This paper proposes a new theory and design method for a class of recombination nonuniform filter banks (RNFBs) with linear phase (LP) filters. In a uniform filter bank (FB), consecutive channels are merged by sets of transmultiplexers (TMUXs) to realize a nonuniform FB. RNFBs with LP analysis/synthesis filters are of great interest because the analysis filters for the partially reconstructed signals, through merging, are LP and hence less phase distortions are introduced to the desired signals. We analyze the spectrum supports of the analysis filters of these LP RNFBs. The conditions on the uniform FB and recombination TMUXs of an LP RNFB with good frequency characteristics are determined. These conditions are relatively simple to be satisfied and the uniform FB and recombination TMUXs can be designed separately without much degradation in performance. This allows dynamically recombination of different number of channels in the original uniform FB to give a flexible and time-varying frequency partitioning. Using these results, a method for designing a class of near-perfect-reconstruction (NPR) LP RNFBs with cosine roll-off transition band using the REMEZ algorithm is proposed. A design example is given to show that LP RNFBs with good frequency responses and reasonably low reconstruction errors can be achieved.

Call admission control (CAC) plays a significant role in providing the efficient use of the limited bandwidth and the desired quality-of-service (QoS) in mobile multimedia communications. As efficiency is an important performance issue for CAC in the mobile networks with multimedia services, the concept of fairness among services should also be considered. Game theory provides an appropriate framework for formulating such fair and efficient CAC problem. Thus, in this paper, a framework based on game theory (both of noncooperative and cooperative games) is proposed to select fair-efficient guard bandwidth coefficients of the CAC scheme for the asymmetrical traffic case in mobile multimedia communications. The proposed game theoretic framework provides fairness and efficiency in the aspects of bandwidth utilization and QoS for multiple classes of traffic, and also guarantees the proper priority mechanism. Call classes are viewed as the players of a game. Utility function of the player is defined to be of two types, the bandwidth utilization and the weighted sum of new call accepting probability and handoff succeeding probability. The numerical results show that, for both types of the utility function, there is a unique equilibrium point of the noncooperative game for any given offered load. For the cooperative game, the arbitration schemes for the interpersonal comparisons of utility and the bargaining problem are investigated. The results also indicate that, for both types of the utility function, the Nash solution with the origin (0,0) as the starting point of the bargaining problem can achieve higher total utility than the previous CAC scheme while at the same time providing fairness by satisfying a set of fairness axioms. Since the Nash solution is determined from the domain of the Pareto boundary, the way to generate the Pareto boundary is also provided. Therefore, the Nash solution can be obtained easily.

Two types of miniaturized high-temperature superconducting filters are described in this paper. The first type is developed by using small-sized microstrip spiral resonators, and the second type by coplanar waveguide quarter-wavelength resonators. The filters have significantly reduced size compared with many previous HTS filters. They are designed by employing an electromagnetic simulator in combination with appropriately chosen equivalent circuits. Their measured frequency responses agree well with theoretical predictions, and show low insertion losses in spite of their small sizes.

This paper presents a novel method of designing microstrip line multi-frequencies band filters by applying the SIR (stepped impedance resonators) technology. Utilizing the S-parameter and the ABCD parameters of a two-port network is for the analysis of short-circuited and open-circuited resonators with various combinations of series and shunt sequences. By controlling the impedance ratio of the resonators, both center frequencies of the two passbands then are determined. Moreover, a global synthesis approach is also discussed on miniaturization. A simplified architecture based on bent SIR offers the 50% area reduction of layout. Technology of matching circuit creates higher performance multi-band filter. We adjust impedance and electrical length of transmission line (TL) to compensate multi-band and bending for matches and highly improve the insertion and reflection loss. Simulation and measurement are performed to validate our method and are pretty matched.

The direct optical switching CDMA radio-on-fiber network is proposed as multiplexing method for radio base stations in microcell/picocell technologies. In this system, aliasing distortions degrade the received signal quality and decreases the number of connectable radio base stations (RBSs) when the encoding rate becomes lower than the twice of bandwidth of RF signal. This paper proposes the optical switching speed reduction method and clarifies that the chaotic spreading sequences can suppress the aliasing distortion without additional processing at the receiver even if the encoding rate becomes lower than the RF signal bandwidth. The effect in switching speed reduction is theoretically investigated and the effect in aliasing distortions suppression is experimentally investigated by using the proposed method.

In AMS/OFDM systems, base station is in control of the modulation level of each subcarrier, and then, adaptive modulated packet is transmitted from the base station to the mobile station. In this case, the mobile station is required the modulation level information (MLI) to demodulate the received packet. The MLI is generally transmitted as a data symbol, therefore, the throughput is degraded. In an OFDM, the channel response at a particular subcarrier frequency is not supposed to be totally different from its neighboring frequencies, and hence, they must have correlation which depends on the coherence bandwidth of the channel Bc. If we could assign the same modulation level for coherently faded subcarrier block, MLI is required only one time for each subcarrier block. Moreover, we can assign the data on the empty space of pilot signals for increasing the total transmission. In this paper, we propose an adaptive subcarrier block modulation with differentially modulated pilot symbol assistance for downlink OFDM using uplink delay spread.

Resilient Packet Ring (RPR) is a new technology currently being standardized in the IEEE 802.17 working group. The existed bandwidth allocation algorithms for RPR networks are not able to provide satisfactory solutions to meet the performance requirements. In this paper we propose one fair bandwidth allocation algorithm, termed PID-RPR, which satisfies the performance goals of RPR networks, such as fairness, high utilization and maximal spatial reuse. The algorithm is operated at each RPR node in a distributive way; the proportional, integral and differential (PID) controller is used to allocate bandwidth on the outgoing link of the node for the flows over the link in a weighted manner. To achieve the global coordination, one control packet containing every node's message runs around the ring in order to update the relevant message for all nodes on the ring. When the packet reaches one node, this node adjusts its own rate according to its own message in the control packet; in the meantime it updates other nodes' control message in the control packet. As the control packet propagates around the ring, each node can eventually adjust its sending rate to reach its fair share according to the fairness criterion, and the buffer occupancy at each node is kept within the target value. Our algorithm is of distributed nature in the sense that upstream ring nodes inject traffic at a rate according to congestion and fairness criteria downstream. The simulation results demonstrate that satisfactory performance of RPR networks can be achieved under the proposed bandwidth allocation scheme.

In a partially coupled-line bandpass filter (BPF), a combination of two microstrip line resonators which are partially coupled, are considered, where one resonator is half-wavelength (λ/2)-long, and another whose one end is grounded, is only quarter-wavelength (λ/4)-long. Therefore, the length of a coupled-line section can be varied based on the position of the grounding end, and five conditions of the movable coupling length have been simulated which will greatly influence the spurious responses of a BPF. This property is numerically investigated in this paper. The analysis shows that, based on the grounding position, this method is capable of realizing the improved out-of-band characteristics by locating the multiple attenuation poles in the stopband and improved spurious responses up to five times of the center frequency (5f0). A few empirical models of BPF are fabricated, and the numerical results are ensured by comparing with the experimental results.

A new microstrip compatible phase shifter circuit is introduced. The phase shifter uses a strip-type electromagnetic bandgap (EBG) substrate in place of the solid metal ground plane. Such EBG substrates, when made of ferroelectric materials, can produce variable phase constants useful for phase shifter applications. Test models using two different EBG substrates with dielectric constants of 9.2 and 10.2 showed 44.5 degrees of phase difference with 1.7 dB of added insertion loss at 10 GHz from a line originally 504 degrees long.

This paper describes a method of extending the signal frequency bandwidth while increasing the stability of a CMOS transimpedance amplifier (TIA). The TIA consists of three inverting amplifiers in a series, and a high-pass filter plus a non-inverting amplifier that are connected to the last two inverting amplifiers stated above in parallel. The TIA is fabricated using a 0.35 µm CMOS process and realizes stable conversion of 60-dBΩ from the photodiode current to the output voltage with more than 500 MHz of signal frequency bandwidth and 60 mW of power consumption from a 3.3 V supply voltage.

This paper attempts to use the polarimetric correlation coefficient for extraction of the polarimetric features of the urban areas and the natural distributed areas from Polarimetric Synthetic Aperture Radar (POLSAR) data. There is a possibility that the polarimetric correlation coefficient can reveal various scattering mechanisms of terrains based on the reflection symmetry property. In order to verify the capability of polarimetric correlation coefficient, we examined the behavior of this coefficient of the urban areas and the natural distributed areas with respect to the several polarimetric scattering models in the linear and circular polarization bases, and the difference of the polarimetric scattering characteristics between these two areas was derived. It was confirmed that the polarimetric correlation coefficient is useful to extract the polarimetric features from the actual L-band and X-band POLSAR data.

The measurement results of clear sky attenuation on an earth-satellite path at frequency Ku band in Laos are described. The measurement results show that diurnal clear sky noise vary with respect to humidity characteristics, which is a significant value in the early morning while low at daytime. The mean difference in variation is about 0.7 dB.

This paper presents a dual-band mixer equipped with a dual-band load using current combine technique to minimize chip area by sharing inductors for each frequency band. A systematic design methodology for the current combine load based on parasitic effect considerations is also developed. By following the proposed design procedure, the load inductance and combine capacitance for the dual-band mixer can be easily determined. A 2.4/5.2-GHz CMOS mixer design has been implemented to demonstrate the feasibility of the design technique.

A RF front-end chip for a dual-band Global Positioning System (GPS) receiver for L1 and L2 bands is designed using 0.25 µm CMOS technology. All function blocks of the GPS front-end are integrated onto one chip. The low noise amplifier has input matching over a wide frequency range to handle the L1 and L2 bands. This receiver uses a dual-band image-reject mixer with the quadrature mixer sharing a transconductor stage. This configuration enables the RF blocks to be shared with the L1 and L2 bands. The receiver has a chip area of 3.16 mm3.16 mm, and consumes 35 mA at 2.5 V.

This paper describes a system architecture along with signal processing technique which allows a reduction in the complexity of a 3.1-10.6 GHz Ultra-Wideband radio. The proposed system transmits passband pulses using a pulser and antenna, and the receiver front-end down-converts the signal frequency by subsampling, thus, requiring substantially less hardware than a traditional narrowband approach. However, the simplified receiver front end shows a high sensitivity to timing offset. By proposing an analytic signal processing technique, the vulnerability of timing offset is mitigated; furthermore, a time resolution finer than the sampling period is achieved, which is useful for locationing or ranging applications. Analysis and simulations of system specifications are also provided in this paper.

Based on the periodical-loaded principle, a new wider stop-band filter is presented. The design equations are provided, the validity of which is proved by the measured results. Compared with loaded stub of length 1/4λg, the improved T-shape stub can change admittance paralleled with microstrip line and widen the band width of the band-stop filter. The size of the filter loaded by one side can be reduced by 2/3. The stop-band filter loaded by one side and two sides are simulated and realized. The filter loaded by two sides can achieve very wide stop-band. In addition, the stop-band of the new type of filter is deep and steep.

Periodically nonuniform coupled microstrip line (PNC-ML) loaded with transverse slits is characterized using the fullwave method of moments and short-open calibration technique. Guided-wave characteristics of both even- and odd-modes are thoroughly investigated in terms of two extracted per-unit-length transmission parameters, i.e., phase constants and characteristic impedances. As such, frequency-dependent coupling between the lines of the finite-extended PNCML is exposed via two dissimilar impedances. Meanwhile, two phase constants try to be equalized at a certain frequency by properly adjusting the slit depth and periodicity, aiming at realizing the transmission zero. Further, equivalent J-inverter network parameters of this finite-length PNCML are derived to reveal the relationship between the transmission zero and harmonic resonance. By allocating this zero to the frequency twice the fundamental passband, one-stage and two-stage PNCML filters are then designed, fabricated and measured to showcase the advantageous capacity of the proposed technique in harmonic suppression.

The present paper describes a quality enhancement of band-limited speech signals. In regular telephone communication, the quality of the received speech signal is degraded by band limitation. We propose an effective but simple scheme for obtaining narrowband speech signals in which the frequency components are estimated from band limited signals. The proposed method utilizes aliasing components generated by wavelet reconstruction filters in the inverse discrete wavelet transform. The results of enhancement have been verified by applying this method to speech samples via telephone lines to obtain a noticeable improvement in speech quality.

We investigate the impact of electrical band-limitation on the transmission performance of both carrier suppressed return-to-zero (CSRZ) and CSRZ differential phase shift keying (CSRZ-DPSK) format for high spectral efficiency DWDM systems. Results show that electrical band-limitation improves signal spectral compactness, leading to reduced linear crosstalk and improved tolerance against chromatic dispersion in optical fiber link without causing any degradation to fiber nonlinearity tolerance. In addition, it is shown that the electrical band-limitation is more efficient to CSRZ-DPSK signal than CSRZ signal in reducing signal degradation caused by linear crosstalk and fiber chromatic dispersion.

This paper proposes a new angular measurement system to a moving target in the presence of clutter. We apply MUSIC (MUltiple SIgnal Classification) to the outputs of a Doppler filter bank consisting of quadrature mirror filter (QMF). The comparison between QMF and the short time Fourier transform (STFT) as a preprocessor of MUSIC is also discussed. DOA estimation performance by QMF-MUSIC is nearly equal to that of STFT-MUSIC. On the other hand, QMF-MUSIC overcomes STFT-MUSIC in the aspect of computational cost. In a specific example in this paper, the proposal QMF bank by Daubechies (4th order) wavelet requires 80% fewer the number of multiplications and 25% fewer the number of additions than the FFT-based STFT filter bank.