This paper proposes an improved discrete Fourier transform (DFT)-based channel estimation technique for time domain synchronous orthogonal frequency division multiplexing (TDS-OFDM) communication systems. The proposed technique, based on the concept of significant channel tap detector (SCTD) scheme, can effectively improve the system performance of TDS-OFDM systems. The correlation of two successive preambles is employed to estimate the average noise power as the threshold for obtaining the SCTD threshold estimation error and loss path information in large delay spread channel environments. The proposed estimation scheme roughly predicts the noise power in order to choose the significant channel taps to estimate the channel impulse response. Some comparative simulations are given to show that the proposed technique has the potential to achieve bit error rate performance superior to that of the conventional least squares channel estimation.

A chip is described that integrates two multimedia VLIW processor cores with a hardware streaming engine. It can implement a real-time videophone, or an MPEG4 codec. Each processor core has identical resources, and shares the memory and system I/O interface units. With its symmetric structure, applications can be executed on either processor without constraints. To accelerate multimedia-specific applications, the architecture of this processor has several features. It merges the features of a RISC and a DSP, its instruction set is extended to accelerate both video and audio applications, and it supports an efficient embedded memory system, to reduce both the bandwidth and the latency for multimedia applications needing frequent memory accesses. The chip size will be 100 mm2 die that contains 700 K logic gates, 60 KB RAM, and 16 KB ROM, in a 0.25-µm CMOS standard cell technology. At 65 MHz operating frequency, it can process H.263 video coding at CIF 15 frames/sec, and G.723.1 audio coding with an 80% processing time allocation.

In the topologies for interconnected nodes, it is desirable to have a low degree and a small diameter. For the same number of nodes, a dual-cube topology has almost half the degree compared to a hypercube while increasing the diameter by just one. Hence, it is a promising topology for interconnection networks of massively parallel systems. We propose here a stochastic fault-tolerant routing algorithm to find a non-faulty path from a source node to a destination node in a dual-cube.

Negative Bias Temperature Instability (NBTI) is one of the serious concerns for long-term circuit performance degradation. NBTI degrades PMOS transistors under negative bias, whereas they recover once negative bias is removed. In this paper, we propose a mitigation method for NBTI-induced performance degradation that exploits the recovery property by shifting random input sequence through scan paths. With this method, we prevent consecutive stress that causes large degradation. Experimental results reveal that random scan-in vectors successfully mitigate NBTI and the path delay degradation is reduced by 71% in a test case when standby mode occupies 10% of total time. We also confirmed that 8-bit LFSR is capable of random number generation for this purpose with low area and power overhead.

This paper presents a 27.5-29.6GHz fractional-N frequency synthesizer using reference and frequency doublers to achieve low in-band and out-of-band phase-noise for 5G mobile communications. A consideration of the baseband carrier recovery circuit helps estimate phase noise requirement for high modulation scheme. The push-push amplifier and 28GHz balun help achieving differential signals with low out-of-band phase noise while consuming low power. A charge pump with gated offset as well as reference doubler help reducing PD noise resulting in low in-band phase noise while sampling loop filter helps reduce spurs. The proposed synthesizer has been implemented in 65nm CMOS technology achieving an in-band and out-of-band phase noise of -78dBc/Hz and -126dBc/Hz, respectively. It consumes only a total power of 33mW. The jitter-power figure-of-merit (FOM) is -231dB which is the highest among the state of the art >20GHz fractional-N PLLs using a low reference clock (<200MHz). The measured reference spurs are less than -80dBc.

To analyze the saturation performance of IEEE 802.11 DCF, several discrete-time Markov chain models for a station and sets of channel equations have been introduced. We take into account a frame retry limit, freezing of backoff counter, and the dependence of backoff procedure on the previous channel status all together. Our method is simple even though it is accurate under the assumption of no consecutive transmissions over the shared channel.

This paper describes a study to determine if a current-mode circuit is useful as an analog circuit technique for realizing submicron mixed analog-and-digital MOS LSIs. To examine this, we designed and circuit simulated a new current-mode ADC bit-block for a 3 V, 10-bit level, 20 MHz ADC with a pipeline architecture and with full current-mode approach. A new precision current-mode sample-and-hold circuit which enables operation of a bit block at a clock speed of 20 MHz was developed. Current mismatches caused by the poor output impedance of a device were also decreased by adopting a cascode configuration throughout the design. Operation with a 3 V power supply and a 20 MHz clock speed in a 3-bit A/D configuration was verified through circuit simulation using standard CMOS 0.6 µm device parameters. Gain error, mismatch of current, and linearity of the bit block with changing threshold voltage of a device were carefully examined. The bit block has a gain error of 0.2% (10-bit level), a linearity error of less than 0.1% (more than 10-bit level), and a current mismatch of DAC current sources in a bit cell of 0.2 to 0.4% (more than 8-bit level) with a 3 V power supply and 20 MHz clock speed. An 8-to 9-bit video-speed pipeline ADC can be realized without calibration. This confirms that the current-mode approach is effective.

An application of wavelength conversion laser diodes (WCLDs) to a photonic cross-connect system using wavelength-division (WD) technology is presented. We propose a novel WD photonic cross-connect node architecture with multiwavelength selective filters. By using the filters, we can construct a nonblocking cross-connect switch by 2-stage connection. Next we describe the requirements to the optical devices in our switch, especially to the wavelength conversion devices in configuring a multistage connection of our switch. Finally, we have conducted the wavelength switching experiments using our wavelength conversion laser diode at a bit rate of 125Mb/s and shown its applicability to a WD photonic cross-connect system with over 3,000 channels.

A frame-installed lightwave synthesizer is constructed for optical frequency-division-multiplexing (FDM) communication. The synthesizer consists of two DFB diode lasers, electrical feedback loops, and an HCN gas cell used as a frequency reference at v0=192,843GHz (1.55459µm in wave-length). Output frequency can be stabilized at anywhere within v0(220) GHz. The beat note observed between the synthesizer and another HCN-stabilized DFB laser is constant within 2MHz over 100 hours. Frequency stability better than 410-10 (80kHz, without normalization) is obtained for an averaging time of 200s.

In multicarrier code division multiple access (MC-CDMA) systems, the orthogonality among the spreading codes is destroyed because the channels exhibit frequency-selective fading and the despreading stage performs gain control; that is, inter-code interference (ICI) can significantly degrade system performance. This paper proposes an optimum spreading code assignment method that reflects our analysis of ICI for up and downlink MC-CDMA cellular systems over correlated frequency-selective Rayleigh fading channels. At first, we derive theoretical expressions for the desired-to-undesired signal power ratio (DUR) as a quantitative representation of ICI; computer simulation results demonstrate the validity of the analytical results. Next, based on the ICI imbalance among code pairs, we assign specific spreading codes to users to minimize ICI (in short, to maximize the multiplexing performance); our proposed method considers the quality of service (QoS) policy of users or operators. We show that the proposed method yields better performance, in terms of DUR, than the conventional methods. The proposed method can maximize the multiplexing performance of a MC-CDMA cellular system once the channel model, spreading sequence, and combining strategy have been set. Three combining strategies are examined at the despreading stage for the uplink, equal gain combining (EGC), orthogonality restoring combining (ORC), and maximum ratio combining (MRC), while two are considered for the downlink, EGC and MRC.

Existing anomaly intrusion detection that monitors system calls has two problems: vast false positives and lack of risk information on detection. In order to solve the two problems, we propose an intrusion detection method called "Callchains." Callchains reduces the false positives of existing anomaly intrusion detection by restricting monitoring to the activities with process capabilities prescribed by POSIX 1003.1e. Additionally, Callchains provides an administrator information of used POSIX capabilities in sytem call execution as an indicator of risk. This paper shows Callchains' design, its implementation, and experimental results comparing Callchains with existing approaches.

Homomorphic encryption (HE) is useful to analyze encrypted data without decrypting it. However, by using ordinary HE, a user who can decrypt a ciphertext that is generated by executing homomorphic operations, can also decrypt ciphertexts on which homomorphic evaluations have not been performed, since homomorphic operations cannot be executed among ciphertexts which are encrypted under different public keys. To resolve the above problem, we introduce a new cryptographic primitive called Homomorphic Proxy Re-Encryption (HPRE) combining the “key-switching” property of Proxy Re-Encryption (PRE) and the homomorphic property of HE. In our HPRE, original ciphertexts (which have not been re-encrypted) guarantee CCA2 security (and in particular satisfy non-malleability). On the other hand, re-encrypted ciphertexts only guarantee CPA security, so that homomorphic operations can be performed on them. We define the functional/security requirements of HPRE, and then propose a specific construction supporting the group operation (over the target group in bilinear groups) based on the PRE scheme by Libert and Vergnaud (PKC 2008) and the CCA secure public key encryption scheme by Lai et al. (CT-RSA 2010), and prove its security in the standard model. Additionally, we show two extensions of our HPRE scheme for the group operation: an HPRE scheme for addition and an HPRE scheme for degree-2 polynomials (in which the number of degree-2 terms is constant), by using the technique of the recent work by Catalano and Fiore (ACMCCS 2015).

Many handover techniques in the Internet have been introduced with the development of mobile computing technologies. Although many proposed handover schemes utilize multiple wireless interfaces, having multiple wireless interfaces in a mobile device increases its power consumption, device installation space, and hardware costs. We have been studying handover schemes for mobile nodes with a single wireless interface. To achieve seamless and efficient handover, we focus on Stream Control Transmission Protocol (SCTP) that offers a message-oriented, reliable and connection-oriented delivery transport service. Unlike other transport protocols like TCP, SCTP can provide an end-to-end handover mechanism with multi-homing feature. However, the handover mechanism in the current SCTP causes large handover latency particularly when a mobile node has only one single wireless interface. This paper investigates the current issues of the SCTP handover mechanism, and proposes a new efficient handover scheme based on SCTP, which identifies a communication path as a pair of source and destination address. Additionally, we modified SCTP behavior when an SCTP endpoint received a SET PRIMARY message to change primary destination of peer endpoint. This paper shows that our scheme can reduce the handover latency by two to thirty seconds.

This paper proposes a new design criterion of adaptively scaled belief (ASB) in Gaussian belief propagation (GaBP) for large multi-user multi-input multi-output (MU-MIMO) detection. In practical MU detection (MUD) scenarios, the most vital issue for improving the convergence property of GaBP iterative detection is how to deal with belief outliers in each iteration. Such outliers are caused by modeling errors due to the fact that the law of large number does not work well when it is difficult to satisfy the large system limit. One of the simplest ways to mitigate the harmful impact of outliers is belief scaling. A typical approach for determining the scaling parameter for the belief is to create a look-up table (LUT) based on the received signal-to-noise ratio (SNR) through computer simulations. However, the instantaneous SNR differs among beliefs because the MIMO channels in the MUD problem are random; hence, the creation of LUT is infeasible. To stabilize the dynamics of the random MIMO channels, we propose a new transmission block based criterion that adapts belief scaling to the instantaneous channel state. Finally, we verify the validity of ASB in terms of the suppression of the bit error rate (BER) floor.

In this paper, we propose an OFDM scheme with pre-IDFT/DFT and the frequency domain equalization on frequency-selective Rayleigh fading channels. In this scheme, a two-dimensional block interleaving is used to randomize the correlated noise caused by the frequency domain linear equalizer. Then, the pre-DFT averages the interleaved noise enhancement and improves the error performance of the proposed scheme. Computer simulations confirm the bit error probability of the proposed scheme for multilevel modulations.

In this paper, we present a noble pattern synthesis method of linear and planar array antennas, with non-uniform spacing, for simultaneous reduction of their side-lobe level and pattern distortion during beam steering. In the case of linear array, the Gauss-Newton method is applied to adjust the positions of elements, providing an optimal linear array in the sense of side-lobe level and pattern distortion. In the case of planar array, the concept of thinned array combined with non-uniformly spaced array is applied to obtain an optimal two dimensional (2-D) planar array structure under some constraints. The optimized non-uniformly spaced linear array is extended to the 2-D planar array structure, and it is used as an initial planar array geometry. Next, we further modify the initial 2-D planar array geometry with the aid of thinned array theory in order to reduce the maximum side-lobe level. This is implemented by a genetic algorithm under some constraints, minimizing the maximum side-lobe level of the 2-D planar array. It is shown that the proposed method can significantly reduce the pattern distortion as well as the side-lobe level, although the beam direction is scanned.

Wireless sensor networks represent a new data collection paradigm in which expandability plays an important role. In a practical monitoring environment, for example, food factory monitoring system, sensor relocations and reorganizations are necessary with reorganization of production lines and starting of new production lines. These relocations sometime make congestion in some area of the network. In this dynamic changing environment online expansion is a challenging problem for resource constraint network. This paper proposes a two-tier autonomous decentralized community architecture for wireless sensor network to solve the problem. The first layer consists of sensors and second layer consists of routers. In the architecture routers make community (a group of nodes mutually cooperate for a common goal is a community). The goal of this paper is to introduce the concept of sharing information among routers of the community to decrease sensor connection time for the network especially for the dynamic changing environment. Results show that our proposed technologies can reduce sensor connection time to achieve online expansion.

The uplink of a space-time block coded multicarrier modulation code division multiple access (MC-CDMA) system equipped with a uniform linear array (ULA) at the base station is studied. A blind decoder that provides closed-form solutions of both transmitted symbol sequences and directions of arrival (DOAs) for all active users in one macrocell is derived without the uplink space-time vector channel estimation. The decoder uses an ESPRIT-like method to separate multiple co-channel users with different impinging DOAs. As a result, the DOAs of multiple users are obtained. In particular, a set of signal spaces, every one of which is spanned by the coded symbol sequences of an individual user, are also obtained. From these signal spaces, the original symbol sequences of multiple users are estimated by exploiting the special structure of space-time block coding (STBC) in combination with the finite alphabet property of transmitted symbols. Performance of the proposed scheme is evaluated by extensive computer simulations.

Polynomial cancellation coding (PCC) was proposed to mitigate the sever inter-carrier-interference (ICI) in an orthogonal frequency division multiplexing (OFDM) system caused by frequency offset. In this paper, we consider the effectiveness of PCC under time-variant multi-path Rayleigh fading analytically and by simulations. We first consider an analytical expression of the signal-to-interference plus noise power ratio (SINR) and then derive an approximation of the bit-error-rate (BER) of the OFDM-PCC system under the assumption that ICI is well approximated by a white Gaussian noise. Since the bandwidth efficiency of OFDM-PCC is half of that of normal OFDM, we compare the BER performance of the scheme with the normal OFDM system of the same bit-rate when low, medium, and high level modulations are used. Our results show that OFDM-PCC performs well even for high modulation level under time-varying multi-path fading.

In this letter a new method for controlling chaos is proposed. Although different several methods based on the OGY- and the OPF-method perturb a value of an accessible system parameter, the proposed method perturbs the only timing of switching three values of a parameter. We apply the proposed method to the well-known Chua's circuit on computer simulations. The chaotic orbits in the Rössler type- and the double scroll type-attractor can be stabilized on several unstable periodic orbits embedded within these attractors.