Takuya NISHIMURA Mitsuhiro HANABE Masaki MIYAMOTO Taiichi OTSUJI Eiichi SANO
We analytically investigated the feasibility of multiplier operation in the terahertz range for our original plasmon resonant photomixer. The photomixer features two unique structures (doubly interdigitated gate gratings and a vertical cavity) for higher radiation efficiencies. Its total field emission properties are the result of a combination of plasmon excitation dynamics and electromagnetic field dynamics. The plasmon excitation formulated by the hydrodynamic equations exhibits fundamental and harmonic resonances whose intensities monotonically decrease with the number of harmonics due to the dispersive plasma damping factors. The electromagnetic dynamics, on the other hand, formulated by the Maxwell's equations, reflect material- and structure-dependent device parameters; the grating-bi-coupled plasmonic cavity together with the vertical cavity structures produce nonlinear field emission properties. This results in extraordinary field enhancement at distinct frequencies inconsistent with the plasmon resonances. The frequency-dependent FDTD (finite difference time domain method) Maxwell's simulation revealed that the field emission peak frequency shifted upward apart from the fundamental mode of plasmon resonant frequency and approached to its second harmonic frequency with increasing the electron density in the plasmon cavity. Calculated total field emission spectra indicated that highly dense 2D-plasmon conditions enable frequency-doubler operation in the terahertz range.
Yuji KASAI Kiyoshi MIYASHITA Hidenori SAKANASHI Eiichi TAKAHASHI Masaya IWATA Masahiro MURAKAWA Kiyoshi WATANABE Yukihiro UEDA Kaoru TAKASUKA Tetsuya HIGUCHI
This paper proposes the combination of adjustable architecture and parameter optimization software, employing a method based on artificial intelligence (AI), to realize an image rejection mixer (IRM) that can enhance its image rejection ratio within a short period of time. The main components of the IRM are 6 Gilbert-cell multipliers. The tail current of each multiplier is adjusted by the optimization software, and the gain and phase characteristics are optimized. This adjustment is conventionally extremely difficult because the 6 tail currents to be adjusted simultaneously are mutually interdependent. In order to execute this adjustment efficiently, we employed a Genetic Algorithm (GA) that is a robust search algorithm that can find optimal parameter settings in a short time. We have successfully developed an IRM chip that has a performance of 71 dB and is suitable for single-chip integration with WCDMA applications.
Takahiro TSUDA Haruyoshi YAMAMOTO Yoshinari KAMEDA Yuichi OHTA
Visualizing occluded objects is a useful applications of Mixed Reality (MR), which we call "see-through vision." For this application, it is important to display occluded objects in such a manner that they can be recognized intuitively by the user. Here, we evaluated four visualization methods for see-through vision that can aid the user to recognize occluded objects in outdoor scenes intuitively: "elimination of occluding objects," "ground grid," "overlaying model of occluding object," and "top-down view." As we used a new handheld MR device for outdoor see-through vision, we performed subjective experiments to determine the best combination of methods. The experimental results indicated that a combination of showing the ground grid, overlaying wireframe models of occluding objects, and top-down view to be optimal, while it was not necessary to display occluding objects for outdoor see-through vision with a handheld device, because users can see them with the naked eye.
Sheng-Che TSENG Chinchun MENG Yang-Han LI Guo-Wei HUANG
The port-to-port isolation of the micromixer is studied using three different p-type downconversion micromixers in 0.35-µm CMOS technology. Both the body effect and the well isolation influence the port-to-port isolation significantly. The body effect degrades the LO-to-IF isolation and also deteriorates the LO-to-RF isolation. Without the well isolation, the LO-to-RF isolation drops. However, the RF-to-IF isolation is independent of the body effect and well isolation. The p-type micromixer with a separate N-well and without body effect has the best port-to-port isolation properties; its LO-to-IF, LO-to-RF, and RF-to-IF isolations are -59 dB, -58 dB, and -30 dB, respectively.
Yu LIU Satoshi KOMATSU Masahiro FUJITA
Recently, system level design languages (SLDL), which can describe both hardware and software aspects of the design, are receiving attention. Mixed-signal extensions of SLDL enable current discrete-oriented SLDLs to describe and simulate not only digital systems but also digital-analog mixed-signal systems. The synchronization between discrete and continuous behaviors is widely regarded as a critical part in the extensions. In this paper, we present an event-driven synchronization mechanism for both timed and untimed system level designs through which discrete and continuous behaviors are synchronized via AD events and DA events. We also demonstrate how the synchronization mechanism can be incorporated into the kernel of SLDL, such as SpecC. In the extended kernel, a new simulation cycle, the AMS cycle, is introduced. Three case studies show that the extended SpecC-based system level design environment using our synchronization mechanism works well with timed/untimed mixed-signal system level description.
Mitsuhiro SHIMOZAWA Kenichi MAEDA Eiji TANIGUCHI Keiichi SADAHIRO Takayuki IKUSHIMA Tamotsu NISHINO Noriharu SUEMATSU Kenji ITOH Yoji ISOTA Tadashi TAKAGI
This paper presents an even harmonic quadrature mixer (EH-QMIX) with a simple filter configuration and an integrated LTCC module including LNAs, band rejection filters (BRFs), and the proposed EH-QMIX for W-CDMA direct conversion receiver (DCR). Since the DCR has no spurious responses, a BRF instead of a high-Q band pass filter can be applicable for eliminating undesired signals and it can be built in the LTCC substrates easily. As LO frequency is half of RF frequency in the EH-QMIX, diplexer can be composed of simple filters and it can be also integrated in the substrates. As a result, the whole RF circuits of the EH-DCR using a proposed EH-QMIX are integrated in the LTCC module and miniaturization of the receiver is achieved. Moreover, in order to suppress the degradation of the amplitude and the phase imbalances in the quadrature mixer caused by interferences of signals, RF characteristics of the circuits in the mixer such as reflection coefficients, isolations are discussed. A developed LTCC module shows good performances for W-CDMA direct conversion receiver.
A comparison of performances is made of three text-independent speaker identification methods based on dual Penalized Logistic Regression Machine (dPLRM), Support Vector Machine (SVM) and Gaussian Mixture Model (GMM) with experiments by 10 male speakers. The methods are compared for the speech data which were collected over the period of 13 months in 6 utterance-sessions of which the earlier 3 sessions were for obtaining training data of 12 seconds' utterances. Comparisons are made with the Mel-frequency cepstrum (MFC) data versus the log-power spectrum data and also with training data in a single session versus in plural ones. It is shown that dPLRM with the log-power spectrum data is competitive with SVM and GMM methods with MFC data, when trained for the combined data collected in the earlier three sessions. dPLRM outperforms GMM method especially as the amount of training data becomes smaller. Some of these findings have been already reported in [1]-[3].
A new approach used to formulate to mixed-path propagation of surface wave is presented based on two main ingredients: the decomposition of electromagnetic fields and the introduction of equivalent electric (magnetic) currents adopted for convenience. The present method can be extended to obtain the corresponding results for the arbitrary incident wave excitation.
Masanori TAKEDA Yoshinori UZAWA Akira KAWAKAMI Zhen WANG
This paper describes the first experimental results for a waveguide-type all-NbN superconductor-insulator-superconductor (SIS) heterodyne mixer on an MgO substrate designed to operate over the gap frequency of Nb. The mixer consists of an NbN/MgO/NbN junction, which has a length of one wavelength at 880 GHz as a tuning circuit, an NbN/MgO/NbN microstrip as a λ/4 impedance transformer, and an RF choke filter. The mixer chip was designed using a high-frequency-structure simulator. Its return-loss and embedding-impedance characteristics were examined using a 180-times-scaled mixer model. By optimizing the cutting and polishing processes for the MgO substrate, we were able to fabricate the mixer chip with an accuracy of less than 5 µm. We succeeded in mounting the chip on a mixer block and in estimating the receiver noise temperature. The uncorrected minimum double-sideband receiver noise temperature was 740 K at 824 GHz. A comparison of the receiver noise temperature in a quasi-optical SIS mixer fabricated on the same wafer as the waveguide mixer showed that input noise was the major contributor to receiver noise in the waveguide mixer.
Wenlei SHAN Shinichiro ASAYAMA Mamoru KAMIKURA Takashi NOGUCHI Shengcai SHI Yutaro SEKIMOTO
We report on the design and experimental results of a fix-tuned Superconductor-Insulator-Superconductor (SIS) mixer for Atacama Large Millimeter/submillimeter Array (ALMA) band 8 (385-500 GHz) receivers. Nb-based SIS junctions of a current density of 10 kA/cm2 and one micrometer size (fabricated with a two-step lift-off process) are employed to accomplish the ALMA receiver specification, which requires wide frequency coverage as well as low noise temperature. A parallel-connected twin-junction (PCTJ) is designed to resonate at the band center to tune out the junction geometric capacitance. A waveguide-microstrip probe is optimized to have nearly frequency-independent impedance at the probe's feed point, thereby making it easy to match the low-impedance PCTJ over a wide frequency band. The RF embedding impedance is retrieved by fitting the measured pumped I-V curves to confirm good matching between PCTJ and signal source. We demonstrate here a minimum double-sideband receiver noise temperature of 3 times of quantum limits for an intermediate-frequency range of 4-8 GHz. The mixers were measured in band 8 cartridge with a sideband separation scheme. Single-sideband receiver noise below ALMA specification was achieved over the whole band.
This paper introduces the concept of "revocable unlinkability" for unlinkable anonymous signatures and proposes a generalized scheme that modifies the signatures to include revocable unlinkability. Revocable unlinkability provides a condition in which multiple messages signed using an unlinkable anonymous signature are unlinkable for anyone except the unlinkability revocation manager. Noteworthy is that the identifier of the signer is kept secret from the manager. In addition, examples are presented in which the proposed scheme is applied to existing group/ring signatures. The proposed scheme employs a verifiable MIX-net to shuffle the identifiers of all potential signers, thus giving it the potential for wide application to unlinkable anonymous signatures.
Contribution of this paper is twofold: First we introduce weaknesses of two Mix-nets claimed to be robust in the literature. Since such flaws are due to their weak security definitions, we then present a stronger security definition by regarding a Mix-net as a batch decryption algorithm of a CCA secure public-key encryption scheme. We show two concrete attacks on the schemes proposed in [1] and [2]. The scheme in [1] loses anonymity in the presence of a malicious user even though all servers are honest. The scheme in [2] also loses anonymity through the collaboration of a malicious user and the first server. In the later case the user can identify the plaintext sent from the targeted user by invoking two mix sessions at the risk of the colluding server receiving an accusation. We also point out that in a certain case, anonymity is violated solely by the user without colluding to any server. Heuristic repairs are provided for both schemes.
Koji OTSUBO Tomoyuki AKIYAMA Haruhiko KUWATSUKA Nobuaki HATORI Hiroji EBE Mitsuru SUGAWARA
We demonstrate the C-band wavelength conversion unit having functions of automatic wavelength recognition, power equalization, and elimination of original signal and pumping light for the first time, which is based on four-wave mixing (FWM) in semiconductor optical amplifiers (SOA's). The constructed unit automatically detects signal wavelength, sweeps wavelength of a pumping light, and adjusts center wavelengths of band pass filters and gain values of erbium-doped fiber amplifiers (EDFA's), in order to convert the wavelength of the signal to the arbitrary wavelength we set, and eliminate the original signal and pumping light after conversion. Amplification of the signal, pumping, and wavelength-converted lights compensates the detuning dependence of conversion efficiency and its asymmetry in the quantum-well (QW) SOA, to keep the power of the wavelength-converted light constant within the whole C-band region. The switching time of wavelength conversion by the unit is about a second, which is dominated by mechanical movement of the tunable filters. Wavelength-converted 2.5 and 10 Gb/s NRZ signals show clear eye-openings when the detuning is positive (ωp > ωs), and a 2-ps pulse train is also successfully wavelength-converted. To overcome the problem of the asymmetric conversion efficiency in the QW-SOA, we adopted quantum-dot (QD) SOA's. Although the 1.5 µm QD-SOA still shows its asymmetry, which will be improved by optimization of quantum dot structure, wavelength conversion of a 160 Gb/s RZ signal is demonstrated by the QD-SOA's. More improvement of the performance of the wavelength conversion unit should be possible by making switching time faster and installing the optimized QD-SOA's.
Tuan-Anh PHAN Chang-Wan KIM Yun-A SHIM Sang-Gug LEE
This paper presents a frequency-controllable image rejection mixer in heterodyne architecture for 2 GHz applications based on TSMC 0.18 µm CMOS technology. The designed mixer uses a notch filter to suppress the image signal and allows precise tuning the image frequencies. An image rejection of 20-70 dB is obtained in a 200 MHz of bandwidth. The simulation results show single-side band (SSB) NF is improved 3.7 dB, the voltage conversion gain of 14.7 dB, improved by more than 4 dB. The circuit operates at the supply voltage of 1.8 V, and dissipates 11.34 mW.
Young-Kyun JANG Ji-Hoon KIM Hyung-Joun YOO
A reconfigurable CMOS mixer for multi-standard application is presented. The mixer can be tuned and adjusted to multi-frequency bands using a flexible matching network which is a kind of variable reactance transformer. The flexible matching network consists of a few switched inductors and capacitors. The mixer has acceptable conversion gain, IIP3 and NF. It operates with a return loss of less than -10 dB through 2-6 GHz except for a few narrow frequency bands.
Tuan-Anh PHAN Chang-Wan KIM Yun-A SHIM Sang-Gug LEE
This paper presents a high performance wideband CMOS direct down-conversion mixer for UWB based on 0.18 µm CMOS technology. The proposed mixer uses the current bleeding technique and an extra resonant inductor to improve the conversion gain, noise figure (NF) and linearity. Also, with an extra inductor and the careful choosing of transistor sizes, the mixer has a very low flicker noise. The shunt resistor matching is applied to have a 528 MHz bandwidth matching at 50 Ohm. The simulation results show the voltage conversion gain of 20.5 dB, the double-side band NF of 5.6 dB. Two-tone test result indicates 11.25 dBm of IIP3 and higher than 70 dBm of IIP2. The circuit operates at the supply voltage of 1.8 V, and dissipates 11.5 mW.
Shoko ARAKI Shoji MAKINO Robert AICHNER Tsuyoki NISHIKAWA Hiroshi SARUWATARI
We propose utilizing subband-based blind source separation (BSS) for convolutive mixtures of speech. This is motivated by the drawback of frequency-domain BSS, i.e., when a long frame with a fixed long frame-shift is used to cover reverberation, the number of samples in each frequency decreases and the separation performance is degraded. In subband BSS, (1) by using a moderate number of subbands, a sufficient number of samples can be held in each subband, and (2) by using FIR filters in each subband, we can manage long reverberation. We confirm that subband BSS achieves better performance than frequency-domain BSS. Moreover, subband BSS allows us to select a separation method suited to each subband. Using this advantage, we propose efficient separation procedures that consider the frequency characteristics of room reverberation and speech signals (3) by using longer unmixing filters in low frequency bands and (4) by adopting an overlap-blockshift in BSS's batch adaptation in low frequency bands. Consequently, frequency-dependent subband processing is successfully realized with the proposed subband BSS.
Kenji KAWAKAMI Hiroshi IKEMATSU Koichi MATSUO Naohisa UEHARA Moriyasu MIYAZAKI Tadashi TAKAGI
This paper describes a millimeter-wave pulse transmitter with a 38 GHz-band Voltage Controlled Oscillator (VCO) and a 77/38 GHz-band harmonic mixer. This harmonic mixer works as both of a pulse modulator and a multiplier. This configuration of the transmitter is very simple, and can be applied to high-speed pulse modulation like Ultra Wide Band. By using the harmonic mixer, furthermore, a fluctuation of the load impedance of the 38 GHz VCO can be reduced. Compared with the conventional configuration, the required amount of isolation between the VCO and the load has been able to be reduced by more than 30 dB as a result of the experiment in a millimeter-wave band.
The millimeter-wave (MMW) broadband mixers that are useful for measurement instruments to analyze MMW high data rate signals have been investigated. At first, we propose the specialized RF front-end for analyses of MMW high data rate signals. Next, the required specifications for the 1st mixers of the front-end are estimated, and the design, fabrication, and testing results of Q, V, and W-band monolithic broadband resistive mixers are described. The testing results are compared with performances of the diode mixer designed for V-band. It was found that the resistive mixers have very attractive performances of low conversion loss, good frequency flatness and high third order intercept point (IP3) with low Local (LO) oscillators power. The developed resistive mixers are suitable for the proposed MMW band measurement instruments.
Ken-ichi IWATA Yasutada OOHAMA
This paper clarifies a necessary condition and a sufficient condition for transmissibility for a given set of general sources and a given general broadcast channel. The approach is based on the information-spectrum methods introduced by Han and Verdu. Moreover, we consider the capacity region of the general broadcast channel with arbitrarily fixed error probabilities if we send independent private and common messages over the channel. Furthermore, we treat the capacity region for mixed broadcast channel.