Renyuan ZHANG Takashi NAKADA Yasuhiko NAKASHIMA
A programmable analog calculation unit (ACU) is designed for vector computations in continuous-time with compact circuit scale. From our early study, it is feasible to retrieve arbitrary two-variable functions through support vector regression (SVR) in silicon. In this work, the dimensions of regression are expanded for vector computations. However, the hardware cost and computing error greatly increase along with the expansion of dimensions. A two-stage architecture is proposed to organize multiple ACUs for high dimensional regression. The computation of high dimensional vectors is separated into several computations of lower dimensional vectors, which are implemented by the free combination of several ACUs with lower cost. In this manner, the circuit scale and regression error are reduced. The proof-of-concept ACU is designed and simulated in a 0.18μm technology. From the circuit simulation results, all the demonstrated calculations with nine operands are executed without iterative clock cycles by 4960 transistors. The calculation error of example functions is below 8.7%.
Karthikeyan PANJAPPAGOUNDER RAJAMANICKAM Sakthivel PERIYASAMY
Background subtraction algorithms generate a background model of the monitoring scene and compare the background model with the current video frame to detect foreground objects. In general, most of the background subtraction algorithms fail to detect foreground objects when the scene illumination changes. An entropy based background subtraction algorithm is proposed to address this problem. The proposed method adapts to illumination changes by updating the background model according to differences in entropy value between the current frame and the previous frame. This entropy based background modeling can efficiently handle both sudden and gradual illumination variations. The proposed algorithm is tested in six video sequences and compared with four algorithms to demonstrate its efficiency in terms of F-score, similarity and frame rate.
Noboru OSAWA Shinsuke IBI Koji IGARASHI Seiichi SAMPEI
This paper proposed an iterative soft interference canceller (IC) referred to as turbo equalizer for the self-coherent detection, and extrinsic information transfer (EXIT) chart based irregular low density parity check (LDPC) code optimization for the turbo equalizer in optical fiber short-reach transmissions. The self-coherent detection system is capable of linear demodulation by a single photodiode receiver. However, the self-coherent detection suffers from the interference induced by signal-signal beat components, and the suppression of the interference is a vital goal of self-coherent detection. For improving the error-free signal detection performance of the self-coherent detection, we proposed an iterative soft IC with the aid of forward error correction (FEC) decoder. Furthermore, typical FEC code is no longer appropriate for the iterative detection of the turbo equalizer. Therefore, we designed an appropriate LDPC code by using EXIT chart aided code design. The validity of the proposed turbo equalizer with the appropriate LDPC is confirmed by computer simulations.
In this paper, to make asynchronous circuit design easy, we propose a conversion method from synchronous Register Transfer Level (RTL) models to asynchronous RTL models with bundled-data implementation. The proposed method consists of the generation of an intermediate representation from a given synchronous RTL model and the generation of an asynchronous RTL model from the intermediate representation. This allows us to deal with different representation styles of synchronous RTL models. We use the eXtensible Markup Language (XML) as the intermediate representation. In addition to the asynchronous RTL model, the proposed method generates a simulation model when the target implementation is a Field Programmable Gate Array and a set of non-optimization constraints for the control circuit used in logic synthesis and layout synthesis. In the experiment, we demonstrate that the proposed method can convert synchronous RTL models specified manually and obtained by a high-level synthesis tool to asynchronous ones.
Fei GUO Yuan YANG Yang XIAO Yong GAO Ningmei YU
Currently, visual perceptions generated by visual prosthesis are low resolution with unruly color and restricted grayscale. This severely restricts the ability of prosthetic implant to complete visual tasks in daily scenes. Some studies explore existing image processing techniques to improve the percepts of objects in prosthetic vision. However, most of them extract the moving objects and optimize the visual percepts in general dynamic scenes. The application of visual prosthesis in daily life scenes with high dynamic is greatly limited. Hence, in this study, a novel unsupervised moving object segmentation model is proposed to automatically extract the moving objects in high dynamic scene. In this model, foreground cues with spatiotemporal edge features and background cues with boundary-prior are exploited, the moving object proximity map are generated in dynamic scene according to the manifold ranking function. Moreover, the foreground and background cues are ranked simultaneously, and the moving objects are extracted by the two ranking maps integration. The evaluation experiment indicates that the proposed method can uniformly highlight the moving object and keep good boundaries in high dynamic scene with other methods. Based on this model, two optimization strategies are proposed to improve the perception of moving objects under simulated prosthetic vision. Experimental results demonstrate that the introduction of optimization strategies based on the moving object segmentation model can efficiently segment and enhance moving objects in high dynamic scene, and significantly improve the recognition performance of moving objects for the blind.
Mototsugu HAMADA Tadahiro KURODA
This paper describes transmission line couplers for non-contact connecters. Their characteristics are formulated in closed forms and design methodologies are presented. As their applications, three different types of transmission line couplers, two-fold transmission line coupler, single-ended to differential conversion transmission line coupler, and rotatable transmission line coupler are reviewed.
Sohee LIM Seongwook LEE Jung-Hwan CHOI Jungmin YOON Seong-Cheol KIM
This paper presents an interference suppression and signal restoration technique that can create the clean signals required by automotive frequency-modulated continuous wave radar systems. When a radar signal from another radar system interferes with own transmitted radar signal, the target detection performance is degraded. This is because the beat frequency corresponding to the target cannot be estimated owing to the increase in the noise floor. In this case, advanced weighted-envelope normalization or wavelet denoising can be used to mitigate the effect of the interference; however, these methods can also lead to the loss of the desired signal containing the range and velocity information of the target. Therefore, we propose a method based on an autoregressive model to restore a signal damaged by mutual interference. The method uses signals that are not influenced by the interference to restore the signal. In experiments conducted using two different automotive radar systems, our proposed method is demonstrated to effectively suppress the interference and restore the desired signal. As a result, the noise floor resulting from the mutual interference was lowered and the beat frequency corresponding to the desired target was accurately estimated.
Ryosuke OZAKI Tsuneki YAMASAKI
In this paper, we propose a new technique for the transient scattering problem of periodically arrayed dispersion media for the TE case by using a combination of the Fourier series expansion method (FSEM) and the fast inversion Laplace transform (FILT) method, and analyze the pulse response for various widths of the dispersion media. As a result, we clarified the influence of the dispersion media with an air region on the resulting waveform.
Zheng FANG Tieyong CAO Jibin YANG Meng SUN
Salient region detection is a fundamental problem in computer vision and image processing. Deep learning models perform better than traditional approaches but suffer from their huge parameters and slow speeds. To handle these problems, in this paper we propose the multi-feature fusion network (MFFN) - a efficient salient region detection architecture based on Convolution Neural Network (CNN). A novel feature extraction structure is designed to obtain feature maps from CNN. A fusion dense block is used to fuse all low-level and high-level feature maps to derive salient region results. MFFN is an end-to-end architecture which does not need any post-processing procedures. Experiments on the benchmark datasets demonstrate that MFFN achieves the state-of-the-art performance on salient region detection and requires much less parameters and computation time. Ablation experiments demonstrate the effectiveness of each module in MFFN.
This paper presents a rigorous analysis of the electromagnetic scattering and transmission of misaligned dual metallic grating screens. The Fourier transform and the mode-matching technique are employed to obtain an analytical solution. Numerical results show that misaligned dual metal grating screens exhibit asymmetric scattering and transmission properties with respect to the scattering and transmission angles. Parametric studies are conducted in terms of the lateral displacement and vertical distance between the dual metallic grating screens. For validation, the proposed method is compared with a numerical simulation and good agreement has been achieved.
Linna WEI Xiaoxiao SONG Xiao ZHENG Xuangou WU Guan GUI
With the existing of coverage holes, the Quality of Service (such as event response, package delay, and the life time et al.) of a Wireless Sensor Network (WSN) may become weaker. In order to recover the holes, one can locate them by identifying the boundary nodes on their edges. Little effort has been made to distinguish the boundary nodes in a model where wireless sensors are randomly deployed on a three-dimensional surface. In this paper, we propose a distributed method which contains three steps in succession. It first projects the 1-hop neighborhood of a sensor to the plane. Then, it sorts the projected nodes according to their angles and finds out if there exists any ring formed by them. At last, the algorithm validates a circle to confirm that it is a ring surrounding the node. Our solution simulates the behavior of rotating a semicircle plate around a sensor under the guidance of its neighbors. Different from the existing results, our method transforms a three-dimensional problem into a two-dimensional one and maintaining its original topology, and it does not rely on any complex Hamiltonian Cycle finding to test the existence of a circle in the neighborhood of a sensor. Simulation results show our method outperforms others at the correctness and effectiveness in identifying the nodes on the edges of a three-dimensional WSN.
A 3Gbps/lane transmission buffer chip including a high-speed mode detector is proposed for a field-programmable gate array (FPGA)-based frame generator supporting the mobile industry processor interface (MIPI) D-PHY version 1.2. It performs 1-to-3 repeat while buffering low voltage differential signaling (LVDS) or scalable low voltage signaling (SLVS) to SLVS.
Minghao TANG Yuan ZONG Wenming ZHENG Jisheng DAI Jingang SHI Peng SONG
Micro-expression is one type of special facial expressions and usually occurs when people try to hide their true emotions. Therefore, recognizing micro-expressions has potential values in lots of applications, e.g., lie detection. In this letter, we focus on such a meaningful topic and investigate how to make full advantage of the color information provided by the micro-expression samples to deal with the micro-expression recognition (MER) problem. To this end, we propose a novel method called color space fusion learning (CSFL) model to fuse the spatiotemporal features extracted in different color space such that the fused spatiotemporal features would be better at describing micro-expressions. To verify the effectiveness of the proposed CSFL method, extensive MER experiments on a widely-used spatiotemporal micro-expression database SMIC is conducted. The experimental results show that the CSFL can significantly improve the performance of spatiotemporal features in coping with MER tasks.
Yuto FUTAMURA Katsunori MAKIHARA Akio OHTA Mitsuhisa IKEDA Seiichi MIYAZAKI
We have fabricated multiple-stacked Si quantum dots (QDs) with and without Ge core embedded in a SiO2 network on n-Si(100) and studied their field electron emission characteristics under DC bias application. For the case of pure Si-QD stacks with different dot-stack numbers, the average electric field in dot-stacked structures at which electron emission current appeared reached minimum value at a stack number of 11. This can be attributed to optimization of the electron emission due to enhanced electric field concentration in the upper layers of the dot-stacked structures and reduction of the electron injection current from the n-Si substrate, with an increased stack number. We also found that, by introducing Ge core into Si-QDs, the average electric field for the electron emission can be reduced below that from pure Si-QDs-stacked structures. This result implies that the electric field is more concentrated in the upper Si-QDs with Ge core layers due to deep potential well for holes in the Ge core.
A multi-carrier and blind shift-frequency jamming(MCBSFJ) against the pulsed compression radar with order-statistic (OS) constant false alarm rate (CFAR) detector is proposed. Firstly, according to the detection principle of the OS-CFAR detector, the design requirements for jamming signals are proposed. Then, some key parameters of the jamming are derived based on the characteristics of the OS-CFAR detector. As a result, multiple false targets around the real target with the quantity, amplitude and space distribution which can be controlled are produced. The simulation results show that the jamming method can reduce the detection probability of the target effectively.
Ming LI Li SHI Xudong CHEN Sidan DU Yang LI
The large computational complexity makes stereo matching a big challenge in real-time application scenario. The problem of stereo matching in a video sequence is slightly different with that in a still image because there exists temporal correlation among video frames. However, no existing method considered temporal consistency of disparity for algorithm acceleration. In this work, we proposed a scheme called the dynamic disparity range (DDR) to optimize matching cost calculation and cost aggregation steps by narrowing disparity searching range, and a scheme called temporal cost aggregation path to optimize the cost aggregation step. Based on the schemes, we proposed the DDR-SGM and the DDR-MCCNN algorithms for the stereo matching in video sequences. Evaluation results showed that the proposed algorithms significantly reduced the computational complexity with only very slight loss of accuracy. We proved that the proposed optimizations for the stereo matching are effective and the temporal consistency in stereo video is highly useful for either improving accuracy or reducing computational complexity.
We have comprehensively studied by numerical simulation high power transmission properties through single mode fiber for non-repeatered system application. We have clearly captured bit error rates (BERs) of digital coherent signal exhibit specific floor levels, depending on transmitter powers, due to fiber nonlinearity. If the maximum transmitter powers are defined as the powers at which BER floor levels are 1.0×10-2 without error correction, those are found to be approximately +20.4dBm, +14.8dBm and +10.6dBm, respectively, for single-channel 120Gbps DP-QPSK, DP-16QAM and DP-64QAM formats in large-core and low-loss single-mode silica fibers. In the simulations, we set fiber lengths over 100km, which is much longer than the effective fiber length, thus the results are applicable to any of long-length non-repeatered systems. We also show that the maximum transmitter powers gradually decrease in logarithmic feature with the increase of the number of DWDM channels. The channel number dependence is newly shown to be almost independent on the modulation format. The simulated results have been compared with extended Gaussian-Noise (GN) model with introducing adjustment parameters, not only to confirm the validity of the results but to explore possible new analytical modeling for non-repeatered systems.
Seong Jin CHOE Ju Sang LEE Sung Sik PARK Sang Dae YU
This paper presents an ultra-low-power class-AB bulk-driven operational transconductance amplifier operating in the subthreshold region. Employing the partial positive feedback in current mirrors, the effective transconductance and output voltage swing are enhanced considerably without additional power consumption and layout area. Both traditional and proposed OTAs are designed and simulated for a 180 nm CMOS process. They dissipate an ultra low power of 192 nW. The proposed OTA features not only a DC gain enhancement of 14 dB but also a slew rate improvement of 200%. In addition, the improved gain leads to a 5.3 times wider unity-gain bandwidth than that of the traditional OTA.
Ruicong ZHI Hairui XU Ming WAN Tingting LI
Facial micro-expression is momentary and subtle facial reactions, and it is still challenging to automatically recognize facial micro-expression with high accuracy in practical applications. Extracting spatiotemporal features from facial image sequences is essential for facial micro-expression recognition. In this paper, we employed 3D Convolutional Neural Networks (3D-CNNs) for self-learning feature extraction to represent facial micro-expression effectively, since the 3D-CNNs could well extract the spatiotemporal features from facial image sequences. Moreover, transfer learning was utilized to deal with the problem of insufficient samples in the facial micro-expression database. We primarily pre-trained the 3D-CNNs on normal facial expression database Oulu-CASIA by supervised learning, then the pre-trained model was effectively transferred to the target domain, which was the facial micro-expression recognition task. The proposed method was evaluated on two available facial micro-expression datasets, i.e. CASME II and SMIC-HS. We obtained the overall accuracy of 97.6% on CASME II, and 97.4% on SMIC, which were 3.4% and 1.6% higher than the 3D-CNNs model without transfer learning, respectively. And the experimental results demonstrated that our method achieved superior performance compared to state-of-the-art methods.
Akihito TAYA Takayuki NISHIO Masahiro MORIKURA Koji YAMAMOTO
Sharing perceptual data (e.g., camera and LiDAR data) with other vehicles enhances the traffic safety of autonomous vehicles because it helps vehicles locate other vehicles and pedestrians in their blind spots. Such safety applications require high throughput and short delay, which cannot be achieved by conventional microwave vehicular communication systems. Therefore, millimeter-wave (mmWave) communications are considered to be a key technology for sharing perceptual data because of their wide bandwidth. One of the challenges of data sharing in mmWave communications is broadcasting because narrow-beam directional antennas are used to obtain high gain. Because many vehicles should share their perceptual data to others within a short time frame in order to enlarge the areas that can be perceived based on shared perceptual data, an efficient scheduling for concurrent transmission that improves spatial reuse is required for perceptual data sharing. This paper proposes a data sharing algorithm that employs a graph-based concurrent transmission scheduling. The proposed algorithm realizes concurrent transmission to improve spatial reuse by designing a rule that is utilized to determine if the two pairs of transmitters and receivers interfere with each other by considering the radio propagation characteristics of narrow-beam antennas. A prioritization method that considers the geographical information in perceptual data is also designed to enlarge perceivable areas in situations where data sharing time is limited and not all data can be shared. Simulation results demonstrate that the proposed algorithm doubles the area of the cooperatively perceivable region compared with a conventional algorithm that does not consider mmWave communications because the proposed algorithm achieves high-throughput transmission by improving spatial reuse. The prioritization also enlarges the perceivable region by a maximum of 20%.