Extremely low-voltage charge pump (ELV-CP) and its dedicated multi-stage driver (MS-DRV) for sub-60-mV thermoelectric energy harvesting are proposed. The proposed MS-DRV utilizes the output voltages of each ELV-CP to efficiently boost the control clock signals. The boosted clock signals are used as switching signals for each ELV-CP and MS-DRV to turn switch transistors on and off. Moreover, reset transistors are added to the MS-DRV to ensure an adequate non-overlapping period between switching signals. Measurement results demonstrated that the proposed MS-DRV can generate boosted clock signals of 350 mV from input voltage of 60 mV. The ELV-CP can boost the input voltage of 100 mV with 10.7% peak efficiency. The proposed ELV-CP and MS-DRV can boost the low input voltage of 56 mV.

The rapid advancement of cloud-edge-end collaboration offers a feasible solution to realize low-delay and low-energy-consumption data processing for internet of things (IoT)-based smart distribution grid. The major concern of cloud-edge-end collaboration lies on resource management. However, the joint optimization of heterogeneous resources involves multiple timescales, and the optimization decisions of different timescales are intertwined. In addition, burst electromagnetic interference will affect the channel environment of the distribution grid, leading to inaccuracies in optimization decisions, which can result in negative influences such as slow convergence and strong fluctuations. Hence, we propose a cloud-edge-end collaborative multi-timescale multi-service resource management algorithm. Large-timescale device scheduling is optimized by sliding window pricing matching, which enables accurate matching estimation and effective conflict elimination. Small-timescale compression level selection and power control are jointly optimized by disturbance-robust upper confidence bound (UCB), which perceives the presence of electromagnetic interference and adjusts exploration tendency for convergence improvement. Simulation outcomes illustrate the excellent performance of the proposed algorithm.

Emerging data-intensive services in distribution grid impose requirements of high-concurrency access for massive internet of things (IoT) devices. However, the lack of effective high-concurrency access management results in severe performance degradation. To address this challenge, we propose a cloud-edge-device collaborative high-concurrency access management algorithm based on multi-timescale joint optimization of channel pre-allocation and load balancing degree. We formulate an optimization problem to minimize the weighted sum of edge-cloud load balancing degree and queuing delay under the constraint of access success rate. The problem is decomposed into a large-timescale channel pre-allocation subproblem solved by the device-edge collaborative access priority scoring mechanism, and a small-timescale data access control subproblem solved by the discounted empirical matching mechanism (DEM) with the perception of high-concurrency number and queue backlog. Particularly, information uncertainty caused by externalities is tackled by exploiting discounted empirical performance which accurately captures the performance influence of historical time points on present preference value. Simulation results demonstrate the effectiveness of the proposed algorithm in reducing edge-cloud load balancing degree and queuing delay.

Blockchain systems rely on peer-to-peer (P2P) overlay networks to propagate transactions and blocks. The node management of P2P networks affects the overall performance and reliability of the system. The traditional structure is based on random connectivity, which is known to be an inefficient operation. Therefore, we propose MSLT, a multiscale blockchain P2P network node management method to improve transaction performance. This approach involves configuring the network to operate at multiple scales, where blockchain nodes are grouped into different ranges at each scale. To minimize redundancy and manage traffic efficiently, neighboring nodes are selected from each range based on a predetermined set of rules. Additionally, a node updating method is implemented to improve the reliability of the network. Compared with existing transmission models in efficiency, utilization, and maximum transaction throughput, the MSLT node management model improves the data transmission performance.

Network function virtualization (NFV) technology significantly changes the traditional communication network environments by providing network functions as virtual network functions (VNFs) on commercial off-the-shelf (COTS) servers. Moreover, for using VNFs in a pre-determined sequence to provide each network service, service chaining is essential. A VNF can provide multiple service chains with the corresponding network function, reducing the number of VNFs. However, VNFs might be the source or the target of a cyberattack. If the node where the VNF is installed is attacked, the VNF would also be easily attacked because of its security vulnerabilities. Contrarily, a malicious VNF may attack the node where it is installed, and other VNFs installed on the node may also be attacked. Few studies have been done on the security of VNFs and nodes for service chaining. This study proposes a service chain construction with security-level management. The security-level management concept is introduced to built many service chains. Moreover, the cost optimization problem for service chaining is formulated and the heuristic algorithm is proposed. We demonstrate the effectiveness of the proposed method under certain network topologies using numerical examples.

Energy management in buildings is vital for reducing electricity costs and maximizing the comfort of occupants. Excess solar generation can be used by combining a battery storage system and a heating, ventilation, and air-conditioning (HVAC) system so that occupants feel comfortable. Despite several studies on the scheduling of appliances, batteries, and HVAC, comprehensive and time scalable approaches are required that integrate such predictive information as renewable generation and thermal comfort. In this paper, we propose an thermal-comfort aware online co-scheduling framework that incorporates optimal energy scheduling and a prediction model of PV generation and thermal comfort with the model predictive control (MPC) approach. We introduce a photovoltaic (PV) energy nowcasting and thermal-comfort-estimation model that provides useful information for optimization. The energy management problem is formulated as three coordinated optimization problems that cover fast and slow time-scales by considering predicted information. This approach reduces the time complexity without a significant negative impact on the result's global nature and its quality. Experimental results show that our proposed framework achieves optimal energy management that takes into account the trade-off between electricity expenses and thermal comfort. Our sensitivity analysis indicates that introducing a battery significantly improves the trade-off relationship.

While the introduction of softwarelization technologies such as software-defined networking and network function virtualization transfers the main focus of network management from hardware to software, network operators still have to deal with various and numerous network and computing equipment located in network centers. Toward fully automated network management, we believe that a robotic approach will be essential, meaning that physical robots will handle network-facility management works on behalf of humans. This paper focuses on robotic assistance for on-site network maintenance works. Currently, for many network operators, some network maintenance works (e.g., hardware check, hardware installation/replacement, high-impact update of software, etc.) are outsourced to computing and network vendors. Attendance (witness work) at the on-site vendor's works is one of the major tasks of network operators. Network operators confirm the work progress for human error prevention and safety improvement. In order to reduce the burden of this, we propose three essential works of robots, namely delegated attendance at on-site meetings, progress check by periodical patrol, and remote monitoring, which support the various forms of attendance. The paper presents our implementation of enabling these forms of support, and reports the results of experiments conducted in a commercial network center.

Design of distributed energy management systems composed of several agents such as factories and buildings is important for realizing smart cities. In addition, demand response for saving the power consumption is also important. In this paper, we propose a design method of distributed energy management systems with real-time demand response, in which both electrical energy and thermal energy are considered. Here, we use ADMM (Alternating Direction Method of Multipliers), which is well known as one of the powerful methods in distributed optimization. In the proposed method, demand response is performed in real-time, based on the difference between the planned demand and the actual value. Furthermore, utilizing a blockchain is also discussed. The effectiveness of the proposed method is presented by a numerical example. The importance of introducing a blockchain is pointed out by presenting the adverse effect of tampering the actual value.

For many countries in the world, 5G is of strategic significance. In the 5G era, telecom operators are expected to enable and provide multiple services with different communication characteristics like enhanced broadband, ultra-reliable and extreme real-time communications at the same time. To meet the requirements, the 5G network essentially will be more complex compared with traditional 3G/4G networks. The unique characteristics of 5G resulted from new technologies bring a lot of opportunities as well as significant challenges. In this paper we first introduce 5G vision and check the global status. And then we illustrate the 5G technical essentials and point out the new opportunities that 5G will bring to us. We also highlight the coming challenges and share our 5G experience and solutions toward 5G vision in many aspects, including network, management and business.

Recently, the adoption of the industrial Internet of things (IIoT) has optimized many industrial sectors and promoted industry “smartization.” Smart factories and smart industries connect the real and virtual worlds through cyber-physical systems (CPS). However, these linkages will increase the cyber security danger surface to new levels, putting millions of dollars' worth of assets at risk if communications in big network systems like IIoT settings are left unsecured. To solve these problems, the fundamental method is security, such as authentication and confidentiality, and it should require the encryption key. However, it is challenging the security performance with the limited performance of the sensor. Blockchain-based identity management is emerging for lightweight, integrity and persistence. However, the key generation and management issues of blockchain face the same security performance issues. First, through blockchain smart contracts and hierarchical deterministic (HD) wallets, hierarchical key derivation efficiently distributes and manages keys by line and group in the IIoT environment. Second, the pairing verification value based on an elliptic curve single point called Root Signature performs efficient public key certificate registration and verification and improves the key storage space. Third, the identity log recorded through the blockchain is the global transparency of the key lifecycle, providing system reliability from various security attacks. Keyless Signature Infrastructure (KSI) is adopted to perform efficiently via hash-based scheme (hash calendar, hash tree etc.). We analyze our framework compared to hash-based state commitment methods. Accordingly, our method achieves a calculation efficiency of O(nlog N) and a storage space saving of 60% compared to the existing schemes.

We propose a penalty-based and constraint Bayesian optimization methods with an agent-based supply-chain (SC) simulator as a new Monte Carlo optimization approach for multi-echelon inventory management to improve key performance indicators such as inventory cost and sales opportunity loss. First, we formulate the multi-echelon inventory problem and introduce an agent-based SC simulator architecture for the optimization. Second, we define the optimization framework for the formulation. Finally, we discuss the evaluation of the effectiveness of the proposed methods by benchmarking it against the most commonly used genetic algorithm (GA) in simulation-based inventory optimization. Our results indicate that the constraint Bayesian optimization can minimize SC inventory cost with lower sales opportunity loss rates and converge to the optimal solution 22 times faster than GA in the best case.

The unit commitment problem (UCP) is the problem of deciding up/down and generation-level patterns of energy production units. Due to the expansion of distributed energy resources and the liberalization of energy trading in recent years, solving the distributed UCP (DUCP) is attracting the attention of researchers. Once an up/down pattern is determined, the generation-level pattern can be decided distributively using the alternating direction method of multipliers (ADMM). However, ADMM does not guarantee convergence when deciding both up/down and generation-level patterns. In this paper, we propose a method to solve the DUCP using ADMM and constraint optimization programming. Numerical experiments show the efficacy of the proposed method.

To safeguard critical services and assets in a distributed environment, collaborative intrusion detection systems (CIDSs) are usually adopted to share necessary data and information among various nodes, and enhance the detection capability. For simplifying the network management, software defined networking (SDN) is an emerging platform that decouples the controller plane from the data plane. Intuitively, SDN can help lighten the management complexity in CIDSs, and a CIDS can protect the security of SDN. In practical implementation, trust management is an important approach to help identify insider attacks (or malicious nodes) in CIDSs, but the challenge is how to ensure the data integrity when evaluating the reputation of a node. Motivated by the recent development of blockchain technology, in this work, we design BlockCSDN — a framework of blockchain-based collaborative intrusion detection in SDN, and take the challenge-based CIDS as a study. The experimental results under both external and internal attacks indicate that using blockchain technology can benefit the robustness and security of CIDSs and SDN.

A private decentralized e-health environment, empowered by blockchain technology, grants authorized healthcare entities to legitimately access the patient's medical data without relying on a centralized node. Every activity from authorized entities is recorded immutably in the blockchain transactions. In terms of privacy, the e-health system preserves a default privacy option as an initial state for every patient since the patients may frequently customize their medical data over time for several purposes. Moreover, adjustments in the patient's privacy contexts are often solely from the patient's initiative without any doctor or stakeholders' recommendation. Therefore, we design, implement, and evaluate user-defined data privacy utilizing nudge theory for decentralized e-health systems named PDPM to tackle these issues. Patients can determine the privacy of their medical records to be closed to certain parties. Data privacy management is dynamic, which can be executed on the blockchain via the smart contract feature. Tamper-proof user-defined data privacy can resolve the dispute between the e-health entities related to privacy management and adjustments. In short, the authorized entities cannot deny any changes since every activity is recorded in the ledgers. Meanwhile, the nudge theory technique supports providing the best patient privacy recommendations based on their behaviour activities even though the final decision rests on the patient. Finally, we demonstrate how to use PDPM to realize user-defined data privacy management in decentralized e-health environments.

With multiple network interfaces are being widely equipped in modern mobile devices, the Multipath TCP (MPTCP) is increasingly becoming the preferred transport technique since it can uses multiple network interfaces simultaneously to spread the data across multiple network paths for throughput improvement. However, the MPTCP performance can be seriously affected by the use of a poor-performing path in multipath transmission, especially in the presence of network attacks, in which an MPTCP path would abrupt and frequent become underperforming caused by attacks. In this paper, we propose a multi-expert Learning-based MPTCP variant, called MPTCP-meLearning, to enhance MPTCP performance robustness against network attacks. MPTCP-meLearning introduces a new kind of predictor to possibly achieve better quality prediction accuracy for each of multiple paths, by leveraging a group of representative formula-based predictors. MPTCP-meLearning includes a novel mechanism to intelligently manage multiple paths in order to possibly mitigate the out-of-order reception and receive buffer blocking problems. Experimental results demonstrate that MPTCP-meLearning can achieve better transmission performance and quality of service than the baseline MPTCP scheme.

Any Internet-connected device is vulnerable to being hacked and misused. Hackers can find vulnerable IoT devices, infect malicious codes, build massive IoT botnets, and remotely control IoT devices through C&C servers. Many studies have been attempted to apply various security features on IoT devices to prevent IoT devices from being exploited by attackers. However, unlike high-performance PCs, IoT devices are lightweight, low-power, and low-cost devices and have limitations on performance of processing and memory, making it difficult to install heavy security functions. Instead of access to applying security functions on IoT devices, Internet-wide scanning (e.g., Shodan) studies have been attempted to quickly discover and take security measures massive IoT devices with weak security. Over the Internet, scanning studies remotely also exist realistic limitations such as low accuracy in analyzing security vulnerabilities due to a lack of device information or filtered by network security devices. In this paper, we propose a system for remotely collecting information from Internet-connected devices and using scanning techniques to identify and manage vulnerability information from IoT devices. The proposed system improves the open-source Zmap engine to solve a realistic problem when attempting to scan through real Internet. As a result, performance measurements show equal or superior results compared to previous Shodan, Zmap-based scanning.

Home Energy Management Systems (HEMS) contain devices of multiple manufacturers. Also, a large number of groups of devices must be managed according to several clustering situations. Hence, since it is necessary to establish a common secret group key among group members, the group key management scheme of IEEE 802.21 is used. However, no security verification result by formal methods is known. In this paper, we give the first formal verification result of secrecy and authenticity of the group key management scheme of IEEE 802.21 against insider and outsider attacks using ProVerif, which is an automatic verification tool for cryptographic protocols. As a result, we clarify that a spoofing attack by an insider and a replay attack by an outsider are found for the basic scheme, but these attacks can be prevented by using the scheme with the digital signature option.

To achieve highly efficient spectrum usage, dynamic sharing of scarce spectrum resources has recently become the subject of intense discussion. The technologies of dynamic spectrum sharing (DSS) have already been adopted or are scheduled to be adopted in a number of countries, and Japan is no exception. The authors and organizations collaborating in the research and development project being undertaken in Japan have studied a novel DSS system positioned between the fifth-generation mobile communication system (5G system) and different incumbent radio systems. Our DSS system has three characteristics. (1) It detects dynamically unused sharable spectrums (USSs) of incumbent radio systems for the space axis by using novel propagation models and estimation of the transmitting location with radio sensor information. (2) It manages USSs for the time axis by interference calculation with propagation parameters, fair assignment and future usage of USSs. (3) It utilizes USSs for the spectrum axis by using methods that decrease interference for lower separation distances. In this paper, we present an overview and the technologies of our DSS system and its applications in Japan.

Recently, information centric network (ICN) has attracted attention because cached content delivery from router's cache storage improves quality of service (QoS) by reducing redundant traffic. Then, adaptive video streaming is applied to ICN to improve client's quality of experience (QoE). However, in the previous approaches for the cache control, the router implicitly caches the content requested by a user for the other users who may request the same content subsequently. As a result, these approaches are not able to use the cache effectively to improve client's QoE because the cached contents are not always requested by the other users. In addition, since the previous cache control does not consider network congestion state, the adaptive bitrate (ABR) algorithm works incorrectly and causes congestion, and then QoE degrades due to unnecessary congestion. In this paper, we propose an explicit cache placement notification for congestion-aware adaptive video streaming over ICN (CASwECPN) to mitigate congestion. CASwECPN encourages explicit feedback according to the congestion detection in the router on the communication path. While congestion is detected, the router caches the requested content to its cache storage and explicitly notifies the client that the requested content is cached (explicit cache placement and notification) to mitigate congestion quickly. Then the client retrieve the explicitly cached content in the router detecting congestion according to the general procedures of ICN. The simulation experiments show that CASwECPN improves both QoS and client's QoE in adaptive video streaming that adjusts the bitrate adaptively every video segment download. As a result, CASwECPN effectively uses router's cache storage as compared to the conventional cache control policies.

In this letter we analyze the economic worth of GPU on analytical processing of GPU-accelerated database management systems (DBMSes). To this end, we conducted rigorous experiments with TPC-H across three popular GPU DBMSes. Consequently, we show that co-processing with CPU and GPU in the GPU DBMSes was cost-effective despite exposed concerns.