Over roughly the past decade, the lightwave-research community has converged upon a broad architectural vision of the emerging national-scale core network. The vision has been that of a transparent, reconfigurable, wavelength-routed network, in which signals propagate from source to destination through a sequence of intervening nodes without optoelectronic conversion. Broad benefits have been envisioned. Despite the spare elegance of this vision, it is steadily becoming clear that due to the performance, cost, management, and multivendor-interoperability obstacles attending transparency, the needs of civilian communications will not drive the core network to transparency on anything like a national scale. Instead, they will drive it to 'opaque' form, with critical reliance on optoelectronic conversion via transponders. Transponder-based network architectures in fact not only offer broad transmission and manageability benefits. They also make networking at the optical layer possible by offering to the nodes managed and performance-engineered standard-interface signals that can then be reconfigured for provisioning and restoration purposes by optical-layer elements. Because of this, the more pressing challenges in lightwave networking are steadily shifting towards the mechanisms that will be used for provisioning and restoration. Among these are mechanisms based on free-space micromachined optical crossconnects. We describe recent progress on these new devices and the architectures into which they fit, and summarize the reasons why they appear to be particularly well-matched to the task of provisioning and restoring opaque multiwavelength core long-haul networks.

Over roughly the past decade, the lightwave-research community has converged upon a broad architectural vision of the emerging national-scale core network. The vision has been that of a transparent, reconfigurable, wavelength-routed network, in which signals propagate from source to destination through a sequence of intervening nodes without optoelectronic conversion. Broad benefits have been envisioned. Despite the spare elegance of this vision, it is steadily becoming clear that due to the performance, cost, management, and multivendor-interoperability obstacles attending transparency, the needs of civilian communications will not drive the core network to transparency on anything like a national scale. Instead, they will drive it to 'opaque' form, with critical reliance on optoelectronic conversion via transponders. Transponder-based network architectures in fact not only offer broad transmission and manageability benefits. They also make networking at the optical layer possible by offering to the nodes managed and performance-engineered standard-interface signals that can then be reconfigured for provisioning and restoration purposes by optical-layer elements. Because of this, the more pressing challenges in lightwave networking are steadily shifting towards the mechanisms that will be used for provisioning and restoration. Among these are mechanisms based on free-space micromachined optical crossconnects. We describe recent progress on these new devices and the architectures into which they fit, and summarize the reasons why they appear to be particularly well-matched to the task of provisioning and restoring opaque multiwavelength core long-haul networks.

WDM transmission experiments over cascaded sections of optical links including wavelength converting 2R-transponders have been carried out in a loop testbed. Using dispersion compensated links and simple direct modulated transponder lasers, up to 11 cascaded crossconnects and 1750 km trunk lines have been bridged with 2.5 Gbit/s NRZ signals. The limitations are given mainly due to the accumulated jitter as it is shown by numerical simulations. The results indicate, that 2R-transponders are a useful approach to a flexible WDM network design using bitrate-transparent wavelength conversion.

This paper proposes an adaptive noise canceller with low signal-distortion in the presence of crosstalk. The proposed noise canceller has two pairs of cross-coupled adaptive filters, each of which consists of the main filter and a sub filter. The signal-to-noise ratios (SNRs) of the primary and the reference signals are estimated by the sub filters. To reduce signal distortion at the output of the adaptive noise canceller, the step sizes for coefficient adaptation in the main filters are controlled according to the estimated SNRs. Computer simulation results show that the proposed noise canceller reduces signal distortion in the output signal by up to 15 dB compared to the conventional noise canceller.

This paper presents a new technique for the synthesis of sets of low-peak sequences exhibiting low peak cross correlation. The sequences also have flat power spectra and are suitable for many applications requiring such sets of uncorrelated pseudo-white-noise sources. This is a new application of the ta-sequence (trigonometric function aliasing sequence), which itself is a very new technique that uses the well-known "Reed-Solomon code" or "One coincident code" to generate these sets of low-peak-factor pseudo-white-noise exhibiting low peak cross correlation. The ta sequence method presented here provides the means for generating various sequences at the lengths required for such applications as system measurement (needing uncorrelated test signals), pseudo-noise synthesis (for spread spectrum communication), and audio signal processing for sound production (for enhancing spatial imagery in stereo signals synthesized from mono sources) and sound reproduction (for controlling unwanted interference effects in multiple-loudspeaker arrays).

WDM transmission experiments over cascaded sections of optical links including wavelength converting 2R-transponders have been carried out in a loop testbed. Using dispersion compensated links and simple direct modulated transponder lasers, up to 11 cascaded crossconnects and 1750 km trunk lines have been bridged with 2.5 Gbit/s NRZ signals. The limitations are given mainly due to the accumulated jitter as it is shown by numerical simulations. The results indicate, that 2R-transponders are a useful approach to a flexible WDM network design using bitrate-transparent wavelength conversion.

A novel dual-band internal antenna similar in size to the single-band internal antenna for cellular handsets is proposed. Our approach to realize a small and low-profile dual-band internal antenna is to use the dominant mode (TM10 mode) and the higher-order mode (TM30 mode). In order to use this approach for recent dual-band cellular systems it is necessary to lower the resonant frequency of the higher-order mode (TM30 mode). This motivated our development of a new antenna configuration with a slot on the radiation element of a quarter-wavelength shorted microstrip antenna to lower the resonant frequency of the TM30 mode. In this paper, the experimental and the analytical results for this antenna are presented. In the results, by adjusting the location and the length of the slot, the dual-frequency operation can be achieved with the frequency ratio (TM30 mode/TM10 mode) from 2 to 3. In addition, the enhancement of bandwidth is presented.

Microstrip leaky-wave antenna fed by an aperture-coupled microstrip operating at K-band is presented. Using the aperture-coupled microstrip as a feeding structure can fully exploit the wideband characteristic of the microstrip leaky-wave antenna. The dimensions of the antenna are obtained from the calculation of the propagation characteristics. Measurement shows a bandwidth of 22% for VSWR < 2:1 and a peak power gain of 12 dBi at 22 GHz for one element. Four-element array is developed with a gain of 18.7 dBi and the frequency-scanning feature is exhibited. The waveguide model is verified by measuring the 3-D radiation pattern of the microstrip leaky-wave array.

This paper presents a novel four-sector shaped-beam antenna suitable for base station antennas in 60-GHz wireless local area networks (LANs). The antenna has a plateau configuration, whose four side walls have four linearly arranged microstrip antennas. Each trapezoidal facet excites a shaped beam in the elevation plane in order to meet link-budget requirement between base station and remote terminal, taking account of directional patters of remote terminal antennas. Low-loss curved microstrip-line is applied to connect the three-dimensional antennas with active circuits mounted on a flat carrier plate. This antenna has been adopted as the base station antenna in 60-GHz wireless LANs. The first-stage transmission experiment confirms the usefulness of shaped-beam antennas in the 60-GHz band.

This paper presents a technique for miniaturization of microstrip line and coplanar waveguide for microwave integrated circuits by using airbridge technology. A theoretical analysis is given by a combination of the conformal mapping technique and the variational principle. Numerical results demonstrate significant effects on size reduction as well as wide range of the characteristic impedance variation due to the airbridge.

The full-band Monte Carlo technique is currently the most accurate device simulation method, but its usefulness is limited because it is very CPU intensive. This work describes efficient algorithms in detail, which raise the efficiency of the full-band Monte Carlo method to a level where it becomes applicable in the device design process beyond exemplary simulations. The k-space is discretized with a nonuniform tetrahedral grid, which minimizes the discretization error of the linear energy interpolation and memory requirements. A consistent discretization of the inverse mass tensor is utilized to formulate efficient transport parameter estimators. Particle scattering is modeled in such a way that a very fast rejection technique can be used for the generation of the final state eliminating the main cause of the inefficiency of full-band Monte Carlo simulations. The developed full-band Monte Carlo simulator is highly efficient. For example, in conjunction with the nonself-consistent simulation technique CPU times of a few CPU minutes per bias point are achieved for substrate current calculations. Self-consistent calculations of the drain current of a 60nm-NMOSFET take about a few CPU hours demonstrating the feasibility of full-band Monte Carlo simulations.

A new IC interconnect transmission line parameter determination methodology and a novel fast simulation technique for non-uniform transmission lines are presented and verified. The capacitance parameter is a strong function of a shielding effect between the layers, while silicon substrate has a substantial effect on inductance parameter. Thus, they are taken into account to determine the parameters. Then the virtual straight-line-based per unit length parameters are determined in order to perform the fast transient simulation of the non-uniform transmission lines. It was shown that not only the inductance effect due to a silicon substrate but also the shielding effect between the layers are too significant to be neglected. Further, a model order reduction technique is integrated into Berkeley SPICE in order to demonstrate that the virtual straight-line-based per-unit-length parameters can be efficiently employed for the fast transient response simulation of the complicated multi-layer interconnect structures. Since the methodology is very efficient as well as accurate, it can be usefully employed for IC CAD tools of high-performance VLSI circuit design.

The rosette-scanning infrared seeker (RSIS) is a tracker that a single infrared detector scans the total field of view (TFOV) in a rosette pattern, and then produces 2D image about a target. Since the detected image has various shapes in accordance with the target position in the TFOV, it is difficult to determine a precise target position from the obtained image. In order to track this type of target, therefore, we propose an efficient tracking method using the K-means algorithm (KMA). The KMA, which classifies image clusters and calculates their centers, is used to cope with an countermeasure (CM) such as an IR flare. To evaluate the performance of the RSIS using the KMA dynamically, we simulate the RSIS in the various conditions, and discuss the tracking results.

We propose an H-plane manifold-type triplexer with closely arranged junctions. Broadband characteristics for each bands are obtained by arranging filters closely near the end of the common waveguide. Three fundamental and sufficient parameters are introduced for numerical optimizations to determine the configuration of the broadband triplexer. The configuration including closely arranged junctions requires an generalized scattering matrix (GS matrix) of an asymmetric cross junction to simulate and design. We expand the mode matching technique (MMT) to be able to analyze this kind of discontinuities by joining two asymmetric steps discontinuities to a symmetric cross junction. This is suitable expressions for numerical calculations. The characteristics of the whole triplexer are obtained by cascading GS matrices of the corresponding discontinuities. The experimental results of the fabricated triplexer were compared with the simulated data, and the results agree well with the simulated one. The characteristics of the fabricated triplexer satisfy the request of the broad band operation and high power-handling capability.

The formulation of the wall admittance of a circular microstrip antenna by the spectral domain method is presented. The circular microstrip antenna is calculated using the cavity model. The electromagnetic fields within the antenna cavity are determined from the impedance boundary condition at the side aperture. The contribution from the region outside the antenna is taken into account by the wall admittance. The wall admittance is defined by the magnetic field produced by the equivalent magnetic current at the aperture. The magnetic field is calculated by the spectral domain method. The wall admittances obtained by this method are compared with the results calculated by Shen. The calculated input impedances of the microstrip antenna agree fairly well with the experimental data for the substrate thickness of up to 0.048λg. The formulation of wall admittance presented here is easily applicable to arbitrarily shaped microstrip antennas.

An Acoustic echo canceller has problems adaptating under noisy or double-talk conditions. The adaptation process requires a precise identification of the temporarily changed room impulse response. To do this, both minimizing the step size parameter of the Least Mean Square (LMS) method to be as small as possible and giving up on updating the adaptive filter coefficients have been considered. This paper describes an adaptive cross-spectral technique that is robust to adaptive filtering under noisy or double-talk conditions and for colored signals such a speech signal. The cross-spectral technique was originally developed to measure the impulse response in a linear system. Here we apply in the adaptive cross-spectral technique to solve the acoustic echo cancelling problem. This cross-spectral technique takes the ensemble average of the cross spectrum between input and error signals and the averaged cross spectrum is divided by the averaged power spectrum of the input signal to update the filter coefficients. We have confirmed that the echo signal is suppressed by about 15 dB even under double-talk conditions. We also explain that this method has a systematic error due to using a short time block for estimating the room impulse response. Then we investigate overlapping every last half block by the following first half block in order to reduce the effect of the systematic error. Finally, we compare our method with the Frequency-domain Block LMS (FBLMS) method because both methods are implemented in the frequency domain using a short time block.

This paper proposes a method of improving the accuracy of the attenuation constant estimate obtained by using the cross-spectral technique. In the cross-spectral technique, the envelope of the estimated impulse response is deformed due to the use of a time window. As a result, the estimated impulse response decays more rapidly than the real impulse response does, and the attenuation constant obtained by the estimated impulse response becomes larger than the real value. This paper first describes how the attenuation constant changes in the process of impulse response estimation. Next, we propose a method of improving the accuracy of the estimation. The effect of the proposed method is confirmed by computer simulation.

This paper describes a distributed amplifier IC module and a distributed 1 : 2 signal distributor IC module for 40-Gbit/s optical transmission systems. These ICs were designed by the distributed circuit and inverted-microstrip-line design technique and fabricated using 0. 1-µm-gate-length GaAs MESFETs with a multilayer interconnection structure. These were mounted on a thin film multilayer substrate in a chip-size-cavity package by means of a flip-chip-bonding technique that uses transferred microsolder bumps. The amplifier module achieved a 3-dB bandwidth of more than 50 GHz and a gain of 8 dB. The 3-dB bandwidth of a 1 : 2 signal distributor module was 40 GHz and the loss was 2 dB. These modules were demonstrated at 40 Gbit/s and clear eye openings were confirmed.

An optical receiver with a saturated electrical amplifier is studied for signal light that is distorted due to the use of a gain-saturated semiconductor optical amplifier or homowavelength crosstalk light. It is shown that less penalty is induced in a receiver with a DC-coupled saturated amplifier than in one with a linear amplifier, in a practical situation where the decision threshold is fixed at a value optimized for a back-to-back signal. The result suggests that a receiver with a saturated amplifier or a limitter is preferable to an automatic gain control circuit for detecting distorted signal lights.

To enhance the extinction ratio (ER) of NRZ-to-inverted-RZ converter based on cross-gain compression of a semiconductor optical amplifier (SOA), a modified terahertz optical asymmetric demultiplexer (TOAD) is cascaded. ER is improved from 1.6-6.7 dB to 5.4-14.5 dB, depending on the intensity of input optical NRZ signal. The proposed NRZ-to-inverted-RZ converter enhances and regulates ER to a high value (14.5 dB) for very wide optical NRZ signal intensity range.