A PLC based mode multi/demultiplexer based on asymmetric directional coupler has advantages in terms of compactness, mass productivity, low insertion loss, and matured reliability. However, it has relatively large wavelength dependence due to the difference of coupling length. To expand the bandwidth, we have designed two-mode (LP01/LP11a) multi/demultiplexer by wavefront matching method and demonstrated the broadband and low-loss characteristics. This paper reviews the device design by wavefront matching method and investigates the mechanism of its broadband characteristics.

We propose and demonstrate a method that can demultiplex an optical OFDM signal with various capacity based on time lens-based optical Fourier transform. The proposed tunable optical OFDM signal demultiplexer is composed of a phase modulator and a tunable chromatic dispersion emulator. The spectrum of the variable capacity OFDM signal is transformed into Nyquist time-division multiplexing pulses with the optical Fourier transform, and the OFDM sub-carrier channels are dumultiplexed in the time-domain. We also propose a simple method for approximating and generating quadratic waveform to drive the phase modulator. After explaining the operating principle of the method and the design of some parameters in detail, we show successful demultiplexing of 4×8 and 4×10 Gbit/s optical OFDM signals with our proposed method as the preliminary investigation results.

A composite right/left-handed (CRLH) transmission line with demultiplexing property is proposed towards short-range functional wireless interconnects. The CRLH line is designed by analyzing dispersion relation of the microstrip line having a split-ring and a double-stub structure to realize frequency selective properties for leaky wave radiation. A prototype device is fabricated and estimated to study feasibility of the demultiplexing operation around ten GHz.

We have successfully demonstrated a GaInAs/InP multiple quantum well (MQW)-based wavelength switch composed of the straight arrayed waveguide with linearly varying refractive index distribution by changing the refractive index using thermo-optic effect. Since optical path length differences between waveguides in the array were achieved through refractive index differences that were controlled by SiO2 mask design in selective metal-organic vapor phase epitaxy (MOVPE), wavelength demultiplexing, and the output port switching in each wavelength of light by the refractive index change in the array waveguides through the thermo-optic effect were achieved. We have obtained the wavelength switching and the change of transmission spectra in each output ports.

This paper describes an 11-Gb/s CMOS demultiplexer (DEMUX) using redundant multi-valued logic (RMVL). The proposed circuit is received to serial binary data and is converted to parallel redundant multi-valued data. The converted data are reconverted to parallel binary data. By the redundant multi-valued data conversion, the RMVL makes it possible to achieve higher operating speeds than that of a conventional binary logic. The implemented DEMUX consists of eight integrators. The DEMUX is designed with 0.35 µm standard CMOS process. The validity and effectiveness are verified through HSPICE simulation. The DEMUX is achieved to the maximum data rate of 11-Gb/s and the average power consumption of 69.43 mW. This circuit is expected to operate at higher speed than 11-Gb/s in the deep-submicron process of the high operating frequency.

We have developed new current demultiplexer TFT circuits for AMOLED and applied the circuits to 2.2-in. QVGA AMOLED. The combination of the current demultiplexer and our voltage boosted current programmed pixel can achieve good uniformity of display image and a compact module.

A method of evaluating the wavelength filter spectrum response is introduced. The increase of the crosstalk level due to the filtering and the relation between the total crosstalk and the spectral efficiency are derived in detail using the Gaussian filter. Since this method can be applied to various kinds of filter spectrum responses, the ultimate spectral efficiencies of filters are compared. In this comparison, the problem of the box-like filter, which has been considered to be desirable, is revealed, and this is improved by cascading the filter spectrum. The requirement on the rejection floor that inheres in the filter is also made clear.

A GaInAs/InP multiple quantum well (MQW)-based wavelength demultiplexer composed of a waveguide array in which the refractive index varies across the array yielded successful results of wavelength demultiplexing and optical deflection. Since optical path length differences between waveguides in the array are achieved through refractive-index differences controlled by the SiO2 mask design in selective metal-organic vapor phase epitaxy (MOVPE), a straight waveguide grating can be formed with reduced optical propagation losses. A straight waveguide array device with a 1.4% refractive-index difference was fabricated. The fabrication of a preliminary wavelength demultiplexer was also achieved, for which a wavelength separation with an approximately 25 nm spacing and free spectral range (FSR) of approximately 100 nm were obtained. Moreover, an optical deflector was investigated and primitive deflection was achieved at 1460 and 1490 nm incident wavelengths.

A bent-waveguide-based multimode interference (MMI) demultiplexer is designed for the operation at 0.85- and 1.55-µm wavelengths using the three-dimensional semi-vectorial beam-propagation method. First, it is shown that the use of a straight MMI waveguide results in a long coupler length of more than 1000µm for wavelength demulitplexing. To reduce the coupler length, we next introduce a bent MMI waveguide. Bending with a radius of 1500µm leads to a coupler length of less than 200µm. After designing two output waveguides connected to the MMI section, we finally choose a coupler length to be 175µm for efficient demultiplexing properties. Consequently, an output power of more than 90% can be obtained, leading to a low insertion loss of 0.34dB at both 0.85- and 1.55-µm wavelengths. The demultiplexer achieves small polarization dependence, i.e., less than 2dB difference in contrast and 0.02dB difference in insertion loss.

We have designed a demultiplexer (DMUX) with a simple structure, high-speed operation circuits and large bias margins. By using a binary-tree architecture and clock-driven circuits, multi-channel DMUXs can be constructed easily from the same elemental circuits, i.e., 1-to-2 DMUX, consisting of a T-FF and a 1-to-2 switch. By applying cell-level optimization and Monte Carlo simulation, bias margins and operation frequency of the circuits were enlarged. Logical operations of the 1-to-2 DMUX and a multi-channel DMUX, e.g., a 1-to-4 DMUX were experimentally confirmed. It was also confirmed that the large margins, 33% of the DMUX (1-to-2 switch) was kept up regardless the degree of integration, and that the 1-to-2 DMUX can operate up to 46 GHz by using measure of average voltages across Josephson junctions.

We present the design of dual rail Data Driven Self Timed (DDST) DEMUX and MUX circuits for 50 GHz operation. The chosen current density is 6.5 kA/cm2 and simulations show good margins for speeds exceeding 50 GHz. Our previously reported dual-rail on-chip test system is also scaled up for 50 GHz operation.

A wavelength demultiplexer made of 2-D photonic crystal capable of simultaneously separating many channels from WDM light is analyzed in order to study the properties and clarify the design parameters. Numerical analyses are carried out for the optical filter structure and the demultiplexer structure which consists of several filters and waveguides carved in the crystal. The results of this paper show the considerations regarding the frequency tuning, the device size, the bandwidth and integration of filters. Further more, for a photonic crystal filter, a method for realizing a flat-top pass-band generally required from the dense-WDM systems is presented and its property is shown. The calculation method is the scattering matrix method which is proper to the analysis of the frequency domain in a 2-D photonic crystal with finite size and with some defects.

A wavelength demultiplexer made of 2-D photonic crystal capable of simultaneously separating many channels from WDM light is analyzed in order to study the properties and clarify the design parameters. Numerical analyses are carried out for the optical filter structure and the demultiplexer structure which consists of several filters and waveguides carved in the crystal. The results of this paper show the considerations regarding the frequency tuning, the device size, the bandwidth and integration of filters. Further more, for a photonic crystal filter, a method for realizing a flat-top pass-band generally required from the dense-WDM systems is presented and its property is shown. The calculation method is the scattering matrix method which is proper to the analysis of the frequency domain in a 2-D photonic crystal with finite size and with some defects.

A 50-Gbit/s demultiplexer IC module that uses 0.1-µm InAlAs/InGaAs/InP HEMTs is reported. The maximum error-free operation bit-rate of a fabricated module is 50 Gbit/s, and a wide phase margin of 170 degrees is obtained at 43 Gbit/s. 50-Gbit/s demultiplexing is the fastest performance of all packaged demultiplexer ICs yet reported.

The wavelength demultiplexer, using cascaded optical fiber gratings and circulators, was proposed and developed for application to optically amplified wavelength-division multiplexing (WDM) submarine cable systems with 100 GHz channel spacing. Our proposed demultiplexer cannot only achieve high wavelength selectivity, small excess loss and effective allocation of dispersion compensation fibers for each channel, but also be upgraded without affecting other existing channels. By using this demultiplexer, it has been successfully confirmed that 8 WDM channels were demultiplexed even after 6,000 km transmission including separate compensation of accumulated chromatic dispersion in each channel.

20-Gbit/s multiplexer (MUX) and demultiplexer (DEMUX) ICs are successfully fabricated using production-level high-performance super-self-aligned silicon bipolar transistors (HSSTs) with a unity current gain cutoff frequency of 50 GHz and a maximum oscillation frequency of 65 GHz.

An emitter coupled logic (ECL) compatible low-power GaAs 8:1 multiplexer (MUX) and 1:8 demultiplexer (DEMUX) for 10-Gb/s optical communication systems has been developed. In order to decrease the power consumption and to maximize the timing margin, we estimated the power consumption for direct-coupled FET logic (DCFL) and source-coupled FET logic (SCFL) circuits in terms of the D-type flip-flop (D-FF) operating speed and the duty-ratio variation. Based on the result, we used SCFL circuits in the clock-generating circuit and the circuits operating at 10 Gb/s, and we used DCFL circuits in the circuits operating below 5 Gb/s. These ICs, which are mounted on ceramic packages, operate at up to 10 Gb/s with power consumption of 1.2 W for the 8:1 MUX and 1.0 W for the 1:8 DEMUX. This is the lowest power consumption yet reported for 10-Gb/s 8:1 MUX and 1:8 DEMUX.

We experimentally demonstrate the ultrafast and high-repetition capabilities of a polarization-discriminating symmetric Mach-Zehnder (PD-SMZ) all-optical switch. This switch, as well as an original symmetric Mach-Zehnder (SMZ) all-optical switch, is based on a highly efficient but slowly relaxing band-filling effect that is resonantly excited in a passive InGaAsP bulk waveguide. By using a mechanism that cancels out the effect of the slow relaxation, ultrafast switching is attained. We achieve a switching time of 200 fs and demultiplexing of 1.5 Tbps, showing the applicability of the SMZ or PD-SMZ all-optical switches to optical demultiplexing of well over 1 Tbps for the first time. High-repetition capability, which is another important issue apart from the switching speed, is also verified by using control pulses at a repetition rate of 10.5 GHz. We also discuss the use of nonlinearity in a semiconductor optical amplifier to further reduce the control-pulse energy.

To enhance the extinction ratio (ER) of NRZ-to-inverted-RZ converter based on cross-gain compression of a semiconductor optical amplifier (SOA), a modified terahertz optical asymmetric demultiplexer (TOAD) is cascaded. ER is improved from 1.6-6.7 dB to 5.4-14.5 dB, depending on the intensity of input optical NRZ signal. The proposed NRZ-to-inverted-RZ converter enhances and regulates ER to a high value (14.5 dB) for very wide optical NRZ signal intensity range.

To enhance the extinction ratio (ER) of NRZ-to-inverted-RZ converter based on cross-gain compression of a semiconductor optical amplifier (SOA), a modified terahertz optical asymmetric demultiplexer (TOAD) is cascaded. ER is improved from 1.6-6.7 dB to 5.4-14.5 dB, depending on the intensity of input optical NRZ signal. The proposed NRZ-to-inverted-RZ converter enhances and regulates ER to a high value (14.5 dB) for very wide optical NRZ signal intensity range.