion of the desired source signal in a cascade manner by using two different beamformers. The first beamformer focuses on noise reduction without any constraint on the desired source, which is insensitive to SNR variation. However, the output signal after the first beamformer is distorted. The second beamformer focuses on distortion reduction of the desired source signal. Theoretically, complete elimination of distortion is assured. Additionally, the proposed method has a computationally efficient structure optimized for spatially stationary noise reduction problems. The first beamformer is updated only when the speech enhancement system is initialized. Only the second beamformer is updated periodically to track switching of the active speaker. The experimental results indicate that the proposed method can reduce spatially stationary noise source signals effectively with less distortion of the desired source signal even in a reverberant conference room.

Enocoro-128v2 is a lightweight stream cipher submitted to Cryptography Research and Evaluation Committees (CRYPTREC). In this paper, we first describe a side channel attack on Enocoro-128v2. We show that all secret key bytes of Enocoro-128v2 can be recovered by correlation power analysis, and it is shown by an experiment that around 6000 traces are needed to recover the secret key on SASEBO-GII (Side-channel Attack Standard Evaluation Board). We second propose a countermeasure with threshold implementation technique, which allows Enocoro-128v2 to be resistant against correlation power analysis as long as less than 105 traces are used.

Spectrum sharing cognitive radio (CR) with maximal ratio combining (MRC) diversity under asymmetric fading is studied. Specifically, the channel on the secondary transmitter (STx) to the secondary receiver (SRx) link is Nakagami-m distributed while the channel on the STx to the primary receiver (PRx) link is Rayleigh distributed, and the channel state information (CSI) on the STx-PRx link is assumed to be outdated due to feedback delay. The outage capacity of the secondary user (SU) is derived under the average interference and peak transmit power constraints. The results supported by simulations are presented and show the effects of various system parameters on the outage capacity. Particularly, it is shown that the outdated CSI has no impact on the outage capacities in the cases of low peak transmit power constraint and zero-outage probability. It is also shown that MRC diversity can significantly improve the outage capacity especially for the zero-outage capacity and the outage capacity under low outage probability.

In precoded TDD MIMO systems, precoding is done based on the downlink CSI, which can be predicted according to the outdated uplink CSI. This letter proposes a double-scale channel prediction scheme where frame-scale Kalman filters and pilot-symbol-scale AR predictors jointly predict the needed downlink CSI.

IEEE 802.11ac uses DL MU-MIMO and channelization for very high throughput. We propose a new algorithm for adaptive channelization in DL MU-MIMO WLANs. The proposed scheme can enhance the throughput efficiency for DL MU-MIMO transmission by adaptively applying the channelization scheme according to data size and MCS. Moreover, our proposal can reduce the overhead due to the exchange of control frames for DL MU-MIMO transmission in WLANs. A performance evaluation shows that the proposed scheme is superior to IEEE 802.11ac WLAN.

The design and measured results of a 120 GHz/140 GHz dual-channel OOK (ON-OFF Keying) receiver are presented in this paper. Because a signal with very wide frequency width is difficult to process in a single-channel receiver, a dual-channel configuration with channel selection is adopted in the proposed receiver. The proposed receiver is fabricated using 65 nm CMOS technology. The measured data rate of 3.0 and 3.6 Gbps, minimum sensitivity of -25.6 and -27.1 dBm, communication distance of 0.30 and 0.38 m are achieved in the 120- and 140-GHz receiver, respectively. The correct channel selection is achieved in the 120-GHz receiver. These results indicate the possibility of the CMOS multiband receiver operating at over 100 GHz for low-power high-speed proximity wireless communication systems.

In this paper, we investigate the outage probability of a dual-hop, channel state information (CSI)-assisted amplify-and-forward (AF) multiple antenna relay network when interference is present at the relay. The source and the destination are equipped with multiple antennas and communicate with each other with the help of a single antenna relay. Transmit antenna selection is performed at the source for source-relay communication. Three receiver combining schemes namely, maximal ratio combining (MRC), equal gain combining (EGC) and selection combining (SC) are considered at the destination. Exact analytical expressions are derived for the outage probability of MRC and SC receiving while an approximate expression is obtained for EGC. Monte-Carlo simulation results are provided to complement analytical results and to demonstrate the effect of interference.

A wireless node is called isolated if it has no links to other nodes. The number of isolated nodes in a wireless network is an important connectivity index. However, most previous works on analytically determining the number of isolated nodes were not based on practical channel models. In this work, we study this problem using a generic probabilistic channel model that can capture the behaviors of the most widely used channel models, including the disk graph model, the Bernoulli link model, the Gaussian white noise model, the Rayleigh fading model, and the Nakagami fading model. We derive the expected number of isolated nodes and further prove that their distribution asymptotically follows a Poisson distribution. We also conjecture that the nonexistence of isolated nodes asymptotically implies the connectivity of the network, and that the probability of connectivity follows the Gumbel function.

An 8-bit 100-kS/s successive approximation (SA) analog-to-digital converter (ADC) is proposed for measuring EEG and MEG signals in an 88 point. The architectures of a SA ADC with a single-ended analog input and a split-capacitor-based digital-to-analog converter (SC-DAC) are used to reduce the power consumption and chip area of the entire ADC. The proposed SA ADC uses a time-domain comparator that has an input offset self-calibration circuit. It also includes a serial output interface to support a daisy channel that reduces the number of channels for the multi-point sensor interface. It is designed by using a 0.35-µm 1-poly 6-metal CMOS process with a 3.3 V supply to implement together with a conventional analog circuit such as a low-noise-amplifier. The measured DNL and INL of the SA ADC are +0.63/-0.46 and +0.46/-0.51 LSB, respectively. The SNDR is 48.39 dB for a 1.11 kHz analog input signal at a sampling rate of 100 kS/s. The power consumption and core area are 38.71 µW and 0.059 mm2, respectively.

This paper presents a power analysis that applies to elliptic curves over generalized Mersenne prime field Fp. This prime field enables efficient modular reductions which influence the computational performance of an elliptic curve cryptosystem. The general modular reductions stochastically calculate extra operations. Some studies showed the possibility of power analysis attacks to scalar multiplication with a unified code by using the statistical information of extra operations. In this paper, we present the statistical experiment and possibility of attacks, and propose the more sensitive attack and the countermeasure without performance impact.

In this paper, an extended best linear unbiased estimator (EBLUE) based on a periodic training sequence is proposed and investigated for frequency offset estimation in orthogonal frequency division multiplexing (OFDM) systems. The structure of EBLUE is general and flexible so it adapts to different complexity constraints, and is attractive in practical implementation. Performance analysis and design strategy of EBLUE are provided to realize the best tradeoff between performance and complexity. Moreover, closed-form results of both weight and performance make EBLUE even more attractive in practical implementation. Both the performance and complexity of EBLUE are compared with other proposals and the Cramer-Rao lower bound (CRLB) to demonstrate the merit of EBLUE.

In this paper, we investigate the user scheduling algorithms with statistical eigen-mode transmission (SET) for downlink multiuser multiple-input multiple-output (MU-MIMO) system by utilizing the statistical channel state information (SCSI). Given the objective of maximizing the ergodic achievable sum rate per group (EASRPG), our first proposal, the Munkres user assignment algorithm (MUAA), solves the optimal user grouping problem. Different from the conventional user grouping algorithm (e.g. max-min method), MUAA can efficiently solve the user assignment problem and acquire an optimal solution. However, some user groups of the optimal solution called “unfriendly” groups severely degrade the EASRPG by performing the multiuser SET (MU-SET) due to excessive inter-user interference. To overcome this obstacle, the MUAA with sequential iterative separation (MUAA-SIS) is proposed to find the “unfriendly” groups and switch from the MU-SET to the single-user SET. Finally, our numerical results show that MUAA-SIS offers a higher EASRPG.

Precoding is an excellent choice for complementing the MIMO systems. Linear precoding techniques offer better performance at low signal-to-noise ratios (SNRs) while non-linear techniques perform better at higher SNRs. In addition, the non-linear techniques can achieve near optimal capacity at the expense of reasonable levels of complexity. However, precoding depends on the knowledge of the wireless channel. Recent work on MIMO systems have shown that channel-knowledge at the transmitter, in either full or partial forms, can increase the channel capacity and system performance considerably. Therefore, hybrid techniques should be deployed in order to obtain a better trade-off in terms of complexity and performance. In this paper, we present a hybrid precoding technique which deals with the condition of partial channel-knowledge while offering robustness against the effects of correlation and poorly scattered channels while at the same time keeping low levels of complexity and high performance.

In this paper, we propose a high-speed full-duplex optical wireless communication system using a single channel imaging receiver for personal area network applications. This receiver is composed of an imaging lens, a small sensitive-area photodiode, and a 2-aixs actuator and it can reject most of the background light. Compared with the previously proposed system with single wide field-of-view (FOV) non-imaging receiver, the coverage area at 12.5 Gb/s is extended by > 20%. Furthermore, since the rough location information of the user is available in our proposed system, instead of searching for the focused light spot over a large area on the focal plane of the lens, only a small possible area needs to be scanned. In addition, by pre-setting a proper comparison threshold when searching for the focused light spot, the time needed for searching can be further reduced. Proof-of-concept experiments have been carried out and the results show that with this partial searching algorithm and pre-set threshold, better performance is achieved.

To accurately evaluate and manage future distributed wireless networks, it is indispensable to fully understand cooperative propagation channels. In this contribution, we propose cascaded multi-keyhole channel models for analyzing cooperative diversity wireless communications. The cascaded Wishart distribution is adopted to investigate the eigenvalue distribution of the multi-keyhole MIMO (multiple input multiple output) channel matrix, and the capacity performance is also presented for the wireless systems over such channels. A diversity order approximation method is proposed for better evaluating the eigenvalue and capacity distributions. The good match of analytical derivations and numerical simulations validates the proposed models and analysis methods. The proposed models can provide an important reference for the optimization and management of cooperative diversity wireless networks.

This paper proposes a lattice-reduction-aided MIMO-OFDM receiver with virtual channels; the receiver enables an increase in the downlink transmission speed for a user where the number of transmit antennas is considerably higher than that of the receive antennas. However, the receiver has a higher computational complexity than conventional lattice-reduction-aided MIMO receivers. Accordingly, we also propose novel techniques to reduce the computational complexity for the lattice-reduction-aided MIMO receivers with virtual channels. The proposed MIMO receiver achieves superior performance in 102 MIMO-OFDM systems. Furthermore, the proposed techniques are shown to reduce the computational complexity to approximately 40% of the original configuration in the 102 MIMO-OFDM systems.