High Altitude Platform Stations (HAPS) are recently considered as a green infrastructure to provide high speed multimedia services. The critical issue of HAPS is frequency sharing with satellite systems. Regulating antenna beam pattern using adaptive antenna schemes is one of means to facilitate the sharing with a space receiver for fixed satellite services on the uplink of a HAPS system operating in U bands. In this letter, we investigate antenna beam pattern characteristics of HAPS user terminals with various values of scan angles of main beam, null position angles, and null width.

A replacement of an expensive MgO protective layer with relatively inexpensive Lanthanum Hexa Boride (LaB6) has already been proposed. Since LaB6 is not transparent, unlike MgO, the LaB6 panel employs a long sustain gap structure. Since the sustain gap is 2.6 times larger than the distance between sustain and address electrodes, different driving methods from those of the conventional PDPs have to be adopted. For the driving technique of the sustain period, an application of delayed auxiliary pulses on A electrode and the overlap sustain pulse drive are proposed. Luminance degradation with higher sustain frequency driving can be compensated by use of a 2step sustain pulse driving. Low reset luminance and low address voltage are achieved with a square-ramp technique for the reset period. TV operation is successfully realized on AC PDP which incorporated the LaB6 cathodes.

MEMS storage devices are new non-volatile secondary storages that have outstanding advantages over magnetic disks. MEMS storage devices, however, are much different from magnetic disks in the structure and access characteristics in the following ways. They have thousands of heads called probe tips and provide the following two major access facilities: (1) flexibility : freely selecting a set of probe tips for accessing data, (2) parallelism: simultaneously reading and writing data with the set of probe tips selected. Due to these characteristics, it is nontrivial to find data placements that fully utilize the capability of MEMS storage devices. In this paper, we propose a simple logical model called the Region-Sector (RS) model that abstracts major characteristics affecting data retrieval performance, such as flexibility and parallelism, from the physical MEMS storage model. We also suggest heuristic data placement strategies based on the RS model. To show the usability of the RS model, we derive new data placements for relational data and two-dimensional spatial data by using these strategies. Experimental results show that the proposed data placements improve the data retrieval performance by up to 4.7 times for relational data and by up to 18.7 times for two-dimensional spatial data of approximately 320 Mbytes compared with those of existing data placements. Further, these improvements are expected to be more marked as the database size grows.

A basic and inevitable problem in estimating flow duration distribution arises from "censoring" (i.e., cutting off) the observed flow duration because of a finite measurement period. We extended the Kaplan-Meier method, which is used in the survival analysis field, and applied it to recover information on the flow duration distribution that was lost due to censoring. We show that the flow duration distribution from a short period of actual traffic data with censoring that was estimated using a Kaplan-Meier-based method can approximate well the flow duration distribution calculated from a sufficiently long period of actual traffic data.

Higher-order rewrite systems (HRSs) and simply-typed term rewriting systems (STRSs) are computational models of functional programs. We recently proposed an extremely powerful method, the static dependency pair method, which is based on the notion of strong computability, in order to prove termination in STRSs. In this paper, we extend the method to HRSs. Since HRSs include λ-abstraction but STRSs do not, we restructure the static dependency pair method to allow λ-abstraction, and show that the static dependency pair method also works well on HRSs without new restrictions.

Networking technologies have recently been evolving and network applications are now expected to support flexible composition of upper-layer network services, such as security, QoS, or personal firewall. We propose a multi-platform framework called FreeNA* that extends existing applications by incorporating the services based on user definitions. This extension does not require users to modify their systems at all. Therefore, FreeNA is valuable for experimental system usage. We implemented FreeNA on both Linux and Microsoft Windows operating systems, and evaluated their functionality and performance. In this paper, we describe the design and implementation of FreeNA including details on how to insert network services into existing applications and how to create services in a multi-platform environment. We also give an example implementation of a service with SSL, a functionality comparison with relevant systems, and our performance evaluation results. The results show that FreeNA offers finer configurability, composability, and usability than other similar systems. We also show that the throughput degradation of transparent service insertion is 2% at most compared with a method of directly inserting such services into applications.

This paper describes the architecture of an integrated platform developed for improving the development efficiency of system LSIs built into digital consumer electronics equipment such as flat-panel TVs and optical disc recorders. The reason for developing an integrated platform is to improve the development efficiency of system LSIs that serve the principal functions of the said equipment. The key is to build a common interface between each software layer, with the system LSI located at the lowest layer. To make this possible, the hardware architecture of the system LSI is divided into five blocks according to its main functionality. In addition, a middleware layer is placed over the operating system to improve the ease of porting old applications and developing new applications in the higher layer. Based on this platform, a system LSI called UniPhierTM has been developed and used in 156 product families of digital consumer electronics equipment (as of December 2008).

Compiler is the most important supporting tool to facilitate the use of reconfigurable computing architecture (RCA). In this paper, a template-based compiler framework is proposed. This compiler can synthesize the executables for RCA from native high-level programming language source code directly. It supports to generate run-time dynamic configuration context. And it is capable to generate both full configuration context and partial configuration context. Experimental results show that the executables generated by the proposed compiler can achieve better execution performance and smaller configuration context size than previous compilers. Moreover, this compiler does not require the programmer to have any extra knowledge about the hardware architecture of RCA.

SoC has driven the evolution of embedded systems or consumer electronics. Multi-core/multi-IP is the key technology to integrate many functions on a SoC for future embedded applications. In this paper, the transition of SoC and its required functions for cellular phones as an example is described. And the state-of-the-art multi-core technology of homogeneous type and heterogeneous type are shown. When many cores and IPs are integrated on a chip, collaboration between cores and IPs becomes important to meet requirement. To realize it, "MPSoC Platform" concept and elementary technology for this platform is described.

How to minimize the number of mirroring resources under a QoS constraint (resource minimization problem) is an important issue in content delivery networks. This paper proposes a novel approach that takes advantage of the parallelism of dynamically reconfigurable processors (DRPs) to solve the resource minimization problem, which is NP-hard. Our proposal obtains the optimal solution by running an exhaustive search algorithm suitable for DRP. Greedy algorithms, which have been widely studied for tackling the resource minimization problem, cannot always obtain the optimal solution. The proposed method is implemented on an actual DRP and in experiments reduces the execution time by a factor of 40 compared to the conventional exhaustive search algorithm on a Pentium 4 (2.8 GHz).

This paper proposes a parallelized DVC framework that treats each bitplane independently to reduce the decoding time. Unfortunately, simple parallelization generates inaccurate bit probabilities because additional side information is not available for the decoding of subsequent bitplanes, which degrades encoding efficiency. Our solution is an effective estimation method that can calculate the bit probability as accurately as possible by index assignment without recourse to side information. Moreover, we improve the coding performance of Rate-Adaptive LDPC (RA-LDPC), which is used in the parallelized DVC framework. This proposal selects a fitting sparse matrix for each bitplane according to the syndrome rate estimation results at the encoder side. Simulations show that our parallelization method reduces the decoding time by up to 35[%] and achieves a bit rate reduction of about 10[%].

An approach to image thresholding based on the plausibility of object and background regions by adopting a co-occurrence matrix and category utility is presented. The effectiveness of the proposed method is shown through the experimental results tested on several images and compared with conventional methods.

In modern VLSI physical design, huge integration scale necessitates hierarchical design and IP reuse to cope with design complexity. Besides, interconnect delay becomes dominant to overall circuit performance. These critical factors require some modules to be placed along designated boundaries to effectively facilitate hierarchical design and interconnection optimization related problems. In this paper, boundary constraints of general floorplan are solved smoothly based on the novel representation Single-Sequence (SS). Necessary and sufficient conditions of rooms along specified boundaries of a floorplan are proposed and proved. By assigning constrained modules to proper boundary rooms, our proposed algorithm always guarantees a feasible SS code with appropriate boundary constraints in each perturbation. Time complexity of the proposed algorithm is O(n). Experimental results on MCNC benchmarks show effectiveness and efficiency of the proposed method.

In this paper, we focus on resource allocation schemes for minimizing the energy consumption of subscriber stations (SSs) in uplink flows of the IEEE 802.16 OFDMA systems. The resource allocation schemes assign subcarriers, powers, and data rates to each SS based on the measured signal to noise ratio (SNR) of the uplink channel and predefined modulation and coding scheme as system parameters. Previous research efforts to optimize resource allocation focus on the rate and throughput maximizations, and develop suboptimal heuristic algorithms. However, this paper intends to reduce the energy consumption of SSs by considering the relationship between energy efficiency and resource allocation. In order to clearly formulate the relationship, we use the Multiple Choice Knapsack (MCK) problem, which is proved to be an NP-hard problem. We propose two heuristic schemes to solve the NP-hard problem, which adaptively use the modulation and coding scheme, defined in the IEEE 802.16 OFDMA systems to minimize the required transmission power of each SS. Our simulation results show that the proposed schemes can reduce the energy consumption by up to 53% compared to the channel state information (CSI) scheme, which determines the modulation and coding level only considering the channel state information.

The purpose of this paper is to investigate the possible impact of cellular phones' signals on implantable cardiac pacemakers in elevators. This is achieved by carrying out precise numerical simulations based on the Finite-Difference-Time-Domain method to examine the electromagnetic fields in elevator models. In order to examine the realistic and complicated situations where humans are present in the elevator, we apply the realistic homogeneous human phantom and cellular radios operating in the frequency bands 800 MHz, 1.5 GHz and 2 GHz. These computed results of field strength inside the elevator are compared with a certain reference level determined from the experimentally obtained maximum interference distance of implantable cardiac pacemakers. This enables us to carry out a quantitative evaluation of the EMI risk to pacemakers by cellular radio transmission. The results show that for the case when up to 5 mobile radio users are present in the elevator model used, there is no likelihood of pacemaker malfunction for the frequency bands 800 MHz, 1.5 GHz and 2 GHz.

Due to the recent increase in electronic devices mounted on automobiles, a large number of connectors, especially low-cost tin plated connectors are being used. As a result, their contact reliability has become problematic. Furthermore, for the connectors which are subjected to fretting wear caused by heat cycle and vibrations, the contact resistance increases because of wear of tin and deposition of oxides, which generates problems of poor contact. This study is intended to analyze the change in contact resistance of tin plated connectors from the start of fretting wear to the end of their lifetime from the viewpoint of practical reliability, and to observe the trace and the characteristics of fretting wear microscopically. This study found that wear and oxidation of tin plated connectors start immediately with fretting wear, and thus accumulation of abrasion powder on fretting areas causes connectors to reach to the end of their useful lifetime quickly. Especially, it was demonstrated that amplitude of fretting has a considerable influence on a connector's lifetime. It is made clear that air-tightness, so-called "gas-tight" of tin in a fretting area influences fretting wear considerably.

Electrical contacts are the most important parts of electrical circuits, and many reliability problems of the circuits are related to contact failure. The contact resistance is one of the important factors for assessing connector reliability, and thus the prediction of contact resistance is essential to designing electrical terminals. In this study, embossments, each 1 mm to 3 mm in radius, were brought into contact with flat planes to simulate the point of contact on a terminal, and the contact resistance was measured using a four-probe method under a load up to 40 N. Copper alloy samples, each plated with tin or silver and having an embossment of 1 mm to 3 mm in radius, were used and the visually clear indentations resulting from the embossment to plane contact were measured to determine their areas. Since the contact resistance is dependent on the contact area, an FEM analysis must be carried out to determine the contact areas correctly. In this paper, an elasto-plastic FEM analysis was performed taking the plating layers into account, and a method was established to make precise determination of the contact areas for different shapes of contacts and loads. The resultant contact areas were used to calculate the contact resistance, which showed a good agreement with experimental results. It was established that the load-resistance curves can be predicted on the basis of the shapes of the contacts as well as plating.

In this paper, a novel eight-way Ka-band spatial power combining structure based on SIW/HMSIW is presented and studied. The power-combining structure is realized by transitions between HMSIW and parallel multiport planar microstrip lines. The power combiner is designed and fabricated in 33.5-35 GHz. The measured results show a good agreement with simulation and a combining efficiency of 72% is achieved at 34.3 GHz.

This study involves implementing an intelligent controller using the fuzzy control algorithm to minimize cold weld and splash in inverter AC spot welding. This study presents an experimental curve of a welding output current and the maximum value of the Instantaneous Heating Rate (IHRmax) using the contact diameter of an electrode as the parameter. It also presents the experimental curve of a welding output current and the slope (S) of the instantaneous dynamic resistance using the instantaneous contact area of an electrode as the parameter. To minimize cold weld and splash, this study proposes an intelligent controller that controls the optimum welding current in real time by estimating the contact diameter of an electrode and the contact area of the initial welding part.

This letter proposes a high-performance single-sided horn-shaped tapered bowtie antenna which is compact and covers more than the whole UWB frequency band. This design implements a bowtie radiating element and tapered strip-line feeder element on a single-sided dielectric substrate, which offers a measured return loss of less than -10 dB over the whole UWB frequency band of 3.0-10.8 GHz. The measured radiation pattern is bi-directional with consistent gain over the above frequency band. This compact-size design shows much enhanced performance, compared to the previously reported antenna, which is useful for UWB radar and communication applications.