In this letter, a flexible and compatible with fine resolution radar frequency measurement receiver is designed. The receiver is implemented on the platform of Virtex-5 Field Programmable Grid Array (FPGA) from Xilinx. The Digital Down Conversion (DDC) without mixer based on polyphase filter has been successfully introduced in this receiver to obtain lower speed data flow and better resolution. This receiver can adapt to more modulation types and higher density of pulse flow, up to 200000 pulses per second. The measurement results indicate that the receiver is capable of detecting radar pulse signal of 0.2us to 2.5ms width with a major frequency root mean square error (RMSE) within 0.44MHz. Moreover, the wider pulse width and the higher decimation rate of DDC result in better performance. This frequency measurement receiver has been successfully used in a spaceborne radar system.

Many autocorrelation-based frequency estimation algorithms have been proposed. However, some of them cannot construct a strict linear prediction (LP) property among the adjacent autocorrelation lags, which affects the estimators' performance. To improve the precision of frequency estimation, two novel autocorrelation based frequency estimation methods of the real sinusoid signal in additive white Gaussian noise (AWGN) are proposed in this paper. Firstly, a simple method is introduced to transform the real sinusoid signal into the noncircular signal. Secondly, the autocorrelation of the noncircular signal is analyzed and a strict LP property is constructed among the adjacent autocorrelation lags of the noncircular signal. Thirdly, the least squares (LS) and reformed Pisarenko harmonic decomposer (RPHD) frameworks are employed to improve estimation accuracy. The simulation results match well with the theoretical values. In addition, computer simulations demonstrate that the proposed algorithm provides high estimation accuracy and good noise suppression capability.

This paper presents the bit error rate (BER) performance of human body communication (HBC) receivers in interference-rich environments. The BER performance was measured while applying an interference signal to the HBC receiver to consider the effect of receiver performance on BER performance. During the measurement, a signal attenuator was used to mimic the signal loss of the human body channel, which improved the repeatability of the measurement results. The measurement results showed that HBC is robust against the interference when frequency selective digital transmission (FSDT) is used as a modulation scheme. The BER performance in this paper can be effectively used to evaluate a communication performance of HBC.

This paper introduces a new noise generation algorithm for vocoder-based speech waveform generation. White noise is generally used for generating an aperiodic component. Since short-term white noise includes a zero-frequency component (ZFC) and inaudible components below 20 Hz, they are reduced in advance when synthesizing. We propose a new noise generation algorithm based on that for velvet noise to overcome the problem. The objective evaluation demonstrated that the proposed algorithm can reduce the unwanted components.

A diversity strategy is efficient to reduce the fluctuation of communication quality caused by fading. In order to further maintain the communication quality and improve the communication capacity, this paper proposes a two-dimensional diversity approach by serially-concatenating spectral precoding and power normalized-differential space time block coding (PN-DSTBC). Spectral precoding is able to take benefit from a frequency diversity effect without loss in spectral efficiency. In addition, PN-DSTBC is robust against serious phase noise in an extremely high frequency (EHF) band by exploiting a spatial diversity effect. However, there is a problem that a naive concatenation degrades the performance due to the imbalance of equivalent noise variances over transmit frequencies. Thus, we examine an equalized PN-DSTBC decoder as a modified approach to uniform equivalent noise variances over frequencies. The performance evaluation using computer simulations shows that the proposed modified approach yields the performance improvement at any modulation schemes and at any number of transmit frequencies. Furthermore, in the case of 64QAM and two transmit frequencies, the performance gain of the modified approach is 4dB larger than that of PN-DSTBC only at uncoded BER=10-4.

A novel time-series relationship among four consecutive real-valued single-tone sinusoid samples is proposed based on their linear prediction property. In order to achieve unbiased frequency estimates for a real sinusoid in white noise, based on the proposed four-point time-series relationship, a constrained least squares cost function is minimized based on the unit-norm principle. Closed-form expressions for the variance and the asymptotic expression for the variance of the proposed frequency estimator are derived, facilitating a theoretical performance comparison with the existing three-point counterpart, called as the reformed Pisarenko harmonic decomposer (RPHD). The region of performance advantage of the proposed four-point based constrained least squares frequency estimator over the RPHD is also discussed. Computer simulations are conducted to support our theoretical development and to compare the proposed estimator performance with the RPHD as well as the Cramer-Rao lower bound (CRLB).

We present a novel hybrid beamforming architecture for high speed 5G technologies. The architecture combines several new concepts to achieve significant hardware and cost reduction for large antenna arrays. Specifically, we employ an on-site code division multiplexing scheme to group several antenna elements into a single analog-to-digital converter (ADC). This approach significantly reduces analog hardware and power requirements by a factor of 8 to 32. Additionally, we employ a novel analog frequency independent beamforming scheme to eliminate phase shifters altogether and allow for coherent combining at the analog front-end. This approach avoids traditional phase-shifter-based approaches typically associated with bulky and inefficient components. Preliminary analysis shows that for an array of 800 elements, as much as 97% reduction in cost and power is achieved using the hybrid beamformer as compared to conventional beamformer systems.

A 19.1-to-20.4 GHz sigma-delta fractional-N frequency synthesizer with two-point modulation (TPM) for frequency modulated continuous wave (FMCW) radar applications is presented. The FMCW synthesizer proposes a digital and voltage controlled oscillator (D/VCO) with large continuous frequency tuning range and small digital controlled oscillator (DCO) gain variation to support TPM. By using TPM technique, it avoids the correlation between loop bandwidth and chirp slope, which is beneficial to fast chirp, phase noise and linearity. The start frequency, bandwidth and slope of the FMCW signal are all reconfigurable independently. The FMCW synthesizer achieves a measured phase noise of -93.32 dBc/Hz at 1MHz offset from a 19.25 GHz carrier and less than 10 µs locking time. The root-mean-square (RMS) frequency error is only 112 kHz with 94 kHz/µs chirp slope, and 761 kHz with a fast slope of 9.725 MHz/µs respectively. Implemented in 65 nm CMOS process, the synthesizer consumes 74.3 mW with output buffer.

This paper proposes a radio propagation prediction method that uses point cloud data based on a hybrid of the ray-tracing (RT) method and an effective roughness (ER) model in urban environments for the fifth generation mobile communications system using high frequency bands. The proposed prediction method incorporates propagation characteristics that consider diffuse scattering from surface irregularities. The validity of the proposed method is confirmed by comparisons of measurement and prediction results gained from the proposed method and a conventional RT method based on power delay and angular profiles. From predictions based on the power delay and angular profiles, we find that the proposed method, assuming the roughness of σh=1mm, accurately predicts the propagation characteristics in the 20GHz band for urban line-of-sight environments. The prediction error for the delay spread is 2.1ns to 9.7ns in an urban environment.

Frequency-hopping sequence (FHS) sets with low-hit-zone (LHZ) have Hamming correlations maintained at a low level as long as the relative time delay between different sequences are limited in a zone around the origin, and thus can be well applied in quasi-synchronous (QS) frequency-hopping multiple-access (FHMA) systems to reduce the mutual interference between different users. Moreover, the periodic partial Hamming correlation (PPHC) properties of employed LHZ-FHS sets usually act as evaluation criterions for the performances of QS-FHMA systems in practice. In this letter, a new class of LHZ-FHS sets is constructed via interleaving techniques. Furthermore, these new LHZ-FHS sets also possess optimal PPHC properties and parameters not included in the related literature.

This paper describes a broadband low phase noise VCO implemented in 0.13 µm CMOS process. A 1-bit switched varactor and a 4-bit capacitor array are adopted in cooperation with the automatic frequency calibration (AFC) circuit to lower the VCO tuning gain (KVCO), with a measured AFC time of 6 µs. Several noise reduction techniques are exploited to minimize the phase noise of the VCO. Measurement results show the VCO generates a high frequency range from 11.37 GHz to 14.8 GHz with a KVCO of less than 270 MHz/V. The prototype exhibits a phase noise of -114.6 dBc/Hz @ 1 MHz at 14.67 GHz carrier frequency and draws 10.5 mA current from a 1.2 V supply. The achieved figure-of-merits (FoM=-186.9dBc/Hz, FoMT=-195.3dBc/Hz) favorably compares with the state-of-the-art.

We propose an approach to allocate bandwidth for a satellite communications (SATCOM) system that includes the recent high-throughput satellite (HTS) with frequency flexibility. To efficiently operate the system, we manage the limited bandwidth resources available for SATCOM by employing a control method that allows the allocated bandwidths to exceed the communication demand of user terminals per HTS beam. To this end, we consider bandwidth allocation for SATCOM as an optimal control problem. Then, assuming that the model of communication requests is available, we propose an optimal control method by combining model predictive control and sparse optimization. The resulting control method enables the efficient use of the limited bandwidth and reduces the bandwidth loss and number of control actions for the HTS compared to a setup with conventional frequency allocation and no frequency flexibility. Furthermore, the proposed method allows to allocate bandwidth depending on various control objectives and beam priorities by tuning the corresponding weighting matrices. These findings were verified through numerical simulations by using a simple time variation model of the communication requests and predicted aircraft communication demand obtained from the analysis of actual flight tracking data.

As an optimal combinatorial object, cyclic perfect Mendelsohn difference family (CPMDF) was introduced by Fuji-Hara and Miao to construct optimal optical orthogonal codes. In this paper, we propose a direct construction of disjoint CPMDFs from the Zeng-Cai-Tang-Yang cyclotomy. Compared with a recent work of Fan, Cai, and Tang, our construction doesn't need to depend on a cyclic difference matrix. Furthermore, strictly optimal frequency-hopping sequences (FHSs) are a kind of optimal FHSs which has optimal Hamming auto-correlation for any correlation window. As an application of our disjoint CPMDFs, we present more flexible combinatorial constructions of strictly optimal FHSs, which interpret the previous construction proposed by Cai, Zhou, Yang, and Tang.

The construction of frequency hopping sequences with good Hamming correlation is the foundation of research in frequency hopping communication. In this letter, classes of optimal low hit zone frequency hopping sequence set are constructed based on the interleaving technology. The results of the study show that the sequence set with large family size is optimal for the Peng-Fan-Lee bound. And all the sequences in the set are inequivalent.

A simple and novel multiple-symbol differential detection (MSDD) scheme is proposed for IEEE 802.15.4 binary phase shift keying (BPSK) receivers. The detection is initiated by estimating and compensating the carrier frequency offset (CFO) effect in the chip sample of interest. With these new statistics, the decisions are jointly made by allowing the observation window length to be longer than two bit intervals. Simulation results demonstrate that detection reliability of the IEEE 802.15.4 BPSK receivers is significantly improved. Namely, at packet error rate (PER) of 1×10-3, the signal-to-noise ratio (SNR) gap between ideal coherent detection (perfect carrier reference phase and no CFO) with differential decoding and conventional optimal single differential coherent detection (SDCD) is filled by 2.1dB when the observation window length is set to 6bit intervals. Then, the benefit that less energy consumed by retransmissions is successfully achieved.

When trying to estimate time-varying multipath channels by applying a basis expansion model (BEM) in orthogonal frequency division multiplexing (OFDM) systems, pilot clusters are contaminated by inter-carrier interference (ICI). The pilot cluster ICI (PC-ICI) degrades the estimation accuracy of BEM coefficients, which degrades system performance. In this paper, a PC-ICI suppression scheme is proposed, in which two coded symbols defined as weighted sums of data symbols are inserted on both sides of each pilot cluster. Under the assumption that the channel has Flat Doppler spectrum, the optimized weight coefficients are obtained by an alternating iterative optimization algorithm, so that the sum of the PC-ICI generated by the encoded symbols and the data symbols is minimized. By approximating the optimized weight coefficients, they are independent of the channel tap power. Furthermore, it is verified that the proposed scheme is robust to the estimation error of the normalized Doppler frequency offset and can be applied to channels with other types of Doppler spectra. Numerical simulation results show that, compared with the conventional schemes, the proposed scheme achieves significant improvements in the performance of PC-ICI suppression, channel estimation and system bit-error-ratio (BER).

By exploiting the inherent sparsity of wireless channels, the channel estimation in an orthogonal frequency division multiplexing (OFDM) system can be cast as a compressed sensing (CS) problem to estimate the channel more accurately. Practically, matching pursuit algorithms such as orthogonal matching pursuit (OMP) are used, where path delays of the channel is guessed based on correlation values for every quantized delay with residual. This full search approach requires a predefined grid of delays with high resolution, which induces the high computational complexity because correlation values with residual at a huge number of grid points should be calculated. Meanwhile, the correlation values with high resolution can be obtained by interpolation between the correlation values at a low resolution grid. Also, the interpolation can be implemented with a low pass filter (LPF). By using this fact, in this paper we substantially reduce the computational complexity to calculate the correlation values in channel estimation using CS.

This paper investigates receive power control for multiuser inductive power transfer (IPT) systems with a single-frequency coil array. The primary task is to optimize the transmit coil currents to minimize the total input power, subject to the minimum receive powers required by individual users. Due to the complicated coupling mechanism among all transmit coils and user pickups, the optimization problem is a non-convex quadratically constrained quadratic program (QCQP), which is analytically intractable. This paper solves the problem by applying the semidefinite relaxation (SDR) technique and evaluates the performance by full-wave electromagnetic simulations. Our results show that a single-frequency coil array is capable of power control for various multiuser scenarios, assuming that the number of transmit coils is greater than or equal to the number of users and the transmission conditions for individual users are uncorrelated.

This paper proposes a stereo wind-noise suppressor with frequency-domain noise averaging. A directional gain for diffuse wind noise is estimated frame by frame using a null beamformer based on interchannel phase difference which blocks the target signal. The wind-noise gain estimate is commonly multiplied by the input noisy signal to generate channel dependent wind noise estimates in order to cope with interchannel wind-noise imbalance. Interchannel phase agreement by target signal dominance or incidentally equal wind-noise phase, which leads to underestimation, is offset by averaging channel dependent wind-noise estimates along frequency. Evaluation results show that the mean PESQ score by the proposed wind-noise suppressor reaches 2.1 which is 0.2 higher than that by the wind-noise suppressor without averaging and 0.3 higher than that by a conventional monaural-noise suppressor with a statistically significant difference.

This letter proposes a track before detect scheme embedded in coherent repeated interference with the aid of frequency diversity array. The unmatched properties between echo and interferences are firstly discussed from both signal processing and data processing standpoints. Afterward, the interference suppression algorithm with virtual channel weighting at continue sampling stage is proposed, followed with kinematics constraint correspondingly. Further, the evaluations of the interference suppression performance are carried out through simulations which illustrate the feasibility and validity of the proposed algorithm.