The efficiency of generating four-wave mixing (FWM) from phase-modulated (PM) optical signal is studied. An analysis, that takes bit shifts occurring during fiber propagation due to group velocity differences into account, indicates that the FWM efficiency from PM signals is smaller than that from continuous waves in fiber transmission lines whose distance is longer than the walk-off length between transmitted optical signals.

In this letter, a flexible and compatible with fine resolution radar frequency measurement receiver is designed. The receiver is implemented on the platform of Virtex-5 Field Programmable Grid Array (FPGA) from Xilinx. The Digital Down Conversion (DDC) without mixer based on polyphase filter has been successfully introduced in this receiver to obtain lower speed data flow and better resolution. This receiver can adapt to more modulation types and higher density of pulse flow, up to 200000 pulses per second. The measurement results indicate that the receiver is capable of detecting radar pulse signal of 0.2us to 2.5ms width with a major frequency root mean square error (RMSE) within 0.44MHz. Moreover, the wider pulse width and the higher decimation rate of DDC result in better performance. This frequency measurement receiver has been successfully used in a spaceborne radar system.

In this paper, a surveillance system by multiple agents, which is called a multi-agent surveillance system, is studied. A surveillance area is given by an undirected connected graph. Then, the optimal control problem for multi-agent surveillance systems (the optimal surveillance problem) is to find trajectories of multiple agents that travel each node as evenly as possible. In our previous work, this problem is reduced to a mixed integer linear programming problem. However, the computation time for solving it exponentially grows with the number of agents. To overcome this technical issue, a new model predictive control method for multi-agent surveillance systems is proposed. First, a procedure of individual optimization, which is a kind of approximate solution methods, is proposed. Next, a method to improve the control performance is proposed. In addition, an event-triggering condition is also proposed. The effectiveness of the proposed method is presented by a numerical example.

We present a novel hybrid beamforming architecture for high speed 5G technologies. The architecture combines several new concepts to achieve significant hardware and cost reduction for large antenna arrays. Specifically, we employ an on-site code division multiplexing scheme to group several antenna elements into a single analog-to-digital converter (ADC). This approach significantly reduces analog hardware and power requirements by a factor of 8 to 32. Additionally, we employ a novel analog frequency independent beamforming scheme to eliminate phase shifters altogether and allow for coherent combining at the analog front-end. This approach avoids traditional phase-shifter-based approaches typically associated with bulky and inefficient components. Preliminary analysis shows that for an array of 800 elements, as much as 97% reduction in cost and power is achieved using the hybrid beamformer as compared to conventional beamformer systems.

A design method of the differential N-path filter with sampling computation is proposed. It enables the scale of the whole filter to be reduced by approximately half for easier realization. On top of that, the proposed method offers the ability to eliminate the harmonic passbands of the clock frequency and an increase of harmonic rejection. By using the proposed method, previous work involving an 8-path filter can be reduced to 5-path. The proposed differential 5-path filter reduces the scale of the circuit and at the same time has the performance of a 10-path filter from previous work. An example of differential 7-path filter using the same proposed design method is also stated in comparison of the differential 5-path filter. The differential 7-path filter offers the ability to eliminate all the passbands below 10 times the clock frequency with a tradeoff of an increase in circuit scale.

As real-time embedded systems are required to accommodate various tasks with different levels of criticality, scheduling algorithms for MC (Mixed-Criticality) systems have been widely studied in the real-time systems community. Most studies have focused on MC uniprocessor systems whereas there have been only a few studies to support MC multiprocessor systems. In particular, although the ZL (Zero-Laxity) policy has been known to an effective technique in improving the schedulability performance of base scheduling algorithms on SC (Single-Criticality) multiprocessor systems, the effectiveness of the ZL policy on MC multiprocessor systems has not been revealed to date. In this paper, we focus on realizing the potential of the ZL policy for MC multiprocessor systems, which is the first attempt. To this end, we design the ZL policy for MC multiprocessor systems, and apply the policy to EDF (Earliest Deadline First), yielding EDZL (Earliest Deadline first until Zero-Laxity) tailored for MC multiprocessor systems. Then, we develop a schedulability analysis for EDZL (as well as its base algorithm EDF) to support its timing guarantee. Our simulation results show a significant schedulability improvement of EDZL over EDF, demonstrating the effectiveness of the ZL policy for MC multiprocessor systems.

An equivalent circuit of Yee's cells is proposed for mixed electromagnetic and circuit simulations. Using the equivalent circuit, a mixed electromagnetic and circuit simulator can be developed, in which the electromagnetic field and circuit responses are simultaneously analyzed. Representing the electromagnetic system as a circuit, active and passive device models in a circuit simulator can be used for the mixed simulations without any modifications. Hence, the propose method is very useful for designing various electronic systems. To evaluate the mixed simulations with the equivalent circuit, two implementations with shared or distributed memory computer system are presented. In the numerical examples, we evaluate the performances of the prototype simulators to demonstrate the effectiveness.

The ultrasound image segmentation is a crucial task in many clinical applications. However, the ultrasound image is difficult to segment due to image inhomogeneity caused by the ultrasound imaging technique. In this paper, to deal with image inhomogeneity with considering ultrasound image properties the Local Rayleigh Distribution Fitting (LRDF) energy term is introduced into the traditional level set method newly. While the curve evolution equation is derived for energy minimization, and self-driven uterus contour is achieved on the ultrasound images. The experimental segmentation results on synthetic images and in-vivo ultrasound images present that the proposed approach is effective and accurate, with the Dice Score Coefficient (DSC) of 0.95 ± 0.02.

A frequently occurring subcircuit consists of a loop of a resistor (R), a field-effect transistor (FET), and a capacitor (C). The FET acts as a switch, controlled at its gate terminal by a clock voltage. This subcircuit may be acting as a sample-and-hold (S/H), as a passive mixer (P-M), or as a bandpass filter or bandpass impedance. In this work, we will present a useful analysis that leads to a simple signal flow graph (SFG), which captures the FET-R-C circuit's action completely across a wide range of design parameters. The SFG dissects the circuit into three filtering functions and ideal sampling. This greatly simplifies analysis of frequency response, noise, input impedance, and conversion gain, and leads to guidelines for optimum design. This paper focuses on the analysis of a single-path FET-R-C circuit's signal transfer characteristics including the reconstruction of the complete waveform from the discrete-time sampled voltage.

This paper presents low-noise amplifier (LNA)-less 300-GHz CMOS receivers that operate above the NMOS unity-power-gain frequency, fmax. The receivers consist of a down-conversion mixer with a doubler- or tripler-last multiplier chain that upconverts an LO1/n signal into 300 GHz. The conversion gain of the receiver with the doubler-last multiplier is -19.5 dB and its noise figure, 3-dB bandwidth, and power consumption are 27 dB, 27 GHz, and 0.65 W, respectively. The conversion gain of the receiver with the tripler-last multiplier is -18 dB and its noise figure, 3-dB bandwidth, and power consumption are 25.5 dB, 33 GHz, and 0.41 W, respectively. The receivers achieve a wireless data rate of 32 Gb/s with 16QAM. This shows the potential of the moderate-fmax CMOS technology for ultrahigh-speed THz wireless communications.

This paper proposes a novel domain adaptation method that can utilize out-of-domain text resources and partially domain matched text resources in language modeling. A major problem in domain adaptation is that it is hard to obtain adequate adaptation effects from out-of-domain text resources. To tackle the problem, our idea is to carry out model merger in a latent variable space created from latent words language models (LWLMs). The latent variables in the LWLMs are represented as specific words selected from the observed word space, so LWLMs can share a common latent variable space. It enables us to perform flexible mixture modeling with consideration of the latent variable space. This paper presents two types of mixture modeling, i.e., LWLM mixture models and LWLM cross-mixture models. The LWLM mixture models can perform a latent word space mixture modeling to mitigate domain mismatch problem. Furthermore, in the LWLM cross-mixture models, LMs which individually constructed from partially matched text resources are split into two element models, each of which can be subjected to mixture modeling. For the approaches, this paper also describes methods to optimize mixture weights using a validation data set. Experiments show that the mixture in latent word space can achieve performance improvements for both target domain and out-of-domain compared with that in observed word space.

Image boundary detection or image segmentation is an important step in image analysis. However, choosing appropriate parameters for boundary detection algorithms is necessary to achieve good boundary detection results. Image boundary detection fusion with unsupervised parameters can output a final consensus boundary, which is generally better than using unsupervised or supervised image boundary detection algorithms. In this study, we theoretically examine why image boundary detection fusion can work well and we propose a mixture model for image boundary detection fusion (MMIBDF) to achieve good consensus segmentation in an unsupervised manner. All of the segmentation algorithms are treated as new features and the segmentation results obtained by the algorithms are the values of the new features. The MMIBDF is designed to sample the boundary according to a discrete distribution. We present an inference method for MMIBDF and describe the corresponding algorithm in detail. Extensive empirical results demonstrate that MMIBDF significantly outperforms other image boundary detection fusion algorithms and the base image boundary detection algorithms according to most performance indices.

This paper proposes a scheme for automatic generation of mixed-integer programming problems for scheduling with multiple resources based on colored timed Petri nets. Our method reads Petri net data modeled by users, extracts the precedence and conflict relations among transitions, information on the available resources, and finally generates a mixed integer linear programming for exactly solving the target scheduling problem. The mathematical programing problems generated by our tool can be easily inputted to well-known optimizers. The results of this research can extend the usability of optimizers since our tool requires just simple rules of Petri nets but not deep mathematical knowledge.

Feature visualization is of great significances in volume visualization, and feature extraction has been becoming extremely popular in feature visualization. While precise definition of features is usually absent which makes the extraction difficult. This paper employs probability density function (PDF) as statistical property, and proposes a statistical property guided approach to extract features for volume data. Basing on feature matching, it combines simple liner iterative cluster (SLIC) with Gaussian mixture model (GMM), and could do extraction without accurate feature definition. Further, GMM is paired with a normality test to reduce time cost and storage requirement. We demonstrate its applicability and superiority by successfully applying it on homogeneous and non-homogeneous features.

The remaining issues in optical transmission technology are the degradation of optical signal to noise power ratio due to amplifier noise and the distortions due to optical nonlinear effects in a fiber. Therefore in addition to the Shannon limit, practical channel capacity is believed to be restricted by the nonlinear Shannon limit. The nonlinear Shannon limit has been derived under the assumption that the received signal points on the constellation map deviated by optical amplifier noise and nonlinear interference noise are symmetrically distributed around the ideal signal point and the sum of the noises are regarded as white Gaussian noise. The nonlinear Shannon limit is considered as a kind of theoretical limitation. However it is doubtful that its derivation process and applicable range have been understood well. In this paper, some fundamental papers on the nonlinear Shannon limit are reviewed to better understanding its meaning and applicable range.

Multi-camera videos with abundant information and high flexibility are useful in a wide range of applications, such as surveillance systems, web lectures, news broadcasting, concerts and sports viewing. Viewers can enjoy an enhanced viewing experience by choosing their own viewpoint through viewing interfaces. However, some viewers may feel annoyed by the need for continual manual viewpoint selection, especially when the number of selectable viewpoints is relatively large. In order to solve this issue, we propose an automatic viewpoint navigation method designed especially for sports. This method focuses on a viewer's personal preference for viewpoint selection, instead of common and professional editing rules. We assume that different trajectory distributions of viewing objects cause a difference in the viewpoint selection according to personal preference. We learn the relationship between the viewer's personal viewpoint-selection tendency and the spatio-temporal game context represented by the objects trajectories. We compare three methods based on Gaussian mixture model, SVM with a general histogram and SVM with a bag-of-words to seek the best learning scheme for this relationship. The performance of the proposed methods are evaluated by assessing the degree of similarity between the selected viewpoints and the viewers' edited records.

In statistical approaches such as statistical static timing analysis, the distribution of the maximum of plural distributions is computed by repeating a maximum operation of two distributions. Moreover, since each distribution is represented by a linear combination of several explanatory random variables so as to handle correlations efficiently, sensitivity of the maximum of two distributions to each explanatory random variable, that is, covariance between the maximum and an explanatory random variable, must be calculated in every maximum operation. Since distribution of the maximum of two Gaussian distributions is not a Gaussian, Gaussian mixture model is used for representing a distribution. However, if Gaussian mixture models are used, then it is not always possible to make both variance and covariance of the maximum correct simultaneously. We propose a new algorithm to determine covariance without deteriorating the accuracy of variance of the maximum, and show experimental results to evaluate its performance.

Mixed noise removal is a major problem in image processing. Different noises have different properties and it is required to use an appropriate removal method for each noise. Therefore, removal of mixed noise needs the combination of removal algorithms for each contained noise. We aim at the removal of the mixed noise composed of Additive White Gaussian Noise (AWGN) and Random-Valued Impulse Noise (RVIN). Many conventional methods cannot remove the mixed noise effectively and may lose image details. In this paper, we propose a new mixed noise removal method utilizing Direction Weighted Median filter (DWM filter) and Block Matching and 3D filtering method (BM3D). Although the combination of the DWM filter for RVIN and BM3D for AWGN removes almost all the mixed noise, it still loses some image details. We find the cause in the miss-detection of the image details as RVIN and solve the problem by re-detection with the difference of an input noisy image and the output by the combination. The re-detection process removes only salient noise which BM3D cannot remove and therefore preserves image details. These processes lead to the high performance removal of the mixed noise while preserving image details. Experimental results show our method obtains denoised images with clearer edges and textures than conventional methods.

Free-space optical (FSO) communication, which offers better data rate at a lower cost compared to radio-frequency (RF) backhauls, and is much easier to setup and maintain than optical cables, is gaining attention as an attractive substitute. Average capacity is one of the main performances metrics to understand the connectivity and data rates of a communication system but the performance analysis for mixed RF/FSO link is not straightforward as the RF link and the FSO link experiences different atmospheric perturbations. In this paper, we have investigated the ergodic capacity of a dual-hop mixed RF/FSO communication system realized with an average power scaling (APS) based amplify and forward (AF) relay. Assuming moderate to strong atmospheric turbulence, the FSO link is modeled by gamma-gamma distribution while it is assumed that the RF link experiences multipath Rayleigh fading. Simple analytical methods have been devised for obtaining concise closed-form expressions for ergodic capacity under four different rate/ power adaptation policies and are validated through extensive Monte Carlo simulations.

Color transfer is a simple process to change a color tone in one image (source) to look like another image (target). In transferring colors between images, there are several issues needed to be considered including partial color transfer, trial-and-error, and multiple target color transfer. Our approach enables users to transfer colors partially and locally by letting users select their regions of interest from image segmentation. Since there are many ways that we can transfer colors from a set of target regions to a set of source regions, we introduce the region exploration and navigation approach where users can choose their preferred color tones to transfer one region at a time and gradually customize towards their desired results. The preferred color tones sometimes can come from more than one image; therefore our method is extended to allow users to select their preferred color tones from multiple images. Our experimental results have shown the flexibility of our approach to generate reasonable segmented regions of interest and to enable users to explore the possible results more conveniently.