Touch screen has become the mainstream manipulation technique on handheld devices. However, its innate limitations, e.g. the occlusion problem and fat finger problem, lower user experience in many use scenarios on handheld displays. Back-of-device interaction, which makes use of input units on the rear of a device for interaction, is one of the most promising approaches to address the above problems. In this paper, we present the findings of a user study in which we explored users' pointing performances in using two types of touch input on handheld devices. The results indicate that front-of-device touch input is averagely about two times as fast as back-of-device touch input but with higher error rates especially in acquiring the narrower targets. Based on the results of our study, we argue that in the premise of keeping the functionalities and layouts of current mainstream user interfaces back-of-device touch input should be treated as a supplement to front-of-device touch input rather than a replacement.

Rate control that is required to regulate the bitrate of video coding is critical to time-sensitive video applications used over networks. However, the H.264/AVC standard does not respond to scene changes, and this causes the transmission quality to deteriorate as a scene change occurs. In this work, a scene change is detected by comparing the ratio of the sum of absolute difference (SAD) between two consecutive frames. As the scene change is detected, the proposed method, which is modified from the reference software of H.264/AVC, re-assigns a quantization parameter (QP) value to regulate the bitrate. Because the inter-prediction works poorly for the scene-changed frame, the proposed method estimates its frame complexity based on the content, and further creates another Q-R model to assign QP. The adaptive rate control mechanism presented in this study can quickly respond to the heavy bitrate increment caused by a change of scene. Simulation results show that the proposed method improves the average peak signal noise ratio (PSNR) to approximately 1.1dB, with a smaller buffer size compared with the performance of the reference software JM version 17.2.

A distributed computing system consists of processing elements, communication links, memory units, data files, and programs. These resources are interconnected via a communication network and controlled by a distributed operating system. The distributed program reliability (DPR) in a distributed computing system is the probability that a program which runs on multiple processing elements and needs to retrieve data files from other processing elements will be executed successfully. This reliability varies according to 1) the topology of the distributed computing system, 2) the reliability of the communication edges, 3) the data files and programs distribution among processing elements, and 4) the data files required to execute a program. In this paper, we show that computing the distributed program reliability on a star distributed computing system is #P-complete. A polynomially solvable case is developed for computing the distributed program reliability when some additional file distribution is restricted on the star topology. We also propose a polynomial time algorithm for computing the distributed program reliability with approximate solutions when the star topology has no the additional file distribution.

In this paper, we have investigated the characteristics of PdYb-silicide layer formed by the silicidation of Pd/Yb/n-Si(100) stacked structures for the first time. Pd (12-20 nm)/Yb (0-8 nm) stacked layers were deposited on n-Si(100) substrates by the RF magnetron sputtering at room temperature. Then, 10 nm-thick HfN encapsulating layer was deposited at room temperature. Next, silicidation was carried out by the RTA at 500°C/1 min in N2 followed by the selective etching. From the J-V characteristics of fabricated Schottky diode, Schottky barrier height (SBH) for electron was reduced from 0.73 eV of Pd2Si to 0.4 eV of PdYb-silicide in case the Pd/Yb thicknesses were 14/6 nm, respectively.

Sparse representation has been successfully applied to visual tracking. Recent progresses in sparse tracking are mainly made within the particle filter framework. However, most sparse trackers need to extract complex feature representations for each particle in the limited sample space, leading to expensive computation cost and yielding inferior tracking performance. To deal with the above issues, we propose a novel sparse tracking method based on the circulant reverse lasso model. Benefiting from the properties of circulant matrices, densely sampled target candidates are implicitly generated by cyclically shifting the base feature descriptors, and then embedded into a reverse sparse reconstruction model as a dictionary to encode a robust appearance template. The alternating direction method of multipliers is employed for solving the reverse sparse model and the optimization process can be efficiently solved in the frequency domain, which enables the proposed tracker to run in real-time. The calculated sparse coefficient map represents the similarity scores between the template and circular shifted samples. Thus the target location can be directly predicted according to the coordinates of the peak coefficient. A scale-aware template updating strategy is combined with the correlation filter template learning to take into account both appearance deformations and scale variations. Both quantitative and qualitative evaluations on two challenging tracking benchmarks demonstrate that the proposed algorithm performs favorably against several state-of-the-art sparse representation based tracking methods.

We have investigated PtHf silicide formation utilizing a developed PtHf-alloy target to realize low contact resistivity for the first time. A 20 nm-thick PtHf-alloy thin film was deposited on the n-Si(100) by RF magnetron sputtering at room temperature. Then, silicidation was carried out by rapid thermal annealing (RTA) system at 450-600°C/5 min in N2/4.9%H2 ambient. The PtHf-alloy silcide, PtHfSi, layers were successfully formed, and the Schottky barrier height (SBH) for electron of 0.45 eV was obtained by 450°C silicidation. Furthermore, low contact resistivity was achieved for fabricated PtHSi such as 8.4x10-8 Ωcm2 evaluated by cross-bridge Kelvin resistor (CBKR) method.

Operations, such as text entry and zooming, are simple and frequently used on mobile touch devices. However, these operations are far from being perfectly supported. In this paper, we present our prototype, BackAssist, which takes advantage of back-of-device input to augment front-of-device touch interaction. Furthermore, we present the results of a user study to evaluate whether users can master the back-of-device control of BackAssist or not. The results show that the back-of-device control can be easily grasped and used by ordinary smart phone users. Finally, we present two BackAssist supported applications - a virtual keyboard application and a map application. Users who tried out the two applications give positive feedback to the BackAssist supported augmentation.

A Lévy search strategy based chaotic artificial bee colony algorithm (LABC) is proposed in this paper. The chaotic sequence, global optimal mechanism and Lévy flight mechanism were introduced respectively into the initialization, the employed bee search and the onlooker bee search. The experiments show that the proposed algorithm performed better in convergence speed, global search ability and optimization accuracy than other improved ABC.

An application of laser annealing process, which is used to form the P-type Base junction for high-performance low-voltage power MOSFETs (Metal Oxide Semiconductor Field Effect Transistors), is proposed. An equivalent shallow-junction structure for P-Base junction with uniform impurity distribution is achieved by adopting green laser annealing of pulsed mode. Higher impurity activation for the shallow junction has been achieved by the laser annealing of melted phase than by conventional RTA (Rapid Thermal Annealing) of solid phase. The application of the laser annealing technology in the fabrication process of Low-Voltage U-MOSFET is also examined.

A generalized class of consecutive-k-out-of-n:G systems, referred to as Con/k*/n:G systems, is studied. A Con/k*/n:G system has n ordered components and is good if and only if ki good consecutive components that originate at component i are all good, where ki is a function of i. Theorem 1 gives an O(n) time equation to compute the reliability of a linear system and Theorem 2 gives an O(n2) time equation for a circular system. A distributed computing system with a linear (ring) topology is an example of such system. This application is very important, since for other classes of topologies, such as general graphs, planar graphs, series-parallel graphs, tree graphs, and star graphs, this problem has been proven to be NP-hard.

A quality-of-service based link control scheme to counteract correlated channel errors for wireless multimedia communications is proposed in this paper. Both the medium access (MAC) and data link control (DLC) layers are treated. The performance of the proposed scheme is evaluated using both analysis and simulation. The delay and jitter behaviors are examined for both the constant bit rate (CBR) traffic and variable bit rate (VBR) traffic. The throughput performance is also obtained for the available bit rate (ABR) traffic. Through numerical experiments, the proposed scheme is demonstrated to be not only robust against channel impairments but also capable of providing the desired QoS for wireless multimedia communications.

Real-time pulse rate (PR) monitoring based on photoplethysmography (PPG) has been drawn much attention in recent years. However, PPG signal detected under movement is easily affected by random noises, especially motion artifacts (MA), affecting the accuracy of PR estimation. In this paper, a parallel method structure is proposed, which effectively combines wavelet threshold denoising with recursive least squares (RLS) adaptive filtering to remove interference signals, and uses spectral peak tracking algorithm to estimate real-time PR. Furthermore, we propose a parallel structure RLS adaptive filtering to increase the amplitude of spectral peak associated with PR for PR estimation. This method is evaluated by using the PPG datasets of the 2015 IEEE Signal Processing Cup. Experimental results on the 12 training datasets during subjects' walking or running show that the average absolute error (AAE) is 1.08 beats per minute (BPM) and standard deviation (SD) is 1.45 BPM. In addition, the AAE of PR on the 10 testing datasets during subjects' fast running accompanied with wrist movements can reach 2.90 BPM. Furthermore, the results indicate that the proposed approach keeps high estimation accuracy of PPG signal even with strong MA.

The use of Internet for various business applications and resource sharing has grown tremendously over the last few years. Internet security has become an important issue for both academic and industrial sectors. Much related network security research has been conducted such as user authentication, data confidentiality, and data integrity. In some applications, a critical document can be divided into pieces and allocated in different locations over the Internet for security access concern. To access such an important document, one must reconstruct the divided pieces from different locations under the given Internet environment. In this paper, a probability model for reconstructing secret sharing and algorithms to perform share assignment are presented. Also, an evaluation algorithm to measure the probability of secret sharing reconstruction is proposed. Illustrative examples and simulation results are provided to demonstrate the applicability of our method.

Input devices based on direct touch have replaced traditional ones and become the mainstream interactive technology for handheld devices. Although direct touch interaction proves to be easy to use, its problems, e.g. the occlusion problem and the fat finger problem, lower user experience. Camera-based mobile interaction is one of the solutions to overcome the problems. There are two typical interaction styles to generate camera-based pointing interaction for handheld devices: move the device or move an object before the camera. In the first interaction style, there are two approaches to move a cursor's position across the handheld display: move it towards the same direction or the opposite direction which the device moves to. In this paper, the results of a comparison research, which compared the pointing performances of three camera-based pointing techniques, are presented. All pointing techniques utilized input from the rear-facing camera. The results indicate that the interaction style of moving a finger before the camera outperforms the other one in efficiency, accuracy, and throughput. The results also indicate that within the interaction style of moving the device, the cursor positioning style of moving the cursor to the opposite direction is slightly better than the other one in efficiency and throughput. Based on the findings, we suggest giving priority to the interaction style of moving a finger when deploying camera-based pointing techniques on handheld devices. Given that the interaction style of moving the device supports one-handed manipulation, it also worth deploying when one-handed interaction is needed. According to the results, the cursor positioning style of moving the cursor towards the opposite direction which the device moves to may be a better choice.

Universal Plug and Play (UPnP) allows devices automatic discovery and control of services available in those devices connected to a Transmission Control Protocol/ Internet Protocol (TCP/IP) network. Although many products are designed using UPnP, little attention has been given to UPnP related to modeling and performance analysis. This paper uses a framework of Generalized Stochastic Petri Net (GSPN) to model and analyze the behavior of UPnP systems. The framework includes modeling UPnP, reachability decomposition, GSPN analysis, and reward assignment. Then, the Platform Independent Petri net Editor 2 (PIPE2) tool is used to model and evaluate the controllers in terms of power consumption, system utilization and network throughput. Through quantitative analysis, the steady states in the operation and notification stage dominate the system performance, and the control point is better than the device in power consumption but the device outperforms the control point in evaluating utilization. The framework and numerical results are useful to improve the quality of services provided in UPnP devices.

Grid computing technologies enable large-scale aggregation and sharing of resources via wide-area networks. Grid technologies include elements such as security, job description, information gathering, scheduling, and resource dispatching, among others. In this paper, we address information gathering and focus on providing a domain-based model for network information measurement using Network Weather Service (NWS) on Grid computing environments.

With more digital home appliances and network devices having OSGi as the software management platform, the power-saving capability of the OSGi platform has become a critical issue. This paper is aimed at improving the power-efficiency of the OSGi platform, i.e. reducing the energy consumption with minimum performance degradation. The key to this study is an efficient power-saving technique which exploits the runtime information already available in a Java virtual machine (JVM), the base software of the OSGi platform, to best determine the timing of performing DVFS (Dynamic Voltage and Frequency Scaling). This, technically, involves a phase detection scheme that identifies the memory phase of the OSGi-enabled device/server in a correct and almost effortless way. The overhead of the power-saving procedure is thus minimized, and the system performance is well maintained. We have implemented and evaluated the proposed power-saving approach on an OSGi server, where the Apache Felix OSGi implementation and the DaCapo benchmarks were applied. The results show that this approach can achieve real power-efficiency for the OSGi platform, in which the power consumption is significantly reduced and the performance remains highly competitive, compared with the other power-saving techniques.

An application of laser annealing process, which is used to form the shallow P-type Base junction for 20-V planar power MOSFETs (Metal Oxide Semiconductor Field Effect Transistors) is proposed. We demonstrated that the fabricated devices integrated with laser annealing process have superior electrical characteristics than those fabricated according to the standard process. Moreover, the threshold voltage variation of the devices applied by the new annealing process is effectively suppressed. This is due to that a uniform impurity distribution at the channel region is achieved by adopting laser annealing. Laser annealing technology can be applied as a reliable, effective, and advantageous process for the low-voltage power MOSFETs.

Common schedulers for long-term running services that perform task-level optimization fail to accommodate short-living batch processing (BP) jobs. Thus, many efficient job-level scheduling strategies are proposed for BP jobs. However, the existing scheduling strategies perform time-consuming objective optimization which yields non-negligible scheduling delay. Moreover, they tend to assign BP jobs in a centralized manner to reduce monetary cost and synchronization overhead, which can easily cause resource contention due to the task co-location. To address these problems, this paper proposes TEBAS, a time-efficient balance-aware scheduling strategy, which spreads all tasks of a BP job into the cluster according to the resource specifications of a single task based on the observation that computing tasks of a BP job commonly possess similar features. The experimental results show the effectiveness of TEBAS in terms of scheduling efficiency and load balancing performance.

A directly modulated AM-VSB CATV erbium-doped fiber amplifier (EDFA)-repeated system that uses push-pull modulated distributed feedback (DFB) laser diodes and half-split-band technique is proposed and demonstrated. Push-pull modulation scheme enhances the frequency response of the laser diode, and thus improves the overall performance of the fiber optical CATV systems. Good performances of carrier-to-noise ratio (CNR), composite second order (CSO), and composite triple beat (CTB) were achieved for the full channel band over a 100-km single-mode fiber (SMF) transport.