Based on Free Probability Theory (FPT), which has become an important branch of Random Matrix Theory (RMT), a new scheme of frequency band sensing for Cognitive Radio (CR) in Direct-Sequence Code-Division Multiple-Access (DS-CDMA) multiuser network is proposed. Unlike previous studies in the field, the new scheme does not require the knowledge of the spreading sequences of users and is related to the behavior of the asymptotic free behavior of random matrices. Simulation results show that the asymptotic claims hold true even for a small number of observations (which makes it convenient for time-varying topologies) outperforming classical energy detection scheme and another scheme based on random matrix theory.

In this letter, the performance improvement by the deployment of multiple antennas in cognitive radio systems is studied from a system-level view. The term opportunistic spectrum efficiency (OSE) is defined as the performance metric to evaluate the spectrum opportunities that can actually be exploited by the secondary user (SU). By applying a simple energy combining detector, we show that deploying multiple antennas at the SU transceiver can improve the maximum achievable OSE significantly. Numerical results also reveal that the improvement comes from the reduction of both the detection overhead and the false alarm probability.

Spectrum sensing is an important function for dynamic spectrum access (DSA) type cognitive radio systems to detect opportunities for sharing the spectrum with a primary system. The key requirements for spectrum sensing are stability in controlling the probability of false alarm as well as detection performance of the primary signals. However, false alarms can be triggered by noise uncertainty at the secondary devices or unknown interference signals from other secondary systems in realistic radio environments. This paper proposes a robust spectrum sensing method against such uncertainties; it is a kind of cyclostationary feature detection (CFD) approaches. Our proposed method, referred to as maximum cyclic autocorrelation selection (MCAS), compares the peak and non-peak values of the cyclic autocorrelation function (CAF) to detect primary signals, where the non-peak value is the CAF value calculated at cyclic frequencies between the peaks. In MCAS, the desired probability of false alarm can be obtained by setting the number of the non-peak values. In addition, the multiple peak values are combined in MCAS to obtain noise reduction effect and coherent combining gain. Through computer simulations, we show that MCAS can control the probability of false alarm under the condition of noise uncertainty and interference. Furthermore, our method achieves better performance with much less computational complexity in comparison to conventional CFD methods.

Due to the advancement of software radio and RF technology, cognitive radio(CR) has become an enabling technology to realize dynamic spectrum access through its spectrum sensing and reconfiguration capability. Robust and reliable spectrum sensing is a key factor to discover spectrum opportunity. Single cognitive radios often fail to provide such reliable information because of their inherent sensitivity limitation. Primary signals that are subject to detection by cognitive radios may become weak due to several factors such as fading and shadowing. One approach to overcome this problem is to perform spectrum sensing by using multiple CRs or multiple spectrum sensors. This approach is known as distributed sensing because sensing is carried out through cooperation of spatially distributed sensors. In distributed sensing, sensors should perform spectrum sensing and forward the result to a destination where data fusion is carried out. Depending on the channel conditions between sensors (sensor-to-sensor channel) and between the sensor and the radio (user-channel), we explore different spectrum sensing algorithms where sensors provide the sensing information either cooperatively or independently. Moreover we investigate sensing schemes based on soft information combining (SC), hard information combining (HC). Finally we propose a two-stage detection scheme that uses both SC and HC. The newly proposed detection scheme is shown to provide improved performance compared to sensing based on either HC or SC alone. Computer simulation results are provided to illustrate the performances of the different sensing algorithms.

As one of the dynamic spectrum access technologies, "cognitive radio technology," which aims to improve the spectrum efficiency, has been studied. In cognitive radio networks, each node recognizes radio conditions, and according to them, optimizes its wireless communication routes. Cognitive radio systems integrate the heterogeneous wireless systems not only by switching over them but also aggregating and utilizing them simultaneously. The adaptive control of switchover use and concurrent use of various wireless systems will offer a stable and flexible wireless communication. In this paper, we propose the adaptive traffic route control scheme that provides high quality of service (QoS) for cognitive radio technology, and examine the performance of the proposed scheme through the field trials and computer simulations. The results of field trials show that the adaptive route control according to the radio conditions improves the user IP throughput by more than 20% and reduce the one-way delay to less than 1/6 with the concurrent use of IEEE802.16 and IEEE802.11 wireless media. Moreover, the simulation results assuming hundreds of mobile terminals reveal that the number of users receiving the required QoS of voice over IP (VoIP) service and the total network throughput of FTP users increase by more than twice at the same time with the proposed algorithm. The proposed adaptive traffic route control scheme can enhance the performances of the cognitive radio technologies by providing the appropriate communication routes for various applications to satisfy their required QoS.

To realize dynamic spectrum access (DSA), spectrum sensing is performed to detect the presence or absence of primary users (PUs). This paper proposes a sensing architecture. This architecture enables use cases such as DSA with PU detection using a single spectrum sensor and DSA with distributed sensing, such as cooperative sensing, collaborative sensing, and selective sensing. In this paper we focus on distributed sensing. These sensing schemes employ distributed spectrum sensors (DSSs) where each sensor uses energy detection (ED) in Rayleigh fading environment. To theoretically analyze the performance of the three sensing schemes, a closed-form expression for the probability of detection by ED with selective combining (SC) in Rayleigh fading environment is derived. Applying this expression to the PU detection problem, we obtain analytical models of the three sensing schemes. Analysis shows that at 5-dB signal-to-noise ratio (SNR) and with a false alarm rate of 0.004, the probability of detection is increased from 0.02 to 0.3 and 0.4, respectively, by cooperative sensing and collaborative sensing schemes using using three DSSs. Results also show that the selected sensing scheme matches the performance of the collaborative sensing scheme. Moreover, it provides a low false alarm rate.

In this paper, a sidelobe suppression technique for orthogonal frequency division multiplexing (OFDM)-based cognitive radios (CR) is proposed. In the OFDM-based CR systems, after the CR terminal executes spectrum sensing, it transmits a CR packet by activating the subcarriers in the frequency bands where no signals are detected (hereinafter, these subcarriers are called "active subcarrier") and by disabling (nulling) the subcarriers in the frequency bands where the signals are detected. In this situation, a problem arises in that the signals that leak from the active subcarriers to the null subcarriers may interfere with the primary systems. Therefore, this signal leakage has to be minimized. In many OFDM-based wireless communication systems, one packet or frame consists of multiple OFDM symbols and the discontinuity between the consecutive OFDM symbols causes the signal leakage to the null subcarriers. In the proposed method, signal leakage to the null subcarriers is suppressed by regenerating null subcarriers in the frequency-domain signal of the whole packet as follows. One CR packet consisting of multiple OFDM symbols having null subcarriers and guard interval (GI) is buffered and oversampled, and then the oversampled signal is Fourier transformed at once and consequently the frequency-domain signal of the packet is obtained. The null subcarriers in the frequency-domain signal are zeroed again, and then the signal is inverse Fourier transformed and transmitted. The proposed method significantly suppresses the signal leakage. The spectral power density, the peak-to-average power ratio (PAPR) and the packet error rate (PER) performances of the proposed method are evaluated by computer simulations and the effectiveness of the proposed method is shown.

Spectrum sensing is a key technology within Cognitive Radio (CR) systems. Cooperative spectrum sensing using a distributed model provides improved detection for the primary user, which opens the CR system to a new security threat. This threat is the decrease of the cooperative sensing performance due to the spectrum sensing data falsification which is generated from malicious users. Our proposed scheme, based on robust statistics, utilizes only available past sensing nodes' received power data for estimating the distribution parameters of the primary signal presence and absence hypotheses. These estimated parameters are used to perform the Dempster-Shafer theory of evidence data fusion which causes the elimination of malicious users. Furthermore, in order to enhance performance, a node's reliability weight is supplemented along with the data fusion scheme. Simulation results indicate that our proposed scheme can provide a powerful capability in eliminating malicious users as well as a high gain of data fusion under various cases of channel condition.

When cognitive radio (CR) systems dynamically use the frequency band, a control signal is necessary to indicate which carrier frequencies are currently available in the network. In order to keep efficient spectrum utilization, this control signal also should be transmitted based on the channel conditions. If transmitters dynamically select carrier frequencies, receivers have to receive control signals without knowledge of their carrier frequencies. To enable such transmission and reception, this paper proposes a novel scheme called DCPT (Differential Code Parallel Transmission). With DCPT, receivers can receive low-rate information with no knowledge of the carrier frequencies. The transmitter transmits two signals whose carrier frequencies are spaced by a predefined value. The absolute values of the carrier frequencies can be varied. When the receiver acquires the DCPT signal, it multiplies the signal by a frequency-shifted version of the signal; this yields a DC component that represents the data signal which is then demodulated. The performance was evaluated by means of numerical analysis and computer simulation. We confirmed that DCPT operates successfully even under severe interference if its parameters are appropriately configured.

A 2 to 5 GHz-band self frequency dividing quadrature mixer utilizing current re-use configuration with small size and broad band operation is proposed for a direct conversion receiver and a low-IF receiver of cognitive radio. The proposed mixer operates at twice the LO frequency by directly using a static type flip-flop frequency divider as the LO switching circuit for quadrature signal generation. The current re-use configuration is realized because the dc current of the frequency divider and the RF common-emitter amplifier share the same current flow path. Simulations and experiments verify that the proposed mixer offers broad band operation, miniaturization, and low power consumption. The mixer IC fabricated by 0.35 µm SiGe-BiCMOS technology achieved the conversion gain of 20.6 dB, noise figure of 11.9 dB and EVM for π/4-shift QPSK signal of 4.4% at 2.1 GHz with power consumption of 15 mW and size of 0.22 0.31 mm2. For the confirmation of broad band operation, the characteristics of conversion gain and noise figure were measured at 5.2 GHz. The proposed mixer could operate at 5.2 GHz with enough conversion gain, but the noise figure was inferior to that of 2.1 GHz. Therefore the further investigation and improvement about the noise figure will be needed for higher frequency.

In this paper, we propose a novel method for gathering sensing information by using an orthogonal narrowband signal for cooperative sensing in cognitive radio. It is desirable to improve the spectrum sensing performance by countering the locality effect of a wireless channel; cooperative sensing by using multiple inputs of sensing information from the surrounding sensing nodes has attracted attention. Cooperative sensing requires that sensing information be gathered at the master node for determining the existence of a primary signal. If the used information gathering method leads to redundancies, the total capacity of the secondary networks is not improved. In this paper, we propose a novel method for gathering sensing information that maps the sensing information to the orthogonal narrowband signal to achieve simultaneous sensing information gathering at the master node. In this method, the sensing information is mapped to an orthogonal subcarrier signal of an orthogonal frequency division multiplexing (OFDM) structure to reduce the frequency resource required for sensing information gathering. The orthogonal signals are transmitted simultaneously from multiple sensing nodes. This paper evaluates the performance of the proposed information gathering method and confirms its effectiveness.

This paper reviews applications of fuzzy logic to telecommunications and proposes a novel fuzzy combining scheme for cooperative spectrum sensing in cognitive radio systems. A summary of previous applications of fuzzy logic to telecommunications is given outlining also potential applications of fuzzy logic in future cognitive radio systems. In complex and dynamic operational environments, future cognitive radio systems will need sophisticated decision making and environment awareness techniques that are capable of handling multidimensional, conflicting and usually non-predictable decision making problems where optimal solutions can not be necessarily found. The results indicate that fuzzy logic can be used in cooperative spectrum sensing to provide additional flexibility to existing combining methods.

In this paper, we formulate a plan to operate multi-hop relays in IEEE 802.22-based cognitive radio (CR) systems and evaluate system performance to consider the propriety of a multi-hop relay scheme in CR systems. A centralized radio resource management and a simple deployment of relay stations (RSs) are assessed to make relay operations feasible under CR conditions. Simulation results show that the proposed multi-hop relay scheme significantly increases system throughput compared to a no-relay CR system as the incumbent user (IU) traffic gets heavier. Furthermore, the optimal number of hops can be determined given the traffic conditions.

Cognitive radio systems offer the opportunity to improve the spectrum utilization by detecting unused frequency bands while avoiding interference to primary users. This paper proposes a new algorithm for spectrum sensing, which is an energy detector using a hybrid (adaptive and fixed) threshold, in order to compensate the weak points of the existing energy detector in the distorted communication channel environment. Simulation results are presented which show that the performance of the new proposed scheme is better than the existing scheme using a fixed threshold or an adaptive threshold. Additionally, the performance is investigated in terms of several parameters such as the mobile speed and the probability of false alarms. The simulation results also show that the proposed algorithm makes the detector highly robust against fading, shadowing, and interference.

The cognitive radio technique promises to manage and allocate the scarce radio spectrum in the highly varying and disparate modern environments. This paper considers a cognitive radio scenario composed of two queues for the primary (licensed) users and cognitive (unlicensed) users. According to the Markov process, the system state equations are derived and an optimization model for the system is proposed. Next, the system performance is evaluated by calculations which show the rationality of our system model. Furthermore, discussions among different parameters for the system are presented based on the experimental results.

Cognitive Radio (CR) is expected to bring about a more flexible wireless communication environment by the efficient utilization of spectrum resources. In this paper, a CR coexisting with IEEE 802.11 Wireless Local Area Networks (WLANs) is proposed. In the Distributed Coordination Function (DCF) access scheme in IEEE 802.11 WLAN, a station (STA) transmits a data frame by executing a random backoff procedure after Distributed Inter Frame Space (DIFS) period, and the destination STA of the data frame responds with Ack frame to the source STA after Short Inter Frame Space (SIFS) period. After the Ack frame is transmitted, the same procedures are repeated. The proposed CR terminal recognizes the DIFS period and the SIFS period, and then it transmits CR signals during these periods with the transmission power that does not affect the IEEE 802.11 WLAN protocol. Thus, the proposed CR terminals recognize the periods during which IEEE 802.11 STAs do not transmit any frames and they use the periods to transmit CR signals. In this paper, IEEE 802.11 WLAN STA that has the capability for the proposed CR technique in addition to the normal 802.11 WLAN capability is considered and the improved average throughputs by the CR communications are evaluated in the computer simulation, and then the effectiveness of the proposed method is clarified.

Two adaptive energy detectors are proposed for cognitive radio systems to detect the primary users. Unlike the conventional energy detector (CED) where a decision is made after receiving all samples, our detectors make a decision with the sequential arrival of samples. Hence, the sample size of the proposed detectors is adaptive. Simulation results show that for a desired performance, the average sample size of the proposed detectors is much less than that of the CED. Therefore, they are more agile than the CED.

Cognitive radio (CR) is an adaptive spectrum sharing paradigm targeted to provide opportunistic spectrum access to secondary users for whom the frequency bands have not been licensed. The key tasks in a CR are to sense the spectral environment over a wide frequency band and allow unlicensed secondary users (CR users) to dynamically transmit/receive data over frequency bands unutilized by licensed primary users. Thus the CR transceiver should dynamically adapt its channel (frequency band) in response to the time-varying frequencies of wideband signal for seamless communication. In this paper, we present a low complexity reconfigurable filter architecture based on multi-band filtering and frequency masking techniques for dynamic channel adaptation in CR terminal. The proposed multi-standard architecture is capable of adapting to channels having different bandwidths corresponding to the channel spacing of time-varying channels. Design examples show that proposed architecture offers 12.2% power reduction and 26.5% average gate count reduction over conventional Per-Channel based architecture.

The key issue in cognitive radio is to design a reliable spectrum sensing method that is able to detect the signal in the target channel as well as to recognize its type. In this paper, focusing on classifying different orthogonal frequency-division multiplexing (OFDM) signals, we propose a two-step detection and identification approach based on the analysis of the cyclic autocorrelation function. The key parameters to separate different OFDM signals are the subcarrier spacing and symbol duration. A symmetric peak detection method is adopted in the first step, while a pulse detection method is used to determine the symbol duration. Simulations validate the proposed method.

This paper presents a framework of multimode fully digital receiver implementation using direct RF-to-digital conversion. In this architecture the entire band including multiple RF systems is directly converted to digital by a wideband high speed ADC, and the RF systems can be easily switched by only digital signal processing with the minimum analog RF components. The digital RF front-end consists of parallel processing blocks for parallel data streams considering practical ADC's configuration. The RF signals are converted into baseband through digital IF stage and the data rates are made down by two steps of decimation. In this paper, a principle investigation into a dualmode system implementation is presented for simplicity. The circuit resource and the robustness to the spurs (spurious outputs) of an NCO (numerically controlled oscillator) in the proposed design will be presented. The proposed architecture was implemented with an FPGA on the developed prototype system and the operations were also verified.