In this letter, we address the problem of downlink power allocation for the generalized distributed antenna system (DAS) with cooperative clusters. Considering practical applications, we assume that only the large-scale channel state information is available at the transmitter. The power allocation scheme is investigated with the target of ergodic achievable sum rate maximization. Based on some approximations and the Rayleigh Quotient Theory, the simple selective power allocation scheme is derived for the low SNR scenario and the high SNR scenario, respectively. The methods are applicable in practice due to their low complexity.

This paper proposes a new pattern matching architecture with multi-character processing for deep packet inspection. The proposed pattern matching architecture detects the start point of pattern matching from multi-character input using input text alignment. By eliminating duplicate hardware components using process element tree, hardware cost is greatly reduced in the proposed pattern matching architecture.

This paper proposes a method of correcting annotation errors in a treebank. By using a synchronous grammar, the method transforms parse trees containing annotation errors into the ones whose errors are corrected. The synchronous grammar is automatically induced from the treebank. We report an experimental result of applying our method to the Penn Treebank. The result demonstrates that our method corrects syntactic annotation errors with high precision.

The spatio-temporal multiple view geometry can represent the geometry of multiple images in the case where non-rigid arbitrary motions are viewed from multiple translational cameras. However, it requires many corresponding points and is sensitive to the image noise. In this paper, we investigate mutual projections of cameras in four-dimensional space and show that it enables us to reduce the number of corresponding points required for computing the spatio-temporal multiple view geometry. Surprisingly, take three views for instance, we no longer need any corresponding point to calculate the spatio-temporal multiple view geometry, if all the cameras are projected to the other cameras mutually for two time intervals. We also show that the stability of the computation of spatio-temporal multiple view geometry is drastically improved by considering the mutual projections of cameras.

This letter proposes extended single parity check product codes and presents their empirical performances on a Gaussian channel by belief propagation (BP) decoding algorithm. The simulation results show that the codes can achieve close-to-capacity performance in high coding rate. The code of length 9603 and of rate 0.96 is only 0.77 dB away from the Shannon limit for a BER of 10-5.

In order to clarify the physics of contact life time, the relationship between heat capacity of holder and shape of bridge (length and diameter) is discussed in this paper. The AgPd60 alloy is chosen as electrode material. Two holders with different heat capacity are comprised of copper plate and cylinder. The shape of the bridge at the low speed breaking contact is observed by using the high speed digital camera. It was demonstrated that the shape of the bridge is changed by the response and distribution of the temperature.

We propose and demonstrate a new type of field installable optical connector that enables us to realize physical contact connection without polishing the fiber endface by using a sharpened fiber endface and the compression force of buckled fiber. We confirmed that all the assembled connectors achieved physical contact connection without the fiber endface being polished, and provided good optical performance with a low insertion loss of 0.08 dB and a high return loss of over 49 dB.

In this paper, we propose an exact analytical technique to evaluate the average capacity of a dual-hop OFDM relay system with decode-and-forward protocol in an independent and identical distribution (i.i.d.) Rayleigh fading channel. Four schemes, (no) matching "and" or "or" (no) power allocation, will be considered. First, the probability density function (pdf) for the end-to-end power channel gain for each scheme is described. Then, based on these pdf functions, we will give the expressions of the average capacity. Monte Carlo simulation results will be shown to confirm the analytical results for both the pdf functions and average capacities.

This paper proposes a new power-factor-correction (PFC) topology, and explains its operation principle, its control mechanism, related application problems followed by experimental results. In this proposed topology, critical-conduction-mode (CRM) interleaved technique is applied to a bridgeless PFC in order to achieve high efficiency by combining benefits of each topology. This application is targeted toward low to middle power applications that normally employs continuous-conduction-mode boost converter.

Stream Control Transmission Protocol (SCTP) is a new transport layer protocol for the next generation Internet. SCTP is a connection-oriented protocol that carries over TCP's features but also supports UDP-like message-oriented data transmission. In this paper, we make use of SCTP's multi-streaming feature to transmit MPEG-4 video efficiently, and evaluate its transmission performance under the policy with/without differentiated retransmission. Moreover, to enhance the communication quality, we extend SCTP multi-streaming to realize selective retransmission policy. Our extension utilizes packet-by-packet timestamps to control retransmission of lost packets. By computer simulation, we show that SCTP can (1) improve the video quality by exploiting the multi-streaming and partial reliability features, (2) enhance the video transmission quality by adjusting SCTP fast retransmit threshold, and (3) SCTP with our selective retransmission extension can further improve the whole performance.

In the conventional multi-input multi-output (MIMO) communication systems, most of the antenna selection methods considered are suitable only for spatially separated uni-polarized system under Rayleigh fading channel in non-line of sight (NLOS) condition. There have a few antenna selection schemes for the cross-polarized system in LOS condition and Ricean fading channel, and no antenna selection scheme for the MIMO channel with both LOS and NLOS. In the practical MIMO channel case, influence of LOS and NLOS conditions in the channel can vary from time to time according to the channel parameters and user movement in the system. Based on these influences and channel condition, uni-polarized system may outperform a cross-polarized. Thus, we should consider this kind of practical MIMO channel environment when developing the antenna selection scheme. Moreover, no research work has been done on reducing the complexity of antenna selection for this kind of practical MIMO channel environment. In this paper, reduced complexity in antenna selection is proposed to give the higher throughput in the practical MIMO channel environment. In the proposed scheme, suitable polarized antennas are selected based on the calculation of singular value decomposition (SVD) of channel matrix and then adaptive bit loading is applied. Simulation results show that throughput of the system can be improved under the constraint of target BER and total transmit power of the MIMO system.

We describe a user scheduling scheme suitable for zero-forcing beamforming (ZFBF) downlink multiuser multiple-input multiple-output (MU-MIMO) orthogonal frequency-division multiplexing (OFDM) transmissions in time-division-duplex distributed antenna systems. This user scheduling scheme consists of inter-cell-interference mitigation scheduling by using fractional frequency reuse, proportional fair scheduling in the OFDM frequency domain, and high-capacity ZFBF-MU-MIMO scheduling by using zero-forcing with selection (ZFS). Simulation results demonstrate in a severe user-distribution condition that includes cell-edge users that the proposed user scheduling scheme achieves high average cell throughputs close to that provided by only ZFS and that it also achieves almost the same degree of user fairness as round-robin user scheduling.

This paper represents a low noise second harmonic oscillator using mutually synchronized Gunn diodes. A multi-layer MIC technology is adopted to reduce the circuit size of the oscillator. The oscillator consists of Gunn diodes, slot line resonators and strip lines. By embedding Gunn diodes in the slot line resonators, a harmonic RF signal can be generated very easily. The strip lines are used for the power combining output circuit. The shape of slot line resonator is square in order to achieve the low phase noise and the suppression of undesired harmonics. The second harmonic oscillator is designed and fabricated in K band. The output power is +8.89 dBm at the design frequency of 18.75 GHz (2f0) with the phase noise of -116.2 dBc/Hz at the offset frequency of 1 MHz. Excellent suppression of the undesired fundamental frequency signal (f0) of -33 dBc is achieved. Also, the circuit size is reduced by three-tenths relative to that of the previously proposed circuit.

When a zero offset reference sequence is defined, the i-bit shifted sequence has phase offset i with respect to the reference sequence. In this letter, we propose a new algorithm to compute phase offsets for a periodic binary sequence using the concept of order and index of an integer based on the number theoretical approach. We define an offset evaluation function that is used to calculate the phase offset, and derive properties of the function. Once the function is computed, the phase offset of the sequence is simply obtained by taking the index of it. The new algorithm overcomes the restrictions found in conventional methods on the length and the number of '0's and '1's in binary codes. Its application to the code acquisition is also investigated to show the proposed method is useful.

Intrusion Detection Systems (IDS) have been received considerable attention among the network security researchers as one of the most promising countermeasures to defend our crucial computer systems or networks against attackers on the Internet. Over the past few years, many machine learning techniques have been applied to IDSs so as to improve their performance and to construct them with low cost and effort. Especially, unsupervised anomaly detection techniques have a significant advantage in their capability to identify unforeseen attacks, i.e., 0-day attacks, and to build intrusion detection models without any labeled (i.e., pre-classified) training data in an automated manner. In this paper, we conduct a set of experiments to evaluate and analyze performance of the major unsupervised anomaly detection techniques using real traffic data which are obtained at our honeypots deployed inside and outside of the campus network of Kyoto University, and using various evaluation criteria, i.e., performance evaluation by similarity measurements and the size of training data, overall performance, detection ability for unknown attacks, and time complexity. Our experimental results give some practical and useful guidelines to IDS researchers and operators, so that they can acquire insight to apply these techniques to the area of intrusion detection, and devise more effective intrusion detection models.

We propose a novel representation called Feature Interaction Descriptor (FIND) to capture high-level properties of object appearance by computing pairwise interactions of adjacent region-level features. In order to deal with pedestrian detection task, we employ localized oriented gradient histograms as region-level features and measure interactions between adjacent histogram elements with a suitable histogram-similarity function. The experimental results show that our descriptor improves upon HOG significantly and outperforms related high-level features such as GLAC and CoHOG.

This paper presents a commercial shot classification scheme combining well-designed visual and textual features to automatically detect TV commercials. To identify the inherent difference between commercials and general programs, a special mid-level textual descriptor is proposed, aiming to capture the spatio-temporal properties of the video texts typical of commercials. In addition, we introduce an ensemble-learning based combination method, named Co-AdaBoost, to interactively exploit the intrinsic relations between the visual and textual features employed.

This paper investigates the effect of several frequency modulation profiles on conducted-noise reduction in dc-dc converters with programmed switching controller. The converter is operated in variable frequency modulation regime. Twelve switching frequency modulation profiles have been studied. Some of the modulation data are prepared using MATLAB software, and others are generated online. Moreover, all the frequency profiles have been designed and implemented using FPGA and experimentally investigated. The experimental results show that the conducted-noise spreading depends on both the modulation sequence profile and the statistical characteristics of the sequence. A substantial part of the manufacturing cost of power converters for telecommunication applications involves designing filters to comply with the EMI limits. Considering this investigation significantly reduces the filter size.

Least-squares policy iteration is a useful reinforcement learning method in robotics due to its computational efficiency. However, it tends to be sensitive to outliers in observed rewards. In this paper, we propose an alternative method that employs the absolute loss for enhancing robustness and reliability. The proposed method is formulated as a linear programming problem which can be solved efficiently by standard optimization software, so the computational advantage is not sacrificed for gaining robustness and reliability. We demonstrate the usefulness of the proposed approach through a simulated robot-control task.

The phenomena of retrograde motion of arc in the atmosphere under transverse magnetic field were studied. AgSnO2 contacts were set in DC resistive and inductive circuits, respectively. The break voltage was 28 V, the current ranged from 1 to 5 A, and the magnetic flux density changed from 0 to 100 mT. A high speed camera and an oscilloscope were used to record time variations of arc images, voltages and currents, simultaneously. Different from previous experiment results, the arc motion showed three stages which was more obvious under larger magnetic flux density in inductive circuit. It was also found that the arc movement was closely related with the arc voltage. Explanation to the retrograde motion under such conditions was given.