In the present paper, we propose elliptic curve scalar multiplication methods on pairing-friendly elliptic curves. The proposed method is efficient on elliptic curves on which Atei pairing or optimal pairing is efficiently computed.

Localized content-based image retrieval (LCBIR) has emerged as a hot topic more recently because in the scenario of CBIR, the user is interested in a portion of the image and the rest of the image is irrelevant. In this paper, we propose a novel region-level relevance feedback method to solve the LCBIR problem. Firstly, the visual attention model is employed to measure the regional saliency of each image in the feedback image set provided by the user. Secondly, the regions in the image set are constructed to form an affinity matrix and a novel propagation energy function is defined which takes both low-level visual features and regional significance into consideration. After the iteration, regions in the positive images with high confident scores are selected as the candidate query set to conduct the next-round retrieval task until the retrieval results are satisfactory. Experimental results conducted on the SIVAL dataset demonstrate the effectiveness of the proposed approach.

In the present paper, a method for extracting user interest by constructing a hierarchy of words from social bookmarking (SBM) tags and emphasizing nouns based on the hierarchical structure (folksonomy) is proposed. Co-occurrence of the SBM tags basically have a semantic relationship. As a result of an experimental evaluation using the user profiles on Twitter, the authors discovered that the SBM tags and their word hierarchy have a rich vocabulary for extracting user interest.

Video applications such as video conferencing among multiple users and video surveillance systems require multiple video connections and QoS guarantee. These days the video systems equipped with IEEE 802.11 LAN interfaces allows a broadband wireless access to the Internet at a reasonable price. However, according to the current IEEE 802.11e HCCA standard, if more than two video sessions are to be established simultaneously, some of them must share the TXOP because the available number of TSIDs for video transmission is restricted to two. In order to resolve this problem, we devise a scheme which can establish up to 13 video sessions by slightly modifying the frame structure while maintaining the compatibility with the current standard. Our scheme is implemented on the NCTUns 4.0 network simulator, and evaluated numerically in terms of throughput, delay, and PSNR. Also real video clips are used as input to our simulation. The results showed that our scheme guarantees the transmission bandwidth requested by each video session.

IP Datacast over DVB-H has been adopted as a core technology to build complete end-to-end mobile broadcast TV systems. In order for this technology to be successful in the market, provisioning of acceptable QoE (Quality of Experience) to the users, as well as a wide range of business models to the service providers, is essential. In this paper, we analyze the channel zapping time, which is an important metric to measure QoE for mobile broadcast TV services. In particular, we clarify primary components that determine the channel zapping time for protected services in IP Datacast over DVB-H. Our analysis is based on the data gathered during the trial service of the OMA-BCAST Smartcard profile in Singapore, Asia. Based on the analysis, we show that a significant reduction in channel zapping time can be achieved by optimizing the transmission parameters related to the key derivation time and the synchronization time between the content stream and the key stream.

This letter is devoted to derivation of a transformation law which converts a class of nonlinear affine control systems with n-states and 2-iputs into simpler systems with chained structure. First, we give a problem formulation that we consider throughout this letter. We next introduce a transformation law and gives its mathematical certification. Then, we apply the transformation method to an example and consider control design based on chained structure for the example in order to confirm the effectiveness of our approach.

A safe prime p is a prime such that (p-1)/2 is also a prime. A primality test or a safe primality test is normally a combination of trial division and a probabilistic primality test. Since the number of small odd primes used in the trial division affects the performance of the combination, researchers have studied how to obtain the optimal number of small odd primes to be used in the trial division and the expected running time of the combination for primality tests. However, in the case of safe primality tests, the analysis of the combination is more difficult, and thus no such results have been given. In this paper, we present the first probabilistic analysis on the expected running time and the optimal number of small odd primes to be used in the trial division for optimizing the tests. Experimental results show that our probabilistic analysis estimates the behavior of the safe primality tests very well.

Motivated by the question of how to quickly transfer large files if multiple and heterogeneous networks are available but each has insufficient performance for a requested task, we propose a data transfer framework for integrating multiple and heterogeneous challenged access networks, in which long delays, heavy packet losses, and frequent disconnections are observed. An important feature of this framework is to transmit the control information separately from the transmission of data information, where they are flexibly transferred on different types of communication media (network paths) in different ways, and to provide a virtual single network path between the two nodes. We describe the design of the mechanisms of this framework such as the retransmission, the rate adjustment of each data flow, and the data-flow setup control. We validate a prototype implementation through two different experiments using terrestrial networks and a satellite communication system.

This paper describes a new technique for the design of 3-terminal regulators in which the output voltage level can be adjusted without additional terminals or extra off-chip components. This circuit restricts the increase in the number of terminal pins by using a pin as both a voltage supply output and a voltage setup input. The voltage setup information is introduced using a serial control signal from outside the chip. Using the intermediate voltage level between the supply voltage and the regulator output, the adjustment data in the internal nonvolatile memory are safely updated without noise disturbance. To input the setup information into the chip in a stable manner, we developed a new 1-wire serial interface which combines key pattern matching and burst signal detection. To ensure high reliability, we suggested a quantitative method for evaluating the influence of noise in our new interface using a simple model with superimposed random noise. Circuits additional to those for a conventional 3-terminal regulator, include a 1-wire serial communication circuit, a low-capacity non-volatile memory, and a digital to analog (D/A) converter. A test chip was developed using 0.35 µm standard CMOS process, and there was almost no overhead to the conventional 3-terminal regulator in both chip area and power dissipation. In an on-board test with the test chip, we confirmed successful output voltage adjustment from 1.0 V to 2.7 V with approximately 6.5 mV precision.

This paper shows a simple methodology for shortening a ciphertext of reproducible key encapsulation mechanisms. Specifically, it transforms a key encapsulation mechanism having OW-CCCA security and reproducibility into that of IND-CCA secure in the random oracle model whose ciphertext is shorter. Various existing chosen-ciphertext secure key encapsulation mechanisms (in the standard model) are reproducible, and thus their ciphertext can be shortened by the proposed transformation. The transformed scheme requires only one additional hashing for encryption. This property enables us to implement both the original scheme and the transformed scheme into a single chip simultaneously with small gate-size overhead. Using this chip, a sender can flexibly switch schemes to encrypt a message in a message-by-message manner. Such a use of schemes is also analyzed.

We propose a new resource prediction method for the Demand Assigned Multiple Access (DAMA) scheme in satellite networks. Inaccurate prediction of future traffic causes degradation of QoS and utilization due to the long delay in satellite networks. The Dynamic Leveling Scheme (DLS) use a leveling method to modify its prediction to a discrete one to change the precision of the prediction result. This new scheme has two features: 1) It enhances the probability of successful prediction and 2) it can be applied to any type of existing prediction method. Simulations show enhanced utilization and performance of the satellite link.

Locator/ID Separation Protocol (LISP) is an efficient proposal for solving the severe routing scalability problems existing in the current IPv4-based Internet and the future IPv6-based Internet. However, the basic LISP architecture does not specify how to support mobility in detail. As mobility is a fundamental issue faced by the future Internet, LISP mobility architecture (LISP-MN) was proposed recently to extend LISP to support mobility. Nevertheless, LISP-MN is a host-based mobility approach which requires software changes in end systems. To some extent, such a design breaks the primary design principles of LISP, which is a network-based protocol and requires no modification to the hosts. In addition, LISP-MN faces the same inherent problems as other host-based approaches (e.g., MIPv4, MIPv6), such as handover latency, packet loss, and signalling overhead. To solve the above problems, this paper proposes MobileID, which is a network-based localized mobility approach for LISP. In our design, a mobile node is not aware of its mobility and does not participate in handover signalling. Instead, the network takes the responsibility for managing mobility on behalf of the mobile node. We present a general overview of MobileID architecture, and introduce the detailed protocol operations in terms of the basic MobileID handover process and the route optimization procedures. Furthermore, we describe a MobileID analytic model, and compare MobileID handover performance with three representative mobility solutions, i.e., LISP-MN, MIPv6 and PMIPv6. Numerical results show the superior performance of MobileID. The handover latency of MobileID is much lower than those of LISP-MN and MIPv6, and it becomes lower than that of PMIPv6 in case of a long wireless link delay.

A new compact form of the sliding window recursive least squares (SWRLS) algorithm, the I-SWRLS algorithm, is derived using an indefinite matrix. The resultant algorithm has a form similar to that of the traditional recursive least squares (RLS) algorithm, and is more computationally efficient than the conventional SWRLS algorithm including two Riccati equations. Furthermore, a computationally reduced version of the I-SWRLS algorithm is developed utilizing a shift property of the correlation matrix of input data. The resulting fast algorithm reduces the computational complexity from O(N2) to O(N) per iteration when the filter length (tap number) is N, but retains the same tracking performance as the original algorithm. This fast algorithm is much easier to implement than the existing SWC FTF algorithms.

This paper presents a novel technique to realize Karnin et al.'s (k,n)-threshold schemes over binary field extensions as a software. Our realization uses the matrix representation of finite fields and matrix-vector multiplications, and enables rapid operations in software implementation. The theoretical evaluation and computer simulation reveal that our realization of Karnin et al.'s scheme achieves much faster processing time than the ordinary symbol oriented realization of the scheme. Further, we show that our realization has comparable performance to the existing exclusive-OR-based fast schemes of Fujii et al. and Kurihara et al.

A bootstrapped analog switch with constant on-resistance is proposed for the successive approximation (SA) analog-to-digital converters (ADCs) that have many input-sampling switches. The initialization circuit, which is composed of a short pulse generator and a transmission gate, improves the linearity of the proposed bootstrapped analog switch by reducing the effect of the capacitive load. To evaluate the proposed bootstrapped analog switch, the 10-bit 1 MS/s CMOS SA ADC with a rail-to-rail differential input signal was designed by using a 0.18 µm CMOS process with 1.0 V supply voltage. The proposed bootstrapped analog switch reduced the maximum VGS variation of the conventional bootstrapped analog switch by 67%. It also enhanced the signal to noise-distortion ratio of the SA ADC by 4.8 dB when the capacitance of its gate node is 100 fF, and this improvement was maximized when the capacitance of its gate node increases.

This paper develops planar circuit filters consisting of arbitrarily-shaped conductor patches and slots on a conductor-backed dielectric substrate, which are designed by an optimization technique based on the genetic algorithm. The developed filter has multiple resonators and their mutual couplings in the limited space by using both sides of the substrate, so that its compactness is realized. We first demonstrate the effectiveness of the present filter structure from some design samples numerically and experimentally. Then as a practical application, we design compact UWB filters, and their filter characteristics are verified from the measurements.

In optical packet switches, the overhead of reconfiguring a switch fabric is not negligible with respect to the packet transmission time and can adversely affect switch performance. The overhead increases the average waiting time of packets and worsens throughput performance. Therefore, scheduling packets requires additional considerations on the reconfiguration frequency. This work intends to analytically find the optimal reconfiguration frequency that minimizes the average waiting time of packets. It proposes an analytical model to facilitate our analysis on reconfiguration optimization for input-buffered optical packet switches with the reconfiguration overhead. The analytical model is based on a Markovian analysis and is used to study the effects of various network parameters on the average waiting time of packets. Of particular interest is the derivation of closed-form equations that quantify the effects of the reconfiguration frequency on the average waiting time of packets. Quantitative examples are given to show that properly balancing the reconfiguration frequency can significantly reduce the average waiting time of packets. In the case of heavy traffic, the basic round-robin scheduling scheme with the optimal reconfiguration frequency can achieve as much as 30% reduction in the average waiting time of packets, when compared with the basic round-robin scheduling scheme with a fixed reconfiguration frequency.

This paper introduces the ensemble Monte Carlo (EMC) method to study the time behavior of single-electron-based logic gates. The method is then applied to a buffer-inverter gate and the results are examined. An analytical model for time behavior at the low-temperature limit is then introduced and its results are compared with those of the EMC. Finally, a compact model for the delay-error behavior of the buffer gate is introduced.

This paper presents a novel electrical polarization forming antenna for mobile satellite communication systems using linear polarization. To electrically form the desired polarization, it is necessary to excite the two orthogonal polarization antenna planes with appropriate weights. The proposed antenna uses digitally-based polarization and calibration functions to characterize the two RF paths. The calibration techniques used are critical to accurately forming the desired polarization. Proposed calibration techniques are very simple; the feedback signal consists of just amplitude levels. The proposals are validated by polarization forming measurements conducted on a fabricated antenna.

The multiple-input multiple-output (MIMO) performance of the modulated scattering antenna array (MSAA) is analyzed numerically for the first time in indoor environment based on an approach to hybridization of the Volterra series method and method of moments (MoM) in this letter. Mutual coupling effect between the Modulated scattering element (MSE) and the normal antenna element is also considered in this analysis. It is found that MIMO performance of the MSAA is improved with reducing the array spacing of the MSAA in 4 different indoor receiving areas. At the same time, the simulated results of the MSAA are compared with those of the dipole antenna array at the same condition.