In text-independent online writer identification, the Gaussian Mixture Model(GMM) writer model trained with the GMM-Universal Background Model(GMM-UBM) framework has acquired excellent performance. However, the system assumes the items in the observation sequence are independent, which neglects the dynamic information between observations. This work shows that although in the text-independent application, the dynamic information between observations is still important for writer identification. In order to extend the GMM-UBM system to use the dynamic information, the hidden Markov model(HMM) with Gaussian observation model is used to model each writer's handwriting in this paper and a new training schematic is proposed. In particular, the observation model parameters of the writer specific HMM are set with the Gaussian component parameters of the GMM writer model trained with the GMM-UBM framework and the state transition matrix parameters are learned from the writer specific data. Experiments show that incorporating the dynamic information is capable of improving the performance of the GMM-based system and the proposed training method is effective for learning the HMM writer model.

Periodic interference frequently affects the measurement of small signals and causes problems in clinical diagnostics. Adaptive filters can be used as potential tools for cancelling such interference. However, when the interference has a frequency fluctuation, the ideal adaptive-filter coefficients for cancelling the interference also fluctuate. When the adaptation property of the algorithm is slow compared with the frequency fluctuation, the interference-cancelling performance is degraded. However, if the adaptation is too quick, the performance is degraded owing to the target signal. To overcome this problem, we propose an adaptive filter that suppresses the fluctuation of the ideal coefficients by utilizing a $rac{pi}{2}$ phase-delay device. This method assumes a frequency response that characterizes the transmission path from the interference source to the main input signal to be sufficiently smooth. In the numerical examples, the proposed method exhibits good performance in the presence of a frequency fluctuation when the forgetting factor is large. Moreover, we show that the proposed method reduces the calculation cost.

A statistical call admission control (CAC) allows more calls with on-off patterns to be accepted and a higher channel efficiency to be achieved. In this paper, we propose three statistical CACs for VoIP calls with silence suppression considering the priority of each VoIP call, where the call priority is determined by the call acceptance order in an IP-PBX. We analyse the packet loss rates in an IP-PBX under the proposed strategies and express the end-to-end QoS of a VoIP call as an R-factor in a VoIP service network. The performances of the proposed CACs are evaluated using the maximum allowable number of VoIP calls while satisfying the end-to-end QoS constraint, the average QoS of acceptable VoIP calls and the channel efficiency. The advantage of the proposed statistical CACs over the non-statistical CAC is verified in terms of these three performance metrics. The results indicate that a trade-off is possible in that the maximum allowable number of VoIP calls in an IP-PBX increases as the average QoS of acceptable VoIP calls is lowered according to the proposed statistical CAC used. Nevertheless, the results allow us to verify that the channel efficiencies are the same for all the statistical CACs considered.

Shadow is an important effect that makes virtual 3D scenes more realistic. In this paper, we propose a fast and correct soft shadow generation method for area lights of various shapes and colors. To conduct efficient as well as accurate visibility tests, we exploit the complexity of shadow and area light color.

With the popularization of Internet of things (IoT), the interaction between human and IoT has become a daily life. In this interaction, the objects of IoT usually require access to personal data, which are often sensitive. We propose a lightweight privacy-preserving model based on the trust evaluation that it can effectively protect privacy based on simple threshold detection. The key issue we address in this work is how to construct trust model so that non trusted objects were prevented from accessing private data. This work can be considered as a lightweight approach to access control for privacy-preservation. The main algorithm in the proposed model is a kind of dynamic self-adjusting trust evaluation mechanism that uses a combination of interaction information occurs between the human and the Internet of things, between the human and the human. According to the given threshold, the trust model can determine the data level of object access in the IoT. We have implemented a prototype of the proposed scheme, thereby demonstrating the feasibility of the proposed scheme on resource-constrained devices.

In this paper, we study the achievable degrees of freedom (DoF) of a multiple-input multiple-output (MIMO) multi-way relay channel with asymmetric message set that models the scenario of the two-way communication between a base station and multiple users through a relay. Under the assumption of delayed channel state information at transmitters (CSIT), we propose an amplify-and-forward relaying scheme based on the scheme proposed by Maddah-Ali and Tse to support signal space alignment, so that the available dimensions of the signal spaces at the relay and the users can be efficiently utilized. The proposed scheme outperforms the traditional one-way scheme from the perspective of DoF, and is useful to relieve the communication bottleneck caused by the asymmetric traffic load inherent in cellular networks.

We have succeeded in developing three techniques, a precise lens-alignment technique, low-loss built-in Spatial Multiplexing optics and a well-matched electrical connection for high-frequency signals, which are indispensable for realizing compact high-performance TOSAs and ROSAs employing hybrid integration technology. The lens position was controlled to within ±0.3 µm by high-power laser irradiation. All components comprising the multiplexing optics are bonded to a prism, enabling the insertion loss to be held down to 0.8 dB due to the dimensional accuracy of the prism. The addition of an FPC layer reduced the impedance mismatch at the junction between the FPC and PCB. We demonstrated a compact integrated four-lane 25 Gb/s TOSA (15.1 mm × 6.5 mm × 5.6 mm) and ROSA (17.0 mm × 12.0 mm × 7.0 mm) using the built-in spatial Mux/Demux optics with good transmission performance for 100 Gb/s Ethernet. These are respectively suitable for the QSFP28 and CFP2 form factors.

Spectrum sharing effectively improves the spectrum usage by allowing secondary users (SUs) to dynamically and opportunistically share the licensed bands with primary users (PUs). The concept of cooperative spectrum sharing allows SUs to use portions of the PUs' radio resource for their own data transmission, under the condition that SUs help the PUs' transmission. The key issue with designing such a scheme is how to deal with the resource splitting of the network. In this paper we propose a relay-based cooperative spectrum sharing scheme in which the network consists of one PU and multiple SUs. The PU asks the SUs to relay its data in order to improve its energy efficiency, in return it rewards the SUs with a portion of its authorized spectrum. However each SU is only allowed to transmit its data via the rewarded channel at a power level proportional to the contribution it makes to the PU. Since energy cost is considered, the SUs must carefully determine their power level. This scheme forms a non-cooperative Stackelberg resource allocation game where the strategy of PU is the bandwidth it rewards and the strategy of each SU is power level of relay transmission. We first investigate the second stage of the sub-game which is addressed as power allocation game. We prove there exists an equilibrium in the power allocation game and provide a sufficient condition for the uniqueness of the equilibrium. We further prove a unique Stackelberg equilibrium exists in the resource allocation game. Distributed algorithms are proposed to help the users with incomplete information achieve the equilibrium point. Simulation results validate our analysis and show that our proposed scheme introduces significant utility improvement for both PU and SUs.

The mixer is a crucial circuit block in a WiMax system receiver. The performance of a mixer depends on three specifications: conversion gain, linearity and noise figure. Many mixers have been recently proposed for UWB and wideband systems; however, they either cannot achieve the high conversion gain required for a WiMAX system or they are prone to high power consumption. In this paper, a folded mixer with a high conversion gain is designed for a 2-11GHz WiMAX system and it can achieve a 20MHz IF output signal. From the simulation results, the proposed folded mixer achieves a conversion gain of 18.9 to 21.5dB for the full bandwidth. With a 0.2 to 4.4dBm IIP3, the NF is 13.5 to 17.6dB. The folded mixer is designed using TSMC 0.18µm CMOS technology. The core power consumption of the mixer is 11.8mW.

This paper reports dual-polarization In-phase and Quadrature (DP-IQ) modulators and photodetectors integrated with the 90° hybrid using InP-based monolithic integration technologies for 100/200Gb/s coherent transmission. The DP-IQ modulator was monolithically integrated with the Mach-Zehnder modulator array consisting of deep-ridge waveguides formed through dry etching and benzocyclobutene planarization processes. This DP-IQ modulator exhibited the low half-wavelength voltage (Vπ=1.5V) and the wide 3-dB bandwidth (f3dB > 28GHz). The photodetector monolithically integrated with the 90° hybrid consisting of multimode interference structures was realized by the butt-joint regrowth. A responsivity including total loss of 7.9dB in the waveguide was as high as 0.155A/W at a wavelength of 1550nm, and responsivity imbalance of the In-phase and Quadrature channels was less than ±0.5dB over the C-band. In addition, the low dark current (less than 500pA up to 85°C @ -3.0V) and the stable operation in the accelerated aging test (test condition: -5V at 175°C) over 5,000h were successfully achieved for the p-i-n-photodiode array with a buried heterostructure formed through the selective embedding regrowth. Finally, a receiver responsivity including intrinsic loss of 3dB in the polarization beam splitter was higher than 0.070A/W at a wavelength of 1550nm through the integration of the spot-size converter, and demodulation of 128Gb/s DP-QPSK and 224Gb/s DP-16QAM modulated signals was demonstrated for the compact coherent receiver using this photodetector integrated with the 90° hybrid. Therefore, we indicated that these InP-based monolithically integrated photonic devices are very useful for 100/200Gb/s pluggable coherent transceivers.

Advances in intelligent vehicle systems have led to modern automobiles being able to aid drivers with tasks such as lane following and automatic braking. Such automated driving tasks increasingly require reliable ego-localization. Although there is a large number of sensors that can be employed for this purpose, the use of a single camera still remains one of the most appealing, but also one of the most challenging. GPS localization in urban environments may not be reliable enough for automated driving systems, and various combinations of range sensors and inertial navigation systems are often too complex and expensive for a consumer setup. Therefore accurate localization with a single camera is a desirable goal. In this paper we propose a method for vehicle localization using images captured from a single vehicle-mounted camera and a pre-constructed database. Image feature points are extracted, but the calculation of camera poses is not required — instead we make use of the feature points' scale. For image feature-based localization methods, matching of many features against candidate database images is time consuming, and database sizes can become large. Therefore, here we propose a method that constructs a database with pre-matched features of known good scale stability. This limits the number of unused and incorrectly matched features, and allows recording of the database scales into “tracklets”. These “Feature scale tracklets” are used for fast image match voting based on scale comparison with corresponding query image features. This process reduces the number of image-to-image matching iterations that need to be performed while improving the localization stability. We also present an analysis of the system performance using a dataset with high accuracy ground truth. We demonstrate robust vehicle positioning even in challenging lane change and real traffic situations.

Wafers with smooth Au thin films (rms surface roughness: < 0.5nm, thickness: < 50nm) were successfully bonded in ambient air at room temperature after an Ar radio frequency plasma activation process. The room temperature bonded glass wafers without any heat treatment showed a sufficiently high die-shear strength of 47-70MPa. Transmission electron microscopy observations showed that direct bonding on the atomic scale was achieved. This surface-activated bonding method is expected to be a useful technique for future heterogeneous photonic integration.

Rapid process scaling and the introduction of the multilevel cell (MLC) concept have lowered costs of NAND Flash memories, but also degraded reliability. For this reason, the memories are depending on strong error correcting codes (ECCs), and this has enabled the memories to be used in wide range of storage applications, including solid-state drives (SSDs). Meanwhile, too strong error correcting capability requires excessive decoding complexity and check bits. In NAND Flash memories, cell errors to neighborhood voltage levels are more probable than those to distant levels. Several ECCs reflecting this characteristics, including limited-magnitude ECCs which correct only errors with a certain limited magnitude and low-density parity check (LDPC) codes, have been proposed. However, as most of these ECCs need the multiple bits in a cell for encoding, they cannot be used with multipage programing, a high speed programming method currently employed in the memories. Also, binary ECCs with Gray codes are no longer optimal when multilevel voltage shifts (MVSs) occur. In this paper, an error correction method reflecting the error characteristic is presented. This method detects errors by a binary ECC as a conventional manner, but a nonbinary value or whole the bits in a cell, are subjected to error correction, so as to be corrected into the most probable neighborhood value. The amount of bit error rate (BER) improvement is depending on the probability of the each error magnitude. In case of 2bit/cell, if only errors of magnitude 1 and 2 can occur and the latter occupies 5% of cell errors, acceptable BER is improved by 4%. This is corresponding to extending 2.4% of endurance. This method needs about 15% longer average latency, 19% longer maximum latency, and 15% lower throughput. However, with using the conventional method until the memories' lifetime number of program/erase cycling, and the proposed method after that, BER improvement can be utilized for extending endurance without latency and throughput degradation until the switch of the methods.

A 12-bit 1.25MS/s cyclic analog-to-digital converter (ADC) is designed and fabricated in 90nm CMOS technology, and only occupies an active area as small as 0.037mm2. The proposed ADC is composed of a non-binary AD convertion stage, and a on-chip non-binary-to-binary digital block includes a built-in radix-value self-estimation scheme. Therefore, althouh a non-binary convertion architechture is adopted, the proposed ADC is the same as other stand-alone binary ADCs. The redundancy of non-binary 1-bit/step architecture relaxes the accuracy requirement on analog components of ADC. As a result, the implementation of analog circuits such as amplifier and comparator becomes simple, and high-density Metal-Oxide-Metal (MOM) capacitors can be used to achieve a small chip area. Furthermore, the novel radix-value self-estimation technique can be realized by only simple logic circuits without any extra analog input, so that the total active area of ADC is dramatically reduced. The prototype ADC achieves a measured peak signal-to-noise-and-distortion-ratio (SNDR) of 62.3dB using a poor DC gain amplifier as low as 45dB and MOM capacitors without any careful layout techniques to improve the capacitor matching. The proposed ADC dissipated 490µW in analog circuits at 1.4V power supply and 1.25Msps (20MHz clocking). The measured DNL is +0.94/-0.71LSB and INL is +1.9/-1.2LSB at 30kHz sinusoidal input.

The layered cell configuration, in which a large number of small cells are set in a macro-cell coverage area, is attracting much attention recently as a promising approach to handle the rapidly increasing mobile data traffic. In this configuration, cells of various sizes, from macro to small, are placed in various locations, so that the variation in the number and the distribution of the users among cells becomes much wider than in conventional macro-cell homogeneous networks. Therefore, even in the layered cell configuration, the users in the cell with many users and low received signal quality may experience low throughput especially at cell edge. This is because such users experience both low spectral efficiency and few radio resources. In order to resolve this issue, a lot of techniques have been proposed such as load balancing and cooperative multi-point transmission. In this paper, we focus on scheduling priority control as a simple solution that can also be used in combination with load balancing and coordinated multi-point transmission. We propose an adaptive scheduling priority control scheme based on the congestion and user distribution of each cell and clarify the effect of the proposed method by computer simulations.

Similarity search is an important and fundamental problem, and thus widely used in various fields of computer science including multimedia, computer vision, database, information retrieval, etc. Recently, since loitering behavior often leads to abnormal situations, such as pickpocketing and terrorist attacks, its analysis attracts increasing attention from research communities. In this paper, we present AntiLoiter, a loitering discovery system adopting efficient similarity search on surveillance videos. As we know, most of existing systems for loitering analysis, mainly focus on how to detect or identify loiterers by behavior tracking techniques. However, the difficulties of tracking-based methods are known as that their analysis results are heavily influenced by occlusions, overlaps, and shadows. Moreover, tracking-based methods need to track the human appearance continuously. Therefore, existing methods are not readily applied to real-world surveillance cameras due to the appearance discontinuity of criminal loiterers. To solve this problem, we abandon the tracking method, instead, propose AntiLoiter to efficiently discover loiterers based on their frequent appearance patterns in longtime multiple surveillance videos. In AntiLoiter, we propose a novel data structure Luigi that indexes data using only similarity value returned by a corresponding function (e.g., face matching). Luigi is adopted to perform efficient similarity search to realize loitering discovery. We conducted extensive experiments on both synthetic and real surveillance videos to evaluate the efficiency and efficacy of our approach. The experimental results show that our system can find out loitering candidates correctly and outperforms existing method by 100 times in terms of runtime.

In this letter, we propose a novel speech separation method based on perceptual weighted deep recurrent neural network (DRNN) which incorporate the masking properties of the human auditory system. In supervised training stage, we firstly utilize the clean label speech of two different speakers to calculate two perceptual weighting matrices. Then, the obtained different perceptual weighting matrices are utilized to adjust the mean squared error between the network outputs and the reference features of both the two clean speech so that the two different speech can mask each other. Experimental results on TSP speech corpus demonstrate that the proposed speech separation approach can achieve significant improvements over the state-of-the-art methods when tested with different mixing cases.

Crystalline GaN films can be grown even on amorphous substrates with the use of graphene buffer layers by pulsed sputtering deposition (PSD). The graphene buffer layers allowed us to grow highly c-axis-oriented GaN films at low substrate temperatures. Full-color GaN-based LEDs can be fabricated on the GaN/graphene structures and they are operated successfully. This indicates that the present technique is promising for future large-area light-emitting displays on amorphous substrates.