A Monte Carlo calculation is performed to examine the transport coefficients of the electron gas under an inhomogeneous electric field. The expressions constructed from the M. C. results are then incorporated into the hydrodynamic formulation to calculate the internal characteristics of a silicon BJT device. The calculated results agree well with the Monte Carlo prediction.

This work describes a new analytical MOSFET model for analog circuit simulation based on the charge-sheet model. The current equation consists of diffusion and drift components, therefore Ids is a smooth function of the applied voltages. Since the original charge-sheet model is valid only for long-channel transistors, it has been further developed to describe quarter-micron MOSFETs by introducing the lateral electric field Ey into the theory. The new model includes these field contributions self-consistently, and describes the drain current of MOSFETs from long to quarter-micron channel lengths with a single model parameter set without discontinuities in derivatives of the drain current Ids. The mobility reduction due to Ey is described by an empirical equation with physical parameter values taken from literature. Only two fitting parameters, the impurity scattering and the surface roughness scattering in the mobility equation, are added to the physical parameters. The subdiffusion lengths are also taken as fitting parameters. Though the new model reduces the number of fitting parameters totally to four, it reproduces measured Ids excellently for MOSFETs with all channel lengths. The model has been included in the parameter extraction program JANUS, which extracts model parameters automatically. The algorithm for parameter extraction is summarized.

In recent years, ion implantation has become one of the key techniques in semiconductor fabrication. The annealing of the damage produced during implantation is, however, not fully understood. Ion implantation at high temperatures allows the time-resolved study of implantation-enhanced diffusion. During the process, point defects are generated by the ion implantation and consumed by recombination in the bulk as well as by diffusion to the surface and recombination there. With increasing temperatures, the recombination of point defects, which are acting as diffusion vehicles, results in reduced effective diffusion. Profiles processed above 900 show marked uphill diffusion at the surface caused by large gradients of the point defect concentrations. This uphill diffusion affirms the generally accepted pair diffusion theories. Since the point defects are in steady state even after process times which are short compared to the total process time, we are able to give a qualitative analysis of the dose dependence of the diffusion. By extensive numerical simulations, we could estimate the product of bulk recombination rate and equilibrium concentrations of self-interstitials and vacancies as well as the interface recombination velocity for the self-interstitials. The results obtained are in qualitative agreement with previous work of others. The results demonstrate, in fact, clearly the advantages of the method presented. But due to experimental problems concerning the temperature measurement, which have not been fully resolved up to now, the results have to be considered as crude estimates.

We have developed a new model to analyze the thermal failure mechanism due to electrical-over-stress (EOS) for two-dimensional planar pn-junction structures where the failure power is proportional to about 1/5 power of the failure time. We adopted a pseudo two-dimensional numerical simulation method where a pn-junction diode is divided into small elements and represented by a circuit network composed of many minute resistors and diodes. The failure mechanism studied by Wunsch and Bell, that is one of many studies for one-dimensional pn-diodes, is not valid for the case of two-dimensional pn-junction, such as a planar type junction. On the contrary, the failure mechanism was found to be much correlative with the junction structure, especially the impurity concentration in the substrate in the two-dimensional case. When the impurity concentration in the substrate is high enough (e.g. Nsub1017[cm-3]), the breakdown occurs at the whole junction. The heat transfer is one-dimensional and the failure power is proportional to about 1/2 power of the failure time, which is well known results reported by many researchers: e.g. Wunsch &Bell. On the other hand, when the impurity concentration in the substrate is low enough (e.g. Nsub1016[cm-3]), the breakdown occurs locally at the junction edge. The heat transfer is two-dimensional and the failure power is in proportion to about 1/5 power of the failure time.

In speech output expected as an ideal man-machine interface, there exists an important issue on emotion production in order to not only improve its naturalness but also achieve more sophisticated speech interaction between man and machine. Speech has two aspects, which are prosodic information and phonetic feature. For the purpose of application to natural and high quality speech synthesis, the role of prosody in speech perception has been studied. In this paper, prosodic components, which contribute to the expression of emotions and their intensity, are clarified by analyzing emotional speech and by conducting listening tests of synthetic speech. The analysis is performed by substituting the components of neutral speech (i.e., one with no particular emotion) with those of emotional speech preserving the temporal correspondence by means of DTW. It has been confirmed that prosodic components, which are composed of pitch structure, temporal structure and amplitude structure, contribute to the expression of emotions more than the spectral structure of speech. The results of listening tests using prosodic substituted speech show that temporal structure is the most important for the expression of anger, while all of three components are much more important for the intensity of anger. Pitch structure also plays a significant role in the expression of joy and sadness and their intensity. These results make it possible to convert neutral utterances into utterances expressing various emotions. The results can also be applied to controlling the emotional characteristics of speech in synthesis by rule.

A yellow light emitting display using neon-hydrogen-argon mixture as filling gas is presented. Strong "monochromatisation" of the emitted light is reported for the first time on the wavelength λ585.3 nm. Experimental results on the dependence of the "monochromatisation effect" is given for various pressure values and filling gas composition. It is underlined the existence of a process of selective population of the upper level 3p[1/2]0 of the transition corressponding to the wavelength 585.3 nm. The obtained results are discussed in relation with the reported results on yellow light laser in which a discharge in neon-hydrogen mixture is used for laser radiation generation at λ585.3 nm. The proposed explanation of different authors on the upper level population through radiative or dissociative recombination of neon ions is discussed and a new hypothesis is advanced for the strong monochromatisation observed in neon-hydrogen or neon-hydrogen-argon filled displays. According to this hypothesis, in the feeding process of the upper level 3p[1/2]0 are taking part the neon metastable states too. If such an assumption will come true, cyclic processes in yellow light generation might appear.

In this paper, the eigen-function weighted boundary integral epuation method (EW-BIEM) is applied to analyze the dispersion characteristics of various planar transmission lines with finite metallization thickness, such as the micro-strip lines, conductor-backed coplanar waveguides and micro-coplanar striplines for the first time. Due to the choice of the eigen-functions as weighted functions instead of Green's function, the computational time is shortened to a great extent and the singularity problems are also avoided. The difficulty in treating strip thickness can be overcome by considering the 90 edge on the strip as a 90 circular arc whose radius tends to zero. The computational results clearly demonstrate that the effects of finite strip thickness on the propagation properties of these transmission lines can be treated easily and efficiently with this method.

The development of computers capable of handling complex objects requires nonverbal interfaces that can bidirectionally mediate nonverbal communication including the gestures of both people and computers. Nonverbal expressions are poweful media for enriching and facilitating humancomputer interaction when used as interface languages. Four gestural modes are appropriate for human-computer interaction: the sign, indication, illustration and manipulation modes. All these modes can be conveyed by a generalized gesture interface that has specific processors for each mode. The basic component of the generalized gesture interface, a gesture dictionary, is proposed. The dictionary can accept sign and indicating gestures in which postures or body shapes are significant, pass their meaning to a computer and display gestures from the computer. For this purpose it converts body shapes into gestural codes by means of two code systems and, moreover, it performs bidirectional conversions of several gesture representations. This dictionary is applied to the translation of Japanese into sign language; it displays an actor who speaks the given Japanese sentences by gesture of sign words and finger alphabets. The performance of this application confirms the adequacy and usefulness of the gesture dictionary.

In order to realize flexible interaction control between user and information processing system, a special purpose user model is proposed on the basis of the knowledge-based design method of user interface system. The user-specific control knowledge of user-oriented interface environment is represented explicitly in the user model and utilized in the user-oriented interface system. Furthermore, the framework of user-oriented interface environment based on this user model called user-model-driven interface system, is proposed as one of user-adaptive human interface systems, in this paper. According to the proposed framework, a prototype system of the user-model-driven interface system is implemented and the facility of user-specific interaction control based on the user model has been verified with respect to an electronic mail handling task.

In this paper, we propose a new algorithm for the problem of floorplanning of the mixed design of macro and standard cells. The proposed algorithm which is based on partitioning and slicing approach, uses a modified min-cut bipartitioning heuristic. The heuristic bipartitions a block of a mixture of macro and standard cells to minimize the netcut, which are the number of nets connecting both sub-blocks, with size constraints. A sub-block is a resulting descendant block. Before starting the bipartitioning of the block, the macro cell with the longest side in the block is selected first. Using edges of the selected macro cell, bipartitionings are performed twice fixing the location of the macro cell on one of 4 corners of the block with its rotation and reflection. Bipartitioning of blocks is repeated until each block has either a macro cell or standard cells without macro cells. As a result of bipartitioning, a slicing tree is constructed. Using the proposed floorplan algorithm, we developed an automatic placement and routing tool, Cell Designer, for the mixed design of macro and standard cells. According to the floorplanner, macro cells are placed and standard cells are grouped into standard cell blocks. Standard cells are placed and routed within estimated area of block using conventional tools. They form a fixed-shaped block like a macro cell. Interconnections between the two adjacent blocks are performed with a conventional channel router. The channels and the order of channel routing are determined following the hierarchy of the slicing tree. Cell Designer has a dedicated graphics editor to provide interactive services to users. Experimental results on well-known benchmark data are shown.

In this paper we study the problem of scheduling a tree-structured program on multiprocessors so as to minimize the total execution time, which includes communication delay between processors. It is assumed in the problem that a sufficiently large number of processors are available. It is known that if the program structures are restricted to be out-trees, the problem can be solved in O(n2) time, where n denotes the number of modules of a program. However, this problem is known to be NP-hard if the program structures are allowed to be in-trees. Up to now, no optimal algorithm, except an obvious one, was known for the latter case while some approximation algorithms were shown. We present an optimization algorithm with a nontrivial time bound O((1.52)nn log n) for the in-tree case.

Several issues on semiconductor lasers with low dimensional quantum systems are discussed. First, described are fabrication techniques for quantum wire and box structures, particularly a selective growth MOCVD growth technique which have been recently developed. Using this technique, we obtained 20 nm15 nm triangular-shaped quantum wire structures. Next, we investigate band structures of the quantum wires having strain effects, including lasing characteristics of quantum wire lasers with the strain effects. Finally we discuss importance to control both the electron wave mode and the optical wave mode for future high performance lasers, which leads to the concept of quantum micro-lasers. In order to demonstrate possibility to control the spontaneous mode in the laser cavity, an experimental result is shown on enhancement and inhibition effects of the spontaneous emission mode in a vertical cavity laser having two kinds of the quantum well.

In this paper we review the recent progress and basic technology of vertical cavity surface emitting lasers together with related parallel surface operating optical devices. First, the concept of surface emitting lasers is presented, and then currently developed device technologies will be reviewed. We will feature several technical issues, such as multi-layer structures, 2-dimensional arrays, photonic integration, etc. Lastly, future prospects for parallel lightwave systems will be discussed.

This paper concerns a subclass of regular languages, called strictly regular languages, and studies the problem of identifying the class of strictly regular languages in the limit from positive data. We show that the class of strictly regular languages (SRLs) is polynomial time identifiable in the limit from positive data. That is, there is an algorithm that, for any strictly regular language L, identifies a finite automaton accepting L, called a strictly deterministic finite automaton (SDFA) in the limit from positive data, satisfying the property that the time for updating a conjecture is bounded by O(mN2), where m is the cardinality of the alphabet for L and N is the sum of lengths of all positive data provided. This is in contrast with the fact that the class of regular languages is not identifiable in the limit from positive data.

A chordal ring network is a processor network on which n processors are arranged to a ring with additional chords. We study a distributed leader election algorithm on chordal ring networks and present trade-offs between the message complexity and the number of chords at each processor and between the message complexity and the length of chords as follows:For every d(1dlog* n1) there exists a chordal ring network with d chords at each processor on which the message complexity for leader election is O(n(log(d1)nlog* n)).For every d(1dlog* n1) there exists a chordal ring network with log(d1)nd1 chords at each processor on which the message complexity for leader election is O(dn).For every m(2mn/2) there exists a chordal ring network whose chords have at most length m such that the message complexity for leader election is O((n/m)log n).

A reversible (or injective) cellular automaton (RCA) is a backward deterministic" CA, i.e., every configuration of it has at most one predecessor. Margolus has been shown that there is a computation-universal two-dimensional 2-state RCA model. Although his model is very interesting, it differs from a standard CA model because of its somewhat spatial and temporal non-uniformity. In this paper, we present two kinds of simple 16-state computation-universal models using the framework of two-dimensional reversible partitioned CA (PCA). Since PCA can be considered as a subclass of standard CA, we can immediately obtain 16-state standard RCA models from them. For each of these models, we designed a configuration which simulates a Fredkin gate. Since Fredkin gate has been known to be a universal logic element, computation-universality of these two models is concluded.

A method is presented for analyzing the scalar wave scattering from a conducting target of arbitrary shape in random media for both the Dirichlet and Neumann problems. The current generators on the target are introduced and expressed generally by the Yasuura method. When using the current generators, the scattering problem is reduced to the wave propagation problem in random media.

The nonlinear optical properties of organics with unsaturated bonds were compared with those of inorganics including semiconductors and dielectrics. Because of the mesomeric effect, namely quantum mechanical resonance effect among configurations, aromatic molecules and polymers have larger optical nonlinear parameters defined as δ(n)=X(n)/(X(l))n both for the second (n=2) and third-order (n=3) nonlinearities. Experimental results of ultrafast nonlinear response of conjugated polymers, especially polydiacetylenes, were described and a model is proposed to explain the relaxation processes of photoexcitations in the conjugated polymers. Applying the model constructed on the basis of the extensive experimental study, we propose model polymers to obtain ultrafast resonant optical nonlinearity.

Several issues on semiconductor lasers with low dimensional quantum systems are discussed. First, described are fabrication techniques for quantum wire and box structures, particularly a selective growth MOCVD growth technique which have been recently developed. Using this technique, we obtained 20 nm 15 nm triangular-shaped quantum wire structures. Next, we investigate band structures of the quantum wires having strain effects, including lasing characteristics of quantum wire lasers with the strain effects. Finally we discuss importance to control both the electron wave mode and the optical wave mode for future high performance lasers, which leads to the concept of quantum micro-lasers. In order to demonstrate possibility to control the spontaneous mode in the laser cavity, an experimental result is shown on enhancement and inhibition effects of the spontaneous emission mode in a vertical cavity laser having two kinds of the quantum well.

We propose two types of public-key cryptographic schemes based on elliptic curves modulo n, where n is the product of secret large primes p and q. The RSA-type scheme has an encryption function with an odd multiplier. The Rabin-type scheme has an encryption function with a multiplier of 2. The security of the proposed schemes is based on the difficulty of factoring n. Other security characteristics are also discussed. We show some applications to a master key scheme and blind signature scheme.